Pages:
Author

Topic: [ANN]GenesisCoin|ASIC resistance|Profit calculator, chart, automatic update - page 9. (Read 44317 times)

kos
newbie
Activity: 5
Merit: 0
Hi guys,
Can somebody help me? I have Sapphire R280X and with settings in first post I have only HW errors (I use vertminer). Can anybody share with your settings?
I tried set I 12, HW errors is less but hashrate is 250  Sad

P.S sorry for my bad english  Smiley

Did you try our config in the first page?

Yes, hashrate is 350kH/s but a lot of HW errors.

put a little more volts on your cards and use older drivers 13.xx not 14.xx
How much? default is 1.225, drivers 13.4, RAM 8Gb
full member
Activity: 182
Merit: 100
Hi guys,
Can somebody help me? I have Sapphire R280X and with settings in first post I have only HW errors (I use vertminer). Can anybody share with your settings?
I tried set I 12, HW errors is less but hashrate is 250  Sad

P.S sorry for my bad english  Smiley

Did you try our config in the first page?

Yes, hashrate is 350kH/s but a lot of HW errors.

You should try to use cgminer. If it can't help decrease HW error, we will test again with some other configs.
I tried exeminer, no HW but hashrate is 240kH/s

We will try with our 280x to get the correct config, wait a minute Wink
kos
newbie
Activity: 5
Merit: 0
Hi guys,
Can somebody help me? I have Sapphire R280X and with settings in first post I have only HW errors (I use vertminer). Can anybody share with your settings?
I tried set I 12, HW errors is less but hashrate is 250  Sad

P.S sorry for my bad english  Smiley

Did you try our config in the first page?

Yes, hashrate is 350kH/s but a lot of HW errors.

You should try to use cgminer. If it can't help decrease HW error, we will test again with some other configs.
I tried exeminer, no HW but hashrate is 240kH/s
newbie
Activity: 32
Merit: 0
full member
Activity: 182
Merit: 100


Please wait some more minutes, don't turn off wallet. Our node still connected to network system.

Wallet is already open eight hours, or can not synchronize updates? Pool full of coins not receive

Did you try downloading the wallet data in the first page?
There are in accordance with the first page to download, or not, many times to repeat the installation


We can still download the data package. Maybe something wrong with your network.
You may try run your wallet as administrator and turnoff firewall.
newbie
Activity: 6
Merit: 0


Please wait some more minutes, don't turn off wallet. Our node still connected to network system.
Wallet is already open eight hours, or can not synchronize updates? Pool full of coins not receive

Did you try downloading the wallet data in the first page?
[/quote]
There are in accordance with the first page to download, or not, many times to repeat the installation
full member
Activity: 182
Merit: 100


Please wait some more minutes, don't turn off wallet. Our node still connected to network system.
Wallet is already open eight hours, or can not synchronize updates? Pool full of coins not receive
[/quote]

Did you try downloading the wallet data in the first page?
newbie
Activity: 6
Merit: 0


Please wait some more minutes, don't turn off wallet. Our node still connected to network system.
[/quote]
Wallet is already open eight hours, or can not synchronize updates? Pool full of coins not receive
full member
Activity: 182
Merit: 100
Has been configured according to the first page, wallet or no update, how to do???

Please wait some more minutes, don't turn off wallet. Our node still connected to network system.
newbie
Activity: 6
Merit: 0
Has been configured according to the first page, wallet or no update, how to do???
full member
Activity: 182
Merit: 100
Hi all,

Our chart will be like this:



The profit display here is the difference between the coin at 24 hours ago and the coin at that time.

P/S: Don't forget to vote for us:
====>>>VOTE FOR US TO BE LISTED IN COINEDUP HERE<<<====
====>>> VOTE FOR US TO BE LISTED IN CRYPTSY HERE <<<====
====>>> VOTE FOR US TO BE LISTED IN MINTPAL <<<====
====>>>VOTE FOR US TO BE LISTED IN CRYPTORUSH HERE<<<====

sr. member
Activity: 308
Merit: 250
Quote from: pttinh
DO YOU BELIEVE THAT WE CAN BE LISTED IN BIG EXCHANGES?

I believe, but the price still low, hic hic.

Hope that price will increase when we hit a big exchange and after we implement new features for our coin Wink

no, the exact oposite will happen. I dont understand why so much ppl think the bigger the exchanges, the better the price will be ?
The bigger the supermarket gets, the cheaper the prices must be ...

If ppl are rly interested in the coin and not the pump&dump, only one exchange is enough.
newbie
Activity: 55
Merit: 0
Hi guys,
Can somebody help me? I have Sapphire R280X and with settings in first post I have only HW errors (I use vertminer). Can anybody share with your settings?
I tried set I 12, HW errors is less but hashrate is 250  Sad

P.S sorry for my bad english  Smiley


ok , I will post mine, with my 280x Saphire dual-x, as u can see in this picture, its rock solid, 0 HW, and very very stable

https://i.imgur.com/JRtBtr2.jpg

As u can see i get 366khas over each GPU, and a Work utility over 90%, I use Bamt 1.5 modified by me, with 13.12 ATI drivers, Sgminer 1.4.1 recompiled by me, with new kernels and modified .bin files, if the comunity asks for it, I could share my distro too, so people can burn it, and get it done in an instant, but i will have to remake it a bit, so i can make it special for GNS xDD, and translate it in english ( I have it in spanish mostly for my friends here in my town )

my config is :

{
"pools" : [
   {
      "url" : "stratum+tcp://gns.pool.mn:3333",
      "user" : "",
      "pass" : ""
   },
   {
      "url" : "stratum+tcp://gns.eu.stratum.coins4everyone.com:3474",
      "user" : "",
      "pass" : ""
   }
]
,
"gpu-fan" : "0-100",
"auto-fan" : true,
"temp-cutoff" : "84",
"intensity" : "13",
"worksize" : "256",
"kernel" : "xfear", ( U HAVE TO CHANGE THIS to   "kernel" : "scrypt",  or delete the line simply, I can share the BIN files that this kernel generates too, if someone wants them )
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"gpu-threads" : "2",
"gpu-engine" : "1020",
"gpu-memclock" : "1500",
"api-listen" : true,
"api-port" : "4028",
"nfactor" : "11",  ( IF u USE VERTMINER DELETE THIS LINE TOO )
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"api-allow" : "W:127.0.0.1"
}


I hope someone is helped with this conf file
sr. member
Activity: 294
Merit: 250
Hi guys,
Can somebody help me? I have Sapphire R280X and with settings in first post I have only HW errors (I use vertminer). Can anybody share with your settings?
I tried set I 12, HW errors is less but hashrate is 250  Sad

P.S sorry for my bad english  Smiley

Did you try our config in the first page?

Yes, hashrate is 350kH/s but a lot of HW errors.

put a little more volts on your cards and use older drivers 13.xx not 14.xx
full member
Activity: 182
Merit: 100
Hi guys,
Can somebody help me? I have Sapphire R280X and with settings in first post I have only HW errors (I use vertminer). Can anybody share with your settings?
I tried set I 12, HW errors is less but hashrate is 250  Sad

P.S sorry for my bad english  Smiley

Did you try our config in the first page?

Yes, hashrate is 350kH/s but a lot of HW errors.

You should try to use cgminer. If it can't help decrease HW error, we will test again with some other configs.
kos
newbie
Activity: 5
Merit: 0
Hi guys,
Can somebody help me? I have Sapphire R280X and with settings in first post I have only HW errors (I use vertminer). Can anybody share with your settings?
I tried set I 12, HW errors is less but hashrate is 250  Sad

P.S sorry for my bad english  Smiley

Did you try our config in the first page?

Yes, hashrate is 350kH/s but a lot of HW errors.
full member
Activity: 182
Merit: 100
Hi guys,
Can somebody help me? I have Sapphire R280X and with settings in first post I have only HW errors (I use vertminer). Can anybody share with your settings?
I tried set I 12, HW errors is less but hashrate is 250  Sad

P.S sorry for my bad english  Smiley

Did you try our config in the first page?
kos
newbie
Activity: 5
Merit: 0
Hi guys,
Can somebody help me? I have Sapphire R280X and with settings in first post I have only HW errors (I use vertminer). Can anybody share with your settings?
I tried set I 12, HW errors is less but hashrate is 250  Sad

P.S sorry for my bad english  Smiley
newbie
Activity: 5
Merit: 0
Pages:
Jump to: