Bitcoin Forum>Bitcoin>Mining>Mining support
Author

Topic: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15 (Read 317 times)

eotrix
jr. member
Activity: 60
Merit: 1
Antminer S9 - 63 Asic but does not hash also Temp fixed at 15
December 12, 2019, 06:32:24 AM
#16
Alright sorry then. I can call this one is fixed since LPM has worked and will use Braiins OS as BitMaxz suggested.
mikeywith
legendary
Activity: 2394
Merit: 6581
be constructive or S.T.F.U
Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15
December 11, 2019, 10:53:27 AM
#15
Quote from: eotrix on December 11, 2019, 08:02:47 AM

Can we keep this topic for only the problem in the OP and start a new topic regarding the other board with the PIC error?

It is not that threads have limited post count or something, but for the sake of staying on topic as well as focusing on one issue at the time,  and obvoiusly to keep the forum as "tiday" as possible.
BitMaxz
legendary
Activity: 3374
Merit: 3095
Playbet.io - Crypto Casino and Sportsbook
Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15
December 11, 2019, 09:02:55 AM
#14
If you are getting PIC firmware version error or the result is different something like this below

Working pic

Code:
chain [1] PIC jump to app
Check chain [1] PIC fw version = 0x03 (or other)

Bad pic

Code:
chain [1] PIC jump to app
Check chain [1] PIC fw version = 0x00 or 0xff

the only solution for this is to flash it with Pickit 3 we have a guide here on the forum how to do that.

Check this guide from here "repair a T9 + after a bad firmware (lost chain)"

The method is for t9+ but you can follow it as a guide to backup the hex file from working hashboard and flash the working hex to the other board that has PIC error.
eotrix
jr. member
Activity: 60
Merit: 1
Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15
December 11, 2019, 08:02:47 AM
#13
No its not the middle board, its the last one you know what I mean. I will lower it gradually, I thought same about that. Its not a bad solution 3,5 is still great. I also have another with PIC error in kernel, will try pickit 3 but no idea how^^. Guides on the internet are not so clear.
mikeywith
legendary
Activity: 2394
Merit: 6581
be constructive or S.T.F.U
Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15
December 10, 2019, 05:54:51 PM
#12
Quote from: eotrix on December 10, 2019, 07:30:28 AM
THe 3rd board is hashing with lower power mode but this way it still hashes 9Th total due to LPM. Does it happen because the board is about to die?

Yes , it's likely going to die, there is no point in lowering frequency on each chip , you won't even know which one is bad, what you want is lower the frequency or/and increase the voltage of the bad board ( all 63 chips ) , use Braiins OS , using default frequency you should get 4.5th on each board (assuming the miner is 13.5th) and then by lowering the frequency of the bad board you should get 3.5th or so , so you will end up with

4.5+4.5+3.5 = 12.5th which isn't bad, you can also try to squeeze a bit more hashrate of that bad board, what you want to do is lower the frequency gradually until you find the best value for the board.

By the way , is this the middle board you having an issue with ?
eotrix
jr. member
Activity: 60
Merit: 1
Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15
December 10, 2019, 04:50:16 PM
#11
I will check them if they are free. Maybe per board also work for me.

Edit. They both have Dev fee but I can still just test one to see if I can do what I think. They dont have a guide to run the firmware from SD card since the latest Bitmain fw wont allow us to downgrade or change the fw with interface.
PassThePopcorn
sr. member
Activity: 463
Merit: 309
Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15
December 10, 2019, 09:15:10 AM
#10
I don't believe braiins does, they do a per board but unless it's changed not per chip.

vnish and asicseer do this though.
eotrix
jr. member
Activity: 60
Merit: 1
Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15
December 10, 2019, 07:30:28 AM
#9
Tomorrow I will make a cleaning for the deviceboards and follow what you suggested. I will let you know the results.
ANOTHER UPDATE
THe 3rd board is hashing with lower power mode but this way it still hashes 9Th total due to LPM. Does it happen because the board is about to die? One chip fails to hash with high frequency?

Does braiins OS have option to adjust frequency of EACH chips?
mikeywith
legendary
Activity: 2394
Merit: 6581
be constructive or S.T.F.U
Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15
December 09, 2019, 06:10:21 PM
#8
Quote from: eotrix on December 09, 2019, 07:12:56 AM
As I notice temp reads are being done on 62 chip(which could be the last chip aswell) so if temp read fails, can we say its most probably the last chip might cause that?

62th chip is indeed the last chip, first chip is 0 ,  nonetheless, this should not stop the hash board from hashing, I have no technical explanation to back my statement with, but from personal experience, I do have boards which work perfectly without a working temp-sensor,  some show 15 some show -- , it doesn't matter they all work just fine.

here is what I would try

1- Flash a different firmware, it doesn't matte if it's Bitmain or something else.
2- Unplug the other 2 boards and try the bad board alone , swap the data cable from a good board to this bad one.
3- inspect the board for physical damage or loose heat-sinks.
BitMaxz
legendary
Activity: 3374
Merit: 3095
Playbet.io - Crypto Casino and Sportsbook
Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15
December 09, 2019, 05:14:05 PM
#7
Have you tried the miner with Braiins OS to bypass the "temp check"?

Much better to try it first in Braiins OS to test and troubleshoot the issue then flash it back with bitmain firmware. So that you can find the issue if the issue is the temp sensor or the ASIC chips.
eotrix
jr. member
Activity: 60
Merit: 1
Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15
December 09, 2019, 07:12:56 AM
#6
As I notice temp reads are being done on 62 chip(which could be the last chip aswell) so if temp read fails, can we say its most probably the last chip might cause that?
lightfoot
legendary
Activity: 3164
Merit: 2258
I fix broken miners. And make holes in teeth :-)
Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15
December 05, 2019, 07:10:45 AM
#5
In this particular case most probably. S9's are really into reading the local temps and adjusting the clock/hash/fans accordingly to keep the chips from melting off the unit. It's a safety thing (and a good one IMO). The right fix would be to find the flaked chip and replace but if BrainnOS can tell you which chip isn't responding and turn off the alert for that chip the rest of them would probably be accurate enough to hash away.
eotrix
jr. member
Activity: 60
Merit: 1
Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15
December 05, 2019, 05:24:45 AM
#4
Low power mode did not help. I can try Braiins OS but does it happen because of temp reading failing?
BitMaxz
legendary
Activity: 3374
Merit: 3095
Playbet.io - Crypto Casino and Sportsbook
Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15
December 04, 2019, 05:08:04 PM
#3
As the above said your problem about is the temp sensor with this error  below:

Code:
Read temp failed, set fixed full fan speed

And the miner frequency is set to 700 which is high.

If you are using the latest firmware version of antminer s9 try to run it at "low power mode" you can find it under “Miner Configuration” in working mode.

If the low power mode doesn't work try to run it with Braiins OS to bypass the temp check.
lightfoot
legendary
Activity: 3164
Merit: 2258
I fix broken miners. And make holes in teeth :-)
Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15
December 04, 2019, 01:27:15 PM
#2
Possible the temp sensor in the chip failed. I wonder what they use to sense temps on die.
eotrix
jr. member
Activity: 60
Merit: 1
Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15
December 04, 2019, 06:41:45 AM
#1
The other 2 boards are working just fine but this one shows 63 asic yet does not hash. Any idea why it might be? Anyone experienced that?
Here is full kernel

Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 27800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 258048
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map e6fd8000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 496 pages used for memmap
[    0.000000]   HighMem zone: 63488 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256528
[    0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 884108K/1032192K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 148084K reserved, 253952K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to f0004000
[    0.000000] zynq_clock_init: clkc starts at f0004100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000291] ps7-ttc #0 at f0006000, irq=43
[    0.000595] Console: colour dummy device 80x30
[    0.000631] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090242] pid_max: default: 32768 minimum: 301
[    0.090456] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.090476] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.092664] CPU: Testing write buffer coherency: ok
[    0.092999] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.093059] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.093280] L310 cache controller enabled
[    0.093300] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.170985] CPU1: Booted secondary processor
[    0.260218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260347] Brought up 2 CPUs
[    0.260365] SMP: Total of 2 processors activated.
[    0.260374] CPU: All CPU(s) started in SVC mode.
[    0.261036] devtmpfs: initialized
[    0.263465] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.264662] regulator-dummy: no parameters
[    0.272068] NET: Registered protocol family 16
[    0.274254] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.276519] cpuidle: using governor ladder
[    0.276532] cpuidle: using governor menu
[    0.283891] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.285398] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.285411] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.285522] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[    0.307003] bio: create slab  at 0
[    0.308383] vgaarb: loaded
[    0.309071] SCSI subsystem initialized
[    0.309949] usbcore: registered new interface driver usbfs
[    0.310127] usbcore: registered new interface driver hub
[    0.310675] usbcore: registered new device driver usb
[    0.312106] media: Linux media interface: v0.10
[    0.312268] Linux video capture interface: v2.00
[    0.312516] pps_core: LinuxPPS API ver. 1 registered
[    0.312528] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.312649] PTP clock support registered
[    0.313000] EDAC MC: Ver: 3.0.0
[    0.314203] Advanced Linux Sound Architecture Driver Initialized.
[    0.316932] DMA-API: preallocated 4096 debug entries
[    0.316946] DMA-API: debugging enabled by kernel config
[    0.317019] Switched to clocksource arm_global_timer
[    0.336541] NET: Registered protocol family 2
[    0.337277] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.337372] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.337531] TCP: Hash tables configured (established 8192 bind 8192)
[    0.337591] TCP: reno registered
[    0.337610] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.337662] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.337921] NET: Registered protocol family 1
[    0.338277] RPC: Registered named UNIX socket transport module.
[    0.338289] RPC: Registered udp transport module.
[    0.338298] RPC: Registered tcp transport module.
[    0.338306] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.338318] PCI: CLS 0 bytes, default 64
[    0.338759] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.340767] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.342084] bounce pool size: 64 pages
[    0.342953] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.343151] msgmni has been set to 1486
[    0.343920] io scheduler noop registered
[    0.343933] io scheduler deadline registered
[    0.343979] io scheduler cfq registered (default)
[    0.353731] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.353751] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.477458] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.049505] console [ttyPS0] enabled
[    1.053779] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[    1.061402] [drm] Initialized drm 1.1.0 20060810
[    1.078372] brd: module loaded
[    1.087766] loop: module loaded
[    1.097222] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.102974] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.110952] libphy: XEMACPS mii bus: probed
[    1.115318] ------------- phy_id = 0x3625e62
[    1.120355] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.129172] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.135786] ehci-pci: EHCI PCI platform driver
[    1.143023] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.149854] usbcore: registered new interface driver usb-storage
[    1.156694] mousedev: PS/2 mouse device common for all mice
[    1.162809] i2c /dev entries driver
[    1.169783] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.175263] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.181182] Xilinx Zynq CpuIdle Driver started
[    1.186023] sdhci: Secure Digital Host Controller Interface driver
[    1.192256] sdhci: Copyright(c) Pierre Ossman
[    1.196527] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.203353] mmc0: no vqmmc regulator found
[    1.207392] mmc0: no vmmc regulator found
[    1.247062] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.255745] usbcore: registered new interface driver usbhid
[    1.261257] usbhid: USB HID core driver
[    1.265971] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.272274] nand: Micron MT29F2G08ABAEAWP
[    1.276239] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.282193] Bad block table found at page 131008, version 0x01
[    1.288416] Bad block table found at page 130944, version 0x01
[    1.294469] 3 ofpart partitions found on MTD device pl353-nand
[    1.300258] Creating 3 MTD partitions on "pl353-nand":
[    1.305346] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.313400] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.320716] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.331443] TCP: cubic registered
[    1.334681] NET: Registered protocol family 17
[    1.339390] Registering SWP/SWPB emulation handler
[    1.345285] regulator-dummy: disabling
[    1.349626] UBI: attaching mtd1 to ubi0
[    1.876202] UBI: scanning is finished
[    1.887833] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.894888] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.901677] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.908360] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.915198] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.921208] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.928319] UBI: max/mean erase counter: 65/32, WL threshold: 4096, image sequence number: 267830735
[    1.937436] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.946633] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.946638] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.950626] ALSA device list:
[    1.950630]   No soundcards found.
[    1.966943] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    2.029818] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.035745] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.044887] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.054765] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.059803] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 68024B66-D002-4EAC-85B6-9A9AE3C1123E, small LPT model
[    2.071091] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.078064] devtmpfs: mounted
[    2.081170] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.938420] random: dd urandom read with 1 bits of entropy available
[    3.347056] 
[    3.347056] bcm54xx_config_init
[    4.457066] 
[    4.457066] bcm54xx_config_init
[    7.457899] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.463990] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   21.769153] In axi fpga driver!
[   21.772222] request_mem_region OK!
[   21.775617] AXI fpga dev virtual address is 0xf0200000
[   21.780754] *base_vir_addr = 0xc51e
[   21.795601] In fpga mem driver!
[   21.798936] request_mem_region OK!
[   21.802447] fpga mem virtual address is 0xf3000000
[   22.596430] 
[   22.596430] bcm54xx_config_init
[   23.676321] 
[   23.676321] bcm54xx_config_init
[   26.676891] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   26.682905] xemacps e000b000.ps7-ethernet: link up (100/FULL)
log_level = 4
This is XILINX board. Totalram:       1039753216
Detect 1GB control board of XILINX
mmap axi_fpga_addr = 0xb6fc7000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5dc0000
forceFreq=-1 forceFlag=0
min work minertest[0]:912


DETECT HW version=0000c51e
miner ID : 801c0c012c00885c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[4] has core num=3
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[1] has core num=4
Chain[6] ASIC[3] has core num=15
Chain[6] ASIC[4] has core num=1
Chain[6] ASIC[15] has core num=2
Chain[6] ASIC[22] has core num=15
Chain[6] ASIC[57] has core num=1
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[17] has core num=1
Chain[7] ASIC[22] has core num=1
Chain[7] ASIC[45] has core num=15
Chain[7] ASIC[50] has core num=15
Chain[7] ASIC[54] has core num=2
Chain[7] ASIC[60] has core num=2
Chain[7] ASIC[62] has core num=2
Check chain[7] PIC fw version=0x03
get PIC voltage=74 on chain[5], value=900
get PIC voltage=74 on chain[6], value=900
get PIC voltage=74 on chain[7], value=900
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
total_exist_chain_num = 3
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 3, total chain num = 3 
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1805 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Fri May 31 10:59:27 CST 2019 type: Antminer S9
miner ID : 801c0c012c00885c
Checking fans...
get fan[4] speed=6120
get fan[4] speed=6120
get fan[5] speed=4200
get fan[4] speed=6120
get fan[5] speed=4200
get fan[4] speed=6120
get fan[5] speed=4200
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x00 0x47 0x00 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x01 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x09 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
No scan based on domain
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x00 0x4a 0x00 0x4a 0x04 0x4a 0x0a 0x4a 0x00 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x01 0x4a 0x01 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x05 0x4a 0x09 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=890
No scan based on domain
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x00 0x4a 0x00 0x4a 0x04 0x4a 0x0a 0x4a 0x00 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x01 0x4a 0x01 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x05 0x4a 0x09 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
No scan based on domain
Check chain[7] PIC fw version=0x03
total_exist_chain_num = 3
Chain[J6] original vol value=890 adjusted vol value:890
Chain[J6] orignal chain_voltage_pic=74 value=900
Chain[J6] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=900
Chain[J6] will use backup chain_voltage_pic=890 [91]
Chain[J6] get working chain_voltage_pic=91
Chain[J6] Aisc[00] original freq=631 adjusted freq:681
Chain[J6] Aisc[01] original freq=631 adjusted freq:681
Chain[J6] Aisc[02] original freq=631 adjusted freq:681
Chain[J6] Aisc[03] original freq=631 adjusted freq:681
Chain[J6] Aisc[04] original freq=631 adjusted freq:681
Chain[J6] Aisc[05] original freq=631 adjusted freq:681
Chain[J6] Aisc[06] original freq=631 adjusted freq:681
Chain[J6] Aisc[07] original freq=631 adjusted freq:681
Chain[J6] Aisc[08] original freq=631 adjusted freq:681
Chain[J6] Aisc[09] original freq=631 adjusted freq:681
Chain[J6] Aisc[10] original freq=631 adjusted freq:681
Chain[J6] Aisc[11] original freq=631 adjusted freq:681
Chain[J6] Aisc[12] original freq=631 adjusted freq:681
Chain[J6] Aisc[13] original freq=631 adjusted freq:681
Chain[J6] Aisc[14] original freq=631 adjusted freq:681
Chain[J6] Aisc[15] original freq=631 adjusted freq:681
Chain[J6] Aisc[16] original freq=631 adjusted freq:681
Chain[J6] Aisc[17] original freq=631 adjusted freq:681
Chain[J6] Aisc[18] original freq=631 adjusted freq:681
Chain[J6] Aisc[19] original freq=631 adjusted freq:681
Chain[J6] Aisc[20] original freq=631 adjusted freq:681
Chain[J6] Aisc[21] original freq=631 adjusted freq:681
Chain[J6] Aisc[22] original freq=631 adjusted freq:681
Chain[J6] Aisc[23] original freq=631 adjusted freq:681
Chain[J6] Aisc[24] original freq=631 adjusted freq:681
Chain[J6] Aisc[25] original freq=631 adjusted freq:681
Chain[J6] Aisc[26] original freq=631 adjusted freq:681
Chain[J6] Aisc[27] original freq=631 adjusted freq:681
Chain[J6] Aisc[28] original freq=631 adjusted freq:681
Chain[J6] Aisc[29] original freq=631 adjusted freq:681
Chain[J6] Aisc[30] original freq=631 adjusted freq:681
Chain[J6] Aisc[31] original freq=631 adjusted freq:681
Chain[J6] Aisc[32] original freq=631 adjusted freq:681
Chain[J6] Aisc[33] original freq=631 adjusted freq:681
Chain[J6] Aisc[34] original freq=631 adjusted freq:681
Chain[J6] Aisc[35] original freq=631 adjusted freq:681
Chain[J6] Aisc[36] original freq=631 adjusted freq:681
Chain[J6] Aisc[37] original freq=631 adjusted freq:681
Chain[J6] Aisc[38] original freq=631 adjusted freq:681
Chain[J6] Aisc[39] original freq=631 adjusted freq:681
Chain[J6] Aisc[40] original freq=631 adjusted freq:681
Chain[J6] Aisc[41] original freq=631 adjusted freq:681
Chain[J6] Aisc[42] original freq=631 adjusted freq:681
Chain[J6] Aisc[43] original freq=631 adjusted freq:681
Chain[J6] Aisc[44] original freq=631 adjusted freq:681
Chain[J6] Aisc[45] original freq=631 adjusted freq:681
Chain[J6] Aisc[46] original freq=631 adjusted freq:681
Chain[J6] Aisc[47] original freq=631 adjusted freq:681
Chain[J6] Aisc[48] original freq=631 adjusted freq:681
Chain[J6] Aisc[49] original freq=631 adjusted freq:681
Chain[J6] Aisc[50] original freq=631 adjusted freq:681
Chain[J6] Aisc[51] original freq=631 adjusted freq:681
Chain[J6] Aisc[52] original freq=631 adjusted freq:681
Chain[J6] Aisc[53] original freq=631 adjusted freq:681
Chain[J6] Aisc[54] original freq=631 adjusted freq:681
Chain[J6] Aisc[55] original freq=631 adjusted freq:681
Chain[J6] Aisc[56] original freq=631 adjusted freq:681
Chain[J6] Aisc[57] original freq=631 adjusted freq:681
Chain[J6] Aisc[58] original freq=631 adjusted freq:681
Chain[J6] Aisc[59] original freq=631 adjusted freq:681
Chain[J6] Aisc[60] original freq=631 adjusted freq:681
Chain[J6] Aisc[61] original freq=631 adjusted freq:681
Chain[J6] Aisc[62] original freq=631 adjusted freq:681
Chain[J7] original vol value=890 adjusted vol value:890
Chain[J7] orignal chain_voltage_pic=74 value=900
Chain[J7] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=900
Chain[J7] will use backup chain_voltage_pic=890 [91]
Chain[J7] get working chain_voltage_pic=91
Chain[J7] Aisc[00] original freq=650 adjusted freq:700
Chain[J7] Aisc[01] original freq=650 adjusted freq:700
Chain[J7] Aisc[02] original freq=650 adjusted freq:700
Chain[J7] Aisc[03] original freq=650 adjusted freq:700
Chain[J7] Aisc[04] original freq=650 adjusted freq:700
Chain[J7] Aisc[05] original freq=650 adjusted freq:700
Chain[J7] Aisc[06] original freq=650 adjusted freq:700
Chain[J7] Aisc[07] original freq=650 adjusted freq:700
Chain[J7] Aisc[08] original freq=650 adjusted freq:700
Chain[J7] Aisc[09] original freq=650 adjusted freq:700
Chain[J7] Aisc[10] original freq=650 adjusted freq:700
Chain[J7] Aisc[11] original freq=650 adjusted freq:700
Chain[J7] Aisc[12] original freq=650 adjusted freq:700
Chain[J7] Aisc[13] original freq=650 adjusted freq:700
Chain[J7] Aisc[14] original freq=650 adjusted freq:700
Chain[J7] Aisc[15] original freq=650 adjusted freq:700
Chain[J7] Aisc[16] original freq=650 adjusted freq:700
Chain[J7] Aisc[17] original freq=650 adjusted freq:700
Chain[J7] Aisc[18] original freq=650 adjusted freq:700
Chain[J7] Aisc[19] original freq=650 adjusted freq:700
Chain[J7] Aisc[20] original freq=650 adjusted freq:700
Chain[J7] Aisc[21] original freq=650 adjusted freq:700
Chain[J7] Aisc[22] original freq=650 adjusted freq:700
Chain[J7] Aisc[23] original freq=650 adjusted freq:700
Chain[J7] Aisc[24] original freq=650 adjusted freq:700
Chain[J7] Aisc[25] original freq=650 adjusted freq:700
Chain[J7] Aisc[26] original freq=650 adjusted freq:700
Chain[J7] Aisc[27] original freq=650 adjusted freq:700
Chain[J7] Aisc[28] original freq=650 adjusted freq:700
Chain[J7] Aisc[29] original freq=650 adjusted freq:700
Chain[J7] Aisc[30] original freq=650 adjusted freq:700
Chain[J7] Aisc[31] original freq=650 adjusted freq:700
Chain[J7] Aisc[32] original freq=650 adjusted freq:700
Chain[J7] Aisc[33] original freq=650 adjusted freq:700
Chain[J7] Aisc[34] original freq=650 adjusted freq:700
Chain[J7] Aisc[35] original freq=650 adjusted freq:700
Chain[J7] Aisc[36] original freq=650 adjusted freq:700
Chain[J7] Aisc[37] original freq=650 adjusted freq:700
Chain[J7] Aisc[38] original freq=650 adjusted freq:700
Chain[J7] Aisc[39] original freq=650 adjusted freq:700
Chain[J7] Aisc[40] original freq=650 adjusted freq:700
Chain[J7] Aisc[41] original freq=650 adjusted freq:700
Chain[J7] Aisc[42] original freq=650 adjusted freq:700
Chain[J7] Aisc[43] original freq=650 adjusted freq:700
Chain[J7] Aisc[44] original freq=650 adjusted freq:700
Chain[J7] Aisc[45] original freq=650 adjusted freq:700
Chain[J7] Aisc[46] original freq=650 adjusted freq:700
Chain[J7] Aisc[47] original freq=650 adjusted freq:700
Chain[J7] Aisc[48] original freq=650 adjusted freq:700
Chain[J7] Aisc[49] original freq=650 adjusted freq:700
Chain[J7] Aisc[50] original freq=650 adjusted freq:700
Chain[J7] Aisc[51] original freq=650 adjusted freq:700
Chain[J7] Aisc[52] original freq=650 adjusted freq:700
Chain[J7] Aisc[53] original freq=650 adjusted freq:700
Chain[J7] Aisc[54] original freq=650 adjusted freq:700
Chain[J7] Aisc[55] original freq=650 adjusted freq:700
Chain[J7] Aisc[56] original freq=650 adjusted freq:700
Chain[J7] Aisc[57] original freq=650 adjusted freq:700
Chain[J7] Aisc[58] original freq=650 adjusted freq:700
Chain[J7] Aisc[59] original freq=650 adjusted freq:700
Chain[J7] Aisc[60] original freq=650 adjusted freq:700
Chain[J7] Aisc[61] original freq=650 adjusted freq:700
Chain[J7] Aisc[62] original freq=650 adjusted freq:700
Chain[J8] original vol value=890 adjusted vol value:890
Chain[J8] orignal chain_voltage_pic=74 value=900
Chain[J8] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=900
Chain[J8] will use backup chain_voltage_pic=890 [91]
Chain[J8] get working chain_voltage_pic=91
Chain[J8] Aisc[00] original freq=650 adjusted freq:700
Chain[J8] Aisc[01] original freq=650 adjusted freq:700
Chain[J8] Aisc[02] original freq=650 adjusted freq:700
Chain[J8] Aisc[03] original freq=650 adjusted freq:700
Chain[J8] Aisc[04] original freq=650 adjusted freq:700
Chain[J8] Aisc[05] original freq=650 adjusted freq:700
Chain[J8] Aisc[06] original freq=650 adjusted freq:700
Chain[J8] Aisc[07] original freq=650 adjusted freq:700
Chain[J8] Aisc[08] original freq=650 adjusted freq:700
Chain[J8] Aisc[09] original freq=650 adjusted freq:700
Chain[J8] Aisc[10] original freq=650 adjusted freq:700
Chain[J8] Aisc[11] original freq=650 adjusted freq:700
Chain[J8] Aisc[12] original freq=650 adjusted freq:700
Chain[J8] Aisc[13] original freq=650 adjusted freq:700
Chain[J8] Aisc[14] original freq=650 adjusted freq:700
Chain[J8] Aisc[15] original freq=650 adjusted freq:700
Chain[J8] Aisc[16] original freq=650 adjusted freq:700
Chain[J8] Aisc[17] original freq=650 adjusted freq:700
Chain[J8] Aisc[18] original freq=650 adjusted freq:700
Chain[J8] Aisc[19] original freq=650 adjusted freq:700
Chain[J8] Aisc[20] original freq=650 adjusted freq:700
Chain[J8] Aisc[21] original freq=650 adjusted freq:700
Chain[J8] Aisc[22] original freq=650 adjusted freq:700
Chain[J8] Aisc[23] original freq=650 adjusted freq:700
Chain[J8] Aisc[24] original freq=650 adjusted freq:700
Chain[J8] Aisc[25] original freq=650 adjusted freq:700
Chain[J8] Aisc[26] original freq=650 adjusted freq:700
Chain[J8] Aisc[27] original freq=650 adjusted freq:700
Chain[J8] Aisc[28] original freq=650 adjusted freq:700
Chain[J8] Aisc[29] original freq=650 adjusted freq:700
Chain[J8] Aisc[30] original freq=650 adjusted freq:700
Chain[J8] Aisc[31] original freq=650 adjusted freq:700
Chain[J8] Aisc[32] original freq=650 adjusted freq:700
Chain[J8] Aisc[33] original freq=650 adjusted freq:700
Chain[J8] Aisc[34] original freq=650 adjusted freq:700
Chain[J8] Aisc[35] original freq=650 adjusted freq:700
Chain[J8] Aisc[36] original freq=650 adjusted freq:700
Chain[J8] Aisc[37] original freq=650 adjusted freq:700
Chain[J8] Aisc[38] original freq=650 adjusted freq:700
Chain[J8] Aisc[39] original freq=650 adjusted freq:700
Chain[J8] Aisc[40] original freq=650 adjusted freq:700
Chain[J8] Aisc[41] original freq=650 adjusted freq:700
Chain[J8] Aisc[42] original freq=650 adjusted freq:700
Chain[J8] Aisc[43] original freq=650 adjusted freq:700
Chain[J8] Aisc[44] original freq=650 adjusted freq:700
Chain[J8] Aisc[45] original freq=650 adjusted freq:700
Chain[J8] Aisc[46] original freq=650 adjusted freq:700
Chain[J8] Aisc[47] original freq=650 adjusted freq:700
Chain[J8] Aisc[48] original freq=650 adjusted freq:700
Chain[J8] Aisc[49] original freq=650 adjusted freq:700
Chain[J8] Aisc[50] original freq=650 adjusted freq:700
Chain[J8] Aisc[51] original freq=650 adjusted freq:700
Chain[J8] Aisc[52] original freq=650 adjusted freq:700
Chain[J8] Aisc[53] original freq=650 adjusted freq:700
Chain[J8] Aisc[54] original freq=650 adjusted freq:700
Chain[J8] Aisc[55] original freq=650 adjusted freq:700
Chain[J8] Aisc[56] original freq=650 adjusted freq:700
Chain[J8] Aisc[57] original freq=650 adjusted freq:700
Chain[J8] Aisc[58] original freq=650 adjusted freq:700
Chain[J8] Aisc[59] original freq=650 adjusted freq:700
Chain[J8] Aisc[60] original freq=650 adjusted freq:700
Chain[J8] Aisc[61] original freq=650 adjusted freq:700
Chain[J8] Aisc[62] original freq=650 adjusted freq:700
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[4] has core num=3
Chain[J7] has core num in PIC
Chain[J7] ASIC[1] has core num=4
Chain[J7] ASIC[3] has core num=15
Chain[J7] ASIC[4] has core num=1
Chain[J7] ASIC[15] has core num=2
Chain[J7] ASIC[22] has core num=15
Chain[J7] ASIC[57] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[17] has core num=1
Chain[J8] ASIC[22] has core num=1
Chain[J8] ASIC[45] has core num=15
Chain[J8] ASIC[50] has core num=15
Chain[J8] ASIC[54] has core num=2
Chain[J8] ASIC[60] has core num=2
Chain[J8] ASIC[62] has core num=2
miner total rate=14613GH/s ideal_total_hash_rate = 14500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681 
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681 
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681 
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681 
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:681 Asic[36]:681 Asic[37]:681 Asic[38]:681 Asic[39]:681 
Asic[40]:681 Asic[41]:681 Asic[42]:681 Asic[43]:681 Asic[44]:681 Asic[45]:681 Asic[46]:681 Asic[47]:681 
Asic[48]:681 Asic[49]:681 Asic[50]:681 Asic[51]:681 Asic[52]:681 Asic[53]:681 Asic[54]:681 Asic[55]:681 
Asic[56]:681 Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681 
Chain:5 max freq=681
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=650
Asic[ 0]:700 Asic[ 1]:700 Asic[ 2]:700 Asic[ 3]:700 Asic[ 4]:700 Asic[ 5]:700 Asic[ 6]:700 Asic[ 7]:700 
Asic[ 8]:700 Asic[ 9]:700 Asic[10]:700 Asic[11]:700 Asic[12]:700 Asic[13]:700 Asic[14]:700 Asic[15]:700 
Asic[16]:700 Asic[17]:700 Asic[18]:700 Asic[19]:700 Asic[20]:700 Asic[21]:700 Asic[22]:700 Asic[23]:700 
Asic[24]:700 Asic[25]:700 Asic[26]:700 Asic[27]:700 Asic[28]:700 Asic[29]:700 Asic[30]:700 Asic[31]:700 
Asic[32]:700 Asic[33]:700 Asic[34]:700 Asic[35]:700 Asic[36]:700 Asic[37]:700 Asic[38]:700 Asic[39]:700 
Asic[40]:700 Asic[41]:700 Asic[42]:700 Asic[43]:700 Asic[44]:700 Asic[45]:700 Asic[46]:700 Asic[47]:700 
Asic[48]:700 Asic[49]:700 Asic[50]:700 Asic[51]:700 Asic[52]:700 Asic[53]:700 Asic[54]:700 Asic[55]:700 
Asic[56]:700 Asic[57]:700 Asic[58]:700 Asic[59]:700 Asic[60]:700 Asic[61]:700 Asic[62]:700 
Chain:6 max freq=700
Chain:6 min freq=700

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=650
Asic[ 0]:700 Asic[ 1]:700 Asic[ 2]:700 Asic[ 3]:700 Asic[ 4]:700 Asic[ 5]:700 Asic[ 6]:700 Asic[ 7]:700 
Asic[ 8]:700 Asic[ 9]:700 Asic[10]:700 Asic[11]:700 Asic[12]:700 Asic[13]:700 Asic[14]:700 Asic[15]:700 
Asic[16]:700 Asic[17]:700 Asic[18]:700 Asic[19]:700 Asic[20]:700 Asic[21]:700 Asic[22]:700 Asic[23]:700 
Asic[24]:700 Asic[25]:700 Asic[26]:700 Asic[27]:700 Asic[28]:700 Asic[29]:700 Asic[30]:700 Asic[31]:700 
Asic[32]:700 Asic[33]:700 Asic[34]:700 Asic[35]:700 Asic[36]:700 Asic[37]:700 Asic[38]:700 Asic[39]:700 
Asic[40]:700 Asic[41]:700 Asic[42]:700 Asic[43]:700 Asic[44]:700 Asic[45]:700 Asic[46]:700 Asic[47]:700 
Asic[48]:700 Asic[49]:700 Asic[50]:700 Asic[51]:700 Asic[52]:700 Asic[53]:700 Asic[54]:700 Asic[55]:700 
Asic[56]:700 Asic[57]:700 Asic[58]:700 Asic[59]:700 Asic[60]:700 Asic[61]:700 Asic[62]:700 
Chain:7 max freq=700
Chain:7 min freq=700


Miner fix freq ...
totalRate = 14613, fixed_totalRate = 14645
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681 
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681 
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681 
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681 
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:681 Asic[36]:681 Asic[37]:681 Asic[38]:681 Asic[39]:681 
Asic[40]:681 Asic[41]:681 Asic[42]:681 Asic[43]:681 Asic[44]:681 Asic[45]:681 Asic[46]:681 Asic[47]:681 
Asic[48]:681 Asic[49]:681 Asic[50]:681 Asic[51]:681 Asic[52]:681 Asic[53]:681 Asic[54]:681 Asic[55]:681 
Asic[56]:681 Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681 
Chain:5 max freq=681
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=650
Asic[ 0]:700 Asic[ 1]:700 Asic[ 2]:700 Asic[ 3]:700 Asic[ 4]:700 Asic[ 5]:700 Asic[ 6]:700 Asic[ 7]:700 
Asic[ 8]:700 Asic[ 9]:700 Asic[10]:700 Asic[11]:700 Asic[12]:700 Asic[13]:700 Asic[14]:700 Asic[15]:700 
Asic[16]:700 Asic[17]:700 Asic[18]:700 Asic[19]:700 Asic[20]:700 Asic[21]:700 Asic[22]:700 Asic[23]:700 
Asic[24]:700 Asic[25]:700 Asic[26]:700 Asic[27]:700 Asic[28]:700 Asic[29]:700 Asic[30]:700 Asic[31]:700 
Asic[32]:700 Asic[33]:700 Asic[34]:700 Asic[35]:700 Asic[36]:700 Asic[37]:700 Asic[38]:700 Asic[39]:700 
Asic[40]:700 Asic[41]:700 Asic[42]:700 Asic[43]:700 Asic[44]:700 Asic[45]:700 Asic[46]:700 Asic[47]:700 
Asic[48]:700 Asic[49]:700 Asic[50]:700 Asic[51]:700 Asic[52]:700 Asic[53]:700 Asic[54]:700 Asic[55]:700 
Asic[56]:700 Asic[57]:700 Asic[58]:700 Asic[59]:700 Asic[60]:700 Asic[61]:700 Asic[62]:700 
Chain:6 max freq=700
Chain:6 min freq=700

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=650
Asic[ 0]:700 Asic[ 1]:700 Asic[ 2]:700 Asic[ 3]:700 Asic[ 4]:700 Asic[ 5]:700 Asic[ 6]:700 Asic[ 7]:700 
Asic[ 8]:700 Asic[ 9]:700 Asic[10]:700 Asic[11]:700 Asic[12]:700 Asic[13]:700 Asic[14]:700 Asic[15]:700 
Asic[16]:700 Asic[17]:700 Asic[18]:700 Asic[19]:700 Asic[20]:700 Asic[21]:700 Asic[22]:700 Asic[23]:700 
Asic[24]:700 Asic[25]:700 Asic[26]:700 Asic[27]:700 Asic[28]:700 Asic[29]:700 Asic[30]:700 Asic[31]:700 
Asic[32]:700 Asic[33]:700 Asic[34]:700 Asic[35]:700 Asic[36]:700 Asic[37]:700 Asic[38]:700 Asic[39]:700 
Asic[40]:700 Asic[41]:700 Asic[42]:700 Asic[43]:700 Asic[44]:700 Asic[45]:700 Asic[46]:700 Asic[47]:700 
Asic[48]:700 Asic[49]:700 Asic[50]:700 Asic[51]:700 Asic[52]:700 Asic[53]:700 Asic[54]:700 Asic[55]:700 
Asic[56]:700 Asic[57]:700 Asic[58]:700 Asic[59]:700 Asic[60]:700 Asic[61]:700 Asic[62]:700 
Chain:7 max freq=700
Chain:7 min freq=700

max freq = 700
totalRate = 14613, fixed_totalRate = 14500
set baud=1
Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:17 remote:20 offset:26 
Chain[J6] chip[244] get middle temp offset=26 typeID=55
Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:15 remote:16 offset:28 
Chain[J7] chip[244] get middle temp offset=28 typeID=55
Chain[J8] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[8] chip[244] local:14 remote:16 offset:27 
Chain[J8] chip[244] get middle temp offset=27 typeID=55
single board rate=4888 voltage limit=940 on chain[5]
get PIC voltage=890 on chain[5], check: must be < 940
single board rate=4862 voltage limit=940 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 940
single board rate=4862 voltage limit=940 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 940
setting to working voltage...
chain[5] set voltage to 930
chain[6] set voltage to 930
chain[7] set voltage to 930
chain[5] set voltage to 920
chain[6] set voltage to 920
chain[7] set voltage to 920
chain[5] set voltage to 910
chain[6] set voltage to 910
chain[7] set voltage to 910
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[5] set voltage to 890
chain[6] set voltage to 890
chain[7] set voltage to 890
start thread for read temp
setStartTimePoint total_tv_start_sys=138 total_tv_end_sys=139
restartNum = 2 , auto-reinit enabled...
mining.subscribe:{"id": 0, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9/13500"]}
bring_up_pcb_temp = 35
avg hash rate = 10231.816512, ideal hash rate = 14500
hash rate is low...
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=81.4860 Asic[02]=74.1210 Asic[03]=75.7150 Asic[04]=5.08300 Asic[05]=75.1450 Asic[06]=77.6780 Asic[07]=76.4200 Asic[08]=82.2080 
Asic[09]=80.4800 Asic[10]=79.5570 Asic[11]=82.9800 Asic[12]=87.2070 Asic[13]=76.8730 Asic[14]=82.0070 Asic[15]=84.0870 Asic[16]=76.2350 
Asic[17]=78.6680 Asic[18]=82.5770 Asic[19]=82.2920 Asic[20]=80.8150 Asic[21]=84.0200 Asic[22]=83.3150 Asic[23]=4.68000 Asic[24]=79.2380 
Asic[25]=80.8150 Asic[26]=79.8420 Asic[27]=78.8520 Asic[28]=78.8860 Asic[29]=85.9660 Asic[30]=79.8590 Asic[31]=76.8060 Asic[32]=78.3160 
Asic[33]=78.4160 Asic[34]=74.9100 Asic[35]=80.0270 Asic[36]=77.5770 Asic[37]=75.1610 Asic[38]=79.6910 Asic[39]=71.5880 Asic[40]=77.8120 
Asic[41]=81.2350 Asic[42]=86.0500 Asic[43]=79.9260 Asic[44]=83.6170 Asic[45]=80.0600 Asic[46]=83.2820 Asic[47]=85.0600 Asic[48]=75.0270 
Asic[49]=75.0270 Asic[50]=82.8960 Asic[51]=79.5910 Asic[52]=80.1270 Asic[53]=81.6370 Asic[54]=78.0640 Asic[55]=78.7010 Asic[56]=85.8490 
Asic[57]=81.4030 Asic[58]=83.4490 Asic[59]=87.2750 Asic[60]=81.1510 Asic[61]=74.2890 Asic[62]=81.8390 Asic[63]=78.2990 

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=77.5440 Asic[02]=78.3830 Asic[03]=79.5400 Asic[04]=80.8820 Asic[05]=78.6180 Asic[06]=79.5740 Asic[07]=41.1710 Asic[08]=75.4800 
Asic[09]=83.1640 Asic[10]=83.6000 Asic[11]=73.7860 Asic[12]=74.4900 Asic[13]=79.6580 Asic[14]=81.3020 Asic[15]=74.0210 Asic[16]=81.1680 
Asic[17]=80.0940 Asic[18]=79.3050 Asic[19]=78.6680 Asic[20]=80.8820 Asic[21]=79.2220 Asic[22]=81.4530 Asic[23]=76.4870 Asic[24]=76.4360 
Asic[25]=81.2010 Asic[26]=79.3390 Asic[27]=82.3090 Asic[28]=78.6850 Asic[29]=78.5840 Asic[30]=83.5330 Asic[31]=80.5470 Asic[32]=78.3160 
Asic[33]=79.0030 Asic[34]=79.5570 Asic[35]=75.9500 Asic[36]=79.9430 Asic[37]=87.2240 Asic[38]=77.3090 Asic[39]=77.1580 Asic[40]=82.6780 
Asic[41]=75.2790 Asic[42]=82.3250 Asic[43]=84.7580 Asic[44]=79.4730 Asic[45]=79.8420 Asic[46]=14.1590 Asic[47]=78.0140 Asic[48]=79.7750 
Asic[49]=80.0440 Asic[50]=80.6810 Asic[51]=38.3350 Asic[52]=75.2120 Asic[53]=80.5800 Asic[54]=73.6680 Asic[55]=77.5440 Asic[56]=78.5340 
Asic[57]=78.2650 Asic[58]=76.0340 Asic[59]=77.5440 Asic[60]=82.7620 Asic[61]=80.8990 Asic[62]=80.8990 Asic[63]=78.3830 
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Asic[29]=131.030000
Asic[57]=123.966000
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
read failed on Chain[5] Chip[62] middle Temp old value:50
Special fix Chain[5] Chip[62] middle Temp = 50
Done read temp on Chain[5]
Chain[6] Chip[244] pcb temperature=40
Chain[6] Chip[62] junction temperature=52
Special fix Chain[6] Chip[62] middle Temp = 55
Done read temp on Chain[6]
Chain[7] Chip[244] pcb temperature=40
Chain[7] Chip[62] junction temperature=50
Special fix Chain[7] Chip[62] middle Temp = 55
Done read temp on Chain[7]
Max pcb temp : 40
Read temp failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=0
Bitcoin Forum>Bitcoin>Mining>Mining support
Jump to: