UPDATE
1. ARG coin was added on new argon2d4096 algorithm mining pool.
Topic: [ANN][POOL] ZERGPOOL.com - Multialgo, autoexchange, 0.5% fee, 250+ coins - page 24. (Read 57849 times)
February 22, 2019, 12:23:23 AM
February 21, 2019, 09:13:33 PM
NPlusMiner ZergPool Edition
https://github.com/MrPlusGH/NPlusMiner-ZergPool-Edition
Last Release:
NPlusMiner with GUI, AutoUpdate, Earnings Tracker and Monitoring
This is a branded and pre-configured ZergPool version of NPlusMiner
Enjoy mining ZergPool automatically switching to the most profitable algorithm and track your earnings.
Comes with auto update so you don't have to worry about new algorithms or miners.
Screenshot and information : https://github.com/MrPlusGH/NPlusMiner-ZergPool-Edition
Any questions?
BitcoinTalk: https://bitcointalksearch.org/topic/nplusminer-multirig-remote-managementaiautoupdatepoolalgo-switching-2965976
Discord: https://discord.gg/2BCqPxe
+MrPlus
https://github.com/MrPlusGH/NPlusMiner-ZergPool-Edition
Last Release:
NPlusMiner with GUI, AutoUpdate, Earnings Tracker and Monitoring
This is a branded and pre-configured ZergPool version of NPlusMiner
Enjoy mining ZergPool automatically switching to the most profitable algorithm and track your earnings.
Comes with auto update so you don't have to worry about new algorithms or miners.
Screenshot and information : https://github.com/MrPlusGH/NPlusMiner-ZergPool-Edition
Any questions?
BitcoinTalk: https://bitcointalksearch.org/topic/nplusminer-multirig-remote-managementaiautoupdatepoolalgo-switching-2965976
Discord: https://discord.gg/2BCqPxe
+MrPlus
February 21, 2019, 12:29:10 PM
UPDATE
1. MTP Zcoin mining is now compatible with NiceHash start difficulty
1. MTP Zcoin mining is now compatible with NiceHash start difficulty
February 21, 2019, 12:28:15 PM
It is still doing that - some blocks found in solo mode, not showing as solo.
YEs, I was investigating it, between block find and block earnings processing might take up to 1 minute, so if you worker gets reconnected at this point, it might lead to an issue, I working to resolve it permanently.
February 21, 2019, 11:11:55 AM
It is still doing that - some blocks found in solo mode, not showing as solo.
February 21, 2019, 04:19:18 AM
UPDATE
Zergpool is now providing with block notification discord bot, please feel to free to try it out. You can find details in zergpool discord #zergpool-blockbot-info channel.
https://discordapp.com/invite/GmnVQSJ
Zergpool is now providing with block notification discord bot, please feel to free to try it out. You can find details in zergpool discord #zergpool-blockbot-info channel.
https://discordapp.com/invite/GmnVQSJ
February 20, 2019, 06:55:11 AM
UPDATE
To attract more miners we set 0% fee now for scrypt, x16r, x16rt and mtp algorithms at zergpool
To attract more miners we set 0% fee now for scrypt, x16r, x16rt and mtp algorithms at zergpool
I've added quite a bit on X16R. Maybe it'll pick up a bit.
Seems, no luck with RVN so far :/
I'm about 1/2 of the x16r power on the pool right now -- I have a LOT more power that I haven't moved back on Zerg yet (I am using less than 1/6th of my GPU power currently on it)… but I am torn between hitting x16r super hard or also putting some on x16rt and x22i.
I used to use NEMOSMINER but all the versions past 3.1 or so have become unstable on quite a few of my systems.
PS: I am also ~75% of the "yespower" hash-rate -- any plans to add more coins to that? I'm also only applying ~1/3rd of my CPU power to that so far.
----------
I got my friends farm fully back on ZERG yesterday; he has ~5-6% of the x16rt hash-rate on the pool and another ~8-9% of the yespower hash-rate =)
February 20, 2019, 03:35:45 AM
UPDATE
1. In order to attract more miners, we have set 0% mining pool fee for lyra2v3, bcd, lbry algorithms at http://zergpool.com
1. In order to attract more miners, we have set 0% mining pool fee for lyra2v3, bcd, lbry algorithms at http://zergpool.com
February 20, 2019, 03:35:23 AM
UPDATE
To attract more miners we set 0% fee now for scrypt, x16r, x16rt and mtp algorithms at zergpool
To attract more miners we set 0% fee now for scrypt, x16r, x16rt and mtp algorithms at zergpool
I've added quite a bit on X16R. Maybe it'll pick up a bit.
Seems, no luck with RVN so far :/
February 18, 2019, 06:29:26 PM
UPDATE
To attract more miners we set 0% fee now for scrypt, x16r, x16rt and mtp algorithms at zergpool
To attract more miners we set 0% fee now for scrypt, x16r, x16rt and mtp algorithms at zergpool
I've added quite a bit on X16R. Maybe it'll pick up a bit.
February 17, 2019, 02:46:47 PM
Yes, waiting CB to open, to sell for a better price for miners
I got what you mean. Thanks for attention.
So how about the latency API, can you make simultaneous data changes?
thanks again
February 17, 2019, 02:21:42 PM
Yes, waiting CB to open, to sell for a better price for miners
February 17, 2019, 12:52:18 PM
UPDATE
1. Exosis(EXO) coin was added, on new algorithm exosis.
1. Exosis(EXO) coin was added, on new algorithm exosis.
February 17, 2019, 12:51:48 PM
Hey. I tried to connect NH by API. Everything is very bad, your API works with delays, sometimes freezes for a long time, lost 0.07 btc.
Will there be changes?
Will there be changes?
Hi,
Can you give some more details, so we can improve? Like what algo or coin you tried
pinpin
I am primarily interested in data from here - http://api.zergpool.com:8080/api/status, but they are updated with a delay. First you have an update in the left table, where the coins http://www.zergpool.com/site/mining, I look at the Profit column, it takes a little time. Further, after some time, the data in the right table changes - the current estimate. And only in 15-30-45 seconds (sometimes longer) the data on the general API is updated (http://api.zergpool.com:8080/api/status). For me (NH) a very big update delay. Update the data everywhere at once or first here http://api.zergpool.com:8080/api/status.
Thank you, royal wishes.
Hi,
Have reduced time between API refresh by 10 sec
Hi,
I'm fine with time. The data on your site is slowly updated here - http://api.zergpool.com:8080/api/status
The delay from real data is more than 30 seconds, sometimes more than 1-3 minutes.
Give email. I'll send you a screen with notes. Here the picture is not attached.
Hi Zerguli. Why not answer?
This is of course tin, 6 bad blocks and a lot of non-payment.
Orphans may to happen, especially for some quick coins like VERGE. As for a payment, min threshold for payment 0.0025, so you should mine little more to reach it.
February 15, 2019, 03:41:51 PM
UPDATE
To attract more miners we set 0% fee now for scrypt, x16r, x16rt and mtp algorithms at zergpool
To attract more miners we set 0% fee now for scrypt, x16r, x16rt and mtp algorithms at zergpool
February 15, 2019, 03:26:04 PM
also just happened on globaltoken hmq1725 and plusonecoin hmq1725 38 minutes ago
February 15, 2019, 12:43:04 PM
19 minutes ago same thing happened to brazio block it does not shows as solo and it is missing from earnings
http://zergpool.com/?address=18HZHRS8yD1XF6HTjYixskWQk6NZf6bg2u
blockhash 00000000019578f2fdff6fb94e07e5833d2ea028819d08a363a80bdc68766d60
http://zergpool.com/?address=18HZHRS8yD1XF6HTjYixskWQk6NZf6bg2u
blockhash 00000000019578f2fdff6fb94e07e5833d2ea028819d08a363a80bdc68766d60
February 15, 2019, 01:47:01 AM
i have also noticed that in miner per coin it shows something like 1.4 Mh/s shared mode and 50.6 Mh/s solo mode on various algorythms while you can see that 3 miners that i run all use c=btc,m=solo it shows that i have shares in shared mode while i have shared configured only for progpow.
Checked your case seems on new work start(new POLY block), one share is being recorded as non solo referring to some worker id, already gone/disconnected.
Good it just one share, and I will keep monitoring to catch moment worker reconnects putting non solo share.
February 14, 2019, 05:07:07 PM
http://[img][img][/img][/img]
Hi,
Can you give some more details, so we can improve? Like what algo or coin you tried
pinpin
Algo - X11, Sha256, scrypt,x16,lyra2v2.
I am primarily interested in data from here - http://api.zergpool.com:8080/api/status, but they are updated with a delay. First you have an update in the left table, where the coins http://www.zergpool.com/site/mining, I look at the Profit column, it takes a little time. Further, after some time, the data in the right table changes - the current estimate. And only in 15-30-45 seconds (sometimes longer) the data on the general API is updated (http://api.zergpool.com:8080/api/status). For me (NH) a very big update delay. Update the data everywhere at once or first here http://api.zergpool.com:8080/api/status.
Thank you, royal wishes.
Hi,
Have reduced time between API refresh by 10 sec
Hi,
I'm fine with time. The data on your site is slowly updated here - http://api.zergpool.com:8080/api/status
The delay from real data is more than 30 seconds, sometimes more than 1-3 minutes.
Give email. I'll send you a screen with notes. Here the picture is not attached.
Hey. I tried to connect NH by API. Everything is very bad, your API works with delays, sometimes freezes for a long time, lost 0.07 btc.
Will there be changes?
Will there be changes?
Hi,
Can you give some more details, so we can improve? Like what algo or coin you tried
pinpin
I am primarily interested in data from here - http://api.zergpool.com:8080/api/status, but they are updated with a delay. First you have an update in the left table, where the coins http://www.zergpool.com/site/mining, I look at the Profit column, it takes a little time. Further, after some time, the data in the right table changes - the current estimate. And only in 15-30-45 seconds (sometimes longer) the data on the general API is updated (http://api.zergpool.com:8080/api/status). For me (NH) a very big update delay. Update the data everywhere at once or first here http://api.zergpool.com:8080/api/status.
Thank you, royal wishes.
Hi,
Have reduced time between API refresh by 10 sec
Hi,
I'm fine with time. The data on your site is slowly updated here - http://api.zergpool.com:8080/api/status
The delay from real data is more than 30 seconds, sometimes more than 1-3 minutes.
Give email. I'll send you a screen with notes. Here the picture is not attached.
February 14, 2019, 02:24:50 PM
i have also noticed that in miner per coin it shows something like 1.4 Mh/s shared mode and 50.6 Mh/s solo mode on various algorythms while you can see that 3 miners that i run all use c=btc,m=solo it shows that i have shares in shared mode while i have shared configured only for progpow.
https://imgur.com/Rs7Vjvz
https://imgur.com/Rs7Vjvz
Jump to: