[ANN][MAG] MAGNET - GOES STELLAR - More in description / magnetwork.io - page 54.

pitt59

newbie

Activity: 100

Merit: 0

lol can coinexchange.io list btcz Grin

btcz has no pre mine, no ico, no dev fee, we have been asking you to list us there for a long time already and we cant pay for exchange fees we wanted cryptopia but 5btc is insane since only miners are pirching a few sats per day to get listed on a few exchanges, and i can say thou tradesatoshi is a really small exchange they didnt charge us to be listed there

and i can say coinexchange i have no problem just that on 5 exchanges i use its the last choice cos they dont have much coins that i have, cryptopia was last well until etn was listed there

bitChipper

sr. member

Activity: 896

Merit: 290

Quote from: Patron7 on January 08, 2018, 01:45:24 PM

Friends, the exchange Coinexchange has so much bad reputation that it seems to be a scam there are many unresolved tickets, it is possible to access another exchange for all MAG owners since the price is going down due to that

https://bitcointalk.org/index.php?topic=1532173.240

I havent had hardly any issues with coinexchange other than the occasional downtime that almost every exchange is going through
at the moment.

But i do think that Magnet needs to get listed on another exchange, I think we should go for cryptopia, but really any second
exchange would be good, just in case for some reason coinexchange.io goes down we would have a back up market.

traffer

newbie

Activity: 36

Merit: 0

are there any pools where i can mine just MAG? with stats and account

Patron7

newbie

Activity: 25

Merit: 0

Friends, the exchange Coinexchange has so much bad reputation that it seems to be a scam there are many unresolved tickets, it is possible to access another exchange for all MAG owners since the price is going down due to that

https://bitcointalk.org/index.php?topic=1532173.240

bitChipper

sr. member

Activity: 896

Merit: 290

Yes it is a decent project with nice see saw MN rewards, the setup of the masternode was a bit different but still easy

highly recommend if you are looking for good passive mn income

The_Don

sr. member

Activity: 308

Merit: 250

this one is good project currently iam earning good amount of money from it

Minerspain

newbie

Activity: 32

Merit: 0

Quote from: blockonomy on January 07, 2018, 11:44:33 PM

Quote from: Minerspain on January 07, 2018, 05:15:44 PM

Quote from: Minerspain on January 07, 2018, 03:23:59 PM

What is the minimum tx fee recommended for this coin?

I've already found it, is 0.01 Cheesy

In fact the minimum transaction fee is calculated as follow: minFee = 1 + (Bytes / 1000) * 0.0001
So for most transaction 0.0001 will work fine, anything higher may speed up the processing but is not needed right now as the network is far from being congestioned.

you're right!

Thanks!!

theonionman

newbie

Activity: 16

Merit: 0

Quote from: theonionman on January 06, 2018, 05:43:12 PM

Quote from: ?? on ??

https://i.imgur.com/XwNpQle.png

OFFICIAL ANNOUNCEMENT

There was bootstrap requested by the community many times in past few days.
We have uploaded a bootstrap file (http://magnetwork.io/Wallets/bootstrap.zip) to speed up the initial chain validation. You should extract bootstrap.dat into your wallet data folder and restart the wallet. It should allow any wallet to fully validate the Magnet blockchain in <30 minutes regardless of the internet connection speed. This file will be updated twice a month.
File checksum:
SHA256(bootstrap.zip)= 69b1618e539d774ec145e76c956f42d8042fbcd4fe201ac6531f01708dc8e058

P.S. Lot of request were made because of slow sync on VPS machines. To solve this problem, add line add maxconnections=50 to Your config file so it allows more connections. Number can be changed according to the needs.

Thank you very much for this! But I am still having issues... I first tried your suggestion of adding maxconnections=50 to the config file and restarting the wallet but it never connects to more than 20-some nodes and is still unbearably slow to sync. I have all the nodes added to the config from the main magnetwork.io instructions so unless there are more to add from elsewhere I should be good here. I then put the bootstrap file into my ~/.magnet directory and restarted the wallet. The bootstrap.dat file immediately changed to bootstrap.dat.old and after waiting a full hour it is no further along in the sync process than before. Very very slow. I've used bootstrap files for a number of other wallets without issues but typically they were on windows. I am in the process of setting up a temporary ubuntu box today to test this locally to see if I get the same results and if not, hopefully I can just copy over the .magnet directory and get this working. Thanks again for your suggestions and help thus far. I am determined to get this to work and I hope to have success today.

I doubt many were concerned about my ability to get the blockchain synced but I'm happy to announce I was able to get everything working. I believe I had some corruption going on as I ended up just nuking out the whole .magnet directory and re-setting up with the bootstrap from the beginning and I was up and running in a few minutes. Thanks guys for all the help!

blockonomy

member

Activity: 121

Merit: 15

Quote from: Minerspain on January 07, 2018, 05:15:44 PM

Quote from: Minerspain on January 07, 2018, 03:23:59 PM

What is the minimum tx fee recommended for this coin?

I've already found it, is 0.01 Cheesy

In fact the minimum transaction fee is calculated as follow: minFee = 1 + (Bytes / 1000) * 0.0001
So for most transaction 0.0001 will work fine, anything higher may speed up the processing but is not needed right now as the network is far from being congestioned.

Miguelpt

member

Activity: 353

Merit: 10

Multipools aims to be a provider of pools for multiple algorithms and coins in order to help with general blockchain decentralization and bring lower fees to our mining community.

As a launching promotion we will keep the fees at 0.5% for 7 days. After that the fees will be 1% with random happy hours of 0%

Welcome to our MAG Coin Pool.

Pool URL:

https://magnet.multipools.club/

Specs:

Dedicated Server
DDoS Protection
User Friendly Interface
Payments when every block arrives
Server Located in Europe
1% fee
NiceHash mining supported

Please feel free to share your feedback with us and we are more than welcome to review it and improve our service.

Send us your feedback to:

Email: [email protected]
Telegram Official Channel: https://t.me/multipools

Come chat with us on:

Telegram Support group: https://t.me/joinchat/GP6HXwxiGzDKiBucyWvbWQ

Now let’s mine!

Bitcointalk pool ANN: https://bitcointalk.org/index.php?topic=2707100.new#new

Minerspain

newbie

Activity: 32

Merit: 0

Quote from: Minerspain on January 07, 2018, 03:23:59 PM

What is the minimum tx fee recommended for this coin?

I've already found it, is 0.01 Cheesy

Minerspain

newbie

Activity: 32

Merit: 0

What is the minimum tx fee recommended for this coin?

Omnopon)

member

Activity: 434

Merit: 10

It is good that you made seeds initialization automatic, in order to make it completely decentralize.

CoinNLD

newbie

Activity: 70

Merit: 0

Quote from: ?? on ??

https://i.imgur.com/XwNpQle.png

OFFICIAL ANNOUNCEMENT

There was bootstrap requested by the community many times in past few days.
We have uploaded a bootstrap file (http://magnetwork.io/Wallets/bootstrap.zip) to speed up the initial chain validation. You should extract bootstrap.dat into your wallet data folder and restart the wallet. It should allow any wallet to fully validate the Magnet blockchain in <30 minutes regardless of the internet connection speed. This file will be updated twice a month.
File checksum:
SHA256(bootstrap.zip)= 69b1618e539d774ec145e76c956f42d8042fbcd4fe201ac6531f01708dc8e058

P.S. Lot of request were made because of slow sync on VPS machines. To solve this problem, add line add maxconnections=50 to Your config file so it allows more connections. Number can be changed according to the needs.

Ok did it! Thanks Dev. Rewards of masternode are coming in nicely since a couple of days. Keep up good work!

theonionman

newbie

Activity: 16

Merit: 0

Quote from: ?? on ??

https://i.imgur.com/XwNpQle.png

OFFICIAL ANNOUNCEMENT

There was bootstrap requested by the community many times in past few days.
We have uploaded a bootstrap file (http://magnetwork.io/Wallets/bootstrap.zip) to speed up the initial chain validation. You should extract bootstrap.dat into your wallet data folder and restart the wallet. It should allow any wallet to fully validate the Magnet blockchain in <30 minutes regardless of the internet connection speed. This file will be updated twice a month.
File checksum:
SHA256(bootstrap.zip)= 69b1618e539d774ec145e76c956f42d8042fbcd4fe201ac6531f01708dc8e058

P.S. Lot of request were made because of slow sync on VPS machines. To solve this problem, add line add maxconnections=50 to Your config file so it allows more connections. Number can be changed according to the needs.

Thank you very much for this! But I am still having issues... I first tried your suggestion of adding maxconnections=50 to the config file and restarting the wallet but it never connects to more than 20-some nodes and is still unbearably slow to sync. I have all the nodes added to the config from the main magnetwork.io instructions so unless there are more to add from elsewhere I should be good here. I then put the bootstrap file into my ~/.magnet directory and restarted the wallet. The bootstrap.dat file immediately changed to bootstrap.dat.old and after waiting a full hour it is no further along in the sync process than before. Very very slow. I've used bootstrap files for a number of other wallets without issues but typically they were on windows. I am in the process of setting up a temporary ubuntu box today to test this locally to see if I get the same results and if not, hopefully I can just copy over the .magnet directory and get this working. Thanks again for your suggestions and help thus far. I am determined to get this to work and I hope to have success today.

CoinNLD

newbie

Activity: 70

Merit: 0

Buy the dip! This is a good project. I have Masternode running and receiving 100 Mag a day now.
Join Discord and you can see that dev team is active. Responding in minutes.

In weekends sometimes these dumps after big pumps happen

zhongzy

sr. member

Activity: 546

Merit: 250

Quote from: ?? on ??

OFFICIAL ANNOUNCEMENT

There was bootstrap requested by the community many times in past few days.
We have uploaded a bootstrap file (http://magnetwork.io/Wallets/bootstrap.zip) to speed up the initial chain validation. You should extract bootstrap.dat into your wallet data folder and restart the wallet. It should allow any wallet to fully validate the Magnet blockchain in <30 minutes regardless of the internet connection speed. This file will be updated twice a month.
File checksum:
SHA256(bootstrap.zip)= 69b1618e539d774ec145e76c956f42d8042fbcd4fe201ac6531f01708dc8e058

P.S. Lot of request were made because of slow sync on VPS machines. To solve this problem, add line add maxconnections=50 to Your config file so it allows more connections. Number can be changed according to the needs.

ok ,i already changed my config file ,thanks dev ！

lovinder

newbie

Activity: 67

Merit: 0

Quote from: thecentennial on January 06, 2018, 03:59:07 AM

Why has MAG crapped out today?

Best thing is Buy the Dip

thecentennial

newbie

Activity: 5

Merit: 0

Why has MAG crapped out today?

blockonomy

member

Activity: 121

Merit: 15

Quote from: ?? on ??

Quote from: theonionman on January 05, 2018, 07:28:37 PM

Are there any plans to host bootstrap files so that we can get the blockchain sync done faster? My wallet says I have 23 connections but I've been waiting for 3 days for my blocks to download. Nothing wrong with my connection as it speed tests at 29Mbps. This is the only wallet I've had with this problem as most wallets sync super fast. Huh

We have had this problem before and it works if You add more nodes to the conf file. 23 connections is good, but if they all are not in the same region as Your machine then it can take a long time.

Also try to add maxconnections=35 for example (magnet.conf) to increase the availability through connection count.

Topic: [ANN][MAG] MAGNET - GOES STELLAR - More in description / magnetwork.io - page 54. (Read 83023 times)