definitely can ping stratum.btcguild.com.
PING stratum.btcguild.com (198.245.63.145): 56 data bytes
64 bytes from 198.245.63.145: seq=0 ttl=51 time=43.022 ms
64 bytes from 198.245.63.145: seq=1 ttl=51 time=52.764 ms
64 bytes from 198.245.63.145: seq=2 ttl=51 time=50.815 ms
64 bytes from 198.245.63.145: seq=3 ttl=51 time=42.222 ms
64 bytes from 198.245.63.145: seq=4 ttl=51 time=46.121 ms
--- stratum.btcguild.com ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 42.222/46.988/52.764 ms
I watched this video https://www.youtube.com/watch?v=iuBvGUT6VM8
and with the exception of his IP address, I matched it setting for setting.
the miner sees the pool. the pool sees the miner. but there is no mining going on.
I can watch the traffic (on the firewall) between the miner and the pool.
https://www.evernote.com/shard/s2/sh/36403901-73cb-4463-be3c-5e8a223ffa15/d231c7c1406d81a3aad6e0ab9fe965f7/res/e35fc4d9-733e-4c3e-8105-bba11b932356/skitch.png?resizeSmall&width=832
https://www.evernote.com/shard/s2/sh/b84389f4-ea35-45d9-aa24-156f68c858ea/f8404838e63714d99875d801ced305fe/res/abc2a7a7-deb5-4bc4-badf-4b51f2d3c521/skitch.png?resizeSmall&width=832
https://www.evernote.com/shard/s2/sh/c510e3b8-a082-4b43-a0a0-d48ea08dac85/70e2fb08bc5ea7b77769b475f01f8046/res/b4189898-a90b-4eaf-9f09-f2ce033addf7/skitch.png?resizeSmall&width=832
Topic: Antminer S1 setup - page 2. (Read 2326 times)
Ok I am home. Just for giggles, have you tried pinging stratum.btcguild.com? You can do this from the diagnostics tab. Just type it in.
Yea, that reset button is small. But after you've pressed it 75 times as I have, I can find it in my sleep.
I went back in an made the WAN port active via DCHP, and now the miner sees the outside network via that port.
But I still have no mining going on. I don't understand why this is being so difficult.
I went back in an made the WAN port active via DCHP, and now the miner sees the outside network via that port.
But I still have no mining going on. I don't understand why this is being so difficult.
Not to worry. I set mine to the wrong ip range and had to factory reset. It is FUN finding that reset button.
Screenshots would be awesome.
I had the WAN ports set up, and the miner could talk outside the network just fine. But mining would never start. So I read some forums somewhere and they said the use the LAN port.
Now the LAN ports work the way they are supposed to, but still, no mining.
I'm not proud to say this, but I've been struggling at getting mining started for over 2 weeks, and I can't get anything to happen.
I had the WAN ports set up, and the miner could talk outside the network just fine. But mining would never start. So I read some forums somewhere and they said the use the LAN port.
Now the LAN ports work the way they are supposed to, but still, no mining.
I'm not proud to say this, but I've been struggling at getting mining started for over 2 weeks, and I can't get anything to happen.
I notice you have your interfaces bridged. The way my s1 is setup is I have all my ip settings on the wan port. My interfaces are also bridged, so I do not have any ip settings on the Lan port (set to dhcp client). I also notice you have 2 Lan interfaces. Is that wireless and wired? I am not using the wireless as I have seen complaints about it.
If you need I can give you screenshots of my setup once I am home.
If you need I can give you screenshots of my setup once I am home.
I've been struggling with this for weeks. I cannot figure out what needs to happen in order for the miner to actually start mining.
The vendor has been no help, other than replacing the miner, but the problems I'm having are the exact same.
Is someone able to help me figure out what I'm doing wrong? I've set the miner up, and the miner can communicate to devices outside of my network. The credentials have been tested by the vendor. But I cannot get the mining to start.
https://www.evernote.com/shard/s2/sh/6e4a801f-7e5a-447b-8f30-58faa848a1b6/88305c72aadb8fdb50fe4c32892b6a31/res/7c7f88b8-f589-4441-b83b-e7b8a953e645/skitch.png?resizeSmall&width=832
https://www.evernote.com/shard/s2/sh/ecdee225-72d6-41b9-bec2-ffa5118f9017/52de063b6b9236d93d9d3dd1a5a97b1b/res/906bcd6d-4a8f-4091-a9a6-7c53142dbcc0/skitch.png?resizeSmall&width=832
https://www.evernote.com/shard/s2/sh/133d26a4-2383-4eea-b92a-2e5b9bd0f5ab/c23ce77ff5def43dd741662d1ef9be19/res/f88cf820-56be-41a0-95e6-3dd88527806d/skitch.png?resizeSmall&width=832
The WAN port is disabled, and I'm communicating with the miner via the LAN port.
The LAN port has full access to my network and outside of my internet connection.
https://www.evernote.com/shard/s2/sh/19309d3d-a102-4b03-9265-be7c78cc6df7/528528c8a94f5ad70800fb1806634175/res/fff00dd7-92e2-4098-81b7-9b174d8a5e1d/skitch.png?resizeSmall&width=832
https://www.evernote.com/shard/s2/sh/b001ee90-1a48-42b3-a457-aa122f910bf6/4aade074817cc6cbddb45ca4e6ef4622/res/4b844adb-bf6d-4632-b2d5-03f550e13a27/skitch.png?resizeSmall&width=832
It's configuration:
https://www.evernote.com/shard/s2/sh/b058a457-1fe2-45ff-91de-eb0a8c7716f3/28519fad0f0b9ca59b8ac10c67142fb4/res/15fa72a6-6e1a-4835-a64f-c555eac46996/skitch.png?resizeSmall&width=832
The vendor has been no help, other than replacing the miner, but the problems I'm having are the exact same.
Is someone able to help me figure out what I'm doing wrong? I've set the miner up, and the miner can communicate to devices outside of my network. The credentials have been tested by the vendor. But I cannot get the mining to start.
https://www.evernote.com/shard/s2/sh/6e4a801f-7e5a-447b-8f30-58faa848a1b6/88305c72aadb8fdb50fe4c32892b6a31/res/7c7f88b8-f589-4441-b83b-e7b8a953e645/skitch.png?resizeSmall&width=832
https://www.evernote.com/shard/s2/sh/ecdee225-72d6-41b9-bec2-ffa5118f9017/52de063b6b9236d93d9d3dd1a5a97b1b/res/906bcd6d-4a8f-4091-a9a6-7c53142dbcc0/skitch.png?resizeSmall&width=832
https://www.evernote.com/shard/s2/sh/133d26a4-2383-4eea-b92a-2e5b9bd0f5ab/c23ce77ff5def43dd741662d1ef9be19/res/f88cf820-56be-41a0-95e6-3dd88527806d/skitch.png?resizeSmall&width=832
The WAN port is disabled, and I'm communicating with the miner via the LAN port.
The LAN port has full access to my network and outside of my internet connection.
https://www.evernote.com/shard/s2/sh/19309d3d-a102-4b03-9265-be7c78cc6df7/528528c8a94f5ad70800fb1806634175/res/fff00dd7-92e2-4098-81b7-9b174d8a5e1d/skitch.png?resizeSmall&width=832
https://www.evernote.com/shard/s2/sh/b001ee90-1a48-42b3-a457-aa122f910bf6/4aade074817cc6cbddb45ca4e6ef4622/res/4b844adb-bf6d-4632-b2d5-03f550e13a27/skitch.png?resizeSmall&width=832
It's configuration:
https://www.evernote.com/shard/s2/sh/b058a457-1fe2-45ff-91de-eb0a8c7716f3/28519fad0f0b9ca59b8ac10c67142fb4/res/15fa72a6-6e1a-4835-a64f-c555eac46996/skitch.png?resizeSmall&width=832
Jump to: