Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 210. (Read 487800 times)
July 31, 2017, 11:43:01 AM
I recently tried out MiningPoolHub for a bit, ended up mining Maxcoin for a while and turned off the Auto Exchange feature for that coin. After failing to setup my offline wallet for it, I decided to just exchange the coins on MPH. So reactivated the auto exhange, moved the coins over to 'credited for auto exchange', then they eventually disappeared. The problem is they haven't reappeared in any other currency! I only have BTC and ETH wallets with any amount in them and both are negligible amounts that total about 1/4 of what Maxcoin I had - but they were already there anyway. I don't have anything setup for auto withdraw. It's been about 4 days now and I'm thinking the coins aren't going to appear... Any clue what happened?
July 31, 2017, 11:03:53 AM
My stratum connection has been spotty today. It keeps going on and off for 5-30 mins at a go, bringing down most of my rigs. However there's sometimes 1-2 still mining, but with the other rigs unable to connect. Anyone else facing this issue?
My 4 rigs are running OK, but sometimes it's a bit flakey getting connected to the MPH web site - could just be my connection.
July 31, 2017, 10:54:25 AM
My stratum connection has been spotty today. It keeps going on and off for 5-30 mins at a go, bringing down most of my rigs. However there's sometimes 1-2 still mining, but with the other rigs unable to connect. Anyone else facing this issue?
Try change other sever, don't use main sever because maybe main sever have many miner using and congested. July 31, 2017, 10:46:49 AM
My XMR-Stak-NVIDIA also has stopped hashing about 2 hours ago. I'm in the office so I can't restart, I definitely have to setup TeamViewer to be able to restart remotely...
July 31, 2017, 10:33:11 AM
My stratum connection has been spotty today. It keeps going on and off for 5-30 mins at a go, bringing down most of my rigs. However there's sometimes 1-2 still mining, but with the other rigs unable to connect. Anyone else facing this issue?
July 30, 2017, 11:40:30 PM
Static diff does not work and your vardiff algorithm is buggy, (for digibyte-skein) at least.
setting works, for a while and sets the difficulty at 1.536 and then vardiff kicks in and changes it.
vardiff keeps increasing the difficulty until the miner submits nothing for a a few minutes. After not submitting shares for a few minutes vardiff drops the difficulty a notch, and I can see 1-2 shares if it gets lucky, and then bumps up difficulty again -> no shares -> lower a notch -> 1-2 shares -> increase -> rinse and repeat.
in 2 hours of mining with same test hardware, the block factory earned 120 DGB while mining pool hub earned 14 DGB, this is fudged up. (Yes, 120 vs 14 it is not a typo)
In the test hardware there is a mix of 1080/1070/1060s and vardiff setting the difficulty to something over 8, even 1080(~1GH) cannot find a share. I'm curious what the vardiff algorithm is targeting for..
setting
Code:
-p d=1.536
vardiff keeps increasing the difficulty until the miner submits nothing for a a few minutes. After not submitting shares for a few minutes vardiff drops the difficulty a notch, and I can see 1-2 shares if it gets lucky, and then bumps up difficulty again -> no shares -> lower a notch -> 1-2 shares -> increase -> rinse and repeat.
in 2 hours of mining with same test hardware, the block factory earned 120 DGB while mining pool hub earned 14 DGB, this is fudged up. (Yes, 120 vs 14 it is not a typo)
In the test hardware there is a mix of 1080/1070/1060s and vardiff setting the difficulty to something over 8, even 1080(~1GH) cannot find a share. I'm curious what the vardiff algorithm is targeting for..
July 30, 2017, 06:13:24 PM
It's on my todo list. Also, I've updated that miner; use the new version.
https://github.com/KlausT/ccminer/releases/download/8.11/ccminer-811-x64.zip
Hey, aaronsace, noticed SIB and LBRY are missing from the algorithm lists. Those oversight or have they been permanently removed?
Do you mean in the example '.bat' file? I will add Decred, LBRY and SIB.
Done:
https://github.com/aaronsace/MultiPoolMiner/commit/d31d6c36ab8f38e613824d33536f7b58d0d75cb4
July 30, 2017, 05:23:49 PM
It's on my todo list. Also, I've updated that miner; use the new version.
https://github.com/KlausT/ccminer/releases/download/8.11/ccminer-811-x64.zip
Hey, aaronsace, noticed SIB and LBRY are missing from the algorithm lists. Those oversight or have they been permanently removed?
July 30, 2017, 04:09:48 PM
EDIT: found it, thanks MPH https://miningpoolhub.com/index.php?page=api&action=getuserallbalances&api_key=
Is there a way to get the all of the balances from the api?
A way without having to parse html or having to call getdashboarddata on each pool?
Is there a way to get the all of the balances from the api?
A way without having to parse html or having to call getdashboarddata on each pool?
July 30, 2017, 02:56:22 PM
the difficulty rates on the profitability api is different the the networkdiff on the pool JSON page which are both different from the difficulty displayed on the dashboard/pool gui, is one more up-to-date or refreshed more frequently or are they just updated at different times?
http://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics&hardware=nvidia
https://verge-scrypt.miningpoolhub.com/index.php?page=dashboard
https://verge-scrypt.miningpoolhub.com/index.php?page=statistics&action=pool **JSON link**
http://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics&hardware=nvidia
https://verge-scrypt.miningpoolhub.com/index.php?page=dashboard
https://verge-scrypt.miningpoolhub.com/index.php?page=statistics&action=pool **JSON link**
July 30, 2017, 02:14:29 PM
How can I check the total amount of mined coins for specific coin? Where to find the total payouts?
Thanks.
Thanks.
July 30, 2017, 01:22:13 PM
I also have that issue with XMR-STAK-NVIDIA...
July 30, 2017, 01:07:41 PM
about multipoolminer
is it possible to add something like if miner hasrate is 0 mh for at lease 10 minutes it restart the miner ?
because i notice this, miner not working and nothing happen it s 0 mh for at lease 20 minutes, wonder how long it will stay like this
is it possible to add something like if miner hasrate is 0 mh for at lease 10 minutes it restart the miner ?
because i notice this, miner not working and nothing happen it s 0 mh for at lease 20 minutes, wonder how long it will stay like this
It's on my todo list. Also, I've updated that miner; use the new version.
https://github.com/KlausT/ccminer/releases/download/8.11/ccminer-811-x64.zip
July 30, 2017, 12:59:13 PM
about multipoolminer
is it possible to add something like if miner hasrate is 0 mh for at lease 10 minutes it restart the miner ?
because i notice this, miner not working and nothing happen it s 0 mh for at lease 20 minutes, wonder how long it will stay like this
is it possible to add something like if miner hasrate is 0 mh for at lease 10 minutes it restart the miner ?
because i notice this, miner not working and nothing happen it s 0 mh for at lease 20 minutes, wonder how long it will stay like this
July 30, 2017, 06:42:14 AM
Thats what I did, my rig did not mine during night but I got no mail... or does it only work for hub workers?
July 30, 2017, 04:54:55 AM
How can I configure email notifications for my workers?
In your worker configuration just check monitor ON for specific worker. After that I believe you'll get email notification if specific worker goes idle for 10 mins.
July 30, 2017, 01:46:59 AM
How can I configure email notifications for my workers?
July 29, 2017, 01:00:31 AM
@miningpoolhub
any ETA on when will you be adding new coins in your pool?
Btw - thanks for fixing email notification, works fine.
Cheers.
any ETA on when will you be adding new coins in your pool?
Btw - thanks for fixing email notification, works fine.
Cheers.
July 28, 2017, 03:30:40 PM
Any plans for adding HUSH (Equihash)?
July 28, 2017, 02:49:08 AM
Hi MPH Admin,
I have been mining the multi-port scrypt algo on your site for a week or so and have autoexchange set to Ethereum. All the scrypt coins are exchanging fine except for SXC. It's been stuck on "credited for autoexchange", but never moves to "on exchange". There are about 2000 coins waiting. Any ideas?
Thanks in advance.
I have been mining the multi-port scrypt algo on your site for a week or so and have autoexchange set to Ethereum. All the scrypt coins are exchanging fine except for SXC. It's been stuck on "credited for autoexchange", but never moves to "on exchange". There are about 2000 coins waiting. Any ideas?
Thanks in advance.
I've had waits of many hours waiting for exchanges. How long have you been waiting?
Been waiting about a week. For me, it's only SXC that's "stuck". The rest seems to be exchanging ok.
Jump to: