🚀[ANN][PoSToken]First PoS Smart Contract Token[Lending Platform Available] - page 223.

ishinn99

member

Activity: 420

Merit: 11

BitHostCoin.io

Quote from: monsterfinger on November 02, 2017, 05:54:51 AM

Quote from: ansi on November 02, 2017, 05:28:18 AM

Quote from: Leass on November 01, 2017, 06:30:30 PM

Quote from: amacar1 on November 01, 2017, 05:38:25 PM

Yeah I found the problem, in first transaction I used too low gas and was rejected, so I didnt get coins, but pos state reset. So when I tried again there were nothing to mint. Will know for the next time.

Don't call mint function. You're robbing Yourself and Your transaction can be rejected because of low gas. Instead just send 0 (Yeah ZERO) POS from YOUR WALLET to YOUR WALLET(same one). Leave gas limit as it appears but lower gas price to whatever you feel like (assuming You are using MEW). Here is my tx with 0.6 Gwei price: https://etherscan.io/tx/0x514c52af4d7ae22200dd7c6fd5a34eeeb774f09302a70fe1235bc15c790a050f
I think it's possible to even send it with 0.1 GWEI (will try in 1 day).
Also Your balance will update in Etherscan after some period (check after ~15-30 mins), it's not immediate.

I can confirm that you're my man, used the same thing you just mentioned & was updated in like 7 minutes only.
Used 0.7 GEWI only & was resolved in couple minutes (like 5 minutes) than 2 minutes later i got my Minted PoS (just like the calculator said.

Thank you man you're great, you should contact PoS token Dev to add this Mint Guide to his OP.

so only *send* 0 pos to myself and i mint automatically ?

I will try to this. Have you tried lowering your gwei up to 0.1? Does anyone tried it? I have postoken and I will try this instructions posted above.
You really help us with the txn fees

Landak

hero member

Activity: 1386

Merit: 503

Quote from: POSToken on November 01, 2017, 11:21:18 AM

-snip-
About Exchange
We will be listed on CoinExchange at the middle of Nov.

Woohoo~~ good news, i thought it will be listed on HitBtc but CoinExchange it's also nice. This better than use ED too much use fee depo/trade/withdraw, thanks for the new updates

spreewel

member

Activity: 101

Merit: 10

If I buy 10 POS now and add to existing one, will this reset my counter for coin age?

lovenlifelarge

hero member

Activity: 676

Merit: 501

wonderful update devs. now people are more aware that POS is now changing the game of staking. Some are copycats but the first and original POS is here. We will patiently wait for more good news!

monsterfinger

jr. member

Activity: 44

Merit: 1

Quote from: rannovan on November 02, 2017, 06:37:45 AM

if mining use method send to own wallet
still must waiting coinage
it mean still must waiting 3 days?
why after 3 days my coinage still 0?

in *select a funtion* is no send or do you mean transfer ?

wojteks102

sr. member

Activity: 616

Merit: 251

Everybody talking about the possible price of POSToken 4-5$, 10$ or even 50$ have to consider that there are only two points that have to be done to achieve this price - active community and obviously dev team pushing forward the project. I suggest making a roadmap with more details to interest more people who can possibly invest or get into our community

rannovan

sr. member

Activity: 304

Merit: 251

if mining use method send to own wallet
still must waiting coinage
it mean still must waiting 3 days?
why after 3 days my coinage still 0?

monsterfinger

jr. member

Activity: 44

Merit: 1

Quote from: ansi on November 02, 2017, 05:28:18 AM

Quote from: Leass on November 01, 2017, 06:30:30 PM

Quote from: amacar1 on November 01, 2017, 05:38:25 PM

Yeah I found the problem, in first transaction I used too low gas and was rejected, so I didnt get coins, but pos state reset. So when I tried again there were nothing to mint. Will know for the next time.

Don't call mint function. You're robbing Yourself and Your transaction can be rejected because of low gas. Instead just send 0 (Yeah ZERO) POS from YOUR WALLET to YOUR WALLET(same one). Leave gas limit as it appears but lower gas price to whatever you feel like (assuming You are using MEW). Here is my tx with 0.6 Gwei price: https://etherscan.io/tx/0x514c52af4d7ae22200dd7c6fd5a34eeeb774f09302a70fe1235bc15c790a050f
I think it's possible to even send it with 0.1 GWEI (will try in 1 day).
Also Your balance will update in Etherscan after some period (check after ~15-30 mins), it's not immediate.

I can confirm that you're my man, used the same thing you just mentioned & was updated in like 7 minutes only.
Used 0.7 GEWI only & was resolved in couple minutes (like 5 minutes) than 2 minutes later i got my Minted PoS (just like the calculator said.

Thank you man you're great, you should contact PoS token Dev to add this Mint Guide to his OP.

so only *send* 0 pos to myself and i mint automatically ?

ansi

sr. member

Activity: 882

Merit: 254

Quote from: Leass on November 01, 2017, 06:30:30 PM

Quote from: amacar1 on November 01, 2017, 05:38:25 PM

Yeah I found the problem, in first transaction I used too low gas and was rejected, so I didnt get coins, but pos state reset. So when I tried again there were nothing to mint. Will know for the next time.

Don't call mint function. You're robbing Yourself and Your transaction can be rejected because of low gas. Instead just send 0 (Yeah ZERO) POS from YOUR WALLET to YOUR WALLET(same one). Leave gas limit as it appears but lower gas price to whatever you feel like (assuming You are using MEW). Here is my tx with 0.6 Gwei price: https://etherscan.io/tx/0x514c52af4d7ae22200dd7c6fd5a34eeeb774f09302a70fe1235bc15c790a050f
I think it's possible to even send it with 0.1 GWEI (will try in 1 day).
Also Your balance will update in Etherscan after some period (check after ~15-30 mins), it's not immediate.

I can confirm that you're my man, used the same thing you just mentioned & was updated in like 7 minutes only.
Used 0.7 GEWI only & was resolved in couple minutes (like 5 minutes) than 2 minutes later i got my Minted PoS (just like the calculator said.

Thank you man you're great, you should contact PoS token Dev to add this Mint Guide to his OP.

ansi

sr. member

Activity: 882

Merit: 254

Quote from: POSToken on November 01, 2017, 11:21:18 AM

Hi community,

About Trading Bounty:
We have already sent trading bounty to all buyers, Congratulations! Here is the final reward list of trading bounty:https://postoken.org/3rd_round_trading_bounty_result.txt.

About Future Distribution
All the remaining tokens (currently 130,449 POS), will be distributed to token holders proportional to the number of tokens they hold. Rules will be updated in a week.

About Exchange
We will be listed on CoinExchange at the middle of Nov.

About Roadmap
Our wallet and token creation service are under development, will be released in early December or late November.

Best Regards,
PoSToken Dev Team.

That's great news man, can't wait to see those tokens into my MEW soon

ferry168

full member

Activity: 266

Merit: 150

SWISSREALCOIN - FIRST REAL ESTATE CRYPTO TOKEN

Quote from: Leass on November 01, 2017, 06:30:30 PM

Quote from: amacar1 on November 01, 2017, 05:38:25 PM

Yeah I found the problem, in first transaction I used too low gas and was rejected, so I didnt get coins, but pos state reset. So when I tried again there were nothing to mint. Will know for the next time.

Don't call mint function. You're robbing Yourself and Your transaction can be rejected because of low gas. Instead just send 0 (Yeah ZERO) POS from YOUR WALLET to YOUR WALLET(same one). Leave gas limit as it appears but lower gas price to whatever you feel like (assuming You are using MEW). Here is my tx with 0.6 Gwei price: https://etherscan.io/tx/0x514c52af4d7ae22200dd7c6fd5a34eeeb774f09302a70fe1235bc15c790a050f
I think it's possible to even send it with 0.1 GWEI (will try in 1 day).
Also Your balance will update in Etherscan after some period (check after ~15-30 mins), it's not immediate.

hi.. how is the result of your mining? can you share with us the right way to mining ?
thanks

ferry168

full member

Activity: 266

Merit: 150

SWISSREALCOIN - FIRST REAL ESTATE CRYPTO TOKEN

Quote from: ferry168 on November 01, 2017, 09:35:15 PM

hi dev, i have 40 tokens and the coinage if i see in MEW is 3 days 8 hour (when i write this). i want to trying mining this token. but when i use pos token calculator the result still 0. do i have to keep longer for do the mining in MEW ? or can give me an advice what should i do if i want do the mining ?

thanks

now its work in postoken calculator. i will try to mining it. thanks dev

npredtorch

legendary

Activity: 1246

Merit: 1049

Quote from: (-_-)$$$$@ll_day on November 01, 2017, 05:24:54 PM

I minted for the first time since buying my load of POSTokens on 10/01/2017.

Just minted 72 POSTokens Grin

You won't see my POSTokens on any exchange until I see it over $40USD/POSToken

I actually see these tokens as better than BitConnect, HextraCoin, WesternCoin, RegalCoin and others because no one can hold your money, LOL!!!!!

Great job Dev Team, I hope this goes to the moon and yes, I am buying the dip!!!!

Peace Out!!!

That's a really high price prediction for PoSTokens

$40 dollar each will make HODLers rich in no time.
I just hope that it increases in conjunction to ETH price so there's better chances that your target sell out will come true.

Well, if I am buying at 0.041 ETH last time, why shouldn't I stop today considering it's very low at 0.00285101.
I guess it's the best time to buy since many participants from the last airdrop are dumping their tokens right now.

saverik

newbie

Activity: 43

Merit: 0

Great update dev.

freedos

member

Activity: 294

Merit: 10

life is hard, dont make it more harder

Quote from: newinbtc on November 01, 2017, 09:30:32 PM

Quote from: nankers on November 01, 2017, 01:37:18 PM

I am a newbie in terms of mining. I want to ask if the results in mining every day will go into our wallet every day anyway or every week?im need explain about that sir..thanks ^^

mint every 3 Days
Before mint check at this website - https://calculator.postoken.org/ If it showing 0000 Then do not min , IF showing some value The mint every 3 Days

In first mint i received 0.50 POS Tokens for holding 77 Tokens only

Thanks for the information so its every3 day

ranman09

full member

Activity: 756

Merit: 112

Quote from: libert19 on November 01, 2017, 05:16:32 AM

Quote from: ranman09 on November 01, 2017, 04:27:54 AM

Quote from: libert19 on November 01, 2017, 12:13:01 AM

Quote from: ranman09 on October 31, 2017, 11:10:47 PM

Quote from: libert19 on October 31, 2017, 10:32:25 PM

Quote from: kabukabu on October 31, 2017, 10:11:55 PM

I know I can mine by using mint()function.
I'd like to try anothoer method to trigger PoS mining.
Can I mine by sending enough aged Postokens to my other ETH address ?

Nope. Mining can only be done by sending small amount of PoS to your own address or by interacting with contract .

Hi i cant seem to understand. I sent postokens to another address will it mine itself? Or i will need to interact with the contract?

No. You need to send token to your OWN address. Please read my above reply.

Interacting with a contract is just another way to mine.

Hi thank you much for your reply. By the word OWN you mean, the same address that has the POStoken in the first place? You mean make a send transaction from the address to the same address?

Exactly.

Thank you!

zefirka

full member

Activity: 308

Merit: 100

Quote from: libert19 on November 01, 2017, 10:27:01 AM

Quote from: zefirka on November 01, 2017, 09:50:07 AM

Quote from: POSToken on September 17, 2017, 11:25:12 AM

Step-by-Step Tutorial to PoSToken PoS Mining - Fast & Easy

not work - EXPECTED REWARD 0.00000000 POS

"not work" is wrong statement it just means you have to wait a bit more before minting - min is 3 days.

thanks i be wait

saugwurm

hero member

Activity: 1061

Merit: 551

Quote from: xfunk on November 02, 2017, 02:13:09 AM

Dev, please explain about the new wallet: Why POS token need it? It's ERC20 now, is there any swap on the road, or whats the point?

Maybe a wallet which do the minting process fully automatic. Wink

xfunk

full member

Activity: 174

Merit: 102

Dev, please explain about the new wallet: Why POS token need it? It's ERC20 now, is there any swap on the road, or whats the point?

ataki

full member

Activity: 602

Merit: 100

Quote from: libert19 on November 01, 2017, 09:31:56 PM

Quote from: Vigme86 on November 01, 2017, 01:23:29 PM

Hi guys a couple of question,

POS Token reward need to be on POS Wallet or on an ETH Wallet?
I've read on a post you need gas fees to make a transaction, what is it ? ETH?

Ethereum wallet, I use myetherwallet. PoS wallet is in developement. Gas basically means transaction fees so you need some ethereum in your wallet to make transaction.

I use myetherwallet. Its working perect for POS.

Topic: 🚀[ANN][PoSToken]First PoS Smart Contract Token[Lending Platform Available] - page 223. (Read 348488 times)