Topic: [ANN][MAG] MAGNET - GOES STELLAR - More in description / magnetwork.io - page 32. (Read 83023 times)
May 14, 2018, 03:30:40 PM
All alts are bleeding a bit. But still... any news? I think will see the price going up after the marketing campaign (and the product release ofc)
May 10, 2018, 10:26:16 AM
I just set up a Masternode.
I wanted to ask you how I can check that it's running properly?
magnetd masternode status returns:
{
"vin" : "CTxIn(COutPoint(0000000000, 4294967295), coinbase )",
"service" : "[::]:0",
"status" : 0,
"pubKeyMasternode" : "MogtB1E4trRLpKBQ41yHAZVuU4eEBPbjL3",
"notCapableReason" : ""
}
Does "status" : 0 mean it works? Are there any other handy command I can use to monitor if everything OK? And do I need to keep wallet on windows PC running all the time?
Sorry for these nubby questions, but this is my first masternode.
I wanted to ask you how I can check that it's running properly?
magnetd masternode status returns:
{
"vin" : "CTxIn(COutPoint(0000000000, 4294967295), coinbase )",
"service" : "[::]:0",
"status" : 0,
"pubKeyMasternode" : "MogtB1E4trRLpKBQ41yHAZVuU4eEBPbjL3",
"notCapableReason" : ""
}
Does "status" : 0 mean it works? Are there any other handy command I can use to monitor if everything OK? And do I need to keep wallet on windows PC running all the time?
Sorry for these nubby questions, but this is my first masternode.
check your config :
externalip=EXTERNAL_IP without port
masternode=1
masternodeprivkey=MASTERNODE_PRIVATE_KEY
May 09, 2018, 10:58:31 AM
I just set up a Masternode.
I wanted to ask you how I can check that it's running properly?
magnetd masternode status returns:
{
"vin" : "CTxIn(COutPoint(0000000000, 4294967295), coinbase )",
"service" : "[::]:0",
"status" : 0,
"pubKeyMasternode" : "MogtB1E4trRLpKBQ41yHAZVuU4eEBPbjL3",
"notCapableReason" : ""
}
Does "status" : 0 mean it works? Are there any other handy command I can use to monitor if everything OK? And do I need to keep wallet on windows PC running all the time?
Sorry for these nubby questions, but this is my first masternode.
I wanted to ask you how I can check that it's running properly?
magnetd masternode status returns:
{
"vin" : "CTxIn(COutPoint(0000000000, 4294967295), coinbase )",
"service" : "[::]:0",
"status" : 0,
"pubKeyMasternode" : "MogtB1E4trRLpKBQ41yHAZVuU4eEBPbjL3",
"notCapableReason" : ""
}
Does "status" : 0 mean it works? Are there any other handy command I can use to monitor if everything OK? And do I need to keep wallet on windows PC running all the time?
Sorry for these nubby questions, but this is my first masternode.
I think as long as you can find your MN in http://magnetwork.io/checkmn/ than its OK
May 08, 2018, 03:13:16 PM
I just set up a Masternode.
I wanted to ask you how I can check that it's running properly?
magnetd masternode status returns:
{
"vin" : "CTxIn(COutPoint(0000000000, 4294967295), coinbase )",
"service" : "[::]:0",
"status" : 0,
"pubKeyMasternode" : "MogtB1E4trRLpKBQ41yHAZVuU4eEBPbjL3",
"notCapableReason" : ""
}
Does "status" : 0 mean it works? Are there any other handy command I can use to monitor if everything OK? And do I need to keep wallet on windows PC running all the time?
Sorry for these nubby questions, but this is my first masternode.
I wanted to ask you how I can check that it's running properly?
magnetd masternode status returns:
{
"vin" : "CTxIn(COutPoint(0000000000, 4294967295), coinbase )",
"service" : "[::]:0",
"status" : 0,
"pubKeyMasternode" : "MogtB1E4trRLpKBQ41yHAZVuU4eEBPbjL3",
"notCapableReason" : ""
}
Does "status" : 0 mean it works? Are there any other handy command I can use to monitor if everything OK? And do I need to keep wallet on windows PC running all the time?
Sorry for these nubby questions, but this is my first masternode.
May 07, 2018, 06:55:18 AM
sad, price is sooo low =/ any news ? marketing ?
People in their Discord channel is also talking about the price being too low and about any marketing strategy to push it up but the Dev has different take on it. He told in the chat that marketing is always in their plan but he is planning first to finish the merchant tool. He wanted to have a working product first before making any move in the marketing area. And, that I think is a very good plan. We don't want to market MAG with a half-baked tool because that will just lower the price even more.
I understand that and admire it. However in the crypto world the price is more related to promises (white paper and marketing) then anything else
. I have been holder and support of MAG since very beginning but feel like that consistently depressed price may make investor to look somewhere else. On the other hand as long as devs are around and steady community believing in project then MAG's valuation will increase over the time. Thinking from the positive side, its time to buy more MAG before the plane take off.
The old holder got depress but the new comer get a great price.
May 06, 2018, 08:27:25 PM
sad, price is sooo low =/ any news ? marketing ?
People in their Discord channel is also talking about the price being too low and about any marketing strategy to push it up but the Dev has different take on it. He told in the chat that marketing is always in their plan but he is planning first to finish the merchant tool. He wanted to have a working product first before making any move in the marketing area. And, that I think is a very good plan. We don't want to market MAG with a half-baked tool because that will just lower the price even more.
I understand that and admire it. However in the crypto world the price is more related to promises (white paper and marketing) then anything else
. I have been holder and support of MAG since very beginning but feel like that consistently depressed price may make investor to look somewhere else. On the other hand as long as devs are around and steady community believing in project then MAG's valuation will increase over the time. May 06, 2018, 05:19:17 PM
sad, price is sooo low =/ any news ? marketing ?
People in their Discord channel is also talking about the price being too low and about any marketing strategy to push it up but the Dev has different take on it. He told in the chat that marketing is always in their plan but he is planning first to finish the merchant tool. He wanted to have a working product first before making any move in the marketing area. And, that I think is a very good plan. We don't want to market MAG with a half-baked tool because that will just lower the price even more.
May 06, 2018, 04:19:40 PM
sad, price is sooo low =/ any news ? marketing ?
May 06, 2018, 02:39:29 AM
New Wallet Update Ver. 1.4.3
https://github.com/magnetwork/magnet/releases
* Improved initial connectivity (default seeds).
* Cosmetic update for icons.
File > SHA256
bootstrap.zip > 946B0CC6795934719FA72CA656F3CE0274E195769327BD9D28B2C06C8B898A87
magnet-qt-WIN.zip > 78D7C45C53D5437BF787D793F8B6B532223BD67515B06B7C0893AFEA9535251C
magnet-qt-LINUX.tar.gz > 10FCF472E58ED378B3B1794D01F77427EEDC894AA605A119675433112B682BF0
Magnet-Qt.pkg > E70871736795EBC9FDCF2E0BAABC47429E39C60CB52683E081A16C4A0667CB26
https://github.com/magnetwork/magnet/releases
* Improved initial connectivity (default seeds).
* Cosmetic update for icons.
File > SHA256
bootstrap.zip > 946B0CC6795934719FA72CA656F3CE0274E195769327BD9D28B2C06C8B898A87
magnet-qt-WIN.zip > 78D7C45C53D5437BF787D793F8B6B532223BD67515B06B7C0893AFEA9535251C
magnet-qt-LINUX.tar.gz > 10FCF472E58ED378B3B1794D01F77427EEDC894AA605A119675433112B682BF0
Magnet-Qt.pkg > E70871736795EBC9FDCF2E0BAABC47429E39C60CB52683E081A16C4A0667CB26
May 04, 2018, 12:53:28 PM
new coin with MN! Start tomorrow. Developer with a reputation. Excellent budget for development, fast listing, adequate marketing. Signature company already in force, already has an advertising banner on masternodes.online. link in my signature, details in the discord ZIXX COIN.
May 01, 2018, 03:11:20 PM
hello everyone, i need help my wallet does not syncronize the bar stays blocking (this is the first one) and i can not open the magnet.conf (i'm on mac)
Hi my friend,
Thanks for the post.
First make sure you have Magnet version 1.4.2, open the counsel and type
Code:
getinfo
Please try steps from iDev posted a few posts above you (April 30, 2018, 02:21:51 PM).
He provides steps to remove files to allow a full sync.
April 30, 2018, 05:53:53 PM
hello everyone, i need help my wallet does not syncronize the bar stays blocking (this is the first one) and i can not open the magnet.conf (i'm on mac)
April 30, 2018, 05:12:06 PM
---Everyone We now support MAG - Just to FYI - We have 4 locations worldwide - East & West USA, UK (London) and EU (Germany) and APAC (Singapore)
www.QuantumMiningPool.com
Discord Link - https://discord.gg/dWNJEpx
Mine here for more - Over 225+ coins...
www.QuantumMiningPool.com
Discord Link - https://discord.gg/dWNJEpx
Mine here for more - Over 225+ coins...
April 30, 2018, 01:40:02 PM
Great announcement! Especially now that the price of MAG is tanking hard, this announcement could help it to increase a little bit. Registered a dummy merchant account just to see if it works and it went through without any problem. What we need right now is to announce it in every social media to reach many merchant and have them setup their accounts in the website.
April 27, 2018, 03:04:40 PM
My wallet balance is significantly less than what I can see on block explorer. Wallet shows a total of only 2865.95892145 MAG but on explorer the balance is 4134.67052232 MAG. I couldn't find differences in transactions. Can someone help me please? My adress is MueAeP9aV2XTaY5LvyMReCCbZWbzj2hWkH and wallet is fully synced
Magnet explorer have some issue at least the first version
Try this one balance is more accurate http://explorer2.magnetwork.io/
That's the one I used. Anyway, the wallet have updated and now shows the same balance as shown on explorer. I think it was a glitch as all the latest transactions were visible in wallet even before it updated to current balance. Took it about 2 hours though
I am having the same issue. My balance is significantly less than what the block explorer shows. I have waited more than 4 hours. I do see all the transactions though so hopefully final balance will get updated soon.
Ok so my balance hasn't been updated yet after more than 24 hours. I did delete all the files except wallet.dat and mag config. The wallet has synced and staking as well. Any other ideas?
Hello, I have the same problem. Please, tell me, how did you fix your wallet problem? Thx
So I didn't do anything except removed all files from magnet folder except wallet.dat and magnet config. I launched the wallet again and let it sync. I got busy for a day at work and after awhile when I checked it was properly synced and my wallet was showing the balance that is on the explorer. I think it was a gap of around 36 hours when I launched the wallet and finally checked.
April 26, 2018, 08:44:08 PM
My wallet balance is significantly less than what I can see on block explorer. Wallet shows a total of only 2865.95892145 MAG but on explorer the balance is 4134.67052232 MAG. I couldn't find differences in transactions. Can someone help me please? My adress is MueAeP9aV2XTaY5LvyMReCCbZWbzj2hWkH and wallet is fully synced
Magnet explorer have some issue at least the first version
Try this one balance is more accurate http://explorer2.magnetwork.io/
That's the one I used. Anyway, the wallet have updated and now shows the same balance as shown on explorer. I think it was a glitch as all the latest transactions were visible in wallet even before it updated to current balance. Took it about 2 hours though
I am having the same issue. My balance is significantly less than what the block explorer shows. I have waited more than 4 hours. I do see all the transactions though so hopefully final balance will get updated soon.
Ok so my balance hasn't been updated yet after more than 24 hours. I did delete all the files except wallet.dat and mag config. The wallet has synced and staking as well. Any other ideas?
Hello, I have the same problem. Please, tell me, how did you fix your wallet problem? Thx
Before we rat hole, either in the VPS ( cd magnet -> ./magnetd getinfo ) or in the windows client ( getinfo through the console )
Double check your block height is the same as here: http://explorer.magnetwork.io/
If so, likely something unique going on. The easiest solution I've found is dump the private key in the old VPS, import into a new VPS
That order is, all in VPS:
[In old VPS]
cd magnet
./magnetd listreceivedbyaddress 0 true
[You identify address holding the keys, save that on scratch paper]
Command to export your private key: ./magnetd dumpprivkey YourBitCoinPublicAddress
Command to import your private key: ./magnetd importprivkey YourBitCoinPrivateKey
and you rescued your coins
Had to Vultr VPS spike at 100% CPU running up the bill because I left them on 1.4.1 and it was stuck at some block.
Rescued 4 of four MNs. Hell of a week though, so hope my lessons serve someone well.
Good luck! Post back if it doesn't work. Smart people and a solid dev (@Roland, @Magnet) team in here.
April 26, 2018, 09:38:09 AM
My wallet balance is significantly less than what I can see on block explorer. Wallet shows a total of only 2865.95892145 MAG but on explorer the balance is 4134.67052232 MAG. I couldn't find differences in transactions. Can someone help me please? My adress is MueAeP9aV2XTaY5LvyMReCCbZWbzj2hWkH and wallet is fully synced
Magnet explorer have some issue at least the first version
Try this one balance is more accurate http://explorer2.magnetwork.io/
That's the one I used. Anyway, the wallet have updated and now shows the same balance as shown on explorer. I think it was a glitch as all the latest transactions were visible in wallet even before it updated to current balance. Took it about 2 hours though
I am having the same issue. My balance is significantly less than what the block explorer shows. I have waited more than 4 hours. I do see all the transactions though so hopefully final balance will get updated soon.
Ok so my balance hasn't been updated yet after more than 24 hours. I did delete all the files except wallet.dat and mag config. The wallet has synced and staking as well. Any other ideas?
Hello, I have the same problem. Please, tell me, how did you fix your wallet problem? Thx
April 25, 2018, 02:51:38 PM
This is a great project and worth to invest 
April 25, 2018, 04:09:32 AM
Ok so my balance hasn't been updated yet after more than 24 hours. I did delete all the files except wallet.dat and mag config. The wallet has synced and staking as well. Any other ideas?
try running "repairwallet" command in console.
April 24, 2018, 11:50:17 PM
My wallet balance is significantly less than what I can see on block explorer. Wallet shows a total of only 2865.95892145 MAG but on explorer the balance is 4134.67052232 MAG. I couldn't find differences in transactions. Can someone help me please? My adress is MueAeP9aV2XTaY5LvyMReCCbZWbzj2hWkH and wallet is fully synced
Magnet explorer have some issue at least the first version
Try this one balance is more accurate http://explorer2.magnetwork.io/
That's the one I used. Anyway, the wallet have updated and now shows the same balance as shown on explorer. I think it was a glitch as all the latest transactions were visible in wallet even before it updated to current balance. Took it about 2 hours though
I am having the same issue. My balance is significantly less than what the block explorer shows. I have waited more than 4 hours. I do see all the transactions though so hopefully final balance will get updated soon.
Ok so my balance hasn't been updated yet after more than 24 hours. I did delete all the files except wallet.dat and mag config. The wallet has synced and staking as well. Any other ideas?
Jump to: