Pages:
Author

Topic: [ANN][UNIC] Unicoin LAUNCHED! - page 19. (Read 70214 times)

legendary
Activity: 868
Merit: 1000
January 01, 2014, 01:50:17 AM
OP please update the thread, people need to be informed of the information if the coin has any chance of being a success.

Pool: http://unic.altminers.com/
(Not confirmed to be paying out)

Window's Wallet: 
Code:
https://mega.co.nz/#!z1wUBJAC!GILB1BjQ6dnT-WBeOLCwsmofEYpmpDSLlbqBCGHlRaU

Not compiled a linux or mac wallet, let me know if you want one.

Donations accepted.


member
Activity: 70
Merit: 10
January 01, 2014, 01:44:47 AM
Hmmm when does the pool pay out?
Come on someone, find a block!
newbie
Activity: 37
Merit: 0
January 01, 2014, 01:44:07 AM
Yep i can't install on linux either Sad

Code:
make -f makefile.unix
g++ -c -O2 -pthread -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -D_FILE_OFFSET_BITS=64 -I/home/cshelswell/Documents/unicoin/src -I/home/cshelswell/Documents/unicoin/src/obj -DUSE_UPNP=0 -DUSE_IPV6=1 -I/home/cshelswell/Documents/unicoin/src/leveldb/include -I/home/cshelswell/Documents/unicoin/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2  -MMD -MF obj/alert.d -o obj/alert.o alert.cpp
alert.cpp:263:1: fatal error: opening dependency file obj/alert.d: No such file or directory
compilation terminated.
make: *** [obj/alert.o] Error 1

No problem installing any other wallets so I assume i have the dependencies?

Any help would be great cheers Smiley

Its not you, the code for this wallet is utter rubbish. For some reason you have to create the obj directory in the src dir manually. NFI how you will get on after that, I never managed to get the console wallet built. I got the QT one working fine by manually editing the LIBS line since it was full of Windows BS after the qmake unicoin-qt.pro command.

Also same thing here I have never had an issue with any other wallet. This one is just 100% amateur time. Also make sure to add LIBS+="-lleveldb -lmemenv" to your make command so it uses system libs rather than whatever junk the dev threw in there.
member
Activity: 112
Merit: 10
January 01, 2014, 01:43:56 AM
I'm using now cgiminer in verbose mode.

I get "Share above target" when the share is below the target and a "Rejected share (share is above target)" when the share is really above target and should be accepted (ex Diff 58/16).  Huh
sr. member
Activity: 371
Merit: 252
January 01, 2014, 01:40:55 AM
#99
Yeah, never had the --scrypt comment in the first place. Looking forward to the next pool.
newbie
Activity: 37
Merit: 0
January 01, 2014, 01:37:16 AM
#98
Remove the *--scrypt* from your cgminer command line

What? lol

100% rejected here too.
member
Activity: 112
Merit: 10
January 01, 2014, 01:35:56 AM
#97
Remove the *--scrypt* from your cgminer command line

I already haven't that option in the command and it doesn't work.

I copied a small script I succesfully used many times before changing only the pool address and the worker. It doesn't work. I don't know why, but in this case is not my fault.
member
Activity: 70
Merit: 10
January 01, 2014, 01:33:52 AM
#96
I wish I could answer the Raspberry Pi guy.

Anyways...I'm not sure what error you guys are getting, but most of the shares are accepted...hopefully not orphaned though...any way to check?
member
Activity: 112
Merit: 10
January 01, 2014, 01:32:32 AM
#95
Please please please help ! I can't mine.

I'm running the wallet in a Win7 PC and I have a RaspeberryPi with some Block Erupters connected to an USB hub. The PC and the RaspberryPI are on the same network, both connected to a modem-router.
The question is:
What must I write in the .conf file in the PC ?
What should be the parameter -o in cgminer ?

TY in advance for your help.


BUMP
newbie
Activity: 28
Merit: 0
January 01, 2014, 01:32:14 AM
#94
Set up, and turned rig back off, waste of time, all rejects ;/

Same here ! I always get the message "Share above target" but when above target it should be accepted. Am I wrong ? Tonight I'm not able to understand anymore.
 

yep, all above target for me too.
Remove the *--scrypt* from your cgminer command line
sr. member
Activity: 371
Merit: 252
January 01, 2014, 01:30:22 AM
#93
Yup, rejects and same above target error.
newbie
Activity: 13
Merit: 0
January 01, 2014, 01:28:56 AM
#92
Donate coins

UitBEDfFdKFYm6zqgoqikjmfiJ77zT6qWV
member
Activity: 112
Merit: 10
January 01, 2014, 01:27:57 AM
#91
So I'm not able to solo mine (maybe my fault), now I'm not able to pool mine ... what to do ? Go to sleep ? Here is 7:30 A.M. !!! Not slept all the night just for mining this coin ... grrrrrrrrrr !!!!

Result: NOTHING AT ALL !!!
full member
Activity: 196
Merit: 100
January 01, 2014, 01:25:45 AM
#90
Set up, and turned rig back off, waste of time, all rejects ;/

Same here ! I always get the message "Share above target" but when above target it should be accepted. Am I wrong ? Tonight I'm not able to understand anymore.
 

yep, all above target for me too.
legendary
Activity: 1820
Merit: 1001
January 01, 2014, 01:25:35 AM
#89
cma to mine moving miner elsewhere for the nigt pool got some funky settin on and cant mine 100% rejected yet theris other mining sounds interesting
member
Activity: 112
Merit: 10
January 01, 2014, 01:25:13 AM
#88
Set up, and turned rig back off, waste of time, all rejects ;/

Same here ! I always get the message "Share above target" but when above target it should be accepted. Am I wrong ? Tonight I'm not able to understand anymore.
 
legendary
Activity: 1358
Merit: 1093
January 01, 2014, 01:23:47 AM
#87
this one is very hard to mine, going to sleep
full member
Activity: 196
Merit: 100
January 01, 2014, 01:22:47 AM
#86
Set up, and turned rig back off, waste of time, all rejects ;/
legendary
Activity: 1820
Merit: 1001
January 01, 2014, 01:18:15 AM
#85
100% rejected shares
member
Activity: 70
Merit: 10
January 01, 2014, 01:16:20 AM
#84
To everyone, the pool seem to work now!

URL: http://unic.altminers.com
Make an account there, create a worker and fill your cgminer configuration file like so:
./cgminer  -o stratum+tcp://unic.altminers.com:5444 -u Weblogin.Worker -p Worker password
I register...and got locked right away...wtf.
Did you get an e-mail to confirm your email? I've seen this problem happening sometimes, 1 miner out of 100
I checked and apparently I did get an email. Used link to confirm and tried logging in. Same problem.

I unlocked your account manually, sorry about that.
Thank you. Much appreciated.
Pages:
Jump to: