Why would you make the logo with red if it's to print on small labels.
black labels can be printed with simple, cheap and efficient label printers.
Adding 2 stripes or red will require a much higher production cost.
Topic: [ANN][QUIT] Quit Dough, Real Products (e-cigs) +Multi-Vendor Vape Site - page 24. (Read 61420 times)
January 29, 2015, 10:35:38 AM
January 29, 2015, 06:14:09 AM
BTW,
some more logo's:
some more logo's:
January 29, 2015, 05:50:06 AM
January 29, 2015, 05:39:48 AM
Guys, don't bother with btcpool exchange, big cashout fee! 0.001BTC
That is just not acceptable, cost me 20% fee to withdraw!
That is just not acceptable, cost me 20% fee to withdraw!
Hi just looked and its the same as cryptys WD Fee: 0.00100000 BTC
January 29, 2015, 12:51:13 AM
Ok So it looks like 2 is in the lead and added some red to the e-cig as requested, this would be an example of the e-liquid bottle for print
The reason we keep it simple is logos need to go an small items and also the more colour the more cost to print and for print setup.
What you guys think?
The reason we keep it simple is logos need to go an small items and also the more colour the more cost to print and for print setup.
What you guys think?
January 28, 2015, 08:25:21 PM
Don't like it myself but a variant on the design.
Once we have one singled out the best design then we do a test print run and put them on the products, have them filmed and professional pictures taken to see the end result.
So keep the votes and idea coming the faster we agree on the simple small designs that will be used on small products like e-cig batteries then we can roll along and get the list of others things done to get the site up and running.
Keep some pressure on bittrex if you have time with an email or tweet to push for the next exchange.
Cheers Matt
Once we have one singled out the best design then we do a test print run and put them on the products, have them filmed and professional pictures taken to see the end result.
So keep the votes and idea coming the faster we agree on the simple small designs that will be used on small products like e-cig batteries then we can roll along and get the list of others things done to get the site up and running.
Keep some pressure on bittrex if you have time with an email or tweet to push for the next exchange.
Cheers Matt
January 28, 2015, 07:49:37 PM
Number 2, Number 2!!
Loved it the minute it was made, looks like a lil' face with the L as the nose, and the tip of the Q looks a bit like an e-cig in the mouth. Would look great on e-cig batteries too
I admit, I am a bit biased though
Loved it the minute it was made, looks like a lil' face with the L as the nose, and the tip of the Q looks a bit like an e-cig in the mouth. Would look great on e-cig batteries too
I admit, I am a bit biased though
oic nice make the cig tip red and add smoke
So remember this logo is for products that will be branded and sold on the multi-vendor site, its not QUIT DOUGH coin logo, coin be the same as it is.
January 28, 2015, 07:32:52 PM
Love this! Nice and simple, but stylish. I am guessing you must have a marketing background
January 28, 2015, 07:32:48 PM
Number 2, Number 2!!
Loved it the minute it was made, looks like a lil' face with the L as the nose, and the tip of the Q looks a bit like an e-cig in the mouth. Would look great on e-cig batteries too
I admit, I am a bit biased though
Loved it the minute it was made, looks like a lil' face with the L as the nose, and the tip of the Q looks a bit like an e-cig in the mouth. Would look great on e-cig batteries too
I admit, I am a bit biased though
oic nice make the cig tip red and add smoke
January 28, 2015, 07:19:34 PM
Number 2, Number 2!!
Loved it the minute it was made, looks like a lil' face with the L as the nose, and the tip of the Q looks a bit like an e-cig in the mouth. Would look great on e-cig batteries too
I admit, I am a bit biased though
Loved it the minute it was made, looks like a lil' face with the L as the nose, and the tip of the Q looks a bit like an e-cig in the mouth. Would look great on e-cig batteries too
I admit, I am a bit biased though
January 28, 2015, 07:18:58 PM
Not Bad bit
And don't be shy guys, even rough ideas are fine as the graphics can be done from a rough design, they can be redone to print quality by the team
Cheers Matt
January 28, 2015, 07:12:04 PM
January 28, 2015, 07:09:25 PM
#1 for sure, but if you could put a little color on the end of the cig, that would be cool.
January 28, 2015, 07:07:13 PM
i like the red q maybe have some smoke come off it
January 28, 2015, 06:44:31 PM
The team has been going over designs for Branding with the Legit Quit name, some feedback would be good, which one of the short logos looks best, we are going for simple as the printing area on many products is small so sometimes a short logo is needed over the longer name logo. So what one takes your eye 1 or 2?
This is an example of the name printed on an eliquid bottle
Cheers Matt
This is an example of the name printed on an eliquid bottle
Cheers Matt
Or i can put up a bounty of 500 for the best design from the community
Remember this is for printing on small objects like electronic cigarettes as the larger Legit quit will be used on larger items like bottles and packaging
Cheers Matt
January 28, 2015, 05:49:00 PM
Looks like, logo of some employee agency
Looks a little bit like the logo op HP compaq...
January 28, 2015, 05:44:12 PM
Hmmm... hard to say let community vote or give a nice bounty for a good design, different tastes, different results
let community vote or give a nice bounty for a good design, different tastes, different results January 28, 2015, 05:30:50 PM
Looks like, logo of some employee agency
Don't know that company myself they not in my country, but what do you think bitspender 1 or 2?
This is an example of the name printed on an eliquid bottle
Cheers Matt
January 28, 2015, 05:24:22 PM
Looks like, logo of some employee agency
January 28, 2015, 05:00:36 PM
The team has been going over designs for Branding with the Legit Quit name, some feedback would be good, which one of the short logos looks best, we are going for simple as the printing area on many products is small so sometimes a short logo is needed over the longer name logo. So what one takes your eye 1 or 2?
This is an example of the name printed on an eliquid bottle
Cheers Matt
This is an example of the name printed on an eliquid bottle
Cheers Matt
Jump to: