Topic: [ANN][MGN] | 🚀MAGNA COIN🚀 | MASTERNODES | ZEROCOIN | ATOMIC SWAPS [ANN] - page 26. (Read 23947 times)
November 30, 2017, 09:05:11 AM
Why I don't see the list of masternodes in my wallet? Wallet was synchronized but masternodes didn't appear.
November 30, 2017, 05:45:22 AM
MC very low for this coin atm... Similar to XSH when it was first picked up. Hope the devs are still active! 
At the moment, we are working on the next wallet release. MNrank has been contacted and should be listing Magna Coin within the next 72hrs.
November 30, 2017, 04:36:41 AM
MC very low for this coin atm... Similar to XSH when it was first picked up. Hope the devs are still active!
November 29, 2017, 07:50:30 PM
Good luck for the new masternode, prepare it well, I might buy your masternode in the future
November 29, 2017, 01:05:49 AM
- How to Windows VPS Masternode setup -
1.Start mgn-qt.exe
2.set 10000MGN in 1block/1wallet/1address. (exam 5000+5000 , 99999+1 is NG).
3.wait 15 confirm.
4.Open Tools->Debug console menu.
5.Command
masternode genkey
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx << copy
6.Program end
7.Press Win+R key.
8.Commad
notepad %appdata%\MagnaCoin\mgn.conf
9.edit config file
rpcuser=USERNAME
rpcpassword=PASSWORD
rpcallowip=127.0.0.1
daemon=1
listen=1
server=1
masternode=1
masternodeprivkey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx(genkey)
externalip=127.0.0.1
masternodeaddr=VPS-IP-Address:57821
10.Setting Windows firewall (In/Out 57821 open)
11.start mgn-qt.exe and wait blocksync end.
12.Open Tools->Debug console menu.
13.Command
masternode start
Let's try!
1.Start mgn-qt.exe
2.set 10000MGN in 1block/1wallet/1address. (exam 5000+5000 , 99999+1 is NG).
3.wait 15 confirm.
4.Open Tools->Debug console menu.
5.Command
masternode genkey
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx << copy
6.Program end
7.Press Win+R key.
8.Commad
notepad %appdata%\MagnaCoin\mgn.conf
9.edit config file
rpcuser=USERNAME
rpcpassword=PASSWORD
rpcallowip=127.0.0.1
daemon=1
listen=1
server=1
masternode=1
masternodeprivkey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx(genkey)
externalip=127.0.0.1
masternodeaddr=VPS-IP-Address:57821
10.Setting Windows firewall (In/Out 57821 open)
11.start mgn-qt.exe and wait blocksync end.
12.Open Tools->Debug console menu.
13.Command
masternode start
Let's try!
thanks alot will test and report back
November 28, 2017, 05:13:42 PM
- How to Windows VPS Masternode setup -
1.Start mgn-qt.exe
2.set 10000MGN in 1block/1wallet/1address. (exam 5000+5000 , 99999+1 is NG).
3.wait 15 confirm.
4.Open Tools->Debug console menu.
5.Command
masternode genkey
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx << copy
6.Program end
7.Press Win+R key.
8.Commad
notepad %appdata%\MagnaCoin\mgn.conf
9.edit config file
rpcuser=USERNAME
rpcpassword=PASSWORD
rpcallowip=127.0.0.1
daemon=1
listen=1
server=1
masternode=1
masternodeprivkey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx(genkey)
externalip=127.0.0.1
masternodeaddr=VPS-IP-Address:57821
10.Setting Windows firewall (In/Out 57821 open)
11.start mgn-qt.exe and wait blocksync end.
12.Open Tools->Debug console menu.
13.Command
masternode start
Let's try!
1.Start mgn-qt.exe
2.set 10000MGN in 1block/1wallet/1address. (exam 5000+5000 , 99999+1 is NG).
3.wait 15 confirm.
4.Open Tools->Debug console menu.
5.Command
masternode genkey
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx << copy
6.Program end
7.Press Win+R key.
8.Commad
notepad %appdata%\MagnaCoin\mgn.conf
9.edit config file
rpcuser=USERNAME
rpcpassword=PASSWORD
rpcallowip=127.0.0.1
daemon=1
listen=1
server=1
masternode=1
masternodeprivkey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx(genkey)
externalip=127.0.0.1
masternodeaddr=VPS-IP-Address:57821
10.Setting Windows firewall (In/Out 57821 open)
11.start mgn-qt.exe and wait blocksync end.
12.Open Tools->Debug console menu.
13.Command
masternode start
Let's try!
November 28, 2017, 02:53:57 PM
is there a steps on how to setup a masternode ?
A guide is in the process of being made. For now, you can follow the masternode guide on PIVX. Make sure you use the correct ports when setting up. The port for masternodes is 57821.
Follow the exact same process with a 2nd VPS server.
November 28, 2017, 02:12:50 PM
is there a steps on how to setup a masternode ?
A guide is in the process of being made. For now, you can follow the masternode guide on PIVX. Make sure you use the correct ports when setting up. The port for masternodes is 57821.
November 28, 2017, 11:45:55 AM
is there a steps on how to setup a masternode ?
A guide is in the process of being made. For now, you can follow the masternode guide on PIVX. Make sure you use the correct ports when setting up. The port for masternodes is 57821.
November 28, 2017, 11:19:34 AM
is there a steps on how to setup a masternode ?
November 28, 2017, 11:07:00 AM
MNrank!? Dev 
I have just contacted MNrank to get Magna listed. With regards to bounties, translations will be added shortly.
November 28, 2017, 09:43:17 AM
MNrank!? Dev
November 28, 2017, 09:31:55 AM
What's new?!
How many people are engaged in a coin?
Why are there no awards for translations, posts on forums and so on?
Very very weak promotion (((
How many people are engaged in a coin?
Why are there no awards for translations, posts on forums and so on?
Very very weak promotion (((
November 28, 2017, 02:01:17 AM
Only bad thing is that the coins algo Quark have never the high prices.
November 27, 2017, 07:32:51 PM
anyone have issues keeping masternode alive? mine goes MISSING after several hours.. am i forgetting to do something.. docs say no Magna.conf is needed. is this wrong?
November 27, 2017, 03:35:35 PM
Very well that all mastemodes developers and their income will be burned, it will give a new growth coins.
Dude stop smoking that shit, it affects your brain. November 27, 2017, 03:11:38 PM
what's the port for masternode (mainnet)
57821
dev, when the Explorer is ready?
November 27, 2017, 12:38:45 PM
November 27, 2017, 08:15:23 AM
Very well that all mastemodes developers and their income will be burned, it will give a new growth coins.
November 27, 2017, 08:04:01 AM
Is terrano down ? Please admin check
MAGNA COIN Mining Pool
http://miningpool.shop
No register needed.. based on Yiimp pool..
Payout : Every 1hour
Fee : 0.9%
NICEHASH RENTAL
http://miningpool.shop
No register needed.. based on Yiimp pool..
Payout : Every 1hour
Fee : 0.9%
Code:
-a quark -o stratum+tcp://Eu1.miningpool.shop:4033 -u -p c=MGN
NICEHASH RENTAL
Code:
Pool host: eu1.miningpool.shop
Pool port: 4033
Pool user: Your_Wallet_Address
Pool pass: d= 0.02 c=MGN
Algorithm: Quark
Pool port: 4033
Pool user: Your_Wallet_Address
Pool pass: d= 0.02 c=MGN
Algorithm: Quark
Code:
Bounty Address : D6F99F4FqToQCs9HNWJPq3txmVWcou6Zwj
Jump to: