Greetings,
https://cryptap.us/myr currently hosts two block explorers:
insight: http://insight-myr.cryptap.us/
abe: https://cryptap.us/myr/explorer/chain/Myriadcoin
Please note that the Abe block explorer is now deprecated. If you have any services using abe, please consider migrating to the insight explorer. I suspect that eventually the abe explorer will go away.
Topic: [ANN][XMY] Myriad | Multi-Algo, Fair, Secure - page 90. (Read 850023 times)
Report spam to moderator, thanks.
It’s a party, and we’ve decided to put DGB into our signature lines. If you’re partying along, and haven’t heard, update your signature!!!
Wrong thread dude
Correct response dude
It’s a party, and we’ve decided to put DGB into our signature lines. If you’re partying along, and haven’t heard, update your signature!!!
Wrong thread dude
CoinMine.PW have been updated to the latest version.
thank you very much!
anyone have a list of working nodes
none of these work
addnode=85.195.118.163
addnode=144.76.139.178:443
addnode=144.76.139.103:443
addnode=144.76.139.104:443
addnode=144.76.139.106:443
addnode=144.76.139.107:443
addnode=144.76.139.108:443
addnode=144.76.139.109:443
addnode=144.76.139.110:443
addnode=141.101.117.210
addnode=162.218.48.55
addnode=178.49.118.233
none of these work
addnode=85.195.118.163
addnode=144.76.139.178:443
addnode=144.76.139.103:443
addnode=144.76.139.104:443
addnode=144.76.139.106:443
addnode=144.76.139.107:443
addnode=144.76.139.108:443
addnode=144.76.139.109:443
addnode=144.76.139.110:443
addnode=141.101.117.210
addnode=162.218.48.55
addnode=178.49.118.233
getpeerinfo
{
"addr" : "108.110.190.101:55130",
"services" : "00000001",
"lastsend" : 1418748768,
"lastrecv" : 1418748773,
"bytessent" : 80178,
"bytesrecv" : 196640,
"conntime" : 1418748556,
"pingtime" : 0.00000000,
"version" : 70002,
"subver" : "/Satoshi:0.9.2.7/",
"inbound" : true,
"startingheight" : 859311,
"banscore" : 0,
"syncnode" : true
},
{
"addr" : "85.195.118.163:10888",
"services" : "00000001",
"lastsend" : 1418748773,
"lastrecv" : 1418748773,
"bytessent" : 902,
"bytesrecv" : 82814,
"conntime" : 1418748575,
"pingtime" : 0.00000000,
"version" : 70002,
"subver" : "/Satoshi:0.9.2.10/",
"inbound" : false,
"startingheight" : 859311,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "80.229.35.19:10888",
"services" : "00000001",
"lastsend" : 1418748758,
"lastrecv" : 1418748770,
"bytessent" : 963,
"bytesrecv" : 98316,
"conntime" : 1418748581,
"pingtime" : 0.00000000,
"version" : 70002,
"subver" : "/Satoshi:0.9.2.10/",
"inbound" : false,
"startingheight" : 859311,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "108.61.10.90:10888",
"services" : "00000001",
"lastsend" : 1418748759,
"lastrecv" : 1418748775,
"bytessent" : 1268,
"bytesrecv" : 80562,
"conntime" : 1418748645,
"pingtime" : 0.00000000,
"version" : 70002,
"subver" : "/Satoshi:0.9.2.7/",
"inbound" : false,
"startingheight" : 859313,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "80.223.90.146:10888",
"services" : "00000001",
"lastsend" : 1418748766,
"lastrecv" : 1418748774,
"bytessent" : 469,
"bytesrecv" : 77350,
"conntime" : 1418748675,
"pingtime" : 0.00000000,
"version" : 70002,
"subver" : "/Satoshi:0.9.2.10/",
"inbound" : false,
"startingheight" : 859315,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "37.201.227.46:45644",
"services" : "00000001",
"lastsend" : 1418748752,
"lastrecv" : 1418748759,
"bytessent" : 75233,
"bytesrecv" : 291,
"conntime" : 1418748751,
"pingtime" : 0.00000000,
"version" : 70002,
"subver" : "/Satoshi:0.9.2.7/",
"inbound" : true,
"startingheight" : 859317,
"banscore" : 0,
"syncnode" : false
}
]
anyone have a list of working nodes
none of these work
addnode=85.195.118.163
addnode=144.76.139.178:443
addnode=144.76.139.103:443
addnode=144.76.139.104:443
addnode=144.76.139.106:443
addnode=144.76.139.107:443
addnode=144.76.139.108:443
addnode=144.76.139.109:443
addnode=144.76.139.110:443
addnode=141.101.117.210
addnode=162.218.48.55
addnode=178.49.118.233
none of these work
addnode=85.195.118.163
addnode=144.76.139.178:443
addnode=144.76.139.103:443
addnode=144.76.139.104:443
addnode=144.76.139.106:443
addnode=144.76.139.107:443
addnode=144.76.139.108:443
addnode=144.76.139.109:443
addnode=144.76.139.110:443
addnode=141.101.117.210
addnode=162.218.48.55
addnode=178.49.118.233
A community member has been working hard on an all-auxPoW multi-PoW coin for Myriad and many other coin communities. A lot of the "specifics" (mostly with regard to the algorithms used) are still up for debate.
We'll be launching this in a few weeks.
The project is called Unitus. The website is here: http://unitus.info/
We'll be launching this in a few weeks.
The project is called Unitus. The website is here: http://unitus.info/
Quote
About
Unitus = United
1. Joined into a single entity.
2. Involving the joint activity of multiple agents.
Unitus is about bringing together smaller crypto-currencies and the communities that support them into a larger group capable of greater change, influence and innovation, whilst allowing each to maintain their own unique identities.
Every aspect of this project will be driven by the community, for the community.
Specifications
-Modern Wallet - Started from Bitcoin 0.9.3, with significant influence from Myriadcoin (Multi-Algorithm) and Dogecoin (Merge-Mining)
-Multi-Algorithm
-1. Skein
-2. Qubit
-3. TBD
-4. TBD
-5. TBD
-All algorithms are merge-mined (AuxPoW)
-Each algorithm will have a 5 minute block time, resulting in a 1 minute block time for the whole network
Fair Distribution
-No Premine
-First 2000 blocks increase from 1 UIS to 100 UIS (approx. 33 Hours)
-Every 7 days / 10080 blocks the reward decays by 1% (compound)
-Decay continues until we reach 2 UIS (approx. June 2022) - and then this remains for each block thereafter
-No free transactions - minimum fee is 0.01 UIS
Launch Date: Late December 2014 (TDB)
Help Needed
We need your help! Major goals we'd like to achieve:
-A great website!
-Liaison with communities using same algorithms
-Block Explorer
-Reddit Styling and Moderation
... More to come
If you'd like to be involved, and have a good standing within an existing community, please contact us on Reddit
Unitus = United
1. Joined into a single entity.
2. Involving the joint activity of multiple agents.
Unitus is about bringing together smaller crypto-currencies and the communities that support them into a larger group capable of greater change, influence and innovation, whilst allowing each to maintain their own unique identities.
Every aspect of this project will be driven by the community, for the community.
Specifications
-Modern Wallet - Started from Bitcoin 0.9.3, with significant influence from Myriadcoin (Multi-Algorithm) and Dogecoin (Merge-Mining)
-Multi-Algorithm
-1. Skein
-2. Qubit
-3. TBD
-4. TBD
-5. TBD
-All algorithms are merge-mined (AuxPoW)
-Each algorithm will have a 5 minute block time, resulting in a 1 minute block time for the whole network
Fair Distribution
-No Premine
-First 2000 blocks increase from 1 UIS to 100 UIS (approx. 33 Hours)
-Every 7 days / 10080 blocks the reward decays by 1% (compound)
-Decay continues until we reach 2 UIS (approx. June 2022) - and then this remains for each block thereafter
-No free transactions - minimum fee is 0.01 UIS
Launch Date: Late December 2014 (TDB)
Help Needed
We need your help! Major goals we'd like to achieve:
-A great website!
-Liaison with communities using same algorithms
-Block Explorer
-Reddit Styling and Moderation
... More to come
If you'd like to be involved, and have a good standing within an existing community, please contact us on Reddit
Myriad Dice, Coinbomb and Transparent Ponzi Games!
Play and help support Myriad development.
There are now vanity addresses for the games (the old addresses will still work, no current plans to disable them). Webpage has been altered with QR codes to make playing via the Android app easy:
https://cryptap.us/myr/dice
From this week's donated dice, coinbomb, and Ponzi game proceeds:
No donation this week, house is -4963.08265218
Keep playing, remember that 90% of proceeds go to MYR development. Play for a good cause!
Play and help support Myriad development.
There are now vanity addresses for the games (the old addresses will still work, no current plans to disable them). Webpage has been altered with QR codes to make playing via the Android app easy:
https://cryptap.us/myr/dice
From this week's donated dice, coinbomb, and Ponzi game proceeds:
No donation this week, house is -4963.08265218
Keep playing, remember that 90% of proceeds go to MYR development. Play for a good cause!
Fixed broken diff data in myr-sha P2pool... stupid typo, realized when see that my miner throwing lotsof doa and pool eat 100% cpu every few moments...
Windows build also updated and send to my skydrive.
Windows build also updated and send to my skydrive.
1,000,000 Myriad prize draw, free to enter.
Please read the details at: http://www.reddit.com/r/myriadcoin/comments/2pcur6/1000000_myriad_prize_draw_free_to_enter/
Please read the details at: http://www.reddit.com/r/myriadcoin/comments/2pcur6/1000000_myriad_prize_draw_free_to_enter/
Here's a preview of Myriad Switcher 0.3, with the new functionality to make it work like Simplicity (mining into an Electrum walet via P2Pool) with minimal configuration.
All is needed now is to pick your mining device(s) and hit "Run". This is me mining on a single HD7950. Miners are now integrated in the app. No more popping command line windows
Pools can be added, removed or edited for each algo:
And I'm also working on an GUI editor for the different miner params (thread concurrency, work size, intensity, etc...)
Problem is I need to collect a "good enough" set of configs for each algo and GPU/CPU combination. That will probably take a while
All is needed now is to pick your mining device(s) and hit "Run". This is me mining on a single HD7950. Miners are now integrated in the app. No more popping command line windows
Pools can be added, removed or edited for each algo:
And I'm also working on an GUI editor for the different miner params (thread concurrency, work size, intensity, etc...)
Problem is I need to collect a "good enough" set of configs for each algo and GPU/CPU combination. That will probably take a while
Wonderful!
All Suprnova Myriad Pools have been updated to the latest Version
.....
Yep, if from within Dolphin I browse to /usr/local/src/myriadcoin-master/src/qt/
Right Click, open console here.
type ./myriadcoin-qt
the wallet runs and begins to sync. Thank you very much.
If I just type myriadcoin-qt from the console in the same directory I just get an error that says command not found. Also if I right click from within Dolphin and select open with console I just get console window, nothing happens.
Yep, if from within Dolphin I browse to /usr/local/src/myriadcoin-master/src/qt/
Right Click, open console here.
type ./myriadcoin-qt
the wallet runs and begins to sync. Thank you very much.
If I just type myriadcoin-qt from the console in the same directory I just get an error that says command not found. Also if I right click from within Dolphin and select open with console I just get console window, nothing happens.
You're very welcome. After it's completed the sync, you can move myriadcoin-qt to /usr/local/bin and then you can just type myriadcoin-qt from any console prompt.
Code:
sudo mv -i ./myriadcoin-qt /usr/local/bin/
I've never used KDE, but if it's similar to XFCE or GNOME, then you can navigate to /usr/share/applications and take a look at bitcoin.desktop (it's a text file) or any application you have and you can make one for myriadcoin? It will be part of your DE application menu.
myriadcoin-qt is located in the ~/myriadcoin-master/src/qt/ folder, however it is not executable. This file is roughly 1043.MB in size and is labeled as a shared library by Dolphin in the type column. If everything worked properly shouldn't myriadcoin-qt be an application?
When I performed the compile steps what folder should I have been in? After I took care of all the dependencies, I ran these commands
while in ~/myriadcoin-master/
1.) ./autogen.sh
2.) ./configure
3.) make
Come to think of it, I'm not sure why I am not doing my compiling in /usr/local/src. I have only compiled one other wallet and the guide I followed said to place the source code in /usr/local/src. I will move the myriad source there and try again.
Any other ideas about my compiling issue?
Thank you for the response Palawan
When I performed the compile steps what folder should I have been in? After I took care of all the dependencies, I ran these commands
while in ~/myriadcoin-master/
1.) ./autogen.sh
2.) ./configure
3.) make
Come to think of it, I'm not sure why I am not doing my compiling in /usr/local/src. I have only compiled one other wallet and the guide I followed said to place the source code in /usr/local/src. I will move the myriad source there and try again.
Any other ideas about my compiling issue?
Thank you for the response Palawan
Hi Merick, you're all set, actually. I see on your other post that the file is executable, it's just the file type shown in file manager says it's a shared library file.
There are 2 ways you can start the myriadcoin-qt application. On your file manager (i.e. dolphin?), right click on the myriadcoin-qt and choose "open with other application" and select your terminal application (i.e. Konsole?). You can also start it up from the command line in the folder the myriadcoin-qt is located, type ./myriadcoin-qt
If the file is moved to /usr/bin or /usr/local/bin, you can start the application by typing myriadcoin-qt on any terminal prompt.
I tried the chmod command but nothing changed. I'm guessing this command is the same as ticking the box in the GUI that says
Yep, if from within Dolphin I browse to /usr/local/src/myriadcoin-master/src/qt/
Right Click, open console here.
type ./myriadcoin-qt
the wallet runs and begins to sync. Thank you very much.
If I just type myriadcoin-qt from the console in the same directory I just get an error that says command not found. Also if I right click from within Dolphin and select open with console I just get console window, nothing happens.
The ./myriadcoin-qt command solved my problem, I don't think I would have ever guessed to put the ./ in front of the command.
Again, thanks
myriadcoin-qt is located in the ~/myriadcoin-master/src/qt/ folder, however it is not executable. This file is roughly 1043.MB in size and is labeled as a shared library by Dolphin in the type column. If everything worked properly shouldn't myriadcoin-qt be an application?
When I performed the compile steps what folder should I have been in? After I took care of all the dependencies, I ran these commands
while in ~/myriadcoin-master/
1.) ./autogen.sh
2.) ./configure
3.) make
Come to think of it, I'm not sure why I am not doing my compiling in /usr/local/src. I have only compiled one other wallet and the guide I followed said to place the source code in /usr/local/src. I will move the myriad source there and try again.
Any other ideas about my compiling issue?
Thank you for the response Palawan
When I performed the compile steps what folder should I have been in? After I took care of all the dependencies, I ran these commands
while in ~/myriadcoin-master/
1.) ./autogen.sh
2.) ./configure
3.) make
Come to think of it, I'm not sure why I am not doing my compiling in /usr/local/src. I have only compiled one other wallet and the guide I followed said to place the source code in /usr/local/src. I will move the myriad source there and try again.
Any other ideas about my compiling issue?
Thank you for the response Palawan
Hi Merick, you're all set, actually. I see on your other post that the file is executable, it's just the file type shown in file manager says it's a shared library file.
There are 2 ways you can start the myriadcoin-qt application. On your file manager (i.e. dolphin?), right click on the myriadcoin-qt and choose "open with other application" and select your terminal application (i.e. Konsole?). You can also start it up from the command line in the folder the myriadcoin-qt is located, type ./myriadcoin-qt
If the file is moved to /usr/bin or /usr/local/bin, you can start the application by typing myriadcoin-qt on any terminal prompt.
My mistake, the myriadcoin-qt file that is created is 104MB however it is not executable either by clicking on it or by trying to run it from within a console. The file type is shared library not executable.
It really shouldn't be that tricky if you have all dependencies installed, and it really should come out as an executable, but maybe try and explicitly set it as executable, like:
Code:
chmod 755 ./myriadcoin-qt
and then see if you can launch it.
I then navigate into the /qt folder which now contains many new object code files and a few folders as a result of the compile process, including the myriadcoin-qt file (size 104.9MB) labeled as shared library. I have checked this file via Dolphins right click.. properties menu and under permissions this file is marked as executable. Under the file type options menu this file is also marked as a *.so file.
As of right now, I am at a loss and I am about to just give up and try running the developer provided binaries under Wine and see how that works. I really would like to become more familiar with the Linux environment and figure this out.... is this the typical struggle of a Linux user?
Myriadcoin Developers, I appreciate the tough love in forcing me to learn Linux and how to compile but damn, show us Linux noobs some love like you do the Windows peeps, is a pre-compiled Linux binary an option?
Again, Thanks for all the help so far.
I use Debian 6 amd64 & boost 1.55
and no problems with Myriad
My mistake, the myriadcoin-qt file that is created is 104MB however it is not executable either by clicking on it or by trying to run it from within a console. The file type is shared library not executable.
I tried rebuilding with the ./configure --enable-tests=no --with-miniupnpc settings and this result in no myriadcoin-qt file being created.
https://github.com/myriadcoin/myriadcoin this is were I am downloading the source from, I am using the download zip button on the right side. Once it is downloaded I move the zip file into /usr/local/src and un-archive it here /usr/local/src/myriadcoin-master/
I then go into the myriadcoin-master folder via dolphin and right click open console here.
then it is
1.) ./autogen.sh
2.) ./configure
3.) make
I do not notice any error messages, the results are..
3 folders are modified or created.
/src
/share
/autom4te.cache
I then go into the src folder which contains multiple new folders as a result of the compile.
/build-aux
/compat
/leveldb
/obj-test
/qt
/test
I then navigate into the /qt folder which now contains many new object code files and a few folders as a result of the compile process, including the myriadcoin-qt file (size 104.9MB) labeled as shared library. I have checked this file via Dolphins right click.. properties menu and under permissions this file is marked as executable. Under the file type options menu this file is also marked as a *.so file.
As of right now, I am at a loss and I am about to just give up and try running the developer provided binaries under Wine and see how that works. I really would like to become more familiar with the Linux environment and figure this out.... is this the typical struggle of a Linux user?
Myriadcoin Developers, I appreciate the tough love in forcing me to learn Linux and how to compile but damn, show us Linux noobs some love like you do the Windows peeps, is a pre-compiled Linux binary an option?
Again, Thanks for all the help so far.
I tried rebuilding with the ./configure --enable-tests=no --with-miniupnpc settings and this result in no myriadcoin-qt file being created.
https://github.com/myriadcoin/myriadcoin this is were I am downloading the source from, I am using the download zip button on the right side. Once it is downloaded I move the zip file into /usr/local/src and un-archive it here /usr/local/src/myriadcoin-master/
I then go into the myriadcoin-master folder via dolphin and right click open console here.
then it is
1.) ./autogen.sh
2.) ./configure
3.) make
I do not notice any error messages, the results are..
3 folders are modified or created.
/src
/share
/autom4te.cache
I then go into the src folder which contains multiple new folders as a result of the compile.
/build-aux
/compat
/leveldb
/obj-test
/qt
/test
I then navigate into the /qt folder which now contains many new object code files and a few folders as a result of the compile process, including the myriadcoin-qt file (size 104.9MB) labeled as shared library. I have checked this file via Dolphins right click.. properties menu and under permissions this file is marked as executable. Under the file type options menu this file is also marked as a *.so file.
As of right now, I am at a loss and I am about to just give up and try running the developer provided binaries under Wine and see how that works. I really would like to become more familiar with the Linux environment and figure this out.... is this the typical struggle of a Linux user?
Myriadcoin Developers, I appreciate the tough love in forcing me to learn Linux and how to compile but damn, show us Linux noobs some love like you do the Windows peeps, is a pre-compiled Linux binary an option?
Again, Thanks for all the help so far.
Jump to: