[ANN][GCH] Galaxy Cash, PoW, PoS, Multialgo, Masternodes, No Premine - page 4.

GalaxyCash

member

Activity: 195

Merit: 10

Quote from: jbmustaq on March 04, 2018, 12:39:14 AM

Quote from: GalaxyCash on March 02, 2018, 12:44:40 PM

Vote for protocol change on https://galaxycash.info, one vote everyday.
This will help to improve the current state of coin, prices for MN not final and will be discussed after vote.
New protocol will be launched after 100K block.
Results of voting will be take after week.

What will happen to the existing MN's also Is it possible if you can get the coin listed in graviex.net. It's free and does not need a listing fee. I could have done it but they require a direct contact with Dev for coin to be listed.

No response from graviex.net

jbmustaq

full member

Activity: 445

Merit: 100

Quote from: GalaxyCash on March 02, 2018, 12:44:40 PM

Vote for protocol change on https://galaxycash.info, one vote everyday.
This will help to improve the current state of coin, prices for MN not final and will be discussed after vote.
New protocol will be launched after 100K block.
Results of voting will be take after week.

What will happen to the existing MN's also Is it possible if you can get the coin listed in graviex.net. It's free and does not need a listing fee. I could have done it but they require a direct contact with Dev for coin to be listed.

GalaxyCash

member

Activity: 195

Merit: 10

Vote for protocol change on https://galaxycash.info, one vote everyday.
This will help to improve the current state of coin, prices for MN not final and will be discussed after vote.
New protocol will be launched after 100K block.
Results of voting will be take after week.

GalaxyCash

member

Activity: 195

Merit: 10

You need set in yiimp coin config "RPC Type" as POS

Porter980

newbie

Activity: 24

Merit: 0

Quote from: GalaxyCash on March 01, 2018, 04:20:46 PM

Quote from: Porter980 on March 01, 2018, 02:54:15 PM

Quote from: Porter980 on March 01, 2018, 08:46:43 AM

Hi guys!
I installed a pool for a coin GCH, started the blake2s algorithm, try to connect for 30-60 minutes, whether there will be a payout, or I'm sitting alone ... like there are no errors, but Earnings is empty. I do not understand yet what's the matter.
Write impressions
http://212.47.227.141

Help me please...
In /var/stratum/stratum.log:

Code:

22:42:53: ERROR GalaxyCash Block decode failed
22:43:08: ERROR GalaxyCash Block decode failed
22:43:13: ERROR GalaxyCash Block decode failed
22:43:18: ERROR GalaxyCash Block decode failed
22:43:24: ERROR GalaxyCash Block decode failed
22:43:35: ERROR GalaxyCash Block decode failed
22:43:56: ERROR GalaxyCash Block decode failed
22:43:59: ERROR GalaxyCash Block decode failed

/var/stratum/reject.log:

Code:

2018-03-01 22:43:35: REJECTED GCH block 48625
2018-03-01 22:43:56: REJECTED GCH block 48625
2018-03-01 22:43:59: REJECTED GCH block 48625
2018-03-01 22:44:23: REJECTED GCH block 48626
2018-03-01 22:44:29: REJECTED GCH block 48626

/var/stratum/client.log:

Code:

bad mining address
unable to find the wallet for coinid 1486..

/home/useer/.galaxycash/debug.log:

Code:

ERROR: CheckProofOfWork() : hash doesn't match nBits
ERROR: CheckBlockHeader() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
ERROR: CheckProofOfWork() : hash doesn't match nBits
ERROR: CheckBlockHeader() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
ERROR: CheckProofOfWork() : hash doesn't match nBits
ERROR: CheckBlockHeader() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
ERROR: CheckProofOfWork() : hash doesn't match nBits
ERROR: CheckBlockHeader() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
connect() to 193.124.0.135:7604 failed after select(): No route to host
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Misbehaving: 74.103.154.124:7604 (0 -> 1)
ProcessMessage(dseep, 116 bytes) FAILED
connect() to 45.117.82.106:7604 failed after select(): Connection refused
ERROR: CheckProofOfWork() : hash doesn't match nBits
ERROR: CheckBlockHeader() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
ERROR: CheckProofOfWork() : hash doesn't match nBits
ERROR: CheckBlockHeader() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep

You set algorithm in config? If you pool for Blake2s you need set blake2s algo in config - algo=blake2s

That's exactly because I thought that somewhere you need to correctly register)))
But not correctly in the config wrote.
I wrote the algorithm = blake2c, but it was necessary algo .....)))
I checked getminingalgo, issues "x12" and looked where ...

1. Now there is nothing in the log /var/stratum/reject.log
2. /var/stratum/config/blake2s.log:

Code:

22:53:40: ERROR: rpc_do_call: 127.0.0.1:14860 500
22:53:40: ERROR GalaxyCash Block decode failed
22:53:40: *** REJECTED :( GalaxyCash block 48629 4 txs
22:53:45: GCH 48629 - diff 10.280692939 job 19 to 1/1/1 clients, hash 7952.122/$
2018-03-02 00:03:46 [198.13.34.110] , blake2s, bad json
00:03:46: N��Nversion
2018-03-02 01:35:17 [198.13.34.110] , blake2s, bad json
01:35:17: N��Nversion
2018-03-02 02:19:29 [198.13.34.110] , blake2s, bad json
02:19:29: N��Nversion
04:39:26: disconnecting from coind GCH

At this point, I registered in the config "algo=blake2s" and restarted the daemon

Code:

04:40:51: connecting to coind GCH
04:41:15: submit 109.187.0.97 (uid 1) 483, e3010000, 5a98aba4, 0b47a96c, 12.000
04:41:22: submit 109.187.0.97 (uid 1) 483, d3030000, 5a98aba4, 0a932d2b, 17.000
04:41:26: submit 109.187.0.97 (uid 1) 483, a1040000, 5a98aba4, 06452ff4, 5.000/
04:41:26: submit 109.187.0.97 (uid 1) 483, 7a040000, 5a98aba4, 08049b77, 397.00
04:41:29: submit 109.187.0.97 (uid 1) 483, 3c050000, 5a98aba4, 05bbe7be, 19.000
.
.
.
06:28:16: GCH 48849 - diff 17375.182089601 job 269 to 1/1/1 clients, hash 5789.437/1243763.981 in 0.4 ms
06:29:18: GCH 48849 - diff 17375.182089601 job 26a to 1/1/1 clients, hash 4536.672/1243763.981 in 0.1 ms
06:30:00: GCH 48849 - diff 17375.182089601 job 26b to 1/1/1 clients, hash 2903.470/1243763.981 in 0.1 ms
06:30:21: GCH 48849 - diff 17375.182089601 job 26c to 1/1/1 clients, hash 4069.976/1243763.981 in 0.2 ms
06:30:42: GCH 48849 - diff 17375.182089601 job 26d to 1/1/1 clients, hash 4129.581/1243763.981 in 0.2 ms
06:31:05: submit 109.187.0.97 (uid 1) 621, 90050000, 5a98c55e, 057827d3, 801.000/26.000
06:31:45: GCH 48849 - diff 17375.182089601 job 26e to 1/1/1 clients, hash 3686.825/1243763.981 in 0.5 ms
06:32:49: GCH 48849 - diff 17375.182089601 job 26f to 1/1/1 clients, hash 2446.759/1243763.981 in 0.3 ms
06:32:49: GCH 48850 - diff 17375.182089601 job 270 to 1/1/1 clients, hash 3538.759/1243763.981 in 0.0 ms
06:33:03: submit 109.187.0.97 (uid 1) 624, 3c030000, 5a98c5de, 01a2492e, 558.000/26.000
2018-03-02 06:51:04 [94.249.167.246] , blake2s, bad json - [b]here I disconnected[/b]

getinfo:

Code:

{
    "version": 2000003,
    "protocolversion": 90915,
    "walletversion": 60000,
    "balance": 0.11,
    "newmint": 0,
    "stake": 0,
    "blocks": 48869,
    "timeoffset": -3,
    "moneysupply": 2886550,
    "connections": 18,
    "proxy": "",
    [b]"ip": "0.0.0.0",[/b] - this is normal?
    "algorithm": "blake2s",
    "difficulty": {
        "proof-of-work": 16702.64627303,
        "proof-of-stake": 504365055,
        "proof-of-work-x12": 6.73270299,
        "proof-of-work-x13": 1716.65878997,
        "proof-of-work-x11": 15265.98525617,
        "proof-of-work-sha256d": 1892163.9617401,
        "proof-of-work-blake2s": 16702.64627303
    },
    "testnet": false,
    "keypoololdest": "2018-03-01 05:56:00 +0000",
    "keypoolsize": 101,
    "paytxfee": 1.0e-6,
    "mininput": 0,
    "errors": ""
}

/home/useer/.galaxycash/debug.log:

Code:

Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Misbehaving: 68.235.38.177:7604 (0 -> 1)
ProcessMessage(dseep, 116 bytes) FAILED
Prcessing command dseep
Misbehaving: 68.235.38.177:7604 (1 -> 2)
ProcessMessage(dseep, 116 bytes) FAILED
Misbehaving: 68.235.38.177:7604 (2 -> 3)
ProcessMessage(dseep, 116 bytes) FAILED
Misbehaving: 68.235.38.177:7604 (3 -> 4)
ProcessMessage(dseep, 116 bytes) FAILED
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
keypool reserve 7
keypool return 7
PoW Masternode payment to GS6YmcpPAmkvYsjz87QtYHjCSYiESvtqNJ
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
connect() to 193.124.0.135:7604 failed after select(): No route to host
Prcessing command dseep
connect() to 45.117.82.106:7604 failed after select(): Connection refused

But 2 hours "Last 50 earnings:" - empty
Documentation is not enough ... or I'm not looking there?
Where to look next?

GalaxyCash

member

Activity: 195

Merit: 10

Quote from: Porter980 on March 01, 2018, 02:54:15 PM

Quote from: Porter980 on March 01, 2018, 08:46:43 AM

Hi guys!
I installed a pool for a coin GCH, started the blake2s algorithm, try to connect for 30-60 minutes, whether there will be a payout, or I'm sitting alone ... like there are no errors, but Earnings is empty. I do not understand yet what's the matter.
Write impressions
http://212.47.227.141

Help me please...
In /var/stratum/stratum.log:

Code:

22:42:53: ERROR GalaxyCash Block decode failed
22:43:08: ERROR GalaxyCash Block decode failed
22:43:13: ERROR GalaxyCash Block decode failed
22:43:18: ERROR GalaxyCash Block decode failed
22:43:24: ERROR GalaxyCash Block decode failed
22:43:35: ERROR GalaxyCash Block decode failed
22:43:56: ERROR GalaxyCash Block decode failed
22:43:59: ERROR GalaxyCash Block decode failed

/var/stratum/reject.log:

Code:

2018-03-01 22:43:35: REJECTED GCH block 48625
2018-03-01 22:43:56: REJECTED GCH block 48625
2018-03-01 22:43:59: REJECTED GCH block 48625
2018-03-01 22:44:23: REJECTED GCH block 48626
2018-03-01 22:44:29: REJECTED GCH block 48626

/var/stratum/client.log:

Code:

bad mining address
unable to find the wallet for coinid 1486..

/home/useer/.galaxycash/debug.log:

Code:

ERROR: CheckProofOfWork() : hash doesn't match nBits
ERROR: CheckBlockHeader() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
ERROR: CheckProofOfWork() : hash doesn't match nBits
ERROR: CheckBlockHeader() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
ERROR: CheckProofOfWork() : hash doesn't match nBits
ERROR: CheckBlockHeader() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
ERROR: CheckProofOfWork() : hash doesn't match nBits
ERROR: CheckBlockHeader() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
connect() to 193.124.0.135:7604 failed after select(): No route to host
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Misbehaving: 74.103.154.124:7604 (0 -> 1)
ProcessMessage(dseep, 116 bytes) FAILED
connect() to 45.117.82.106:7604 failed after select(): Connection refused
ERROR: CheckProofOfWork() : hash doesn't match nBits
ERROR: CheckBlockHeader() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
ERROR: CheckProofOfWork() : hash doesn't match nBits
ERROR: CheckBlockHeader() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep

You set algorithm in config? If you pool for Blake2s you need set blake2s algo in config - algo=blake2s

Porter980

newbie

Activity: 24

Merit: 0

Quote from: Porter980 on March 01, 2018, 08:46:43 AM

Hi guys!
I installed a pool for a coin GCH, started the blake2s algorithm, try to connect for 30-60 minutes, whether there will be a payout, or I'm sitting alone ... like there are no errors, but Earnings is empty. I do not understand yet what's the matter.
Write impressions
http://212.47.227.141

Help me please...
In /var/stratum/stratum.log:

Code:

22:42:53: ERROR GalaxyCash Block decode failed
22:43:08: ERROR GalaxyCash Block decode failed
22:43:13: ERROR GalaxyCash Block decode failed
22:43:18: ERROR GalaxyCash Block decode failed
22:43:24: ERROR GalaxyCash Block decode failed
22:43:35: ERROR GalaxyCash Block decode failed
22:43:56: ERROR GalaxyCash Block decode failed
22:43:59: ERROR GalaxyCash Block decode failed

/var/stratum/reject.log:

Code:

2018-03-01 22:43:35: REJECTED GCH block 48625
2018-03-01 22:43:56: REJECTED GCH block 48625
2018-03-01 22:43:59: REJECTED GCH block 48625
2018-03-01 22:44:23: REJECTED GCH block 48626
2018-03-01 22:44:29: REJECTED GCH block 48626

/var/stratum/client.log:

Code:

bad mining address
unable to find the wallet for coinid 1486..

/home/useer/.galaxycash/debug.log:

Code:

ERROR: CheckProofOfWork() : hash doesn't match nBits
ERROR: CheckBlockHeader() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
ERROR: CheckProofOfWork() : hash doesn't match nBits
ERROR: CheckBlockHeader() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
ERROR: CheckProofOfWork() : hash doesn't match nBits
ERROR: CheckBlockHeader() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
ERROR: CheckProofOfWork() : hash doesn't match nBits
ERROR: CheckBlockHeader() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
connect() to 193.124.0.135:7604 failed after select(): No route to host
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Misbehaving: 74.103.154.124:7604 (0 -> 1)
ProcessMessage(dseep, 116 bytes) FAILED
connect() to 45.117.82.106:7604 failed after select(): Connection refused
ERROR: CheckProofOfWork() : hash doesn't match nBits
ERROR: CheckBlockHeader() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
ERROR: CheckProofOfWork() : hash doesn't match nBits
ERROR: CheckBlockHeader() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep
Prcessing command dseep

Porter980

newbie

Activity: 24

Merit: 0

Hi guys!
I installed a pool for a coin GCH, started the blake2s algorithm, try to connect for 30-60 minutes, whether there will be a payout, or I'm sitting alone ... like there are no errors, but Earnings is empty. I do not understand yet what's the matter.
Write impressions
http://212.47.227.141

Porter980

newbie

Activity: 24

Merit: 0

Quote from: Porter980 on February 28, 2018, 07:25:24 AM

Code:

gcc is already the newest version (4:5.3.1-1ubuntu1).
gcc set to manually installed.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

download wallet for ubuntu from github:

Code:

ol@scw-6d5677:~$ ./galaxycashd
bash: ./galaxycashd: cannot execute binary file: Exec format error

Sorry!!! i am nub, install ARM Ubuntu.... Tongue

jbmustaq

full member

Activity: 445

Merit: 100

Dev,

https://graviex.net is listing the coin for free and has good volume. Please list the coin there. Below are the details about listing the coin in there website.

GRAVIEX Listing rules Updated: Feb 11 Official listing rules Coin Developer should publish GRAVIEX banner (https://i.imgur.com/lLE6iEW.png) in his ANN thread. We reserve the right to add a comment with more extensive information about the exchange in the ANN thread. Coin Developer should inform GRAVIEX staff using any official channel (preferably - https://t.me/graviex) about changes in the coin network (hard-forks, new releases) Coin Developer should inform GRAVIEX staff using any official channel (preferably - https://t.me/graviex) about relevance of the coin information, that was located on the Funds page (https://graviex.net/funds) Coin Developer should provide contact information for the urgent and operational communication. Minimum monthly trading volume should exceed 5 BTC. In case of absence of necessary volumes the GRAVIEX reserves the right to raise the issue of delisting the coin by notifying the developer of the coin. Once and when listing procedure was completed - Coin Developer must take care information about the GRAVIEX Exchange to be exposed on the same resources where information about coin is represented (official site, ANN thread, twitter, facebook & etc). Once and when listing procedure was completed - Coin Developer must to join GRAVIEX Official Coin Developers telegram group (invitation will be send only though official channel to the coin developer). Banner Banner URL - https://i.imgur.com/lLE6iEW.png The page works check again https://www.gravio.net/blog/graviex-listing-rules

Porter980

newbie

Activity: 24

Merit: 0

Code:

gcc is already the newest version (4:5.3.1-1ubuntu1).
gcc set to manually installed.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

download wallet for ubuntu from github:

Code:

ol@scw-6d5677:~$ ./galaxycashd
bash: ./galaxycashd: cannot execute binary file: Exec format error

GalaxyCash

member

Activity: 195

Merit: 10

Quote from: Porter980 on February 28, 2018, 05:56:12 AM

Hi!
Ubuntu 16.04, want install wallet:

Code:

pool@scw-6d5677:~/galaxycash$ sudo qmake -makefile galaxycashd.pro
Project MESSAGE: Building with UPNP support

Then launch Make and this errors:

Code:

pool@scw-6d5677:~/galaxycash$ sudo make
cd /home/pool/galaxycash/src/leveldb && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -O2" libleveldb.a libmemenv.a
make[1]: Entering directory '/home/pool/galaxycash/src/leveldb'
g++ -I. -I./include -fno-builtin-memcmp -pthread -DOS_LINUX -DLEVELDB_PLATFORM_POSIX -pipe -fstack-protector-all --param ssp-buffer-size=1 -O2 -c db/builder.cc -o db/builder.o
In file included from ./port/port_posix.h:50:0,
                 from ./port/port.h:14,
                 from ./db/filename.h:14,
                 from db/builder.cc:7:
./port/atomic_pointer.h:212:2: error: #error Please implement AtomicPointer for this platform.
 #error Please implement AtomicPointer for this platform.
  ^
Makefile:211: recipe for target 'db/builder.o' failed
make[1]: *** [db/builder.o] Error 1
make[1]: Leaving directory '/home/pool/galaxycash/src/leveldb'
Makefile:587: recipe for target '/home/pool/galaxycash/src/leveldb/libleveldb.a' failed
make: *** [/home/pool/galaxycash/src/leveldb/libleveldb.a] Error 2

With - chmod 755 src/leveldb/build_detect_platform all ready apply.

How to remove an error?

Install latest gcc or download wallet for ubuntu from github

Porter980

newbie

Activity: 24

Merit: 0

Hi!
Ubuntu 16.04, want install wallet:

Code:

pool@scw-6d5677:~/galaxycash$ sudo qmake -makefile galaxycashd.pro
Project MESSAGE: Building with UPNP support

Then launch Make and this errors:

Code:

pool@scw-6d5677:~/galaxycash$ sudo make
cd /home/pool/galaxycash/src/leveldb && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -O2" libleveldb.a libmemenv.a
make[1]: Entering directory '/home/pool/galaxycash/src/leveldb'
g++ -I. -I./include -fno-builtin-memcmp -pthread -DOS_LINUX -DLEVELDB_PLATFORM_POSIX -pipe -fstack-protector-all --param ssp-buffer-size=1 -O2 -c db/builder.cc -o db/builder.o
In file included from ./port/port_posix.h:50:0,
                 from ./port/port.h:14,
                 from ./db/filename.h:14,
                 from db/builder.cc:7:
./port/atomic_pointer.h:212:2: error: #error Please implement AtomicPointer for this platform.
 #error Please implement AtomicPointer for this platform.
  ^
Makefile:211: recipe for target 'db/builder.o' failed
make[1]: *** [db/builder.o] Error 1
make[1]: Leaving directory '/home/pool/galaxycash/src/leveldb'
Makefile:587: recipe for target '/home/pool/galaxycash/src/leveldb/libleveldb.a' failed
make: *** [/home/pool/galaxycash/src/leveldb/libleveldb.a] Error 2

With - chmod 755 src/leveldb/build_detect_platform all ready apply.

How to remove an error?

Galapagos

copper member

Activity: 129

Merit: 2

Quote from: qwerty92 on February 27, 2018, 12:35:41 PM

Quote from: Galapagos on February 27, 2018, 09:10:38 AM

Hi, I'm trying to build the wallet on linux (really a newbie) and following the instructions on github but I'm getting this error:

***************************
sudo make
cd /home/giampi/galaxycash/src/leveldb && CC=gcc CXX=g++ make OPT="-m64 -pipe -fstack-protector-all --param ssp-buffer-size=1 -O2" libleveldb.a libmemenv.a
make[1]: Entering directory '/home/beppe/galaxycash/src/leveldb'
/bin/sh: 1: ./build_detect_platform: Permission denied
Makefile:18: build_config.mk: No such file or directory
make[1]: *** No rule to make target 'build_config.mk'. Stop.
make[1]: Leaving directory '/home/giampi/galaxycash/src/leveldb'

****************************

I believe that I've installed all the needed dependency but I'm doing something wrong.....
Can somebody help?

Ciao (are you italian?), this is a permission issue. Try with chmod 755 src/leveldb/build_detect_platform then make.
If it doesn't work check path before making. I see two different path... In the first line there is "giampi" as user but the making path get "beppe" as user and the leaving dir command gives you "giampi" again.

Thank you!! it worked perfectly.
About the different path I just randomly changed the user name to paste it here.

qwerty92

newbie

Activity: 33

Merit: 0

Quote from: Galapagos on February 27, 2018, 09:10:38 AM

Hi, I'm trying to build the wallet on linux (really a newbie) and following the instructions on github but I'm getting this error:

***************************
sudo make
cd /home/giampi/galaxycash/src/leveldb && CC=gcc CXX=g++ make OPT="-m64 -pipe -fstack-protector-all --param ssp-buffer-size=1 -O2" libleveldb.a libmemenv.a
make[1]: Entering directory '/home/beppe/galaxycash/src/leveldb'
/bin/sh: 1: ./build_detect_platform: Permission denied
Makefile:18: build_config.mk: No such file or directory
make[1]: *** No rule to make target 'build_config.mk'. Stop.
make[1]: Leaving directory '/home/giampi/galaxycash/src/leveldb'

****************************

I believe that I've installed all the needed dependency but I'm doing something wrong.....
Can somebody help?

Ciao (are you italian?), this is a permission issue. Try with chmod 755 src/leveldb/build_detect_platform then make.
If it doesn't work check path before making. I see two different path... In the first line there is "giampi" as user but the making path get "beppe" as user and the leaving dir command gives you "giampi" again.

Galapagos

copper member

Activity: 129

Merit: 2

Hi, I'm trying to build the wallet on linux (really a newbie) and following the instructions on github but I'm getting this error:

***************************
sudo make
cd /home/giampi/galaxycash/src/leveldb && CC=gcc CXX=g++ make OPT="-m64 -pipe -fstack-protector-all --param ssp-buffer-size=1 -O2" libleveldb.a libmemenv.a
make[1]: Entering directory '/home/beppe/galaxycash/src/leveldb'
/bin/sh: 1: ./build_detect_platform: Permission denied
Makefile:18: build_config.mk: No such file or directory
make[1]: *** No rule to make target 'build_config.mk'. Stop.
make[1]: Leaving directory '/home/giampi/galaxycash/src/leveldb'

****************************

I believe that I've installed all the needed dependency but I'm doing something wrong.....
Can somebody help?

qwerty92

newbie

Activity: 33

Merit: 0

Quote from: evilcrypto on February 21, 2018, 03:12:15 PM

Anyone succeeded to run a masternode ?

Multiple masternodes for me. If you need help ask on discord channel please!

qwerty92

newbie

Activity: 33

Merit: 0

Not only coinsmarkets... Cryptohub is avaiable here.
https://cryptohub.online/market/GCH/

Vote for list on VCex too. It's free!
https://acc.vicex.io/acc/listing

bad name

member

Activity: 324

Merit: 10