[ANN][LimecoinX Rebrand to BitSend] - page 29.

Limx Dev

copper member

Activity: 2352

Merit: 1348

Quote from: Orestes on July 17, 2015, 01:14:10 PM

Quote from: drays on July 12, 2015, 06:14:21 PM

Quote from: Orestes on July 12, 2015, 05:48:33 PM

Quote from: BanzaiBTC on July 12, 2015, 06:10:39 AM

I think he means,

Why does LimX only work with 1 portnr, when coins like crave etc dont have a " fixed" port for the masternodes Wink

Yes that would solve my problem I think. But if there is a reason for havind a fixed port... can i circumvent this loop?

or

How can i run multiple LIMX nodes on a single windows system?

Ehm... I would really prefer to avoid anyone to run many masternodes... Just because I like the current payouts Grin

But I have really enjoyed reading your posts in 8BIT thread (clever and educated people are a kind of rarity here Undecided

), so here is a hint:

my masternodes are actually working on different ports on the server (according to what I wrote in limecoinx.conf). But I have started them remotely on a machine where 8886 written in the limecoinx.conf. Not sure if that is intended use, but it works Wink

Hope it helps. Let me know if it doesn't.

Don't run too many MN's please Grin

.

Thank you for the kind words.
I think i get how to setup the local machine, including the multiwallet. Im at a loss however on the remote machine.

But what i seem to read everywhere is a 1 vps = 1 node setup, which to me seems more than expensive once nodecount picks up.

Looking at this thread i read instances where multiple nodes are run from a single adres:port(multiwallet my guess). So my question would be, is it only possible to run single nodes on single VPS's? Or can multiple nodes be installed on a single server without having to resort to VM?

ps:LIMX Dev - Sourcefoge.net seems to be down making the limx-project inaccessible.

Thank you for your support!

Orestes

sr. member

Activity: 441

Merit: 251

Quote from: drays on July 12, 2015, 06:14:21 PM

Quote from: Orestes on July 12, 2015, 05:48:33 PM

Quote from: BanzaiBTC on July 12, 2015, 06:10:39 AM

I think he means,

Why does LimX only work with 1 portnr, when coins like crave etc dont have a " fixed" port for the masternodes Wink

Yes that would solve my problem I think. But if there is a reason for havind a fixed port... can i circumvent this loop?

or

How can i run multiple LIMX nodes on a single windows system?

Ehm... I would really prefer to avoid anyone to run many masternodes... Just because I like the current payouts Grin

But I have really enjoyed reading your posts in 8BIT thread (clever and educated people are a kind of rarity here Undecided

), so here is a hint:

my masternodes are actually working on different ports on the server (according to what I wrote in limecoinx.conf). But I have started them remotely on a machine where 8886 written in the limecoinx.conf. Not sure if that is intended use, but it works Wink

Hope it helps. Let me know if it doesn't.

Don't run too many MN's please Grin

.

Thank you for the kind words.
I think i get how to setup the local machine, including the multiwallet. Im at a loss however on the remote machine.

But what i seem to read everywhere is a 1 vps = 1 node setup, which to me seems more than expensive once nodecount picks up.

Looking at this thread i read instances where multiple nodes are run from a single adres:port(multiwallet my guess). So my question would be, is it only possible to run single nodes on single VPS's? Or can multiple nodes be installed on a single server without having to resort to VM?

ps:LIMX Dev - Sourcefoge.net seems to be down making the limx-project inaccessible.

Limx Dev

copper member

Activity: 2352

Merit: 1348

Quote from: crackfoo on July 17, 2015, 08:20:43 AM

I've added LIMX back to www.xpool.ca and its now mining and finding blocks properly.

http://www.xpool.ca/blocks/LIMX

Cheers!

Great Thank you ;-)

crackfoo

legendary

Activity: 3570

Merit: 1126

I've added LIMX back to www.xpool.ca and its now mining and finding blocks properly.

http://www.xpool.ca/blocks/LIMX

Cheers!

wildduck

legendary

Activity: 966

Merit: 1001

I love this coin and buying more whenever price drops below 400.

BanzaiBTC

legendary

Activity: 1526

Merit: 1002

Chipcoin Developer

Quote from: dcct on July 16, 2015, 06:46:31 AM

Quote from: BanzaiBTC on July 16, 2015, 06:43:01 AM

did the amount of masternodes just double in the last 48 hrs or so? Embarrassed

(added 22 yesterday)

You little #%&#$& Grin

No just kidding... but man.. 22? Shocked

How much masternodepayment do you recieve per day now? Cry

Dimitry

hero member

Activity: 896

Merit: 501

I like a 10 year vision makes me hungry for more limx:-)) nomnomnom

pineapples

legendary

Activity: 1204

Merit: 1000

to your stations, man the pineapples!!!

Quote from: Limx Dev on July 16, 2015, 06:32:38 AM

Quote from: dcct on July 16, 2015, 05:22:25 AM

Quote from: pineapples on July 15, 2015, 09:56:17 PM

doesnt help the explorer is lagging by a couple of days

https://bchain.info/LIMX/

This one?

http://www.multifaucet.tk/index.php?blockexplorer=LIMX
Sehe keine Probleme ?

lol i only ever tried https://blockexperts.com/limx

dcct

sr. member

Activity: 280

Merit: 250

Quote from: BanzaiBTC on July 16, 2015, 06:43:01 AM

did the amount of masternodes just double in the last 48 hrs or so? Embarrassed

(added 22 yesterday)

BanzaiBTC

legendary

Activity: 1526

Merit: 1002

Chipcoin Developer

did the amount of masternodes just double in the last 48 hrs or so? Embarrassed

Please be so kind to shutdown your masternode so BanzaiBTC can harvest some more masternode payments on a regular basis Grin

Limx Dev

copper member

Activity: 2352

Merit: 1348

Quote from: dcct on July 16, 2015, 05:22:25 AM

Quote from: pineapples on July 15, 2015, 09:56:17 PM

doesnt help the explorer is lagging by a couple of days

https://bchain.info/LIMX/

This one?

http://www.multifaucet.tk/index.php?blockexplorer=LIMX
Sehe keine Probleme ?

dcct

sr. member

Activity: 280

Merit: 250

Quote from: pineapples on July 15, 2015, 09:56:17 PM

doesnt help the explorer is lagging by a couple of days

https://bchain.info/LIMX/

This one?

Limx Dev

copper member

Activity: 2352

Merit: 1348

Quote from: wildduck on July 16, 2015, 01:13:07 AM

Limx 10 years project, good dev always around.

Thanks ... BTC Today 7 Years

Limx Dev

copper member

Activity: 2352

Merit: 1348

Quote from: pineapples on July 15, 2015, 09:56:17 PM

Quote from: Limx Dev on July 15, 2015, 12:58:49 AM

Quote from: pineapples on July 14, 2015, 10:17:40 PM

Quote from: Limx Dev on July 14, 2015, 03:13:36 PM

Quote from: pineapples on July 14, 2015, 08:58:28 AM

Quote from: fenix79 on May 14, 2015, 06:29:42 AM

Alias MN guide
LOCAL WALLET
1. create a file masternode.conf
~/.limecoinx/masternode.conf
2. masternode.conf format
ALIAS_NAME IP_MASTERNODE::8886 MASTERNODE_PRIVKEY TRANSACTIONHASH INDEX_NUMBER(0 or 1 - 5000 limx transaction)

example:
MN1 8.8.8.8:8886 MASTERNODE_PRIVKEY dffd1b04eaa08d355243209f29646078302f6abe037c5a3391b3d31c60b51a3b 0
MN2 8.8.8.4:8886 MASTERNODE_PRIVKEY dffd1b04eaa08d355243209f29646078302f8abe037c5a3391b3d34c60b51a3b 0

3. starting your MN
./limecoinxd masternode start-many
or
./limecoinxd masternode start-alias ALIAS_NAME

i'm having trouble with start-many . i keep receiving a "could not allocate vin"

i followed https://dashtalk.org/threads/reubens-start-multiple-masternodes-from-one-wallet-guide-start-many.4034/

.
i created an empty wallet.
imported two privkeys
did a > masternode genkey
also > masternode outputs (two of them were output)

placed output in masternode.conf

master1 1.2.3.4:8886 genkey txHash1 index
master2 1.2.3.4:8886 samegenkey txHash2 index

limecoinx.conf has contents as suggested by reubens walk though

Code:

rpcuser=SomeRandomString
rpcpassword=EvenLongerRandomString
rpcallowip=127.0.0.1
listen=0
server=1
daemon=1
logtimestamps=1

any suggestions ??

if(!GetMasterNodeVin(vin, pubKeyCollateralAddress, keyCollateralAddress, txHash, strOutputIndex)) {
errorMessage = "could not allocate vin";
LogPrintf("CActiveMasternode::Register() - Error: %s\n", errorMessage.c_str());
return false;
}

Something is missing ??

lol but what ? and how ?

as far as i can tell i have put correct and appropriate data in masternode.conf

"i created an empty wallet. ??"

Use two empty wallet.

two empty wallets ? what do you mean ?

i have tried using two seperate addresses for the two tx. and i also have tried using a single address with two tx.

,
later i will try a brand new empty wallet with two seperate new addresses.

...
doesnt help the explorer is lagging by a couple of days

https://dashtalk.org/threads/reubens-start-multiple-masternodes-from-one-wallet-guide-start-many.4034/

a. New wallet setup
Create a new address for each Masternode and encrypt the wallet. You do this by opening terminal and following the following instructions.
You need separate Wallets?

wildduck

legendary

Activity: 966

Merit: 1001

Limx 10 years project, good dev always around.

pineapples

legendary

Activity: 1204

Merit: 1000

to your stations, man the pineapples!!!

Quote from: Limx Dev on July 15, 2015, 12:58:49 AM

Quote from: pineapples on July 14, 2015, 10:17:40 PM

Quote from: Limx Dev on July 14, 2015, 03:13:36 PM

Quote from: pineapples on July 14, 2015, 08:58:28 AM

Quote from: fenix79 on May 14, 2015, 06:29:42 AM

Alias MN guide
LOCAL WALLET
1. create a file masternode.conf
~/.limecoinx/masternode.conf
2. masternode.conf format
ALIAS_NAME IP_MASTERNODE::8886 MASTERNODE_PRIVKEY TRANSACTIONHASH INDEX_NUMBER(0 or 1 - 5000 limx transaction)

example:
MN1 8.8.8.8:8886 MASTERNODE_PRIVKEY dffd1b04eaa08d355243209f29646078302f6abe037c5a3391b3d31c60b51a3b 0
MN2 8.8.8.4:8886 MASTERNODE_PRIVKEY dffd1b04eaa08d355243209f29646078302f8abe037c5a3391b3d34c60b51a3b 0

3. starting your MN
./limecoinxd masternode start-many
or
./limecoinxd masternode start-alias ALIAS_NAME

i'm having trouble with start-many . i keep receiving a "could not allocate vin"

i followed https://dashtalk.org/threads/reubens-start-multiple-masternodes-from-one-wallet-guide-start-many.4034/

.
i created an empty wallet.
imported two privkeys
did a > masternode genkey
also > masternode outputs (two of them were output)

placed output in masternode.conf

master1 1.2.3.4:8886 genkey txHash1 index
master2 1.2.3.4:8886 samegenkey txHash2 index

limecoinx.conf has contents as suggested by reubens walk though

Code:

rpcuser=SomeRandomString
rpcpassword=EvenLongerRandomString
rpcallowip=127.0.0.1
listen=0
server=1
daemon=1
logtimestamps=1

any suggestions ??

if(!GetMasterNodeVin(vin, pubKeyCollateralAddress, keyCollateralAddress, txHash, strOutputIndex)) {
errorMessage = "could not allocate vin";
LogPrintf("CActiveMasternode::Register() - Error: %s\n", errorMessage.c_str());
return false;
}

Something is missing ??

lol but what ? and how ?

as far as i can tell i have put correct and appropriate data in masternode.conf

"i created an empty wallet. ??"

Use two empty wallet.

two empty wallets ? what do you mean ?

i have tried using two seperate addresses for the two tx. and i also have tried using a single address with two tx.

,
later i will try a brand new empty wallet with two seperate new addresses.

...
doesnt help the explorer is lagging by a couple of days

Limx Dev

copper member

Activity: 2352

Merit: 1348

Quote from: LucD88 on July 15, 2015, 10:42:54 AM

I've been following LIMX for several weeks now. What exactly is being developed here? The price randomly jumps up and down every now and then while the volume is very low.

Is there any roadmap available or perhaps some future plans the developers can share with us? What are the goals of this coin?

LimecoinX was Core 9 and X11 algo. Today - Core 10, Instantx, Masternodes, Paperwallet and Darksend. We have a good foundation.
You want a roadmap and others promise? This will not happen. Limecoinx is for me a 10 years project. Important now is a good distribution/marketing.

Limecoinx ist kein Pumpcoin und wir werden auch keine Sinnlosen Roadmaps etc machen. Viel mehr wollen wir ein langfristigen Support anbieten. Natürlich werden wir auch
alles daran setzten LimecoinX technologisch weiter zu entwickeln. Jedoch ist das nicht das wichtigste für einen Coin. Sondern die Langfristige Perspektive sowie faire und gerechte Verteilung!

This is our value:

Code:

"jawitech","miningspree","najzenmajsen","mikerbiker6"
"Odd Thomas","newcripto","anotherlateminer","q327K091","Hamuki"
"Bobsurplus","JUmpy14","drays","LIMX SUPPORT","Erkallys"
"IParn","mdtspain","TrackCoin","proletariat","BanzaiBTC"
"Velgelm","Real14Hero","john_doe","NoobKidOnTheBlock","jc12345"
"fenix79","cryptocrap","lentzaj","magaura","jelt14","AdamWhite"
"johnywalker","TripleHeXXX","crypspert","LucD88","crackfoo"
"shotgun1969","cryptodev35","M4ketech","minerpools","pineapples"
"LucD88","pineapples","Dimitry","pol5","capslock42","mucalov91"
"cvasy","orenz","blackmasker","vitha putri"
"ukon","bms2013","BanzaiBTC", "altcoin.center","dcct"
"AikaPool","th3.r00t","BITDV","rapta","richiela","Cryptopia Exchange"


...old thread.
"sylwt","lefichop","zxm7001","vindyne8",
"platorin","foxy","Fercho","Jmtyra",
"Rehael","s1ng","czvezda","altcoinherald","asaghost"
"esotericizm","BitCoinDream","CryptoLaunch","louiseth1"
"dimez","tricass","spicelord","USCMC2001"
"AlfaONE","sebastiebass","elviselvis101","cinderpelt","ortchi"

"MinermanNC","Matni","dstorm","neleonele","Blas"
"rubberpool","bitluryz","Poolest"
"Hamsterer","lucienlu","bluez69","Oldriga","bitluryz"
"Nthused","TheCoinFinder","CZSpitfire","USCMC2001","xBK201"
"djaliel","OmarGsPools","q327K091","scott0577","chiguireitor"
"UGETHIT"

LucD88

hero member

Activity: 525

Merit: 510

I've been following LIMX for several weeks now. What exactly is being developed here? The price randomly jumps up and down every now and then while the volume is very low.

Is there any roadmap available or perhaps some future plans the developers can share with us? What are the goals of this coin?

Dimitry

hero member

Activity: 896

Merit: 501

Quote from: Limx Dev on July 13, 2015, 03:28:02 PM

Quote from: anotherlateminer on July 13, 2015, 02:42:13 PM

What will be the next improvements for the coin?

Technically I have ideas.More important is rather the marketing and community building.

well maybe those have to be build on something technically? :-)) something people look out for

Limx Dev

copper member

Activity: 2352

Merit: 1348

Quote from: pineapples on July 14, 2015, 10:17:40 PM

Quote from: Limx Dev on July 14, 2015, 03:13:36 PM

Quote from: pineapples on July 14, 2015, 08:58:28 AM

Quote from: fenix79 on May 14, 2015, 06:29:42 AM

Alias MN guide
LOCAL WALLET
1. create a file masternode.conf
~/.limecoinx/masternode.conf
2. masternode.conf format
ALIAS_NAME IP_MASTERNODE::8886 MASTERNODE_PRIVKEY TRANSACTIONHASH INDEX_NUMBER(0 or 1 - 5000 limx transaction)

example:
MN1 8.8.8.8:8886 MASTERNODE_PRIVKEY dffd1b04eaa08d355243209f29646078302f6abe037c5a3391b3d31c60b51a3b 0
MN2 8.8.8.4:8886 MASTERNODE_PRIVKEY dffd1b04eaa08d355243209f29646078302f8abe037c5a3391b3d34c60b51a3b 0

3. starting your MN
./limecoinxd masternode start-many
or
./limecoinxd masternode start-alias ALIAS_NAME

i'm having trouble with start-many . i keep receiving a "could not allocate vin"

i followed https://dashtalk.org/threads/reubens-start-multiple-masternodes-from-one-wallet-guide-start-many.4034/

.
i created an empty wallet.
imported two privkeys
did a > masternode genkey
also > masternode outputs (two of them were output)

placed output in masternode.conf

master1 1.2.3.4:8886 genkey txHash1 index
master2 1.2.3.4:8886 samegenkey txHash2 index

limecoinx.conf has contents as suggested by reubens walk though

Code:

rpcuser=SomeRandomString
rpcpassword=EvenLongerRandomString
rpcallowip=127.0.0.1
listen=0
server=1
daemon=1
logtimestamps=1

any suggestions ??

if(!GetMasterNodeVin(vin, pubKeyCollateralAddress, keyCollateralAddress, txHash, strOutputIndex)) {
   errorMessage = "could not allocate vin";
   LogPrintf("CActiveMasternode::Register() - Error: %s\n", errorMessage.c_str());
   return false;
   }

Something is missing ??

lol but what ? and how ?

as far as i can tell i have put correct and appropriate data in masternode.conf

"i created an empty wallet. ??"

Use two empty wallet.

Topic: [ANN][LimecoinX Rebrand to BitSend] - page 29. (Read 110702 times)