Author

Topic: [ANN][ICN] iCoin - On Swisscex, C-Cex, Bittrex exchange - page 126. (Read 162098 times)

full member
Activity: 154
Merit: 100
This is so incredibly bad.

Dev can't even handle a legitimate release, how do you think he'll handle it if the coin forks or if there's another problem with this garbage coin?

Stop wasting your hashes on this shit.

Agree with the bolded part and hopefully over time our actions will change your mind about iCoin.

We appreciate all feedback no matter how negative.

Thanks
legendary
Activity: 1316
Merit: 1000
I seem to be on the right chain now with 5180 blocks.

But https://www.miningpool.co doesn't seem to be getting squat. Been mining in it and turning up zero. Should've gotten a few blocks by now... Sad

Is there a mining pool that is actually getting some blocks?

At the current difficulty - that iCoin is stuck in currently (until the hard fork fixes this issue at block 5200) - and with the pool hash rate of just under 1MH/s it will take on average around 32 hours for the pool to find a block.

The whole network hash rate is currently just a touch over 20MH/s.

{EDIT} So the hashrate on MiningPool.co is now around 9MH/s so estimated average block time should be 3 Hours 21 Minutes 39.5 Seconds  Smiley

Just got to hang in there and get to 5200!
full member
Activity: 154
Merit: 100
Quote
First off the new changes to the specifications only occur at block 5200 when the hard fork is introduced.

We're currently @ block 5180 with a diff of 25.26114184 so it may take a while to get to 5200.

Hi All,

Unfortunately we are going to have these teething issues until block 5200, after that things will smooth over. We wanted to make sure most people were made aware of this
change before it occurred.

Also 3 of the 5 pools aren't 1.2 ready, but will confirm with the other shift if they were contacted by the other pools. For some reason the pool owners have gone AWOL.

At this time we are also open to new pools mining iCoin and will be making a post for this later and remove any pools that are not 1.2 ready on the pool list at block 5195.

Really apologies for the frustrations some people are experiencing and will assist where we can.
member
Activity: 70
Merit: 10
This is so incredibly bad.

Dev can't even handle a legitimate release, how do you think he'll handle it if the coin forks or if there's another problem with this garbage coin?

Stop wasting your hashes on this shit.
full member
Activity: 154
Merit: 100
Will help this iCoin with my small 20mhs Cheesy, hope this coin will rise again

Lol, I'm assuming you're on ic.mepool.cc? Noticed that the pool hashrate jumped QUITE considerably. My hashrate was about 1/3rd of the pool, now I feel like a little peon  Wink
full member
Activity: 154
Merit: 100
So this is all just incredibly confusing to me, like a foreign language. Anyone willing to take this down to laments terms? I have been pool mining on ic.mepool.cc up until yesterday, because I heard there might be a wallet upgrade I would have to do. Well, I ended up mining about 230 coins, and another 214 are in the pool, but just unconfirmed?

Anyways, I'm sure they'll confirm. It took my first couple hundred like 48 hours to confirm but they eventually got there lol.

So here's where I'm at. I downloaded V1.2 of the wallet around 20 minutes ago, and it still says out of sync but there is no green loading bar seen below like I've seen on other wallets?? Also, it may be worth noting that when I upgraded to V1.2, I saved/extracted it in a completely different folder (actually on a completely different drive) than my original wallet so as not to create confusion between the two. Well, I open up the wallet and it already has my 230 coins in there somehow and shares the exact same wallet address and exact information as my last wallet, but it is indeed V1.2. How can this be if I saved it to a completely different location and didn't overwrite the first one? :/ I didn't think too much of it, just saw the coins were in there so I felt safe deleting my old wallet V1.0.

So now I've successfully uploaded the new wallet but just having problems with it syncing. When I went to the Debug Window, it said it was on block 5180 which I'm pretty sure is correct, right? Any help with this or should I just wait it out and hopefully it will catch up soon? Seems like a bunch of other people are having trouble solo mining, that's not something I wish to do so I don't need any info on that, just syncing my wallet...

Thanks - Ridg
full member
Activity: 196
Merit: 100
Will help this iCoin with my small 20mhs Cheesy, hope this coin will rise again
hero member
Activity: 644
Merit: 500
Bcnex - The Ultimate Blockchain Trading Platform
Nope. Put in the seeds and used v1.2. Deleted the data. Still stuck on the wrong chain.

Downloaded the database, tried again and... It worked. Kinda... Got an out of sync message, but no blockchain downloading... strange...

I'm not sure why downloading the database was necessary, but it was.

Still getting jack on pools though. Guess the solo miners are raping this hard. Sad

Am I the only one that is really wishing for a smooth launch sometime?

No Matey, I also wish for smooth launches. I did find two or 3 in these past 3 weeks when dozens of alt coins were launched but do you think they give a Rats Ass???

Icoin DEV does not piss straight, he just keeps on repeating himself with the same with addnodes robot answer! They screwed this once, they have screwed it twice and if they dare to relaunch again I am betting that will be a completely screw up again  Roll Eyes

Good luck to the persistant though, maybe you can get a lucky and get a block on a completely different blockchain Grin
newbie
Activity: 42
Merit: 0
member
Activity: 72
Merit: 10
Quote
First off the new changes to the specifications only occur at block 5200 when the hard fork is introduced.

We're currently @ block 5180 with a diff of 25.26114184 so it may take a while to get to 5200.
copper member
Activity: 1380
Merit: 504
THINK IT, BUILD IT, PLAY IT! --- XAYA
Nope. Put in the seeds and used v1.2. Deleted the data. Still stuck on the wrong chain.

Downloaded the database, tried again and... It worked. Kinda... Got an out of sync message, but no blockchain downloading... strange...

I'm not sure why downloading the database was necessary, but it was.

Still getting jack on pools though. Guess the solo miners are raping this hard. Sad

Am I the only one that is really wishing for a smooth launch sometime?
copper member
Activity: 1380
Merit: 504
THINK IT, BUILD IT, PLAY IT! --- XAYA
I seem to be on the right chain now with 5180 blocks.

But https://www.miningpool.co doesn't seem to be getting squat. Been mining in it and turning up zero. Should've gotten a few blocks by now... Sad

Is there a mining pool that is actually getting some blocks?
member
Activity: 72
Merit: 10
I have two clients stuck on block 3064..

This worked like a charm,

From Comment Above
Step to get correct blockchain (even if you got stuck at block n or anything, this will fix)

1. Close icoin wallet
1. Delete %appdata%/icoin/* (except wallet.dat and icoin.conf)
2. Download this block chain database https://mega.co.nz/#!VotmFbhZ!TICrbzUlmRivS4EkfSM1vzDidUs5VcCTj7e1dEM2jSI and copy to %appdata%/icoin/
3. Start icoin wallet you will get correct blockchain and peers.


The dev created a fork for this coin when he started this thread and none of you see why.

He says right in there that THE WALLET VERSION CHANGED TO 1.2 AND TO DOWNLOAD THE NEW ONE AT RELEASE. All of your "fixes" are telling people to download and mine on the OLD wallet because people continued to use it.

My wallet is fully synched at 3074 as I write this and is counting blocks as we speak. It's also the wallet that the dev released with this thread.

Everyone that is on block ~5000+ is mining on a beta version of this coin.

Edit: I see also that the dev decided that the old wallet is the "real wallet" despite telling people that it needed to be updated in this announcement thread. What a fucking crock of shit. Get your shit straight if you're going to release a coin. Pathetic.

Don't let this post confuse you - follow steps below with 1.2 wallet as explained by TeamICoiN:

To get on right block chain (current block 5179) please follow these steps:

1. Add node to icoin.conf

Quote
addnode=162.243.22.117
addnode=seed.icoin.pw
addnode=68.0.250.177:9889
addnode=95.21.29.79:9889
addnode=207.138.200.76:9889
addnode=84.98.195.43:9889
addnode=77.172.93.38:9889

2. Delete everything in %appdata%/icoin except wallet.dat and icoin.conf

3. Download this block chain database https://mega.co.nz/#!VotmFbhZ!TICrbzUlmRivS4EkfSM1vzDidUs5VcCTj7e1dEM2jSI and copy to %appdata%/icoin/

4. Start icoin wallet you will get correct blockchain and peers.

Edit: Current block now 5180
member
Activity: 70
Merit: 10
I have two clients stuck on block 3064..

This worked like a charm,

From Comment Above
Step to get correct blockchain (even if you got stuck at block n or anything, this will fix)

1. Close icoin wallet
1. Delete %appdata%/icoin/* (except wallet.dat and icoin.conf)
2. Download this block chain database https://mega.co.nz/#!VotmFbhZ!TICrbzUlmRivS4EkfSM1vzDidUs5VcCTj7e1dEM2jSI and copy to %appdata%/icoin/
3. Start icoin wallet you will get correct blockchain and peers.


The dev created a fork for this coin when he started this thread and none of you see why.

He says right in there that THE WALLET VERSION CHANGED TO 1.2 AND TO DOWNLOAD THE NEW ONE AT RELEASE. All of your "fixes" are telling people to download and mine on the OLD wallet because people continued to use it.

My wallet is fully synched at 3074 as I write this and is counting blocks as we speak. It's also the wallet that the dev released with this thread.

Everyone that is on block ~5000+ is mining on a beta version of this coin.

Edit: I see also that the dev decided that the old wallet is the "real wallet" despite telling people that it needed to be updated in this announcement thread. What a fucking crock of shit. Get your shit straight if you're going to release a coin. Pathetic.

lol - you are incorrect - get your shit straight.  Roll Eyes


I installed and downloaded the wallet as the OP instructed and I am on a "fork"?

I even deleted all of my iCoin appdata folder and redownloaded the entire blockchain and still the same issue.

Explain why I am incorrect.
legendary
Activity: 1316
Merit: 1000
I have two clients stuck on block 3064..

This worked like a charm,

From Comment Above
Step to get correct blockchain (even if you got stuck at block n or anything, this will fix)

1. Close icoin wallet
1. Delete %appdata%/icoin/* (except wallet.dat and icoin.conf)
2. Download this block chain database https://mega.co.nz/#!VotmFbhZ!TICrbzUlmRivS4EkfSM1vzDidUs5VcCTj7e1dEM2jSI and copy to %appdata%/icoin/
3. Start icoin wallet you will get correct blockchain and peers.


The dev created a fork for this coin when he started this thread and none of you see why.

He says right in there that THE WALLET VERSION CHANGED TO 1.2 AND TO DOWNLOAD THE NEW ONE AT RELEASE. All of your "fixes" are telling people to download and mine on the OLD wallet because people continued to use it.

My wallet is fully synched at 3074 as I write this and is counting blocks as we speak. It's also the wallet that the dev released with this thread.

Everyone that is on block ~5000+ is mining on a beta version of this coin.

Edit: I see also that the dev decided that the old wallet is the "real wallet" despite telling people that it needed to be updated in this announcement thread. What a fucking crock of shit. Get your shit straight if you're going to release a coin. Pathetic.

lol - you are incorrect - get your shit straight.  Roll Eyes
member
Activity: 70
Merit: 10
I have two clients stuck on block 3064..

This worked like a charm,

From Comment Above
Step to get correct blockchain (even if you got stuck at block n or anything, this will fix)

1. Close icoin wallet
1. Delete %appdata%/icoin/* (except wallet.dat and icoin.conf)
2. Download this block chain database https://mega.co.nz/#!VotmFbhZ!TICrbzUlmRivS4EkfSM1vzDidUs5VcCTj7e1dEM2jSI and copy to %appdata%/icoin/
3. Start icoin wallet you will get correct blockchain and peers.


The dev created a fork for this coin when he started this thread and none of you see why.

He says right in there that THE WALLET VERSION CHANGED TO 1.2 AND TO DOWNLOAD THE NEW ONE AT RELEASE. All of your "fixes" are telling people to download and mine on the OLD wallet because people continued to use it.

My wallet is fully synched at 3074 as I write this and is counting blocks as we speak. It's also the wallet that the dev released with this thread.

Everyone that is on block ~5000+ is mining on a beta version of this coin.

Edit: I see also that the dev decided that the old wallet is the "real wallet" despite telling people that it needed to be updated in this announcement thread. What a fucking crock of shit. Get your shit straight if you're going to release a coin. Pathetic.
legendary
Activity: 1316
Merit: 1000
To get on right block chain (current block 5179) please follow these steps:

1. Add node to icoin.conf

Quote
addnode=162.243.22.117
addnode=seed.icoin.pw
addnode=68.0.250.177:9889
addnode=95.21.29.79:9889
addnode=207.138.200.76:9889
addnode=84.98.195.43:9889
addnode=77.172.93.38:9889

2. Delete everything in %appdata%/icoin except wallet.dat and icoin.conf

3. Download this block chain database https://mega.co.nz/#!VotmFbhZ!TICrbzUlmRivS4EkfSM1vzDidUs5VcCTj7e1dEM2jSI and copy to %appdata%/icoin/

4. Start icoin wallet you will get correct blockchain and peers.

Thanks - https://www.miningpool.co back on the correct chain now.

 Smiley
member
Activity: 154
Merit: 10
WPP ENERGY - BACKED ASSET GREEN ENERGY TOKEN
I have two clients stuck on block 3064..

This worked like a charm,

From Comment Above
Step to get correct blockchain (even if you got stuck at block n or anything, this will fix)

1. Close icoin wallet
1. Delete %appdata%/icoin/* (except wallet.dat and icoin.conf)
2. Download this block chain database https://mega.co.nz/#!VotmFbhZ!TICrbzUlmRivS4EkfSM1vzDidUs5VcCTj7e1dEM2jSI and copy to %appdata%/icoin/
3. Start icoin wallet you will get correct blockchain and peers.
legendary
Activity: 1316
Merit: 1000
I have two clients stuck on block 3064..
legendary
Activity: 1694
Merit: 1054
Point. Click. Blockchain
Relaunch... maybe third time's a charm...

-tb-
Jump to: