Topic: ⚜️[Ann]⚜️[INFO] Info Coin ♦ Blake2s ♦ POS/POW ♦ Community Focused Crypto ♦ - page 8. (Read 38186 times)

How did u do it? mine is not syncroniseing,how much did u wait?

i need some help,pls.my wallet arent sycroniseing,and i dont know how to add  those nodes...

Do u have any ideea how to syncronize wallet? its still out of date but im minig fo 12 hours now

thnx

Yes, Info coin is still mine-able. I mine it occasionally on https://www.unimining.net


-o stratum+tcp://blake2s.eu1.unimining.net:5767 -u -p c=INFO

Hellow,im new! how about some advices?! is this minable anymore? how much could i mine whit 6000 mh/s? blake2s
10x

If Bittzy say so, JUST DO IT! 

INFO has a strong and growing community and big plans for the future.

INFO is still cheap, so please check us out and make your own decision.

http://www.theinfocoin.com

The network is often subject to massive hash attacks! We have seen over the last year hash in upwards of 4ths on our network and difficulty spikes up to 80k+ Info Coin keeps on going tho sometimes they slow us down for just a few hours! Its ok because Info Coin is fully backed by the power of the CryptoInfo network and CryptoInfo Hash 'N Cash! Hash farm is standing by waiting to pick up those difficulty spikes! So keep throwing your hash at the Info Coin DGW system its gonna win every time! Our network is strong stable and supported by thousands of users all over the world as you can see form the massive list of nodes we have there!

Good coin. I love the community. Nice.

goooood

Did you had a look at the new InfoCoin site? It is amazing!
https://theinfocoin.com/

i hope this nodes usefull for you or my friends who need

addnode=87.143.197.140:53932
addnode=175.144.171.77:64271
addnode=24.21.56.209:58319
addnode=202.29.7.204:26536
addnode=99.99.158.1:52550
addnode=99.99.158.1:65285
addnode=121.83.57.62:50286
addnode=76.21.169.220:50340
addnode=104.223.33.244:58615
addnode=110.163.131.199:49466
addnode=76.97.120.208:54772
addnode=84.209.29.62:59166
addnode=94.25.171.140:33477
addnode=142.44.193.160:47390
addnode=189.6.16.3:31498
addnode=14.1.201.105:12251
addnode=93.84.64.226:53791
addnode=45.4.241.1:53368
addnode=178.87.35.49:41120
addnode=81.23.150.38:22710
addnode=37.119.156.208:64800
addnode=18.217.55.66:50674
addnode=163.131.152.214:2210
addnode=120.188.78.47:5174
addnode=71.87.122.150:51706
addnode=172.115.227.194:51832
addnode=89.64.1.246:9686
addnode=122.169.22.36:52555
addnode=69.130.13.94:56448
addnode=24.190.231.27:50010
addnode=89.64.1.246:9687
addnode=185.140.162.240:53044
addnode=70.189.143.183:49968
addnode=157.100.224.208:1433
addnode=50.111.117.9:31233
addnode=180.248.4.36:60243
addnode=79.111.13.213:53135
addnode=109.239.22.61:62396
addnode=217.232.59.218:49436
addnode=177.98.109.246:49994
addnode=43.245.140.46:50114
addnode=71.59.193.83:63484
addnode=72.23.242.94:62463
addnode=40.129.219.100:61290
addnode=63.131.220.23:51568
addnode=223.206.233.142:54493
addnode=75.85.178.94:55364
addnode=122.169.59.203:49306
addnode=154.16.7.180:42856
addnode=149.56.66.4:42856
addnode=213.239.212.246:42856
addnode=154.16.7.188:57632
addnode=66.70.247.151:38938
addnode=188.40.78.31:55796
addnode=188.165.39.224:38162
addnode=93.115.61.74:42856
addnode=134.255.219.111:57531
addnode=134.255.216.230:62027
addnode=51.15.162.24:36994
addnode=71.12.246.193:58765
addnode=71.12.246.193:54649
addnode=80.220.152.209:45432
addnode=202.222.51.230:50003
addnode=173.249.13.227:47518
addnode=178.202.26.128:52654
addnode=173.249.28.53:47914
addnode=212.97.2.182:14444
addnode=90.126.122.41:58370
addnode=147.135.130.119:51996
addnode=71.12.246.193:55037
addnode=24.21.56.209:52908
addnode=27.131.6.242:58317
addnode=91.64.20.154:64844

usually its put on .conf file or make new file on notes give name info.conf
i use windows 7 32bit i put the file on C:\Users\ariewayq\AppData\Roaming\infoCoin
its usefull for staking weght or dposite/withdraw
thanks my regards

Do all the PoS work?

http://uploads.ru/AWCnL.jpg

Good coin. I love the community. Nice.

what's with the network? why are blocks so slow?

I like INFO because of its vision and plans in the future. Great admins.

1. On my wallet iC9w7iKU1fMF7ie7csL4ExqBYBZAG9aaQx on blockchain i have 15 229.82 INFO. But on my windows wallet it shows 15 257.21 INFO. The difference is about 27 INFO. How can it be so?

I have two wallets working on two different computers and both are synced and working properly. You probably need to either rescan or redownload the blockchain to fix your problem. You should always remember to save your wallet.dat file multiple times before messing with your Info %appdata% files.


These are your INFO command line options

Options:
  -?                     This help message
  -conf=           Specify configuration file (default: infocoin.conf)
  -pid=            Specify pid file (default: infocoind.pid)
 -gen Generate coins (default: 0)
  -datadir=         Specify data directory
  -wallet=          Specify wallet file (within data directory)
  -dbcache=           Set database cache size in megabytes (default: 25)
  -dblogsize=         Set database disk log size in megabytes (default: 100)
  -timeout=           Specify connection timeout in milliseconds (default: 5000)
  -proxy=       Connect through SOCKS5 proxy
  -tor=         Use proxy to reach tor hidden services (default: same as -proxy)
  -dns                   Allow DNS lookups for -addnode, -seednode and -connect
  -port=           Listen for connections on (default: 15714 or testnet: 25714)
  -maxconnections=    Maintain at most connections to peers (default: 125)
  -addnode=          Add a node to connect to and attempt to keep the connection open
  -connect=          Connect only to the specified node(s)
  -seednode=         Connect to a node to retrieve peer addresses, and disconnect
  -externalip=       Specify your own public address
  -onlynet=         Only connect to nodes in network (IPv4, IPv6 or Tor)
  -discover              Discover own IP address (default: 1 when listening and no -externalip)
  -listen                Accept connections from outside (default: 1 if no -proxy or -connect)
  -bind=           Bind to given address. Use [host]:port notation for IPv6
  -dnsseed               Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect)
  -forcednsseed          Always query for peer addresses via DNS lookup (default: 0)
  -synctime              Sync time with other nodes. Disable if time on your system is precise e.g. syncing with NTP (default: 1)
  -banscore=          Threshold for disconnecting misbehaving peers (default: 100)
  -bantime=           Number of seconds to keep misbehaving peers from reconnecting (default: 86400)
  -maxreceivebuffer=  Maximum per-connection receive buffer, *1000 bytes (default: 5000)
  -maxsendbuffer=     Maximum per-connection send buffer, *1000 bytes (default: 1000)
  -paytxfee=        Fee per KB to add to transactions you send
  -mininput=        When creating transactions, ignore inputs with value less than this (default: 0.01)
  -server                Accept command line and JSON-RPC commands
  -testnet               Use the test network
  -debug=      Output debugging information (default: 0, supplying is optional)
If is not supplied, output all debugging information.
can be: addrman, alert, db, lock, rand, rpc, selectcoins, mempool, net, coinage, coinstake, creation, stakemodifier, qt.
  -logtimestamps         Prepend debug output with timestamp
  -shrinkdebugfile       Shrink debug.log file on client startup (default: 1 when no -debug)
  -printtoconsole        Send trace/debug info to console instead of debug.log file
  -regtest               Enter regression test mode, which uses a special chain in which blocks can be solved instantly. This is intended for regression testing tools and app development.
  -rpcuser=        Username for JSON-RPC connections
  -rpcpassword=      Password for JSON-RPC connections
  -rpcport=        Listen for JSON-RPC connections on (default: 15715 or testnet: 25715)
  -rpcallowip=       Allow JSON-RPC connections from specified IP address
  -rpcthreads=        Set the number of threads to service RPC calls (default: 4)
  -blocknotify=     Execute command when the best block changes (%s in cmd is replaced by block hash)
  -walletnotify=    Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)
  -confchange            Require a confirmations for change (default: 0)
  -upgradewallet         Upgrade wallet to latest format
  -keypool=           Set key pool size to (default: 100)
 -rescan                Rescan the block chain for missing wallet transactions
  -salvagewallet         Attempt to recover private keys from a corrupt wallet.dat
  -checkblocks=       How many blocks to check at startup (default: 500, 0 = all)
  -checklevel=        How thorough the block verification is (0-6, default: 1)
  -loadblock=      Imports blocks from external blk000?.dat file
  -maxorphanblocksmib= Keep at most MiB of unconnectable blocks in memory (default: 40)

Block creation options:
  -blockminsize=      Set minimum block size in bytes (default: 0)
  -blockmaxsize=      Set maximum block size in bytes (default: 250000)
  -blockprioritysize= Set maximum size of high-priority/low-fee transactions in bytes (default: 27000)

SSL options: (see the Infocoin Wiki for SSL setup instructions)
  -rpcssl                                  Use OpenSSL (https) for JSON-RPC connections
  -rpcsslcertificatechainfile=  Server certificate file (default: server.cert)
  -rpcsslprivatekeyfile=         Server private key (default: server.pem)
  -rpcsslciphers=                 Acceptable ciphers (default: TLSv1.2+HIGH:TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!3DES:@STRENGTH)

UI options:
  -lang=           Set language, for example "de_DE" (default: system locale)
  -min                   Start minimized
  -splash                Show splash screen on startup (default: 1)


2. On my wallet iC9w7iKU1fMF7ie7csL4ExqBYBZAG9aaQx on blockchain i have 15 229.82 INFO. But on my windows wallet it shows 15 257.21 INFO. The difference is about 27 INFO. How can it be so?

Getting staking rewards can be difficult at times with info and a wallet rescan might help. I am not completely sure.


3.  How is swap of INFO to INFOX going to work? The ratio is 100 INFO for 1 INFOX? Or will it be a fork?

INFOX will be a treat for those holding INFO... there will be no soft fork, hard fork or spork.

or

If you are holding INFO you will get FREE INFOX.


 

Hello. I have some questions. Could anybody help me?
1. On my wallet iC9w7iKU1fMF7ie7csL4ExqBYBZAG9aaQx on blockchain i have 15 229.82 INFO. But on my windows wallet it shows 15 257.21 INFO. The difference is about 27 INFO. How can it be so?
I think it is in this hash ddf0ca7925242b2c8cd23769dfb986817303d5c93a940bb21df187f828253b09. It shows that I sent 10 INFO, but 27 INFO is a fee?
2. My wallet is up for about 2 days but I haven't received any stacking rewards. How can i get some? The windows wallet says "Expected time to earn reward is 36 seconds".
3. How is swap of INFO to INFOX going to work? The ratio is 100 INFO for 1 INFOX? Or will it be a fork?