Antminer D3 firmware Blissz V1.12 NoFee - page 3.

newbie

Activity: 5

Merit: 0

Quote from: darkly spectre on February 19, 2018, 09:19:22 PM

If anybody wants the firmware just PM me. I am not going to risk actually posting it here since greedy mcMoney might report me for it

Hi, would you be so kind as to send me a link to the blissz free latest firmware?

I would really appreciate it and also willing to share my knowledge to help you if you are interested. I currently have two d3s operating beautifully and COMPLETELY silently using a unique liquid immersion cooling system I could share the plans with you.

I justify skiping the fee because after all much of the programming from cgminer and bitmain was taken from them with no compensation and he DID make some fees already... and the D3 mining game is so close to over that at this point is ok ...

Cheers

Mateus

I think I tried to pm you but it says you have to change your settings if you want to allow newbies like me to be able to pm you.

Oil immersion cooling d3

newbie

Activity: 5

Merit: 0

Quote from: adidia on January 28, 2018, 05:41:27 PM

Quote from: ?? on ??

anyone has the new version?

the new versions do not work for 4 blades...only 3 cards i have custom D3s with 4 boards and i tried and didnt work

Hi, i tried to pm you but it says that you need to change your settings to allows newbies to pm you.

Anyways, I tried putting a fourth hashboard on my d3 but the fourth hashboard would only put out half the hashrate for some reason. Did you have this problem also?

BTW i am running 5 hasboards on one powersupply and two controller boards immersed in oil works great. Let me know if you want to share mining war stories.

Any chance you coiuld let me try the blissz no fee version?

scubatron

newbie

Activity: 1

Merit: 0

Quote from: digital$ on March 09, 2018, 11:49:07 AM

if anyone wants this version..pm me. a member here was kind enough to send it to me(Thx to darkly spectre!!) ill do the same for others.

Hi, can you PM me the link for this firmware? Much appreciate!

zedbg

newbie

Activity: 2

Merit: 0

Would be great if someone can send me a link in PM, thanks a lot

xcajun21

sr. member

Activity: 742

Merit: 252

Quote from: miniliano on March 05, 2018, 01:29:41 PM

i tested the firmware . Thx to darkly spectre!!
(The "guy" who did this "work" ask 50 $ for this )

Test results: The guy did not erase the dev pools. they are just drawn offline so if u have the idea to mine on suprnova dash u can forget it. suprnova is offline. this is the BIG ESCAMOTAGE. so miner have bads behaviors:

When u start the rig or if u have to reboot u will be NOT able to change/ add/ remove pools for few minutes because the d3 is thinking to mine the dev fee; ofc u can resolve setting your own pool but i think is a big minus, because u have to wait.
Bed compatibility with Awesome miner. Profitability switch automatically works, but u cant use "prioritize" command. For a manual switch u have to go setting of all pools and change priority. i think another big minus.

this firmware worth 50$? absolutely not. And if u use "awesome miner" is so so bad mostly if u have more miners.
conclusion: Im a Awesome miner user so ill go back to the fee version until someone with more competencies will do the work

Could you give an update on this? How is the firmware? does this dev pool affect anything?

microtechies

newbie

Activity: 34

Merit: 0

Quote from: digital$ on March 09, 2018, 11:49:07 AM

if anyone wants this version..pm me. a member here was kind enough to send it to me(Thx to darkly spectre!!) ill do the same for others.

Hello, if you could send me the link please, I can't seem to send messages as I'm seen as a n00b Cheesy

digital$

member

Activity: 287

Merit: 18

if anyone wants this version..pm me. a member here was kind enough to send it to me(Thx to darkly spectre!!) ill do the same for others.

pavesi

member

Activity: 83

Merit: 12

Please pm me the link also

miniliano

newbie

Activity: 23

Merit: 0

Quote from: digital$ on March 05, 2018, 05:50:09 AM

Hi all, looking for no-fee version. will send whoever gives me link/file some "dash" as a donation : )

i sent the link via pm for free but u cant receive "noobs" pm

miniliano

newbie

Activity: 23

Merit: 0

i tested the firmware . Thx to darkly spectre!!
(The "guy" who did this "work" ask 50 $ for this )

Test results: The guy did not erase the dev pools. they are just drawn offline so if u have the idea to mine on suprnova dash u can forget it. suprnova is offline. this is the BIG ESCAMOTAGE. so miner have bads behaviors:

When u start the rig or if u have to reboot u will be NOT able to change/ add/ remove pools for few minutes because the d3 is thinking to mine the dev fee; ofc u can resolve setting your own pool but i think is a big minus, because u have to wait.
Bed compatibility with Awesome miner. Profitability switch automatically works, but u cant use "prioritize" command. For a manual switch u have to go setting of all pools and change priority. i think another big minus.

this firmware worth 50$? absolutely not. And if u use "awesome miner" is so so bad mostly if u have more miners.
conclusion: Im a Awesome miner user so ill go back to the fee version until someone with more competencies will do the work

digital$

member

Activity: 287

Merit: 18

Hi all, looking for no-fee version. will send whoever gives me link/file some "dash" as a donation : )

tc_

newbie

Activity: 16

Merit: 0

hey all if someone can pm the link to try out nofee 1.12?

plz

tufail_74

newbie

Activity: 72

Merit: 0

I flashed with No Fee and faced no issue.

Did you try to reflash? If still problem flash once with official firmware and then again No Fee. You are not supposed to have problem if flashing was successful.

miniliano

newbie

Activity: 23

Merit: 0

Quote from: tufail_74 on February 22, 2018, 11:45:21 AM

basically it is stealing from blissz as this was his effort. he deserves by all means this fee. we did suggested to him to make it once but the whole process of development has terminated due to silly arrogant attitude by someone else.

i still want blissz to finalize the firmware and i will be first to pay him fee for his wonderful effort.

I received the version with no fee ( tnx m8) but i have troubles, after flashing it doesn't see the cgminer version and refuse socked connection. Had someone the same problems?

tufail_74

newbie

Activity: 72

Merit: 0

basically it is stealing from blissz as this was his effort. he deserves by all means this fee. we did suggested to him to make it once but the whole process of development has terminated due to silly arrogant attitude by someone else.

i still want blissz to finalize the firmware and i will be first to pay him fee for his wonderful effort.

darkly spectre

full member

Activity: 308

Merit: 107

If anybody wants the firmware just PM me. I am not going to risk actually posting it here since greedy mcMoney might report me for it

Punisher187

newbie

Activity: 1

Merit: 0

darkly spectre, if you would be so kind as to send be me the Firmware I would greatly appreciate it.

darkly spectre

full member

Activity: 308

Merit: 107

Quote from: DIMESECO on February 11, 2018, 10:26:49 AM

CGMiner version is 4.10.0

Instead of blaspheming and cursing, you could also remain friendly and objective. But that seems to be the standard in this forum. So I ignore it.

I make no secret that it is a variant of Blissz's firmware. But it is not a fake and works very reliable without DevFee.

Everyone should decide for themselves whether it is useful or not.

dude you took something. removed the fee. had it around for free since it was for people that didn't want their D3 that barely makes money mining for somebody else

and then suddenly ask FIFTY dollars for it.

so you are either telling people to give up 10-13 days worth of mining money. do you know how long it would take for blissz to make 50 dollars on the fee version? like a half year or longer. but nope "lol give me 50 dollars"

meanwhile I will continue giving people the file for free as it should have been.

cobusg

newbie

Activity: 12

Merit: 0

Quote from: ?? on ??

does this show 4.10.0 or the 4.9.0?

i need the 4.9.0 version

i found this version here and is free http://www.filedropper.com/antminer-d3-nofeetar but is not the 4.9.0 and does not have autotune

File seems corrupted unfortunately

DIMESECO

newbie

Activity: 15

Merit: 0

Quote from: ?? on ??

paid on this website.
already see message: waiting for payment
no email support. just ignore my emails.
scam!! don't buy!

pls send me pm with transaction no if you have any problems. I will care about that. Satoshibox normally uses cookies to let you download software after finishing payment. So use link again and check if download is available now.

Topic: Antminer D3 firmware Blissz V1.12 NoFee - page 3. (Read 2552 times)