Pages:
Author

Topic: [ANN][P2POOL] p2pools on the siberia.mine.nu & crypto.mine.nu - page 4. (Read 33386 times)

jr. member
Activity: 66
Merit: 5
Mined today from 10 - 22
received 55 Dollars

but from 21.00 there was only 1 Block found so i decided to switch to another coin...
zpool is mining AUR on Qubit and found the most blocks. As long as the pool is so small, there is no profit.

Today until 21:00 was the AUR Network only the crypto.office Pool and mining was with profit.
legendary
Activity: 1308
Merit: 1011
I´m mining with baikal Giant

stratum+tcp://crypto.office-on-the.net:12355    
algo = qubit
User = Wallet Adress
PW = x
dont set the point on extranonce... then should work ;-)

Greets matwolt

It's better to mine here: http://crypto.mine.nu:12355/static/ - this channel is faster
Here are the settings of the asic:
- URL: stratum+tcp://crypto.mine.nu:12355
- User: Your_AUR_address
- Password: x
Instead of Your_AUR_address, specify the address from your wallet.
jr. member
Activity: 66
Merit: 5
I´m mining with baikal Giant

stratum+tcp://crypto.office-on-the.net:12355   
algo = qubit
User = Wallet Adress
PW = x
dont set the point on extranonce... then should work ;-)

Greets matwolt
legendary
Activity: 1308
Merit: 1011
It is a pity that you did not wait for the maximum payments

when will i get payment for cannabis coin? i mine on your pool more than 12 hours now, but no payments received.
What address do you mine to? Check payments to it in the block explorer https://chainz.cryptoid.info/cann/. All workers, who are now mining on CANN node, get payments with each block. If you specified the deposit address of the exchange and do not receive transactions on your address, then ask at the exchange. Its better not to mine to the deposit addresses of exchanges on the p2pool. Exchanges can appropriate generated transactions. You need to install a wallet, and mine to it. Other miners say that they mine to http://bittrex.com/ and http://poloniex.com/ deposites, but I personally do not.
newbie
Activity: 6
Merit: 0
It is a pity that you did not wait for the maximum payments

when will i get payment for cannabis coin? i mine on your pool more than 12 hours now, but no payments received.
newbie
Activity: 6
Merit: 0
i mine cannabis coin on your pool, but i have an question. After 11 hours mining on your pool, i was not received any payment to my wallet.
When will i get payment from your pool?
jr. member
Activity: 66
Merit: 5
I talked with a friend just before a few minutes who have another 25 Baikal giant2000 Miners and a few A900. Together we can mine with about 80 GH/s.
We will start tomorrow with mining on : http://crypto.office-on-the.net:12355 

I think with 80 GH/s it would be able to mine AUR with profit for our miners and we can get more Blocks then Zpool at the moment ;.)

If someone would be help to make cryto.office to the AUR Mining pool Nr1 just start tomorrow with mining on it :-)

Greets matwolt
legendary
Activity: 1308
Merit: 1011
It is a pity that you did not wait for the maximum payments
jr. member
Activity: 66
Merit: 5
Yes, I tried yesterday about 4-5 hours, but only get ca 5,5 AUR.. this is to low for 9 Asics... More costs than profit. There was only one Miner in the Pool and the Netshare was about 120 GH.
But I didn't found another pool mith more than 15 GH which is mining AUR, so I think the rest is ZPool...
Maybe here in Forum are a few more Miners which are able to mine AUR, so the Pool is bigger and get more Blocks...Found 7 Blocks yesterday, in the same Time zpool mined about 25

Greets matwolt



legendary
Activity: 1308
Merit: 1011
I do not know if there are calculators for Auroracoin / Qubit.
I see that you are already mining. Have you decided to try it practically?
jr. member
Activity: 66
Merit: 5
Hi together,

i need a mining profit calculator for Auroracoin / Qubit. Every Calculator i found was for scrypt...
Mining now with 18 GH and it would be interesting how much i get

Greets matwolt
legendary
Activity: 1308
Merit: 1011
It's not down, just no one mines there http://crypto.mine.nu:12351
At least 1 GH is required to receive blocks stably with this algo
newbie
Activity: 82
Merit: 0
Aurora Coin myr-groestl pool is down for couple of days? Because i dont see any hashrate on the pool...is it an error on the web-site?
legendary
Activity: 1308
Merit: 1011
jtoomimnet found another block two days ago.

https://blockchain.info/block/00000000000000000096cef4bfd159307030923b0111acd39bfb6561b277a375

1014 kB, 3998 kWU, 13.858 BTC.

I have a jtoomimnet node on my server located at: http://crypto.mine.nu:9334
legendary
Activity: 1308
Merit: 1011
DGB (Scrypt) p2pool http://crypto.mine.nu:5025 was idle for a long time and no one was mining there, this has led to the fact that shares have become old. Your power was not enough to push these shares. Currently p2pool was speeded up by the miners on the other node. The global hasrate has risen:
Global pool rate is 1.74 GH/s now
And the pool started to catch the blocks.
Unfortunately this is how p2pools work: when you stop mining on them and the shares become obsolete, you need powers to speed up a pool. And this process is accompanied by a significant DOA.
Currently, it is possible to mine there. Pool is speeded up, so DOA will not be significant.
And the blocks will be found stable in accordance with the calculation
legendary
Activity: 1308
Merit: 1011
I've moved ports of BTC pools on my server. Miners, check what you are mining, refresh the page on the BTC pool tabs and move asics to the network you need.

http://crypto.mine.nu:9334  - BTC(1% fee, jtoomimnet)
Currently hashrate: Local rate: 62.29 TH/s (DOA 4.79 TH/s / 7.68%)
The resources used by the node (the moments of the maximum CPU load):


http://crypto.mine.nu:9330 - BTC(0% fee, jtoomimnet)
Currently hashrate: Local rate: 0.00 H/s
The resources used by the node (the moments of the maximum CPU load):


http://crypto.mine.nu:9332 - BTC(0% fee, ForrestVnet)
Currently hashrate: Local rate: 3.11 TH/s (DOA 214.18 GH/s / 6.88%)
The resources used by the node (the moments of the maximum CPU load):


CPU: AMD Ryzen 7 1800X Eight-Core Processor
For both jtoomimnet nodes one processor core is allocated.
Another one core works completely for ForrestVnet node.

crypto.mine.nu and crypto.office-on-the.net are different names of the same server with different Internet channels
legendary
Activity: 1308
Merit: 1011
Server shutdown is possible on 24th of august since 4:00 (UTC) to 13:00 (UTC)
All who mines on crypto.mine.nu and crypto.office-on-the.net, configure the list of backup nodes so that the asics switched to them in case of server shutdown
sr. member
Activity: 443
Merit: 251
Hey sawa,

can you add BTC pools merge mining support for 611 (SixEleven) [coin]?
Should improve your pool profitability at no cost Wink and support the 611 project with stable PoW hashing power...
legendary
Activity: 1308
Merit: 1011
I've added a p2pool node for mining Gulden [NLG]:
NLG Forum:Gulden P2pool: http://crypto.mine.nu:27100 || http://crypto.office-on-the.net:27100 Wallet: https://gulden.com/download
GPU/cgminer miner config:
Code:
cgminer --scrypt -o stratum+tcp://crypto.mine.nu:27100 -u Your_NLG_address -p x --expiry 1 --scan-time 1 --queue 0
or
cgminer --scrypt -o stratum+tcp://crypto.office-on-the.net:27100 -u Your_NLG_address -p x --expiry 1 --scan-time 1 --queue 0
ASIC config: "URL: crypto.mine.nu:27100, Login: Your_NLG_address, Password: x"
legendary
Activity: 1308
Merit: 1011
I've switched over my BTC nodes to jtoomimnet.
Now both http://crypto.office-on-the.net:9334 and http://crypto.office-on-the.net:9332 work in one network
Who was mining at port 9334 can connect your asics to port 9332, if you do not want to pay me 1% fee - there's 0% fee.
It is better to switch to http://crypto.mine.nu:9334 or http://crypto.mine.nu:9332 - this is a faster channel to the same server where crypto.office-on-the.net is
Pages:
Jump to: