Wallet is fully synced at 259881, I bought coins during I think the 2.0.1, whenever it was working before, they are conflicted now. Am I out on those cause if so that sucks.
Not even going to have enough to run a masternode if that's the case
Topic: [ANN][PIVX] - PRIVATE INSTANT VERIFIED TRANSACTION - PROOF OF STAKE - ZEROCOIN - page 367. (Read 782375 times)
August 13, 2016, 02:01:58 PM
August 13, 2016, 01:59:04 PM
Yep all matched up.
August 13, 2016, 01:56:26 PM
Yep all good here too.
August 13, 2016, 01:54:08 PM
done syncing.
last block
getblockhash 259733
49178800268f44812c5b0dfd99f9875ddc24dbd90988e431fd4bf2b9761f4fc3
Matches mine.last block
getblockhash 259733
49178800268f44812c5b0dfd99f9875ddc24dbd90988e431fd4bf2b9761f4fc3
Same here.
August 13, 2016, 01:48:51 PM
Just a blockhash for folks to check.
If you enter "getblockhash 259852" in the console you should get 8b59e1cdbf2fd60ef1a28bb8a09a8c9bc660ac0977d933b5584ca34ff7dfb2e6
If you enter "getblockhash 259852" in the console you should get 8b59e1cdbf2fd60ef1a28bb8a09a8c9bc660ac0977d933b5584ca34ff7dfb2e6
August 13, 2016, 01:34:05 PM
done syncing.
last block
getblockhash 259733
49178800268f44812c5b0dfd99f9875ddc24dbd90988e431fd4bf2b9761f4fc3
Matches mine.last block
getblockhash 259733
49178800268f44812c5b0dfd99f9875ddc24dbd90988e431fd4bf2b9761f4fc3
Same here.
August 13, 2016, 01:25:59 PM
done syncing.
last block
getblockhash 259733
49178800268f44812c5b0dfd99f9875ddc24dbd90988e431fd4bf2b9761f4fc3
Matches mine. last block
getblockhash 259733
49178800268f44812c5b0dfd99f9875ddc24dbd90988e431fd4bf2b9761f4fc3
August 13, 2016, 01:24:59 PM
done syncing.
last block
getblockhash 259733
49178800268f44812c5b0dfd99f9875ddc24dbd90988e431fd4bf2b9761f4fc3
last block
getblockhash 259733
49178800268f44812c5b0dfd99f9875ddc24dbd90988e431fd4bf2b9761f4fc3
August 13, 2016, 01:21:30 PM
64 bit Linux wallet is up. https://github.com/Darknet-Crypto/Darknet/releases/download/v2.0.4.0/Linux64.zip
August 13, 2016, 01:15:51 PM
Just sync from scratch. Its not like it takes that long.....
August 13, 2016, 01:05:58 PM
Just to keep this at the bottom of the page for those who hate reading.
Really, I would like to see everyone try it without addnodes. We really shouldn't need them, we haven't for the past several releases. I added a lot of hardcoded nodes long before PoS. Everyone's wallet should just connect. With that said I will list a few if people can't seem to connect.
The 64 bit Windows binary is up, as well. I will get the others up as they finish building. https://github.com/Darknet-Crypto/Darknet/releases/download/v2.0.4.0/Windows64_Qt.exe
And just to reinforce it. Either be certain that your blockchain backup is pre-PoS, aka block 259200, or sync from scratch.
OK everyone, first, you guys are awesome. I just want to reiterate a few of the comments above about how great this community is being as we work through these issues.
Now, onto the reason for my post. For all of you self compilers out there v2.0.4.0 is up on github, delete your peers.dat and either use a pre-PoS blockchain backup, or sync from scratch. If you are not 100% sure that your backup is from before block 259200 fire up an older version of the wallet with your backup and verify the block number. We seem to have a lot of people not following this step, which is exacerbating the problems with our testing.
We will get the precompiled binaries up as quickly as we can, let's try to break this one, we think we have it fixed, but, as you all know, it is not the first time we thought that. Most of the previous fixes were based on less complete info than this one, so....
Everyone should not get too attached to any coins you have staked or earned with your masternodes, once we confirm the problems are solved we will be rolling back to the beginning of PoS, so if that is the reason some of you are not replacing your blockchain when switching to the new version, please stop.
As usual, report all issues here, we really need your help. So far all of these versions have worked well when testing with a small group, it isn't until we release you guys on it that you are able to break it for us and further the cause. We just want to thank you all again for being so great about this.
Now, onto the reason for my post. For all of you self compilers out there v2.0.4.0 is up on github, delete your peers.dat and either use a pre-PoS blockchain backup, or sync from scratch. If you are not 100% sure that your backup is from before block 259200 fire up an older version of the wallet with your backup and verify the block number. We seem to have a lot of people not following this step, which is exacerbating the problems with our testing.
We will get the precompiled binaries up as quickly as we can, let's try to break this one, we think we have it fixed, but, as you all know, it is not the first time we thought that. Most of the previous fixes were based on less complete info than this one, so....
Everyone should not get too attached to any coins you have staked or earned with your masternodes, once we confirm the problems are solved we will be rolling back to the beginning of PoS, so if that is the reason some of you are not replacing your blockchain when switching to the new version, please stop.
As usual, report all issues here, we really need your help. So far all of these versions have worked well when testing with a small group, it isn't until we release you guys on it that you are able to break it for us and further the cause. We just want to thank you all again for being so great about this.
pardon me which nodes for "protocolversion" : 70600 ?
Really, I would like to see everyone try it without addnodes. We really shouldn't need them, we haven't for the past several releases. I added a lot of hardcoded nodes long before PoS. Everyone's wallet should just connect. With that said I will list a few if people can't seem to connect.
The 64 bit Windows binary is up, as well. I will get the others up as they finish building. https://github.com/Darknet-Crypto/Darknet/releases/download/v2.0.4.0/Windows64_Qt.exe
August 13, 2016, 01:01:33 PM
Deleted nodes, took a bit but starting to sync from scratch now
August 13, 2016, 12:55:57 PM
So if i download this one and sync from scratch can I use my current wallet.dat file? Thanks.
Yeah, use your wallet.dat.syncing now. thanks!
edit: no connections yet. deleted all from roaming except wallet.dat
ed2: syncing now. Took like 5 minutes to find connection but all good now. Peer list just has one
173.245.158.8:51472
August 13, 2016, 12:52:29 PM
So if i download this one and sync from scratch can I use my current wallet.dat file? Thanks.
Yeah, use your wallet.dat. August 13, 2016, 12:50:52 PM
pardon me which nodes for "protocolversion" : 70600 ?
Really, I would like to see everyone try it without addnodes. We really shouldn't need them, we haven't for the past several releases. I added a lot of hardcoded nodes long before PoS. Everyone's wallet should just connect. With that said I will list a few if people can't seem to connect.
The 64 bit Windows binary is up, as well. I will get the others up as they finish building. https://github.com/Darknet-Crypto/Darknet/releases/download/v2.0.4.0/Windows64_Qt.exe
So if i download this one and sync from scratch can I use my current wallet.dat file? Thanks.
August 13, 2016, 12:42:38 PM
pardon me which nodes for "protocolversion" : 70600 ?
for start I have 2 master nodes both at the following sync point
{
"version" : 2000400,
"protocolversion" : 70600,
"walletversion" : 61000,
"balance" : 10000.91355966,
"obfuscation_balance" : 0.00000000,
"blocks" : 261014,
"timeoffset" : 0,
"connections" : 4,
"proxy" : "",
"difficulty" : 20663.46769305,
"testnet" : false,
"keypoololdest" : 1470928679,
"keypoolsize" : 1002,
"paytxfee" : 0.00000000,
"relayfee" : 0.00010000,
"staking status" : "Staking Not Active",
"errors" : ""
}
for start I have 2 master nodes both at the following sync point
{
"version" : 2000400,
"protocolversion" : 70600,
"walletversion" : 61000,
"balance" : 10000.91355966,
"obfuscation_balance" : 0.00000000,
"blocks" : 261014,
"timeoffset" : 0,
"connections" : 4,
"proxy" : "",
"difficulty" : 20663.46769305,
"testnet" : false,
"keypoololdest" : 1470928679,
"keypoolsize" : 1002,
"paytxfee" : 0.00000000,
"relayfee" : 0.00010000,
"staking status" : "Staking Not Active",
"errors" : ""
}
You did not listen. We are not at that block yet. delete your chain and sync from scrath or use a backup from before block 259200.
got ya no problem at all, I was using https://www.dropbox.com/s/njdjxmsvhwh6njf/.darknet.zip?dl=0 from the prev backup and I go to that block #, np.. will resync fresh without any backup plus remove nodes from conf.. hold a sec
Thanks.
August 13, 2016, 12:40:10 PM
pardon me which nodes for "protocolversion" : 70600 ?
for start I have 2 master nodes both at the following sync point
{
"version" : 2000400,
"protocolversion" : 70600,
"walletversion" : 61000,
"balance" : 10000.91355966,
"obfuscation_balance" : 0.00000000,
"blocks" : 261014,
"timeoffset" : 0,
"connections" : 4,
"proxy" : "",
"difficulty" : 20663.46769305,
"testnet" : false,
"keypoololdest" : 1470928679,
"keypoolsize" : 1002,
"paytxfee" : 0.00000000,
"relayfee" : 0.00010000,
"staking status" : "Staking Not Active",
"errors" : ""
}
for start I have 2 master nodes both at the following sync point
{
"version" : 2000400,
"protocolversion" : 70600,
"walletversion" : 61000,
"balance" : 10000.91355966,
"obfuscation_balance" : 0.00000000,
"blocks" : 261014,
"timeoffset" : 0,
"connections" : 4,
"proxy" : "",
"difficulty" : 20663.46769305,
"testnet" : false,
"keypoololdest" : 1470928679,
"keypoolsize" : 1002,
"paytxfee" : 0.00000000,
"relayfee" : 0.00010000,
"staking status" : "Staking Not Active",
"errors" : ""
}
You did not listen. We are not at that block yet. delete your chain and sync from scrath or use a backup from before block 259200.
got ya no problem at all, I was using https://www.dropbox.com/s/njdjxmsvhwh6njf/.darknet.zip?dl=0 from the prev backup and I go to that block #, np.. will resync fresh without any backup plus remove nodes from conf.. hold a sec
.darknet emptied leaving just wallet.dat and darknet.conf without addNode(s), latest git pull from master ... running now.. not yet synching ... \
seeing this which is good... lots of outdated wallets/master nodes, yet to find 70600
ok! protocol 70600 found! blockchain is syncing as we speak
okey dokey.. leaving two master nodes to synch and off outside it is like 100F thanks stakebox, keep @ it look at dash! freakin approaching 13$ a coin.. cheers man
August 13, 2016, 12:37:33 PM
pardon me which nodes for "protocolversion" : 70600 ?
Really, I would like to see everyone try it without addnodes. We really shouldn't need them, we haven't for the past several releases. I added a lot of hardcoded nodes long before PoS. Everyone's wallet should just connect. With that said I will list a few if people can't seem to connect.
The 64 bit Windows binary is up, as well. I will get the others up as they finish building. https://github.com/Darknet-Crypto/Darknet/releases/download/v2.0.4.0/Windows64_Qt.exe
got ya , following have been used, network is not moving past "blocks" : 261014
addnode=72.49.184.206
addnode=68.227.30.210
addnode=74.118.192.18
addnode=138.68.50.249
addnode=173.245.157.244
addnode=173.245.158.8
addnode=coin-server.com
addnode=24.119.187.242
August 13, 2016, 12:36:08 PM
pardon me which nodes for "protocolversion" : 70600 ?
for start I have 2 master nodes both at the following sync point
{
"version" : 2000400,
"protocolversion" : 70600,
"walletversion" : 61000,
"balance" : 10000.91355966,
"obfuscation_balance" : 0.00000000,
"blocks" : 261014,
"timeoffset" : 0,
"connections" : 4,
"proxy" : "",
"difficulty" : 20663.46769305,
"testnet" : false,
"keypoololdest" : 1470928679,
"keypoolsize" : 1002,
"paytxfee" : 0.00000000,
"relayfee" : 0.00010000,
"staking status" : "Staking Not Active",
"errors" : ""
}
for start I have 2 master nodes both at the following sync point
{
"version" : 2000400,
"protocolversion" : 70600,
"walletversion" : 61000,
"balance" : 10000.91355966,
"obfuscation_balance" : 0.00000000,
"blocks" : 261014,
"timeoffset" : 0,
"connections" : 4,
"proxy" : "",
"difficulty" : 20663.46769305,
"testnet" : false,
"keypoololdest" : 1470928679,
"keypoolsize" : 1002,
"paytxfee" : 0.00000000,
"relayfee" : 0.00010000,
"staking status" : "Staking Not Active",
"errors" : ""
}
You did not listen. We are not at that block yet. delete your chain and sync from scrath or use a backup from before block 259200.
August 13, 2016, 12:34:56 PM
pardon me which nodes for "protocolversion" : 70600 ?
Really, I would like to see everyone try it without addnodes. We really shouldn't need them, we haven't for the past several releases. I added a lot of hardcoded nodes long before PoS. Everyone's wallet should just connect. With that said I will list a few if people can't seem to connect.
The 64 bit Windows binary is up, as well. I will get the others up as they finish building. https://github.com/Darknet-Crypto/Darknet/releases/download/v2.0.4.0/Windows64_Qt.exe
Jump to: