Is there any yacoin p2pool active?
I'm having the same problem, i just found about yacoin but don't seem to find a p2p pool
Topic: [ANN][YAC][POOL]p2pool for yacoin!! (Read 28208 times)
I'm having the same problem, i just found about yacoin but don't seem to find a p2p pool
Is there any yacoin p2pool active?
Sorry for the hiccups this morning, was testing a qrk p2pool and forgot to set ulimit -n higher, resulting in the dreaded "too many files open" error.
Ok, disabled POS generation in deamon, it is managable now ;]
http://rav3n.dtdns.net:8336 1% fee
use if want
http://rav3n.dtdns.net:8336/feee to see fee
http://rav3n.dtdns.net:8336/peer_addresses to see connected nodes (have 6 of them atm)
http://rav3n.dtdns.net:8336 1% fee
use if want
http://rav3n.dtdns.net:8336/feee to see fee
http://rav3n.dtdns.net:8336/peer_addresses to see connected nodes (have 6 of them atm)
Yac appeared today on p2pool.org:
http://204.10.105.89:12575
http://204.10.105.89:12575/static/
source: https://bitcointalksearch.org/topic/--280898
I'm testing it, but no payout yet...
Pulled from my addrs file of yac node:http://204.10.105.89:12575
http://204.10.105.89:12575/static/
source: https://bitcointalksearch.org/topic/--280898
I'm testing it, but no payout yet...
Code:
http://100.1.31.81:8336
http://101.80.117.78:8336
http://105.224.42.210:8336
http://105.225.182.198:8336
http://105.227.185.20:8336
http://105.227.187.216:8336
http://105.228.167.107:8336
http://106.187.55.212:8336
http://106.187.99.43:8336
http://108.58.12.54:8336
http://109.80.94.251:8336
http://110.174.192.158:8336
http://111.222.37.53:8336
http://112.237.32.208:8336
http://113.243.107.70:8336
http://113.243.193.58:8336
http://113.243.60.36:8336
http://116.52.11.27:8336
http://117.25.9.205:8336
http://118.123.249.105:8336
http://121.217.112.70:8336
http://121.236.208.186:8336
http://123.130.137.10:8336
http://124.79.29.69:8336
http://124.79.30.250:8336
http://125.65.108.19:8336
http://137.117.192.218:8336
http://137.135.240.112:8336
http://140.112.183.10:8336
http://140.224.104.31:8336
http://168.215.228.25:8336
http://172.248.200.38:8336
http://176.31.107.38:8336
http://180.155.81.67:8336
http://180.155.87.198:8336
http://180.155.89.208:8336
http://184.175.53.111:8336
http://188.134.4.144:8336
http://192.168.178.201:8336
http://192.69.192.202:8336
http://196.210.238.252:8336
http://198.84.186.74:8336
http://199.188.206.150:8336
http://199.195.213.96:8336
http://203.12.171.66:8336
http://208.93.233.183:8336
http://212.92.177.74:8336
http://213.239.207.114:8336
http://217.111.66.76:8336
http://217.111.66.76:8336
http://218.241.176.120:8336
http://218.79.124.164:8336
http://218.79.126.206:8336
http://218.81.221.241:8336
http://218.85.48.253:8336
http://222.161.199.156:8336
http://222.33.43.10:8336
http://222.62.187.66:8336
http://223.4.32.128:8336
http://27.155.225.115:8336
http://31.220.1.53:8336
http://37.221.170.226:8336
http://37.59.119.242:8336
http://46.163.105.201:8336
http://49.212.204.152:8336
http://54.225.255.202:8336
http://54.226.35.73:8336
http://54.252.180.83:8336
http://60.191.123.110:8336
http://60.215.216.52:8336
http://60.215.218.157:8336
http://61.153.180.10:8336
http://61.153.181.251:8336
http://62.219.98.129:8336
http://65.27.107.198:8336
http://66.214.239.117:8336
http://66.214.32.54:8336
http://66.7.205.227:8336
http://66.71.246.74:8336
http://67.202.5.217:8336
http://67.239.180.193:8336
http://69.164.197.150:8336
http://70.180.89.26:8336
http://71.231.172.18:8336
http://77.248.82.110:8336
http://77.248.82.110:8336
http://80.221.196.239:8336
http://81.17.30.113:8336
http://81.17.30.121:8336
http://81.62.136.32:8336
http://81.62.168.160:8336
http://81.62.99.252:8336
http://82.234.193.23:8336
http://82.234.193.23:8336
http://83.152.160.212:8336
http://83.78.10.64:8336
http://83.78.36.40:8336
http://83.78.63.50:8336
http://83.79.132.25:8336
http://83.79.172.185:8336
http://83.79.179.199:8336
http://83.79.182.129:8336
http://83.79.49.249:8336
http://83.79.81.229:8336
http://83.79.98.48:8336
http://84.200.240.198:8336
http://84.253.197.96:8336
http://84.253.197.96:8336
http://85.228.195.71:8336
http://85.228.201.126:8336
http://85.240.90.244:8336
http://85.56.196.69:8336
http://87.98.221.175:8336
http://88.168.16.150:8336
http://88.190.223.101:8336
http://88.204.169.242:8336
http://88.222.210.56:8336
http://91.230.204.45:8336
http://91.235.254.37:8336
http://92.195.108.49:8336
http://92.195.6.169:8336
http://95.138.185.176:8336
edit: fixed ports... http://101.80.117.78:8336
http://105.224.42.210:8336
http://105.225.182.198:8336
http://105.227.185.20:8336
http://105.227.187.216:8336
http://105.228.167.107:8336
http://106.187.55.212:8336
http://106.187.99.43:8336
http://108.58.12.54:8336
http://109.80.94.251:8336
http://110.174.192.158:8336
http://111.222.37.53:8336
http://112.237.32.208:8336
http://113.243.107.70:8336
http://113.243.193.58:8336
http://113.243.60.36:8336
http://116.52.11.27:8336
http://117.25.9.205:8336
http://118.123.249.105:8336
http://121.217.112.70:8336
http://121.236.208.186:8336
http://123.130.137.10:8336
http://124.79.29.69:8336
http://124.79.30.250:8336
http://125.65.108.19:8336
http://137.117.192.218:8336
http://137.135.240.112:8336
http://140.112.183.10:8336
http://140.224.104.31:8336
http://168.215.228.25:8336
http://172.248.200.38:8336
http://176.31.107.38:8336
http://180.155.81.67:8336
http://180.155.87.198:8336
http://180.155.89.208:8336
http://184.175.53.111:8336
http://188.134.4.144:8336
http://192.168.178.201:8336
http://192.69.192.202:8336
http://196.210.238.252:8336
http://198.84.186.74:8336
http://199.188.206.150:8336
http://199.195.213.96:8336
http://203.12.171.66:8336
http://208.93.233.183:8336
http://212.92.177.74:8336
http://213.239.207.114:8336
http://217.111.66.76:8336
http://217.111.66.76:8336
http://218.241.176.120:8336
http://218.79.124.164:8336
http://218.79.126.206:8336
http://218.81.221.241:8336
http://218.85.48.253:8336
http://222.161.199.156:8336
http://222.33.43.10:8336
http://222.62.187.66:8336
http://223.4.32.128:8336
http://27.155.225.115:8336
http://31.220.1.53:8336
http://37.221.170.226:8336
http://37.59.119.242:8336
http://46.163.105.201:8336
http://49.212.204.152:8336
http://54.225.255.202:8336
http://54.226.35.73:8336
http://54.252.180.83:8336
http://60.191.123.110:8336
http://60.215.216.52:8336
http://60.215.218.157:8336
http://61.153.180.10:8336
http://61.153.181.251:8336
http://62.219.98.129:8336
http://65.27.107.198:8336
http://66.214.239.117:8336
http://66.214.32.54:8336
http://66.7.205.227:8336
http://66.71.246.74:8336
http://67.202.5.217:8336
http://67.239.180.193:8336
http://69.164.197.150:8336
http://70.180.89.26:8336
http://71.231.172.18:8336
http://77.248.82.110:8336
http://77.248.82.110:8336
http://80.221.196.239:8336
http://81.17.30.113:8336
http://81.17.30.121:8336
http://81.62.136.32:8336
http://81.62.168.160:8336
http://81.62.99.252:8336
http://82.234.193.23:8336
http://82.234.193.23:8336
http://83.152.160.212:8336
http://83.78.10.64:8336
http://83.78.36.40:8336
http://83.78.63.50:8336
http://83.79.132.25:8336
http://83.79.172.185:8336
http://83.79.179.199:8336
http://83.79.182.129:8336
http://83.79.49.249:8336
http://83.79.81.229:8336
http://83.79.98.48:8336
http://84.200.240.198:8336
http://84.253.197.96:8336
http://84.253.197.96:8336
http://85.228.195.71:8336
http://85.228.201.126:8336
http://85.240.90.244:8336
http://85.56.196.69:8336
http://87.98.221.175:8336
http://88.168.16.150:8336
http://88.190.223.101:8336
http://88.204.169.242:8336
http://88.222.210.56:8336
http://91.230.204.45:8336
http://91.235.254.37:8336
http://92.195.108.49:8336
http://92.195.6.169:8336
http://95.138.185.176:8336
Is the http://p2pool.org/ YAcoin pool working correctly? Ive found a few blocks but nothing gets sent to my wallet? my address is YLCkujzGqVyNshsss1qTrVMPG4RWiKmksk i have screen shots of blocks found. If anyone can help please reply or PM me. I mine other coins on p2pool with no issues just this one. Many thanks
Yac appeared today on p2pool.org:
http://204.10.105.89:12575
http://204.10.105.89:12575/static/
source: https://bitcointalksearch.org/topic/--280898
I'm testing it, but no payout yet...
http://204.10.105.89:12575
http://204.10.105.89:12575/static/
source: https://bitcointalksearch.org/topic/--280898
I'm testing it, but no payout yet...
That's sad but understandable. To get back my server costs I'd have to raise the fee to at least 3% too, luckily the server runs a bunch of other stuff aswell, so I have it available anyways.
What happend to most YAC P2Ppools? I only can connect to yacpool.tk at the moment
I closed bitvolcano because it never attracted enough miners to pay it's server fees.
There is also http://yacpool.cloudapp.net:8336/static/ but I think it doesn't work properly because I have not received any payout from it.. 
What happend to most YAC P2Ppools? I only can connect to yacpool.tk at the moment
Anyone knows how to compile this p2pool from source code for windows?
I have tried to follow the instructions on git, but it failed to compile yac_scrypt with the following error:
C:\Users\user\AppData\Local\Temp\ccbaDXFx.s:23: Error: junk at end of line, first unrecognized character is `h'
I google this and found it might be related with gcc version of mingw, and I got gcc 4.6.2 in mingw.
Thanks for any hint.
Try take the one compiled from my skydrive. I have tried to follow the instructions on git, but it failed to compile yac_scrypt with the following error:
C:\Users\user\AppData\Local\Temp\ccbaDXFx.s:23: Error: junk at end of line, first unrecognized character is `h'
I google this and found it might be related with gcc version of mingw, and I got gcc 4.6.2 in mingw.
Thanks for any hint.
bump 
I am really pleased how well our pool is running lately, no idea what you did rav3n but it was awesome. Anyone getting sick of Primecoin and it's high difficulty, throw some CPU cycles our way and get some easy YAC.
I am really pleased how well our pool is running lately, no idea what you did rav3n but it was awesome. Anyone getting sick of Primecoin and it's high difficulty, throw some CPU cycles our way and get some easy YAC.
Anyone knows how to compile this p2pool from source code for windows?
I have tried to follow the instructions on git, but it failed to compile yac_scrypt with the following error:
C:\Users\user\AppData\Local\Temp\ccbaDXFx.s:23: Error: junk at end of line, first unrecognized character is `h'
I google this and found it might be related with gcc version of mingw, and I got gcc 4.6.2 in mingw.
Thanks for any hint.
I have tried to follow the instructions on git, but it failed to compile yac_scrypt with the following error:
C:\Users\user\AppData\Local\Temp\ccbaDXFx.s:23: Error: junk at end of line, first unrecognized character is `h'
I google this and found it might be related with gcc version of mingw, and I got gcc 4.6.2 in mingw.
Thanks for any hint.
I see, old version had an unusual high amount of dead shares indeed... Today seems to be a good day, 123146 and 123044 were orphans but no chain followed.
We can try make shorter share period, but I not see how this will help avoid orphaned blocks.
Maybe "old" version making same thing, but we not see that because more shares got orphaned and block not shows up on "last blocks" page.
Now we have less orphaned shares and we see more orphaned blocks.
Maybe "old" version making same thing, but we not see that because more shares got orphaned and block not shows up on "last blocks" page.
Now we have less orphaned shares and we see more orphaned blocks.
Yes, use 10 min blocks instead of 1 min blocks.
There is another version of YaCoin, called Bitcoin, which seems to do that.
YAC's orphan rate is not high at all, the problem lies within the current YAC p2pool version: it is much more stable and ressource friendly than the previous one, but produces ~25% orphans unlike the previous version. There is another version of YaCoin, called Bitcoin, which seems to do that.
Indeed. 
Anyone got an idea to fix that evil 10 orphan blocks in a row issue?
Anyone got an idea to fix that evil 10 orphan blocks in a row issue?
Bit of a bump to remind everyone we're still here!
Have updated, am now running the latest version of your code, and scaled down to a smaller server instance to see if it makes much difference in terms of dead shares or efficiency.
Jump to: