Topic: Antminer S2 Speculation thread - page 2. (Read 6694 times)
Seems to me regardless of what process node they use they will need to use a chip with improved power consumption in the S2. In the original U1 the chip was always under clocked. The U2+ just took the same chip added a bigger heat sink and changed the default clock rate. Since the S1 was already operating at close to the maximum clock rate they will almost certainly have to use an improved chip in the S2.
So everyone guessing here with the release of S2... If it is 1TH, that number sounds great however if it going to use 55nm, then as mentioned before power consumption will be roughly 2kW... technically they will be putting a machine with 178 chips on the board for S2 (5.55 S1's).
28nm sounds much better as the difficulty is getting hard and harder, lowering the electricity bill will be appreciated.
28nm sounds much better as the difficulty is getting hard and harder, lowering the electricity bill will be appreciated.
Bitmain may be bluffing us 
But I am sure S2 is 1Th/s and also improved cooling system and power I have been told 
and yeah start in April.
S3 must be 28nm what they were talking to me about.
All will be reviled soon
But I am sure S2 is 1Th/s and also improved cooling system and power I have been told and yeah start in April.S3 must be 28nm what they were talking to me about.
All will be reviled soon
Can we expect like 2 kW of power consumption (cuz they are using same s1 55nm chips, correct)?
Ah, was just going off what I had been told directly by BITMAIN in regards to their product release (and closing) timeline for products. In particular:
"Our company's new product is ANTMINER S2 , 1000GH/S in april"
"S1 will stop sell in may"
"S1 and S2 is 55nm tech . we will use 28nm in june"
and so on..
"Our company's new product is ANTMINER S2 , 1000GH/S in april"
"S1 will stop sell in may"
"S1 and S2 is 55nm tech . we will use 28nm in june"
and so on..
Bitmain may be bluffing us
But I am sure S2 is 1Th/s and also improved cooling system and power I have been told and yeah start in April.S3 must be 28nm what they were talking to me about.
All will be reviled soon
Ah, was just going off what I had been told directly by BITMAIN in regards to their product release (and closing) timeline for products. In particular:
"Our company's new product is ANTMINER S2 , 1000GH/S in april"
"S1 will stop sell in may"
"S1 and S2 is 55nm tech . we will use 28nm in june"
and so on..
"Our company's new product is ANTMINER S2 , 1000GH/S in april"
"S1 will stop sell in may"
"S1 and S2 is 55nm tech . we will use 28nm in june"
and so on..
The S2 will be 1000 GH/s, will use 55nm tech, and will be released in April.
In June, they will start implementing 28nm tech in their next products.
In June, they will start implementing 28nm tech in their next products.
Hmmmm parts are right but from what I am been speaking to Bitmain they are not using 55nm in next batch... 28nm I have been told
The S2 will be 1000 GH/s, will use 55nm tech, and will be released in April.
In June, they will start implementing 28nm tech in their next products.
In June, they will start implementing 28nm tech in their next products.
My Company is in talks with Bitmain about S2
So far is sounding very good Give it some time Bitmain will release the goon news and sexy design
wowowowow
My Company is in talks with Bitmain about S2
So far is sounding very good Give it some time Bitmain will release the good news and sexy design
Speaking to a supplier in China who buys from Bitmain local production facility said it's top secret project but has been hinted that there will be 2 models released 1Th/s and a 2Th/s model.
As always this is speculation but I can imagine this will be the case due to keep up with difficulty and other competitors.
If going by the other results of the U2 Bitmain will release details a week today and following sales that week for dispatch on the 31st to go in line with the U2
As always this is speculation but I can imagine this will be the case due to keep up with difficulty and other competitors.
If going by the other results of the U2 Bitmain will release details a week today and following sales that week for dispatch on the 31st to go in line with the U2
Will be great if they'll be able to keep the power consumption below 1w/ghash
Speaking to a supplier in China who buys from Bitmain local production facility said it's top secret project but has been hinted that there will be 2 models released 1Th/s and a 2Th/s model.
As always this is speculation but I can imagine this will be the case due to keep up with difficulty and other competitors.
If going by the other results of the U2 Bitmain will release details a week today and following sales that week for dispatch on the 31st to go in line with the U2
As always this is speculation but I can imagine this will be the case due to keep up with difficulty and other competitors.
If going by the other results of the U2 Bitmain will release details a week today and following sales that week for dispatch on the 31st to go in line with the U2
for S2
0.5W/Ghs
750 Ghs
price about 3.5btc/pcs
0.5W/Ghs
750 Ghs
price about 3.5btc/pcs
My guess is that sushi will come to your house and configure the S2 so it will actually produce physical bitcoins 
BITMAIN has the POWER
BITMAIN has the POWER+1
The S2 will be better than the S1 and I already want one. That's my speculation.
My guess is that sushi will come to your house and configure the S2 so it will actually produce physical bitcoins BITMAIN has the POWER
BITMAIN has the POWER 
The difference between the S1 and S2 could be similar to the difference between the U1 and U2. Same chip but with hardware and software based optimizations to improve performance.
Yeah thats what Im willin to bet on. Same chip, optimized hardware around them and perhaps more chips.... =)
Would be nice if VRM's were beefier and voltage control could be done easily =)
i want antminer S1/s2 who care 180 gh for 100-300$ pcs
The difference between the S1 and S2 could be similar to the difference between the U1 and U2. Same chip but with hardware and software based optimizations to improve performance.
Yeah thats what Im willin to bet on. Same chip, optimized hardware around them and perhaps more chips.... =)
Would be nice if VRM's were beefier and voltage control could be done easily =)
I wish I could buy a 1TH Dragon for $3255 plus shipping right now! I would buy several at that price.
Ditto.
http://www.alibaba.com/product-detail/1-TH-s-SHA256-Bitcoin-miner_1682627228.html
Jump to: