Just some more info for the simple pool:
PPLNS is over 1,000,000 shares so it takes a while to get the payout from one share.
Some blocks weren't paying, but I manually kicked them through the pipes so there should be a fresh (2k unspent in the pool + 1.6k from me = 3.6k) payout to the pool. Hopefully it's smooth sailing from here.
Right now the pushpool is running 56 MH/s and p2pool is at 22 MH/s.
Topic: [ANN][FC] FC Simple Pool - dontmine.me [LP/Stratum] - page 8. (Read 11788 times)
p2pool works fine and for some reason i cant connect to other pool?
Paul21, I've PM'd you with a question about my account.
Cheers
Cheers
Been throwing my 200kh/s for last night and today, loving it
So we can go from p2pool to here? yes?
I've been getting steady payouts from this pool, and blocks are being found every few minutes. Good job Paul21!
I've updated cgminer to latest version, now receiving rewards. Thanks!
getting plenty of payments, it's even valuable to mine with just your CPU instead of GPU, still getting about 1.xx FC every 20 mins or so
Didn't get any reward either, though 14 shares were accepted (110 Kh/s rate)
bump, very good pool. I caqn confirm that I got paid.
Thanks for your work on this Paul. I will link this thread into the FC post.
For some reason I'm just getting:
Stratum from pool 0 requested work restart
Over and over again. Its been doing this for about 5 minutes.
Anyone know how to stop this and actually start mining? I wanna send my 800khash over
Stratum from pool 0 requested work restart
Over and over again. Its been doing this for about 5 minutes.
Anyone know how to stop this and actually start mining? I wanna send my 800khash over
I'm not showing up either
6naEoE47MgCm8wbHjyA38EHiEWmSvrjusc
6naEoE47MgCm8wbHjyA38EHiEWmSvrjusc
Can you mine on other scrypt chains... BBQ, LTC?
Yes I mine BQC and LTC regularly. The mining program shows shares being generated but my payout address is not showing up on the website, therefore it is not recognizing it for some reason.
My address is: 6u8RCArB9iwshk3xxToiCk3uXPGWDuSnR9 if someone would like to investigate.
I modified P2Pool to work with feathercoind, but not with other peers, so it's just a hack (see https://bitcointalksearch.org/topic/m.1869269 )
cgminer:
--scrypt -o stratum+tcp://fpool1.zapto.org:19327 -s 1 --expiry 1 --queue 0 -u PUT_YOUR_FC_ADDR_HERE -p x (and other tuning stuff)
other:
url: stratum+tcp://fpool1.zapto.org:19327 or http://fpool1.zapto.org:19327 for LP
user: Your FC address for payout
pass: anything "x"
http://fpool1.zapto.org:19327/static/ (you'll see LTC all over it, and the explorer addresses don't work)
Check the bottom for your payout address once you get a share.
It's PPLNS with the last hour of shares instead of the typical 24
Currently the pool finds a block about every 4 minutes with 21 MH/s connected, 5-10% DOA+Orphan
cgminer:
--scrypt -o stratum+tcp://fpool1.zapto.org:19327 -s 1 --expiry 1 --queue 0 -u PUT_YOUR_FC_ADDR_HERE -p x (and other tuning stuff)
other:
url: stratum+tcp://fpool1.zapto.org:19327 or http://fpool1.zapto.org:19327 for LP
user: Your FC address for payout
pass: anything "x"
http://fpool1.zapto.org:19327/static/ (you'll see LTC all over it, and the explorer addresses don't work)
Check the bottom for your payout address once you get a share.
It's PPLNS with the last hour of shares instead of the typical 24
Currently the pool finds a block about every 4 minutes with 21 MH/s connected, 5-10% DOA+Orphan
I confirm it works and I have been receiving payouts to my FC address each time a block is found
I am mining for a while now at 400kh, found a lot of share but I did not get any payout yet. and I am not in the list..
my address is: 6zxsvnz4zRiWPthm7hBXeBRhJt1JLnh6j7
COuld you check what's happening ?
THanks
Can you mine on other scrypt chains... BBQ, LTC?
I can not confirm it works as my payout address is not appearing on the pool site after over an hour mining.
Just by chance are you using GuiMiner?
Something tells me that + P2Pool is a bad mix right now.
I am using cgminer 2.11.4
no I'm using cgminer 2.11.3
Working peachy for me with cgminer also
I can not confirm it works as my payout address is not appearing on the pool site after over an hour mining.
Just by chance are you using GuiMiner?
Something tells me that + P2Pool is a bad mix right now.
I am using cgminer 2.11.4
Jump to: