Pages:
Author

Topic: [ANN][UNIT] Universal Currency | LIFETIME| POW/POS SHA256 | - page 22. (Read 102344 times)

newbie
Activity: 67
Merit: 0
Can someone explain me how staking works on this coin? I don't found any Information. I'm mining since last week. When does staking start?

https://i.imgur.com/fiopEDc.jpg

Hi mate . Go for the transaction in your wallet and you will find if there is any transaction for staking as mined. I would say it would take a little while for getting your first staking reward . I have a Wallet with 1000+ coins and took me 1 week after I got my first staking reward.
cheers
jr. member
Activity: 96
Merit: 3
Can someone explain me how staking works on this coin? I don't found any Information. I'm mining since last week. When does staking start?

newbie
Activity: 4
Merit: 0
Just mined this coin for 12 hours with one of mine S9's and the rewad 5 coins only???
According to mining calculators I should be making about 20 coins a day, but why so little?

I was using Ispace pool. Does anyone reccomend any other better maybe?

Very excited about this project and want to contribute but if the mining will be like this I am going back to BTC/BCC mining instead...

I have same problem and need better pool Huh

I've been mining on   unit.thecoin.pw   and get about 1 UNIT/hour with my single S9

Hi guys need some help on that pool.
We have a few antminers running on the pool but one disconnects once in a while. We are not sure why
we have 4 x s7 and 1 s9 on it.
The s7 are in variable stratum and s9 on a fixed one. the s7's are the one disconnecting. Would it help if we just put them on on stratum difficulty instead of the variable one?
thank you
newbie
Activity: 4
Merit: 0
As a service to the community, I took a snapshot of the Universal blockchain this morning and uploaded it to Google Drive (you will have to ignore the "whoops" message and click download). Stop universal-qt, put the contents of the 7z file into your %appdata%\universalcurrency folder, and restart it. Should get you to the morning of 1/26/18, around 10 AM. Cuts the 58 hours of CPU time down to about 30 seconds.

Question concerning the wallet

I saw in settings-options there is a spot for optional transaction fees that helps to make sure that transaction are proccessed quickly.
By default it's at 0. but it says that recommended if 5.
What do you guys think here?
Does leaving 0 will make the transaction impossible to do and but the UNIT in danger to be lost in the space or the transaction to take days?
on the other end, is 5 too much?
What do you recommend?

cheers
newbie
Activity: 4
Merit: 0
As a service to the community, I took a snapshot of the Universal blockchain this morning and uploaded it to Google Drive (you will have to ignore the "whoops" message and click download). Stop universal-qt, put the contents of the 7z file into your %appdata%\universalcurrency folder, and restart it. Should get you to the morning of 1/26/18, around 10 AM. Cuts the 58 hours of CPU time down to about 30 seconds.
Hello! Where did you download this blockchain?

I posted earliear about this...basically downloaded the blk0001.dat file from the first post of this thread, then let the wallet sync for 56 hours or so. Once synced, I just compressed the files from %APPDATA%\UniversalCurrency.


Thank you so much, after hours and hours and hours and hours it did cut the time to like 30 min ( did it yesterday so had 2 days only to since
full member
Activity: 260
Merit: 100

Unfortunately, NOMP does not appear to be making payments. The pool did find a block while one additional miner was mining at P8xxx5UmtEyFEfqoCcjeRUy3NAGyMXXxSX, with a hash rate of about 4.5 TH, so I've manually paid 4.5/31.5=0.143 to that address...

Thanks P8xxx5UmtEyFEfqoCcjeRUy3NAGyMXXxSX, whoever you are!

I’m bad at math. Payment should be 5 times the above...will pay the rest when I can.

Had to close the pool. NOMP will not make payments for UNIT, since the daemon does not report transaction details, which NOMP requires to make payments.

P8xxx, I've made the final payment of 3.75 UNIT. Thanks for the help.
hero member
Activity: 1092
Merit: 552
Retired IRCX God
...Something definitely broken there...
Yes, and that "something" is called Iquidus Explorer
#JustSayin
full member
Activity: 260
Merit: 100
anyone else having problems finding transactions/wallets on the main blockchain website?  (https://explorer.u-currency.com/)  I cannot find many recent transactions at all? even after they confirm on my wallet...

Confirmed. It is behaving very oddly--I can look up an address and not see all of the transactions, but when I find the actual block and pull up the txid, then the transaction will show up when I go back to the address.

Something definitely broken there...
sr. member
Activity: 445
Merit: 250
Hello
How to setup S9 for mining UNIT?
For example for hashpool.eu
url, port, password (my wallet?), difficulty?

Is this correct:
URL: pool.hashpool.eu:3333
Worker: MY_UNIT_WALLET
Password: c=UNIT p=??? d=???

Also, how i can see stats for each my S9?

Please explain. Thank You.

You set correctly:
URL: pool.hashpool.eu:3333
Worker: MY_UNIT_WALLET
Password: c=UNIT

You can let pool automatically set difficulty
newbie
Activity: 237
Merit: 0
Hi, how do I get a bonus or is it no longer relevant? http://prntscr.com/i6uuk1
full member
Activity: 260
Merit: 100

Unfortunately, NOMP does not appear to be making payments. The pool did find a block while one additional miner was mining at P8xxx5UmtEyFEfqoCcjeRUy3NAGyMXXxSX, with a hash rate of about 4.5 TH, so I've manually paid 4.5/31.5=0.143 to that address...

Thanks P8xxx5UmtEyFEfqoCcjeRUy3NAGyMXXxSX, whoever you are!

I’m bad at math. Payment should be 5 times the above...will pay the rest when I can.
full member
Activity: 260
Merit: 100
I've started a new NOMP pool mining Universal and Digibyte (SHA-256) with 0% fees as it is still in test mode. But if you want to throw some mining power at it, please visit http://97.97.201.11. I have not found blocks yet so I cannot confirm that payouts are working but I have no reason to believe they wouldn't be working. I have two S9's pointed at it currently, one in each pool...there may be more being pointed at it later today.

I am planning on putting a MPOS front end on this pool, and maybe moving it to a data center that we run at my office if things go well.

Since it's NOMP, there is no signup; just put your payment address as your user name with any password. If you don't use a valid address, the pool will reject your connection.

Mining settings:

stratum+tcp://97.97.201.11:8333 (Universal)
stratum+tcp://97.97.201.11:8334 (Digibyte)

Appreciate any hashing power--happy mining!

Unfortunately, NOMP does not appear to be making payments. The pool did find a block while one additional miner was mining at P8xxx5UmtEyFEfqoCcjeRUy3NAGyMXXxSX, with a hash rate of about 4.5 TH, so I've manually paid 4.5/31.5=0.143 to that address (I had both my S9s working on this coin @ 13.5 each).

I've shut down the pool until I can get MPOS working that should handle payments better and provide a better front end for miners. Will repost when the new & (hopefully) improved pool is running.

Thanks P8xxx5UmtEyFEfqoCcjeRUy3NAGyMXXxSX, whoever you are!
newbie
Activity: 56
Merit: 0
Hello
How to setup S9 for mining UNIT?
For example for hashpool.eu
url, port, password (my wallet?), difficulty?

Is this correct:
URL: pool.hashpool.eu:3333
Worker: MY_UNIT_WALLET
Password: c=UNIT p=??? d=???

Also, how i can see stats for each my S9?

Please explain. Thank You.
newbie
Activity: 11
Merit: 0
anyone else having problems finding transactions/wallets on the main blockchain website?  (https://explorer.u-currency.com/)  I cannot find many recent transactions at all? even after they confirm on my wallet...
newbie
Activity: 15
Merit: 0
Hi there. Dear friends, could you help me with EXTREMELY slow wallet syncronization? Are there some more nodes except pointed in the firs post and hashpool.eu nodes?
I've downloaded the main block file from googledisk (some posts ago), but even new blocks are syncronizing very very very VEEEEERY slow.
newbie
Activity: 57
Merit: 0
                                                                                CoinRaper Miningpool [UNIT]
 

                                                                                 http://coinraper.ddnss.de/

                                                                       EXAMPLE for UNIVERSALCURRENCY [UNIT]

                                                         stratum+tcp://coinraper.ddnss.de:32032 -u WalletAdress -p x

                                                                                               Ports:
                                                                                    Port: 32031, Diff: 4096
                                                                                    Port: 32032, Diff: 8192
                                                                                    Port: 32033, Diff: 4160000
                                                               
                                                                      Payout minimum 10 Coins every 10 minutes
full member
Activity: 260
Merit: 100
I've started a new NOMP pool mining Universal and Digibyte (SHA-256) with 0% fees as it is still in test mode. But if you want to throw some mining power at it, please visit http://97.97.201.11. I have not found blocks yet so I cannot confirm that payouts are working but I have no reason to believe they wouldn't be working. I have two S9's pointed at it currently, one in each pool...there may be more being pointed at it later today.

I am planning on putting a MPOS front end on this pool, and maybe moving it to a data center that we run at my office if things go well.

Since it's NOMP, there is no signup; just put your payment address as your user name with any password. If you don't use a valid address, the pool will reject your connection.

Mining settings:

stratum+tcp://97.97.201.11:8333 (Universal)
stratum+tcp://97.97.201.11:8334 (Digibyte)

Appreciate any hashing power--happy mining!
full member
Activity: 260
Merit: 100
As a service to the community, I took a snapshot of the Universal blockchain this morning and uploaded it to Google Drive (you will have to ignore the "whoops" message and click download). Stop universal-qt, put the contents of the 7z file into your %appdata%\universalcurrency folder, and restart it. Should get you to the morning of 1/26/18, around 10 AM. Cuts the 58 hours of CPU time down to about 30 seconds.
Hello! Where did you download this blockchain?

I posted earliear about this...basically downloaded the blk0001.dat file from the first post of this thread, then let the wallet sync for 56 hours or so. Once synced, I just compressed the files from %APPDATA%\UniversalCurrency.
newbie
Activity: 7
Merit: 0
https://universal-currency.slack.com  Is this slackgroup now a private group? I am unable to sign up to this workgroup.


What's it mean not staking because coins are not mature? Why is that happening? The coins were staking until I encrypted the wallet.


 I rebooted the wallet  it resolved the issue.
Pages:
Jump to: