Is this the same as the first release or did you restart blockchain?
updated client, but same release. i realized the premine was so small compared to everything else, rather than as big as everyone on the thread promoted it.
Topic: [ANNOUNCING]Sauron Rings (SAU) | Show your support for Sauron! | PoW | Rare! - page 3. (Read 2338 times)
September 10, 2013, 07:19:32 PM
updated client, but same release. i realized the premine was so small compared to everything else, rather than as big as everyone on the thread promoted it.
September 10, 2013, 07:18:04 PM
Is this the same as the first release or did you restart blockchain?
September 10, 2013, 07:06:07 PM
i smell copyrights
September 10, 2013, 07:05:55 PM
cannot seem to connect to any nodes
j
j
Hey, duuuuuude!
Do the nodes above not work (set them in your SauronRings.conf)? If so, I may open up a bounty for some more. Thanks for your feedback!
September 10, 2013, 07:02:25 PM
reserved for future lulz 
perhaps you need an installer built for this puppy?
perhaps you need an installer built for this puppy?
I'd happily accept an installer for this puppy
once it gets established enough. For now a qt is fine.How are your coins doing? (OpenSouceCoin is your newest, I believe)
September 10, 2013, 07:02:06 PM
Code:
int64 static GetBlockValue(int nHeight, int64 nFees)
{
int64 nSubsidy = 0.001 * COIN;
if(nHeight == 3)
{
nSubsidy = 10 * COIN;
}
return nSubsidy + nFees;
}
{
int64 nSubsidy = 0.001 * COIN;
if(nHeight == 3)
{
nSubsidy = 10 * COIN;
}
return nSubsidy + nFees;
}
Except for the pre-mine, coin production will be constant and infinite. Not capped as stated in the specs.
Wow! If there are no coin caps then the premine is 0%...
Thanks for the info!I remember putting in 20,000 in main.h though...
The MAX_MONEY constant in main.h doesn't limit coin production.
September 10, 2013, 06:55:56 PM
Code:
int64 static GetBlockValue(int nHeight, int64 nFees)
{
int64 nSubsidy = 0.001 * COIN;
if(nHeight == 3)
{
nSubsidy = 10 * COIN;
}
return nSubsidy + nFees;
}
{
int64 nSubsidy = 0.001 * COIN;
if(nHeight == 3)
{
nSubsidy = 10 * COIN;
}
return nSubsidy + nFees;
}
Except for the pre-mine, coin production will be constant and infinite. Not capped as stated in the specs.
Wow! If there are no coin caps then the premine is 0%...
Thanks for the info!I remember putting in 20,000 in main.h though...
September 10, 2013, 06:43:57 PM
Code:
int64 static GetBlockValue(int nHeight, int64 nFees)
{
int64 nSubsidy = 0.001 * COIN;
if(nHeight == 3)
{
nSubsidy = 10 * COIN;
}
return nSubsidy + nFees;
}
{
int64 nSubsidy = 0.001 * COIN;
if(nHeight == 3)
{
nSubsidy = 10 * COIN;
}
return nSubsidy + nFees;
}
Except for the pre-mine, coin production will be constant and infinite. Not capped as stated in the specs.
September 10, 2013, 06:37:41 PM
reserved for future lulz
perhaps you need an installer built for this puppy?
perhaps you need an installer built for this puppy?
September 10, 2013, 06:35:09 PM
reserve!
September 10, 2013, 06:34:15 PM
smeagol is proudly announcing:
Sauron's Rings!
(SauronRings, SAU)
Windows qt: https://docs.google.com/file/d/0B49exKIsGBn5c0t5ZGQ4X011MlU/edit
Port forward 1892 and post your node!
The Proof-of-Work, scarce, Scrypt coin for YOU to show your support for Sauron and Gollum! (I'm smeagol, the nice one).
If you download, please post your node so others can keep in sync! Thanks!
Specifications (Saruman is in charge of this)
Block time: 1.5 minutes (90 seconds)
Block reward: 0.001 Rings
Coin cap: None! Honor Sauron forever!
Difficulty algorithm: Every two blocks based on last four blocks! AGRESSIVE DIFF RETARGETING! don't put all of your rig power to it yet, please!
RPC port: 2222 (the second age!)
P2P port: 1892 (Tolkien's birth)
Testnet: 1973 (Death of Tolkien)
Addresses: They start with B, because B is for Bilbo Baggins, the second hobbit to own the one ring thanks eli0t!
Downloads:
Windows qt: https://docs.google.com/file/d/0B49exKIsGBn5c0t5ZGQ4X011MlU/edit
Source: https://github.com/sauronrings/SauronRings
If you download, please post your node so others can keep in sync! Thanks!
sauronrings.conf
port=1892
rpcport=2222
addnode=79.196.195.23
addnode=192.241.171.45
Pools?
Not yet.
Block Explorer?
Nothing yet.
Rewards and Bounties?
0.05 : Pool
0.1 : Exchange
0.01 : Block Explorer
0.01 : Faucet
Premine?
0.05%
Anything else?
Here's a picture of Barad-dûr! Also, send some coins and stuff. The transaction icons are a surprise! Have fun!
Sauron's Rings!
(SauronRings, SAU)
Windows qt: https://docs.google.com/file/d/0B49exKIsGBn5c0t5ZGQ4X011MlU/edit
Port forward 1892 and post your node!
The Proof-of-Work, scarce, Scrypt coin for YOU to show your support for Sauron and Gollum! (I'm smeagol, the nice one
).If you download, please post your node so others can keep in sync! Thanks!
Specifications (Saruman is in charge of this
)Block time: 1.5 minutes (90 seconds)
Block reward: 0.001 Rings
Coin cap: None! Honor Sauron forever!
Difficulty algorithm: Every two blocks based on last four blocks! AGRESSIVE DIFF RETARGETING! don't put all of your rig power to it yet, please!
RPC port: 2222 (the second age!)
P2P port: 1892 (Tolkien's birth)
Testnet: 1973 (Death of Tolkien)
Addresses: They start with B, because B is for Bilbo Baggins, the second hobbit to own the one ring
thanks eli0t!Downloads:
Windows qt: https://docs.google.com/file/d/0B49exKIsGBn5c0t5ZGQ4X011MlU/edit
Source: https://github.com/sauronrings/SauronRings
If you download, please post your node so others can keep in sync! Thanks!
sauronrings.conf
port=1892
rpcport=2222
addnode=79.196.195.23
addnode=192.241.171.45
Pools?
Not yet.
Block Explorer?
Nothing yet.
Rewards and Bounties?
0.05 : Pool
0.1 : Exchange
0.01 : Block Explorer
0.01 : Faucet
Premine?
0.05%
Anything else?
Here's a picture of Barad-dûr! Also, send some coins and stuff. The transaction icons are a surprise! Have fun!
Jump to: