ANTMINER S4 Discussion and Support Thread - page 139.

MyRig

donator

Activity: 792

Merit: 510

If you are on windows, you can use a free SSH via GUI

http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html

Type in the IP address of your Antminer, then username root, password admin

*Please BE VERY CAREFUL as you will have full ROOT access and any unintended modification may make the miner not hash. You can always restore the changes by re-imaging the microSD card with the factory stock image on http://www.bitmaintech.com support page.

Quote from: Prelude on October 03, 2014, 06:00:40 PM

Quote from: dkaufman on October 03, 2014, 05:58:12 PM

Quote from: manitu on October 03, 2014, 04:06:28 PM

Does anyone know what username and password could I use for SSH access to S4? The device is freezed but SSH is live.
Thx.

ssh username is root, and the password for the S4 is "admin"

I've been ssh'ed into mine. Contemplating upgrading cgminer myself... Dare I? The author posted an ant miner-patched version and instructions (well, for the S3 I think)...

I suck at Linux, but I'd like to ssh into a few of my miners to see what's going on behind the curtains. How would I go about seeing cgminer once I'm connected?

Edit: Gave screen -r a try and that worked. Any other tricks I should know? Tried the same on an Innosilicon A2 Terminator, but it isn't the right command.

heslo

legendary

Activity: 1202

Merit: 1181

Quote from: ?? on ??

Quote from: MyRig on October 03, 2014, 04:48:17 PM

If you believe the item was defective, you can return the miner to the following address immediately without obtaining the prior authorization, however, if the device is not under warranty or turned out to be a mis-diagnosed unit, there will be a return shipping fee and diagnostic fee be billed to you before the package be send out...

Bitmain Warranty
3700 Quebec Street #100239
Denver, Colorado 80207
USA

Telephone: +1-844-248-6246

Average Turn Around Time for non-preauthorized RMA, be 2-3 business days before it is send out.

Required printed Bitmaintech.com order confirmation page and brief description of what is wrong with the unit. (Please make sure to include a phone number and e-mail address, so one of the techs can reach you if they have questions)

* WARRANTY IS EXCHANGE TO A FUNCTIONING ITEM ONLY. THERE WILL BE NO REFUND.

Quote from: FUBAR-BDHR on October 03, 2014, 04:07:06 PM

Quote from: IYFTech on October 03, 2014, 03:58:40 PM

Quote from: GWilkiejr on October 03, 2014, 03:42:45 PM

Bitmain - Every hour we're down we're losing money. What is your ETA on getting us the new firmware???

Based on their previous record - about 7+ weeks........

Is that before or after the the 2 months of sending screenshots to convince them there is an issue?

Who are you? Your number is plastered all of the internet for all manner of things.

I'll tell you who they are... look at the address, belongs to the con artists at MinerSource

seriouscoin

hero member

Activity: 658

Merit: 500

Quote from: Prelude on October 03, 2014, 06:18:30 PM

Quote from: seriouscoin on October 03, 2014, 06:17:25 PM

Quote from: Prelude on October 03, 2014, 06:00:40 PM

Quote from: dkaufman on October 03, 2014, 05:58:12 PM

Quote from: manitu on October 03, 2014, 04:06:28 PM

Does anyone know what username and password could I use for SSH access to S4? The device is freezed but SSH is live.
Thx.

ssh username is root, and the password for the S4 is "admin"

I've been ssh'ed into mine. Contemplating upgrading cgminer myself... Dare I? The author posted an ant miner-patched version and instructions (well, for the S3 I think)...

I suck at Linux, but I'd like to ssh into a few of my miners to see what's going on behind the curtains. How would I go about seeing cgminer once I'm connected?

Edit: Gave screen -r a try and that worked. Any other tricks I should know? Tried the same on an Innosilicon A2 Terminator, but it isn't the right command.

send me btc and i will tell you.....

Address?

1QAHVyRzkmD4j1pU5W89htZ3c6D6E7iWDs
Look and see how many "donations" i got.

Prelude

legendary

Activity: 1596

Merit: 1000

Quote from: seriouscoin on October 03, 2014, 06:17:25 PM

Quote from: Prelude on October 03, 2014, 06:00:40 PM

Quote from: dkaufman on October 03, 2014, 05:58:12 PM

Quote from: manitu on October 03, 2014, 04:06:28 PM

Does anyone know what username and password could I use for SSH access to S4? The device is freezed but SSH is live.
Thx.

ssh username is root, and the password for the S4 is "admin"

I've been ssh'ed into mine. Contemplating upgrading cgminer myself... Dare I? The author posted an ant miner-patched version and instructions (well, for the S3 I think)...

I suck at Linux, but I'd like to ssh into a few of my miners to see what's going on behind the curtains. How would I go about seeing cgminer once I'm connected?

Edit: Gave screen -r a try and that worked. Any other tricks I should know? Tried the same on an Innosilicon A2 Terminator, but it isn't the right command.

send me btc and i will tell you.....

Address?

seriouscoin

hero member

Activity: 658

Merit: 500

Quote from: Prelude on October 03, 2014, 06:00:40 PM

Quote from: dkaufman on October 03, 2014, 05:58:12 PM

Quote from: manitu on October 03, 2014, 04:06:28 PM

Does anyone know what username and password could I use for SSH access to S4? The device is freezed but SSH is live.
Thx.

ssh username is root, and the password for the S4 is "admin"

I've been ssh'ed into mine. Contemplating upgrading cgminer myself... Dare I? The author posted an ant miner-patched version and instructions (well, for the S3 I think)...

I suck at Linux, but I'd like to ssh into a few of my miners to see what's going on behind the curtains. How would I go about seeing cgminer once I'm connected?

Edit: Gave screen -r a try and that worked. Any other tricks I should know? Tried the same on an Innosilicon A2 Terminator, but it isn't the right command.

send me btc and i will tell you.....

Prelude

legendary

Activity: 1596

Merit: 1000

Quote from: dkaufman on October 03, 2014, 05:58:12 PM

Quote from: manitu on October 03, 2014, 04:06:28 PM

Does anyone know what username and password could I use for SSH access to S4? The device is freezed but SSH is live.
Thx.

ssh username is root, and the password for the S4 is "admin"

I've been ssh'ed into mine. Contemplating upgrading cgminer myself... Dare I? The author posted an ant miner-patched version and instructions (well, for the S3 I think)...

I suck at Linux, but I'd like to ssh into a few of my miners to see what's going on behind the curtains. How would I go about seeing cgminer once I'm connected?

Edit: Gave screen -r a try and that worked. Any other tricks I should know? Tried the same on an Innosilicon A2 Terminator, but it isn't the right command.

dkaufman

member

Activity: 84

Merit: 10

Quote from: manitu on October 03, 2014, 04:06:28 PM

Does anyone know what username and password could I use for SSH access to S4? The device is freezed but SSH is live.
Thx.

ssh username is root, and the password for the S4 is "admin"

I've been ssh'ed into mine. Contemplating upgrading cgminer myself... Dare I? The author posted an ant miner-patched version and instructions (well, for the S3 I think)...

ImogenV

newbie

Activity: 24

Merit: 0

Is there a Dogie's miner setup guide for the S4?

Prelude

legendary

Activity: 1596

Merit: 1000

Quote from: MyRig on October 03, 2014, 04:48:17 PM

If you believe the item was defective, you can return the miner to the following address immediately without obtaining the prior authorization, however, if the device is not under warranty or turned out to be a mis-diagnosed unit, there will be a return shipping fee and diagnostic fee be billed to you before the package be send out...

Bitmain Warranty
3700 Quebec Street #100239
Denver, Colorado 80207
USA

Telephone: +1-844-248-6246

Average Turn Around Time for non-preauthorized RMA, be 2-3 business days before it is send out.

Required printed Bitmaintech.com order confirmation page and brief description of what is wrong with the unit. (Please make sure to include a phone number and e-mail address, so one of the techs can reach you if they have questions)

* WARRANTY IS EXCHANGE TO A FUNCTIONING ITEM ONLY. THERE WILL BE NO REFUND.

Quote from: FUBAR-BDHR on October 03, 2014, 04:07:06 PM

Quote from: IYFTech on October 03, 2014, 03:58:40 PM

Quote from: GWilkiejr on October 03, 2014, 03:42:45 PM

Bitmain - Every hour we're down we're losing money. What is your ETA on getting us the new firmware???

Based on their previous record - about 7+ weeks........

Is that before or after the the 2 months of sending screenshots to convince them there is an issue?

Would you happen to have access to a beta of the upcoming firmware?

xstr8guy

hero member

Activity: 784

Merit: 1004

Glow Stick Dance!

Quote from: IYFTech on October 02, 2014, 09:58:21 PM

Quote from: daddyfatsax on October 02, 2014, 09:46:21 PM

Quote from: sjc1490 on October 02, 2014, 09:43:35 PM

I held back because of price but that looks as if it is the least of the S4's problems. Hope for Bitmain these are just isolated incidents,

Same here. I have never had an issue with any of my old S1's or current S3's. Something about Bitmain making big miners seems to mess everything up.

At least the S2's worked.......once you'd re-assembled them.......sort of........ Cheesy

And replaced the underpowered, crappy Enermax PSU with a good one. Wink

Prelude

legendary

Activity: 1596

Merit: 1000

Quote from: seriouscoin on October 03, 2014, 03:44:18 PM

Quote from: Prelude on October 03, 2014, 09:47:49 AM

Quote from: IYFTech on October 03, 2014, 08:34:37 AM

Quote from: Prelude on October 03, 2014, 08:28:39 AM

Well, I'd rather have a buggy unit ASAP as opposed to having them test them and drive the difficulty up in the process before I get my miners. To be honest when it works it works very well. Happy to have it so quickly after ordering.

Well, I'm happy you're happy

Myself, for that price, I'd prefer not to be treated like a guinea pig beta tester on a miner that might work on certain pools if I'm lucky while hoping my hash power is going where it's supposed to go...... Wink

Hindsight and all that jazz. Here's hoping by the time/if you decide to buy one you'll get a bug free miner.

What? no dumb fck. lots of ppl here already warned you. But you're too stupid to see.... dont call it hindsight, retard.

If you're too dumb to understand what we're talking about, you should refrain from posting.

hobbymd

sr. member

Activity: 259

Merit: 250

Quote from: ?? on ??

Quote from: MyRig on October 03, 2014, 04:48:17 PM

If you believe the item was defective, you can return the miner to the following address immediately without obtaining the prior authorization, however, if the device is not under warranty or turned out to be a mis-diagnosed unit, there will be a return shipping fee and diagnostic fee be billed to you before the package be send out...

Bitmain Warranty
3700 Quebec Street #100239
Denver, Colorado 80207
USA

Telephone: +1-844-248-6246

Average Turn Around Time for non-preauthorized RMA, be 2-3 business days before it is send out.

Required printed Bitmaintech.com order confirmation page and brief description of what is wrong with the unit. (Please make sure to include a phone number and e-mail address, so one of the techs can reach you if they have questions)

* WARRANTY IS EXCHANGE TO A FUNCTIONING ITEM ONLY. THERE WILL BE NO REFUND.

Quote from: FUBAR-BDHR on October 03, 2014, 04:07:06 PM

Quote from: IYFTech on October 03, 2014, 03:58:40 PM

Quote from: GWilkiejr on October 03, 2014, 03:42:45 PM

Bitmain - Every hour we're down we're losing money. What is your ETA on getting us the new firmware???

Based on their previous record - about 7+ weeks........

Is that before or after the the 2 months of sending screenshots to convince them there is an issue?

Who are you? Your number is plastered all of the internet for all manner of things.

That phone number and the address belongs to Bitmain's support @ North America . The reason I know is because I had to RMA a s3+ blade from my batch 9 since it stopped working shortly after I received the miner.
Nonetheless , my RMA process went very smooth since I got the replacement blade at my door in less than 2 Days. I would recommend anybody needs RMA support call that phone number (they also have one for EU but I can't remember the number) you'll get much quicker result instead of trying to contact bitmain on this forum.

chipxtreme

newbie

Activity: 34

Merit: 0

I've got a $200 S4 coupon for sale. BTC0.15

MyRig

donator

Activity: 792

Merit: 510

[email protected]

If you believe the item was defective, you can return the miner to the following address immediately without obtaining the prior authorization, however, if the device is not under warranty or turned out to be a mis-diagnosed unit, there will be a return shipping fee and diagnostic fee be billed to you before the package be send out...

Bitmain Warranty
3700 Quebec Street #100239
Denver, Colorado 80207
USA

Telephone: +1-844-248-6246

Average Turn Around Time for non-preauthorized RMA, be 2-3 business days before it is send out.

Required printed Bitmaintech.com order confirmation page and brief description of what is wrong with the unit. (Please make sure to include a phone number and e-mail address, so one of the techs can reach you if they have questions)

* WARRANTY IS EXCHANGE TO A FUNCTIONING ITEM ONLY. THERE WILL BE NO REFUND.

Quote from: FUBAR-BDHR on October 03, 2014, 04:07:06 PM

Quote from: IYFTech on October 03, 2014, 03:58:40 PM

Quote from: GWilkiejr on October 03, 2014, 03:42:45 PM

Bitmain - Every hour we're down we're losing money. What is your ETA on getting us the new firmware???

Based on their previous record - about 7+ weeks........

Is that before or after the the 2 months of sending screenshots to convince them there is an issue?

MyRig

donator

Activity: 792

Merit: 510

[email protected]

To Factory Reset S4, please try using the reset button!!

Quote from: manitu on October 03, 2014, 04:06:28 PM

Does anyone know what username and password could I use for SSH access to S4? The device is freezed but SSH is live.
Thx.

manitu

newbie

Activity: 22

Merit: 0

Quote from: suchmoon on October 03, 2014, 04:26:12 PM

Quote from: Swimmer63 on October 03, 2014, 04:18:16 PM

Quote from: suchmoon on October 03, 2014, 04:09:35 PM

Quote from: manitu on October 03, 2014, 04:06:28 PM

Does anyone know what username and password could I use for SSH access to S4? The device is freezed but SSH is live.
Thx.

Try root/admin. That's for S2, I don't have S4 but maybe it's the same.

Same as you need to get into the GUI. They are usually root, root for Bitmain products. Unless you changed the password.

That's only true for S1 and S3, but S2 has root/admin for SSH and root/root for GUI. Yes, I just verified that on all three.

Thx people, but device is absolutely down. I am so far from device that I will do hard reset tomorrow.
I tried root/root, combination with bitmain and antminer, but all was wrong. I dont understand why bitmain changed root account. Maybe they want something to hide Shocked

seriouscoin

hero member

Activity: 658

Merit: 500

Quote from: suchmoon on October 03, 2014, 04:07:51 PM

Quote from: seriouscoin on October 03, 2014, 03:44:18 PM

What? no dumb fck. I'm 8 years old and recently learned bad words so cool LOL. lots of ppl here already warned you. But you're too stupid to see.... dont call it hindsight, retard.

Are you serious?

How cute, edited someones quote.... did you just pass 3rd grade?

Go back to your "investment" and dont fcking cry when it didnt work out. Calling you stupid would be an insult to many other idiots in here.

suchmoon

legendary

Activity: 3654

Merit: 8909

https://bpip.org

Quote from: Swimmer63 on October 03, 2014, 04:18:16 PM

Quote from: suchmoon on October 03, 2014, 04:09:35 PM

Quote from: manitu on October 03, 2014, 04:06:28 PM

Does anyone know what username and password could I use for SSH access to S4? The device is freezed but SSH is live.
Thx.

Try root/admin. That's for S2, I don't have S4 but maybe it's the same.

Same as you need to get into the GUI. They are usually root, root for Bitmain products. Unless you changed the password.

That's only true for S1 and S3, but S2 has root/admin for SSH and root/root for GUI. Yes, I just verified that on all three.

Swimmer63

legendary

Activity: 1593

Merit: 1004

Quote from: suchmoon on October 03, 2014, 04:09:35 PM

Quote from: manitu on October 03, 2014, 04:06:28 PM

Does anyone know what username and password could I use for SSH access to S4? The device is freezed but SSH is live.
Thx.

Try root/admin. That's for S2, I don't have S4 but maybe it's the same.

Same as you need to get into the GUI. They are usually root, root for Bitmain products. Unless you changed the password.

suchmoon

legendary

Activity: 3654

Merit: 8909

https://bpip.org

Quote from: manitu on October 03, 2014, 04:06:28 PM

Does anyone know what username and password could I use for SSH access to S4? The device is freezed but SSH is live.
Thx.

Try root/admin. That's for S2, I don't have S4 but maybe it's the same.

Topic: ANTMINER S4 Discussion and Support Thread - page 139. (Read 301481 times)