🚀[ANN][PoSToken]First PoS Smart Contract Token[Lending Platform Available] - page 214.

seyola89

full member

Activity: 518

Merit: 102

Quote from: maxwell1 on November 05, 2017, 12:47:24 PM

Quote from: seyola89 on October 31, 2017, 06:54:22 AM

Quote from: POSToken on October 30, 2017, 08:21:57 AM

Hi community,

First of all, thank you so much for your kind support! Now we're busy on distributing the airdropped POS to all participants, it seems that we still need one day to finish distribution. So if you didn't received your POS, please just be patient. More information and update will come out after we finish the distribution, stay tuned and thank you again!

Best Regards,
PoSToken Dev Team.

Welldone for the hard work you put into this airdrop. Got mine already. Staking all the way

For those that are still asking on how to mint or claim your staked coins, you can watch these detailed video tutorials below:

Video 1:
https://youtu.be/GsaHp2qnZMQ

Video 2:
https://youtu.be/XycU63XPrjk

Just used this video on youtube to mint pos token. It was very comprehensive.

Good to see that my videos were helpful for you. THANKS for watching..

seyola89

full member

Activity: 518

Merit: 102

Quote from: goku19 on November 05, 2017, 09:16:57 AM

Now waiting for the last round of the airdrop which will be only for the pos token holders... and I am one of them... I have not moved even a single pos token since the 1st airdrop.. and will not till it reaches 10USD.. yes I believe in it..will start minting after that

Why should you wait till 10usd price before you start minting. It's better you start minting now and accumulate as much POS as you can.

Quote from: teosanru on November 05, 2017, 10:28:19 AM

A question when you have done the staking, do you have to have eth in your wallet? if the answer is yes, how much eth have you used in your wallet to be able to bet?

Yea you must have ethereum in your wallet to be able to mint. Minting fees can be as low as $0.02 (2 cents).
I am surprised to see people using 20 cents plus to mint just once. I would use that to mint 6 to 10 times!!

monsterfinger

jr. member

Activity: 44

Merit: 1

Quote from: LaLegiste on November 05, 2017, 03:16:40 PM

Quote from: Leass on November 05, 2017, 02:26:24 PM

Quote from: Dfinest on November 05, 2017, 01:20:57 PM

Quote

The remaining tokens from the airdrop will be distributed to all token holders.

So if i got a small amount of tokens (15) in the airdrop and i hold this amount since the beginning, then i will get some from the remaining tokens?

Prob, yea, however it depends on DEV choice if there'd be any holdings limit.

it seems the announcement about distribution will take place next week according to telegram group. so we'll find out all the details very soon.

My update is Atm is no holding limit, all tokens from bounty and airdrop will distributed to tokensholder, depending in the amount of stake. More PoS= more distribution. You can buy on ED to increase your stake. Not necessary to hold PoS since airdrop#1.

greets from Telegram

seyola89

full member

Activity: 518

Merit: 102

Quote from: POSToken on October 31, 2017, 11:36:08 AM

Hi community,

We finished the distribution of our 3rd round airdrop. Thanks so much for your patience and continued support. You can view the distribution list here:https://postoken.org/3rd_round_airdrop_result.txt.

About the trading bounty, please be patient, we will get the trades of EtherDelta from Block #4278400 to Block #4464360 on Ethereum Network, so if you bought some POS before the deadline(October 31th, 2017 at 15:00 UTC), you won't lose your bounty. We just need a little more time to update the bounty list. Thank you!

Best Regards,
PoSToken Dev Team.

Thanks dev for the airdrop. I got mine. I am also very glad to be one of the 5 people that received the special bounty pos.

Quote from: Postlegend on October 31, 2017, 10:41:03 PM

Wait...what is the exact procedure for mining PoSToken? Isn't it very different from mining other coins? It would be very helpful if someone could send me a guide, as this coin seems very profitable. Sorry if I have missed any posts regarding PoS mining.

Check these detailed video tutorials on how to mine postokens.
Video 1:
https://youtu.be/GsaHp2qnZMQ
Video 2:
https://youtu.be/XycU63XPrjk

Quote from: (-_-)$$$$@ll_day on November 01, 2017, 05:24:54 PM

I minted for the first time since buying my load of POSTokens on 10/01/2017.

Just minted 72 POSTokens Grin

You won't see my POSTokens on any exchange until I see it over $40USD/POSToken

I actually see these tokens as better than BitConnect, HextraCoin, WesternCoin, RegalCoin and others because no one can hold your money, LOL!!!!!

Great job Dev Team, I hope this goes to the moon and yes, I am buying the dip!!!!

Peace Out!!!

Wow you have held for over 30 days and have mined 72 pos!! That's great. You just received your monthly salary for working for nobody.... Hahaha...

Quote from: Vigme86 on November 02, 2017, 03:36:40 PM

Thank you very much for your answers ! Wink

Just a question I have my POS on a Metamask wallet I can't use mint function on it but if I transfer my POS on another ETH wallet
on myetherwallet I lose my coinage Undecided

what do you guys suggest ?

You can import your metamask wallet private keys into myetherwallet and carry out mint process. If you send your coins out of your wallet, your coinage will be reset to zero(0)

Quote from: Leass on November 03, 2017, 07:55:50 AM

Guys since it's 0 to 0 transfer it holds nearly 0 information thus confirm always gonna be instant. If You want to instantly update your balance after mintning go to https://etherscan.io/address/0xee609fe292128cad03b786dbb9bc2634ccdbe7fc#readContract -> Put your address in 7. balanceof and press Query.
It'd get updated then instantly.-

Good Info bro. I will try this in my next pos claim

LaLegiste

full member

Activity: 434

Merit: 100

https://eloncity.io/

Quote from: Leass on November 05, 2017, 02:26:24 PM

Quote from: Dfinest on November 05, 2017, 01:20:57 PM

Quote

The remaining tokens from the airdrop will be distributed to all token holders.

So if i got a small amount of tokens (15) in the airdrop and i hold this amount since the beginning, then i will get some from the remaining tokens?

Prob, yea, however it depends on DEV choice if there'd be any holdings limit.

it seems the announcement about distribution will take place next week according to telegram group. so we'll find out all the details very soon.

Leass

full member

Activity: 182

Merit: 100

Quote from: Dfinest on November 05, 2017, 01:20:57 PM

Quote

The remaining tokens from the airdrop will be distributed to all token holders.

So if i got a small amount of tokens (15) in the airdrop and i hold this amount since the beginning, then i will get some from the remaining tokens?

Prob, yea, however it depends on DEV choice if there'd be any holdings limit.

Dfinest

full member

Activity: 461

Merit: 101

Quote

The remaining tokens from the airdrop will be distributed to all token holders.

So if i got a small amount of tokens (15) in the airdrop and i hold this amount since the beginning, then i will get some from the remaining tokens?

D3legacy

full member

Activity: 178

Merit: 100

It always worked for me with 0,1 Gwei but you usually need to wait for about 15-30 minutes until the transaction appears

i tried it on myetherwallet transactions on Minting and also on Etherdelta transactions so its a great way to lower your fees.

Leass

full member

Activity: 182

Merit: 100

Quote from: Leass on November 02, 2017, 07:47:45 PM

As I said, I tried sending 0 POS with 0.1 GWEI price - working perfectly Wink

Proof: https://etherscan.io/tx/0x00d635f4501bdc97384583d6469f5f611fb0a6c6683f6cfe9c254044ac323ad1
For anyone still having any issues.
Import Your wallet to MEW (https://www.myetherwallet.com/ - by UTC/Priv Keys/etc - ALWAYS make sure it's original one by checking SSL certificate) by clicking "Send Ether & Tokens" -> Click Load Tokens-> For recipient address type same address you are sending from-> For Amount type 0 and choose POS-> Leave Gas Limit as it is-> In upper right corner click on Gas Price: XX GWEI, use slider to specify 0.1 GWEI price-> Click Generate Transaction -> Click Send transaction -> ENJOY
You can send tips to my address specified at tx - POS highly appreciated Cheesy

Quote from: Yey09 on November 05, 2017, 01:07:03 PM

Quote from: Leass on November 01, 2017, 06:30:30 PM

Quote from: amacar1 on November 01, 2017, 05:38:25 PM

Yeah I found the problem, in first transaction I used too low gas and was rejected, so I didnt get coins, but pos state reset. So when I tried again there were nothing to mint. Will know for the next time.

~snip~

Tried the 0.1 GWEI... Transaction not found LOL! Grin

Tried it again with 0.6 GWEi and it works

Well for me it worked with 0.1 GWEI price, saw someone using even less (like 0.03GWEI), so I'm not sure why TX was not found.

Yey09

sr. member

Activity: 632

Merit: 250

http://scientificcoin.com/

Quote from: Leass on November 01, 2017, 06:30:30 PM

Quote from: amacar1 on November 01, 2017, 05:38:25 PM

Yeah I found the problem, in first transaction I used too low gas and was rejected, so I didnt get coins, but pos state reset. So when I tried again there were nothing to mint. Will know for the next time.

Don't call mint function. You're robbing Yourself and Your transaction can be rejected because of low gas. Instead just send 0 (Yeah ZERO) POS from YOUR WALLET to YOUR WALLET(same one). Leave gas limit as it appears but lower gas price to whatever you feel like (assuming You are using MEW). Here is my tx with 0.6 Gwei price: https://etherscan.io/tx/0x514c52af4d7ae22200dd7c6fd5a34eeeb774f09302a70fe1235bc15c790a050f
I think it's possible to even send it with 0.1 GWEI (will try in 1 day).
Also Your balance will update in Etherscan after some period (check after ~15-30 mins), it's not immediate.

Tried the 0.1 GWEI... Transaction not found LOL! Grin

Tried it again with 0.6 GWEi and it works

maxwell1

newbie

Activity: 42

Merit: 0

Quote from: seyola89 on October 31, 2017, 06:54:22 AM

Quote from: POSToken on October 30, 2017, 08:21:57 AM

Hi community,

First of all, thank you so much for your kind support! Now we're busy on distributing the airdropped POS to all participants, it seems that we still need one day to finish distribution. So if you didn't received your POS, please just be patient. More information and update will come out after we finish the distribution, stay tuned and thank you again!

Best Regards,
PoSToken Dev Team.

Welldone for the hard work you put into this airdrop. Got mine already. Staking all the way

For those that are still asking on how to mint or claim your staked coins, you can watch these detailed video tutorials below:

Video 1:
https://youtu.be/GsaHp2qnZMQ

Video 2:
https://youtu.be/XycU63XPrjk

Just used this video on youtube to mint pos token. It was very comprehensive.

Gabz999

full member

Activity: 266

Merit: 107

Quote from: Sevaev on November 05, 2017, 11:59:06 AM

The signature on the bounty has ended or there will be another round?

Its already ended sir. There are no rounds of airdrop again and you can free to remove your signature now. The remaining tokens from the airdrop will be distributed to all token holders.

Vegan97

full member

Activity: 378

Merit: 100

Short BTC at: https://www.bitmex.com/register/spz2

Those bots on CE are really annoying.

Sevaev

full member

Activity: 406

Merit: 132

The signature on the bounty has ended or there will be another round?

Yey09

sr. member

Activity: 632

Merit: 250

http://scientificcoin.com/

Quote from: teosanru on November 05, 2017, 10:28:19 AM

Quote from: Yey09 on November 05, 2017, 05:57:19 AM

Quote from: Yey09 on November 02, 2017, 12:50:20 PM

just started Staking
https://etherscan.io/tx/0x6f3e89050b64517032758cea1ce57c2c33d8a0f5c17417e4f8ea50da32791e57

From 42 POS it went up to 43.776301369863013698 POS, minting works but now why my Coinage went to zero? Do I need to do the process of minting again?

A question when you have done the staking, do you have to have eth in your wallet? if the answer is yes, how much eth have you used in your wallet to be able to bet?

I followed what the tutorial suggested of 200000 gas. Actual eth used 0.001274385 Ether ($0.38) You can click on the transaction link to see more details of the transaction.

teosanru

hero member

Activity: 2114

Merit: 619

Quote from: Yey09 on November 05, 2017, 05:57:19 AM

Quote from: Yey09 on November 02, 2017, 12:50:20 PM

just started Staking
https://etherscan.io/tx/0x6f3e89050b64517032758cea1ce57c2c33d8a0f5c17417e4f8ea50da32791e57

From 42 POS it went up to 43.776301369863013698 POS, minting works but now why my Coinage went to zero? Do I need to do the process of minting again?

A question when you have done the staking, do you have to have eth in your wallet? if the answer is yes, how much eth have you used in your wallet to be able to bet?

teosanru

hero member

Activity: 2114

Merit: 619

Quote from: hiramofTyre on November 05, 2017, 06:14:28 AM

I didn't know there will still be another airdrop? Anyway when will it happen?

There will not be another airdrop, simply the Dev said that they will distribute the remaining tokens among the people who kept their coins during the 2 previous airdrops, that means they verified the amount of coins that were delivered to them in the airdrop and if they sold them or not
that's for the cheats that sold and want to buy to get more tokens than what they have retained without selling

libert19

hero member

Activity: 2520

Merit: 952

Quote from: RJX on November 05, 2017, 09:42:42 AM

I don't know if I done it right. I made the transaction with 200000 gas and after clicking 'generate' , I saw the bottom part of that window pop 'out & in' and after that nothing happens, no confirmation, no error.

So i don't know if I done it right. Don't know if I need to do it again or wait. Can someone confirm this is normal or otherwise comment on this?

Thank you.

EDIT: I don't see a transaction on etherscan so I guess it failed?

May be transaction never happened, if it had then etherscan would show some error like "transaction out of gas" or some other.

Edit: okay

RJX

legendary

Activity: 1078

Merit: 1003

I don't know if I done it right. I made the transaction with 200000 gas and after clicking 'generate' , I saw the bottom part of that window pop 'out & in' and after that nothing happens, no confirmation, no error.

So i don't know if I done it right. Don't know if I need to do it again or wait. Can someone confirm this is normal or otherwise comment on this?

Thank you.

EDIT: I don't see a transaction on etherscan so I guess it failed?

EDIT 2: nevermind, i 'screenshat' the popping window and it was in fact the button to confirm, don't know why it did that. but transaction generated!

Yey09

sr. member

Activity: 632

Merit: 250

http://scientificcoin.com/

Quote from: farmerandmore on November 05, 2017, 08:33:25 AM

Quote from: Yey09 on November 05, 2017, 05:57:19 AM

Quote from: Yey09 on November 02, 2017, 12:50:20 PM

just started Staking
https://etherscan.io/tx/0x6f3e89050b64517032758cea1ce57c2c33d8a0f5c17417e4f8ea50da32791e57

From 42 POS it went up to 43.776301369863013698 POS, minting works but now why my Coinage went to zero? Do I need to do the process of minting again?

Everytime you do minting, your coinage will be reset 0. You have to wait 3 more days, re-check your coinage in calculator, and do it again.

It's likely claim your stake every 3 days Grin

Quote from: mainconcept on November 05, 2017, 06:28:10 AM

Quote from: Yey09 on November 05, 2017, 05:57:19 AM

Quote from: Yey09 on November 02, 2017, 12:50:20 PM

just started Staking
https://etherscan.io/tx/0x6f3e89050b64517032758cea1ce57c2c33d8a0f5c17417e4f8ea50da32791e57

From 42 POS it went up to 43.776301369863013698 POS, minting works but now why my Coinage went to zero? Do I need to do the process of minting again?

That is normal, every time you mint your POStoken the coinage resets to zero. Then you have to wait 3 days, then you can mint again.

I see, Thanks Guys!

Topic: 🚀[ANN][PoSToken]First PoS Smart Contract Token[Lending Platform Available] - page 214. (Read 348494 times)