I already have Windows Server VPS. Can I run if enabled wallet as a server?
Yes, you can. Or you can use a daemon compiled for Windows. The Qt wallet configured as a server will work (same config settings as described above), but you have to remote desktop into the machine and leave it running with it disconnected. 
Topic: [ANN][GRAV] Graviton SHA, Gravitate, Gravitators, *HARDFORK 67000 6/19* - page 44. (Read 56180 times)
May 04, 2015, 03:12:26 AM
May 04, 2015, 01:46:36 AM
We should all make an effort to tweet on Twitter and let @CryptoCurrencyX and @BittrexExchange know that you are interested in being able to trade $GRAV there...
More info tomorrow on the design of RAVE and how it will work.
If anyone needs help with getting a Gravitator node working, please post and I'm sure between myself and the community we can help get you going.
More info tomorrow on the design of RAVE and how it will work.
If anyone needs help with getting a Gravitator node working, please post and I'm sure between myself and the community we can help get you going.
ok,,can you give a short instruction on how to set a masternode?
thanks.
1. Get a small VPS, compile the daemon and copy it up to the VPS, run it and let it sync.
2. In Graviton wallet, go to the Gravitators tab and click Create.
3. In the alias field put a name to call it, in the address field put the IP address of the VPS and the port. You can use the default port which is 31321, so IP:31321 (e.g. 111.222.333.444:31321).
4. Click OK, then highlight the row and click Get Config.
5. Stop gravitond on VPS. In ~/.graviton/graviton.conf copy and paste the text from Get Config. Also make sure to include staking=0. Replace the spots that say to replcae them, with the right values.
6. Start gravitond on VPS.
7. Send 25000 GRAV to the address generated for the node (highlight the row on My Gravitator Nodes and click Copy Address).
8. Wait for 7 confirms.
9. Select the gravitator on the My Gravitator Nodes tab and click Start.
10. Wait and eventually you will start receiving payments.
How to run the Windows Server VPS?
why windows..just run ubuntu...i think windows server is more expensive to rent
I already have Windows Server VPS. Can I run if enabled wallet as a server?
May 04, 2015, 01:28:11 AM
We should all make an effort to tweet on Twitter and let @CryptoCurrencyX and @BittrexExchange know that you are interested in being able to trade $GRAV there...
More info tomorrow on the design of RAVE and how it will work.
If anyone needs help with getting a Gravitator node working, please post and I'm sure between myself and the community we can help get you going.
More info tomorrow on the design of RAVE and how it will work.
If anyone needs help with getting a Gravitator node working, please post and I'm sure between myself and the community we can help get you going.
ok,,can you give a short instruction on how to set a masternode?
thanks.
1. Get a small VPS, compile the daemon and copy it up to the VPS, run it and let it sync.
2. In Graviton wallet, go to the Gravitators tab and click Create.
3. In the alias field put a name to call it, in the address field put the IP address of the VPS and the port. You can use the default port which is 31321, so IP:31321 (e.g. 111.222.333.444:31321).
4. Click OK, then highlight the row and click Get Config.
5. Stop gravitond on VPS. In ~/.graviton/graviton.conf copy and paste the text from Get Config. Also make sure to include staking=0. Replace the spots that say to replcae them, with the right values.
6. Start gravitond on VPS.
7. Send 25000 GRAV to the address generated for the node (highlight the row on My Gravitator Nodes and click Copy Address).
8. Wait for 7 confirms.
9. Select the gravitator on the My Gravitator Nodes tab and click Start.
10. Wait and eventually you will start receiving payments.
How to run the Windows Server VPS?
why windows..just run ubuntu...i think windows server is more expensive to rent
May 04, 2015, 01:20:20 AM
We should all make an effort to tweet on Twitter and let @CryptoCurrencyX and @BittrexExchange know that you are interested in being able to trade $GRAV there...
More info tomorrow on the design of RAVE and how it will work.
If anyone needs help with getting a Gravitator node working, please post and I'm sure between myself and the community we can help get you going.
More info tomorrow on the design of RAVE and how it will work.
If anyone needs help with getting a Gravitator node working, please post and I'm sure between myself and the community we can help get you going.
ok,,can you give a short instruction on how to set a masternode?
thanks.
1. Get a small VPS, compile the daemon and copy it up to the VPS, run it and let it sync.
2. In Graviton wallet, go to the Gravitators tab and click Create.
3. In the alias field put a name to call it, in the address field put the IP address of the VPS and the port. You can use the default port which is 31321, so IP:31321 (e.g. 111.222.333.444:31321).
4. Click OK, then highlight the row and click Get Config.
5. Stop gravitond on VPS. In ~/.graviton/graviton.conf copy and paste the text from Get Config. Also make sure to include staking=0. Replace the spots that say to replcae them, with the right values.
6. Start gravitond on VPS.
7. Send 25000 GRAV to the address generated for the node (highlight the row on My Gravitator Nodes and click Copy Address).
8. Wait for 7 confirms.
9. Select the gravitator on the My Gravitator Nodes tab and click Start.
10. Wait and eventually you will start receiving payments.
How to run the Windows Server VPS?
May 04, 2015, 01:03:18 AM
I'm liking this coin alot! Watching it closely and investing! Keep up the good work dev and keep the updates coming! That makes the investors comfortable and they most likely won't dump! Hoping to see this on C-cex or even better Bittrex!! 
gotta love a dev that knows what (he's?) doing, unlike the other half of the devs! i'm expecting ccex at the very least within 12 hours!
May 03, 2015, 11:38:09 PM
I'm liking this coin alot! Watching it closely and investing! Keep up the good work dev and keep the updates coming! That makes the investors comfortable and they most likely won't dump! Hoping to see this on C-cex or even better Bittrex!!
May 03, 2015, 10:40:09 PM
We should all make an effort to tweet on Twitter and let @CryptoCurrencyX and @BittrexExchange know that you are interested in being able to trade $GRAV there...
More info tomorrow on the design of RAVE and how it will work.
If anyone needs help with getting a Gravitator node working, please post and I'm sure between myself and the community we can help get you going.
More info tomorrow on the design of RAVE and how it will work.
If anyone needs help with getting a Gravitator node working, please post and I'm sure between myself and the community we can help get you going.
ok,,can you give a short instruction on how to set a masternode?
thanks.
1. Get a small VPS, compile the daemon and copy it up to the VPS, run it and let it sync.
2. In Graviton wallet, go to the Gravitators tab and click Create.
3. In the alias field put a name to call it, in the address field put the IP address of the VPS and the port. You can use the default port which is 31321, so IP:31321 (e.g. 111.222.333.444:31321).
4. Click OK, then highlight the row and click Get Config.
5. Stop gravitond on VPS. In ~/.graviton/graviton.conf copy and paste the text from Get Config. Also make sure to include staking=0. Replace the spots that say to replcae them, with the right values.
6. Start gravitond on VPS.
7. Send 25000 GRAV to the address generated for the node (highlight the row on My Gravitator Nodes and click Copy Address).
8. Wait for 7 confirms.
9. Select the gravitator on the My Gravitator Nodes tab and click Start.
10. Wait and eventually you will start receiving payments.
wow, thanks very much.
i think missed step 5, will try it again.
May 03, 2015, 10:38:05 PM
We should all make an effort to tweet on Twitter and let @CryptoCurrencyX and @BittrexExchange know that you are interested in being able to trade $GRAV there...
More info tomorrow on the design of RAVE and how it will work.
If anyone needs help with getting a Gravitator node working, please post and I'm sure between myself and the community we can help get you going.
More info tomorrow on the design of RAVE and how it will work.
If anyone needs help with getting a Gravitator node working, please post and I'm sure between myself and the community we can help get you going.
ok,,can you give a short instruction on how to set a masternode?
thanks.
1. Get a small VPS, compile the daemon and copy it up to the VPS, run it and let it sync.
2. In Graviton wallet, go to the Gravitators tab and click Create.
3. In the alias field put a name to call it, in the address field put the IP address of the VPS and the port. You can use the default port which is 31321, so IP:31321 (e.g. 111.222.333.444:31321).
4. Click OK, then highlight the row and click Get Config.
5. Stop gravitond on VPS. In ~/.graviton/graviton.conf copy and paste the text from Get Config. Also make sure to include staking=0. Replace the spots that say to replcae them, with the right values.
6. Start gravitond on VPS.
7. Send 25000 GRAV to the address generated for the node (highlight the row on My Gravitator Nodes and click Copy Address).
8. Wait for 7 confirms.
9. Select the gravitator on the My Gravitator Nodes tab and click Start.
10. Wait and eventually you will start receiving payments.
May 03, 2015, 10:32:24 PM
We should all make an effort to tweet on Twitter and let @CryptoCurrencyX and @BittrexExchange know that you are interested in being able to trade $GRAV there...
More info tomorrow on the design of RAVE and how it will work.
If anyone needs help with getting a Gravitator node working, please post and I'm sure between myself and the community we can help get you going.
More info tomorrow on the design of RAVE and how it will work.
If anyone needs help with getting a Gravitator node working, please post and I'm sure between myself and the community we can help get you going.
ok,,can you give a short instruction on how to set a masternode?
thanks.
May 03, 2015, 10:17:59 PM
We should all make an effort to tweet on Twitter and let @CryptoCurrencyX and @BittrexExchange know that you are interested in being able to trade $GRAV there...
More info tomorrow on the design of RAVE and how it will work.
If anyone needs help with getting a Gravitator node working, please post and I'm sure between myself and the community we can help get you going.
More info tomorrow on the design of RAVE and how it will work.
If anyone needs help with getting a Gravitator node working, please post and I'm sure between myself and the community we can help get you going.
May 03, 2015, 09:13:08 PM
this coin is really nice.
nice coin- buy buy more May 03, 2015, 08:48:22 PM
this coin is really nice.
May 03, 2015, 06:34:52 PM
It says "Network Stake is 460676", what does that mean exactly? I've never staked before?
That is about how many coins are being staked. So your chance of finding a block is: (Number of coins you have)/(stake weight)
May 03, 2015, 08:34:11 PM
good coin, i want it to c-cex- yobit is...
May 03, 2015, 08:23:08 PM
pos is working flawlessly.
May 03, 2015, 07:55:53 PM
I only have 1 connection any nodes to add?
pos blocks getting rejected
pos blocks getting rejected
no orphans here
May 03, 2015, 07:47:38 PM
I only have 1 connection any nodes to add?
pos blocks getting rejected
pos blocks getting rejected
I have 17
Code:
19:46:51

getpeerinfo
19:46:52

[
{
"addr" : "[2001:0:9d38:6ab8:1c2e:16d4:ab05:f0f8]:56999",
"addrlocal" : "[2001:0:9d38:6abd:1cf2:43f:b3ed:16f3]:31321",
"services" : "00000001",
"lastsend" : 1430696779,
"lastrecv" : 1430696779,
"bytessent" : 142578,
"bytesrecv" : 218577,
"conntime" : 1430684085,
"pingtime" : 0.43945400,
"version" : 61400,
"subver" : "/Wormhole:1.2.0/",
"inbound" : true,
"startingheight" : 3860,
"banscore" : 0,
"syncnode" : true
},
{
"addr" : "188.166.90.239:31321",
"addrlocal" : "76.18.233.12:49453",
"services" : "00000001",
"lastsend" : 1430696779,
"lastrecv" : 1430696779,
"bytessent" : 184606,
"bytesrecv" : 209856,
"conntime" : 1430684095,
"pingtime" : 0.17871100,
"version" : 61400,
"subver" : "/Wormhole:1.2.0/",
"inbound" : false,
"startingheight" : 3860,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "[2001:0:5ef5:79fb:2cb5:2964:a449:fff8]:58295",
"addrlocal" : "[2001:0:9d38:6abd:1cf2:43f:b3ed:16f3]:31321",
"services" : "00000001",
"lastsend" : 1430696779,
"lastrecv" : 1430696779,
"bytessent" : 187789,
"bytesrecv" : 149780,
"conntime" : 1430684096,
"pingtime" : 0.17285200,
"version" : 61400,
"subver" : "/Wormhole:1.2.0/",
"inbound" : true,
"startingheight" : 3860,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "108.61.10.90:31321",
"addrlocal" : "76.18.233.12:49460",
"services" : "00000001",
"lastsend" : 1430696799,
"lastrecv" : 1430696799,
"bytessent" : 210440,
"bytesrecv" : 269370,
"conntime" : 1430684099,
"pingtime" : 0.11816500,
"version" : 61400,
"subver" : "/Wormhole:1.2.0/",
"inbound" : false,
"startingheight" : 3860,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "104.238.133.29:31321",
"addrlocal" : "76.18.233.12:49468",
"services" : "00000001",
"lastsend" : 1430696791,
"lastrecv" : 1430696791,
"bytessent" : 104848,
"bytesrecv" : 261099,
"conntime" : 1430684108,
"pingtime" : 0.09961000,
"version" : 61400,
"subver" : "/Wormhole:1.2.0/",
"inbound" : false,
"startingheight" : 3862,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "[2001:0:5ef5:79fb:2020:1a0c:a4cf:c0c4]:61038",
"addrlocal" : "[2001:0:9d38:6abd:1cf2:43f:b3ed:16f3]:31321",
"services" : "00000001",
"lastsend" : 1430696808,
"lastrecv" : 1430696809,
"bytessent" : 177916,
"bytesrecv" : 144469,
"conntime" : 1430684119,
"pingtime" : 0.18945300,
"version" : 61400,
"subver" : "/Wormhole:1.2.0/",
"inbound" : true,
"startingheight" : 3862,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "[2001:0:5ef5:79fd:34c8:4d0:72ff:9829]:61395",
"addrlocal" : "[2001:0:9d38:6abd:1cf2:43f:b3ed:16f3]:31321",
"services" : "00000001",
"lastsend" : 1430696791,
"lastrecv" : 1430696791,
"bytessent" : 166962,
"bytesrecv" : 150331,
"conntime" : 1430684173,
"pingtime" : 0.15918000,
"version" : 61400,
"subver" : "/Wormhole:1.2.0/",
"inbound" : true,
"startingheight" : 3866,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "[2001:0:5ef5:79fd:34ab:2691:9fcb:c525]:52664",
"addrlocal" : "[2001:0:9d38:6abd:1cf2:43f:b3ed:16f3]:31321",
"services" : "00000001",
"lastsend" : 1430696810,
"lastrecv" : 1430696810,
"bytessent" : 201542,
"bytesrecv" : 180653,
"conntime" : 1430684191,
"pingtime" : 0.26953100,
"version" : 61400,
"subver" : "/Wormhole:1.2.0/",
"inbound" : true,
"startingheight" : 3866,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "[2001:0:9d38:90d7:442:a28:b3e5:ad9a]:31321",
"addrlocal" : "[2001:0:9d38:6abd:1cf2:43f:b3ed:16f3]:49535",
"services" : "00000001",
"lastsend" : 1430696779,
"lastrecv" : 1430696768,
"bytessent" : 187735,
"bytesrecv" : 158817,
"conntime" : 1430684217,
"pingtime" : 0.07324200,
"version" : 61400,
"subver" : "/Wormhole:1.2.0/",
"inbound" : false,
"startingheight" : 3866,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "[2001:0:9d38:6abd:c89:1d71:a6a4:25d8]:55536",
"addrlocal" : "[2001:0:9d38:6abd:1cf2:43f:b3ed:16f3]:31321",
"services" : "00000001",
"lastsend" : 1430696808,
"lastrecv" : 1430696809,
"bytessent" : 185795,
"bytesrecv" : 166120,
"conntime" : 1430684251,
"pingtime" : 0.17871100,
"version" : 61400,
"subver" : "/Wormhole:1.2.0/",
"inbound" : true,
"startingheight" : 3866,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "[2001:0:5ef5:79fb:3886:3169:876d:1197]:61696",
"addrlocal" : "[2001:0:9d38:6abd:1cf2:43f:b3ed:16f3]:31321",
"services" : "00000001",
"lastsend" : 1430696779,
"lastrecv" : 1430696779,
"bytessent" : 129393,
"bytesrecv" : 147561,
"conntime" : 1430684383,
"pingtime" : 0.27832100,
"version" : 61400,
"subver" : "/Wormhole:1.2.0/",
"inbound" : true,
"startingheight" : 3868,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "[2001:0:9d38:6ab8:342f:c52:afc6:9571]:51412",
"addrlocal" : "[2001:0:9d38:6abd:1cf2:43f:b3ed:16f3]:31321",
"services" : "00000001",
"lastsend" : 1430696785,
"lastrecv" : 1430696785,
"bytessent" : 155929,
"bytesrecv" : 137084,
"conntime" : 1430684464,
"pingtime" : 0.22363300,
"version" : 61400,
"subver" : "/Wormhole:1.2.0/",
"inbound" : true,
"startingheight" : 3873,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "95.181.73.23:31321",
"addrlocal" : "76.18.233.12:52492",
"services" : "00000001",
"lastsend" : 1430696806,
"lastrecv" : 1430696806,
"bytessent" : 73456,
"bytesrecv" : 78064,
"conntime" : 1430690013,
"pingtime" : 0.28418000,
"version" : 61400,
"subver" : "/Wormhole:1.2.0/",
"inbound" : false,
"startingheight" : 4013,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "[2001:0:5ef5:79fb:4bf:3845:a11d:4419]:62439",
"addrlocal" : "[2001:0:9d38:6abd:1cf2:43f:b3ed:16f3]:31321",
"services" : "00000001",
"lastsend" : 1430696785,
"lastrecv" : 1430696785,
"bytessent" : 83191,
"bytesrecv" : 82801,
"conntime" : 1430690055,
"pingtime" : 0.25292900,
"version" : 61400,
"subver" : "/Wormhole:1.2.0/",
"inbound" : true,
"startingheight" : 4013,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "173.23.75.89:31321",
"addrlocal" : "76.18.233.12:55079",
"services" : "00000001",
"lastsend" : 1430696807,
"lastrecv" : 1430696807,
"bytessent" : 19179,
"bytesrecv" : 15352,
"conntime" : 1430695186,
"pingtime" : 0.17089800,
"version" : 61400,
"subver" : "/Wormhole:1.2.0/",
"inbound" : false,
"startingheight" : 4084,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "[2001:0:9d38:6abd:1866:1fb:b3f9:a82e]:31321",
"addrlocal" : "[2001:0:9d38:6abd:1cf2:43f:b3ed:16f3]:55151",
"services" : "00000001",
"lastsend" : 1430696785,
"lastrecv" : 1430696785,
"bytessent" : 15503,
"bytesrecv" : 17717,
"conntime" : 1430695340,
"pingtime" : 0.44628900,
"version" : 61400,
"subver" : "/Wormhole:1.2.0/",
"inbound" : false,
"startingheight" : 4086,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "[2001:0:9d38:6ab8:1cda:3465:942c:72d3]:31321",
"addrlocal" : "[2001:0:9d38:6abd:1cf2:43f:b3ed:16f3]:55258",
"services" : "00000001",
"lastsend" : 1430696787,
"lastrecv" : 1430696787,
"bytessent" : 12583,
"bytesrecv" : 13095,
"conntime" : 1430695585,
"pingtime" : 0.11035200,
"version" : 61400,
"subver" : "/Wormhole:1.2.0/",
"inbound" : false,
"startingheight" : 4089,
"banscore" : 0,
"syncnode" : false
}
]
May 03, 2015, 07:31:00 PM
I only have 1 connection any nodes to add?
pos blocks getting rejected
pos blocks getting rejected
May 03, 2015, 06:35:37 PM
It says "Network Stake is 460676", what does that mean exactly? I've never staked before?
How much you have the gravs? Does the gravs also matured?
May 03, 2015, 06:14:39 PM
It says "Network Stake is 460676", what does that mean exactly? I've never staked before?
Jump to: