Hi.
I've replaced the bad fan but my antMiner S9 can't work correctly. I've also downgraded the firmware via SDcard and now I've this:
Antminer-S9-all-201812051512-autofreq-user-Update2UBI-NF.tar. I've also see in hash boards that only in 1 of 3 hash boards there is RF red led on, in other two boards there are no on leds.
Here is kernel log, i always have errors on pic of all 3 hash boards.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06da8ac (6987 kB)
[ 0.000000] .init : 0xc06db000 - 0xc070e380 ( 205 kB)
[ 0.000000] .data : 0xc0710000 - 0xc0757138 ( 285 kB)
[ 0.000000] .bss : 0xc0757144 - 0xc0797bfc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000294] ps7-ttc #0 at df804000, irq=43
[ 0.000598] Console: colour dummy device 80x30
[ 0.000628] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[ 0.090244] pid_max: default: 32768 minimum: 301
[ 0.090454] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090473] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.092658] CPU: Testing write buffer coherency: ok
[ 0.092979] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.093036] Setting up static identity map for 0x4cb118 - 0x4cb170
[ 0.093258] L310 cache controller enabled
[ 0.093277] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.170989] CPU1: Booted secondary processor
[ 0.260221] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.260349] Brought up 2 CPUs
[ 0.260368] SMP: Total of 2 processors activated.
[ 0.260376] CPU: All CPU(s) started in SVC mode.
[ 0.261048] devtmpfs: initialized
[ 0.263479] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.264680] regulator-dummy: no parameters
[ 0.272061] NET: Registered protocol family 16
[ 0.274336] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.276608] cpuidle: using governor ladder
[ 0.276622] cpuidle: using governor menu
[ 0.284011] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.285526] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.285540] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.285652] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.307328] bio: create slab at 0
[ 0.308736] vgaarb: loaded
[ 0.309421] SCSI subsystem initialized
[ 0.310605] usbcore: registered new interface driver usbfs
[ 0.310809] usbcore: registered new interface driver hub
[ 0.311071] usbcore: registered new device driver usb
[ 0.312340] media: Linux media interface: v0.10
[ 0.312499] Linux video capture interface: v2.00
[ 0.312738] pps_core: LinuxPPS API ver. 1 registered
[ 0.312750] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.312878] PTP clock support registered
[ 0.313229] EDAC MC: Ver: 3.0.0
[ 0.314438] Advanced Linux Sound Architecture Driver Initialized.
[ 0.317159] DMA-API: preallocated 4096 debug entries
[ 0.317174] DMA-API: debugging enabled by kernel config
[ 0.317249] Switched to clocksource arm_global_timer
[ 0.336883] NET: Registered protocol family 2
[ 0.337763] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.337822] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.337907] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.337954] TCP: reno registered
[ 0.337970] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.338002] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.338382] NET: Registered protocol family 1
[ 0.338714] RPC: Registered named UNIX socket transport module.
[ 0.338726] RPC: Registered udp transport module.
[ 0.338734] RPC: Registered tcp transport module.
[ 0.338743] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.338755] PCI: CLS 0 bytes, default 64
[ 0.339181] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.341178] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.343270] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.343456] msgmni has been set to 967
[ 0.344203] io scheduler noop registered
[ 0.344216] io scheduler deadline registered
[ 0.344261] io scheduler cfq registered (default)
[ 0.353443] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.353462] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.475848] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.042965] console [ttyPS0] enabled
[ 1.047235] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.054851] [drm] Initialized drm 1.1.0 20060810
[ 1.071805] brd: module loaded
[ 1.081233] loop: module loaded
[ 1.090653] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.096400] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.104270] libphy: XEMACPS mii bus: probed
[ 1.108952] ------------- phy_id = 0x3625e62
[ 1.113685] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.122348] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.129007] ehci-pci: EHCI PCI platform driver
[ 1.136213] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.143029] usbcore: registered new interface driver usb-storage
[ 1.149880] mousedev: PS/2 mouse device common for all mice
[ 1.155981] i2c /dev entries driver
[ 1.162933] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.168457] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.174332] Xilinx Zynq CpuIdle Driver started
[ 1.179239] sdhci: Secure Digital Host Controller Interface driver
[ 1.185335] sdhci: Copyright(c) Pierre Ossman
[ 1.189701] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.196470] mmc0: no vqmmc regulator found
[ 1.200559] mmc0: no vmmc regulator found
[ 1.237267] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.245951] usbcore: registered new interface driver usbhid
[ 1.251460] usbhid: USB HID core driver
[ 1.256150] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.262444] nand: Micron MT29F2G08ABAEAWP
[ 1.266409] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.272350] Bad block table found at page 131008, version 0x01
[ 1.278577] Bad block table found at page 130944, version 0x01
[ 1.284626] 3 ofpart partitions found on MTD device pl353-nand
[ 1.290408] Creating 3 MTD partitions on "pl353-nand":
[ 1.295499] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.303551] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.310882] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.321625] TCP: cubic registered
[ 1.324860] NET: Registered protocol family 17
[ 1.329557] Registering SWP/SWPB emulation handler
[ 1.335442] regulator-dummy: disabling
[ 1.339786] UBI: attaching mtd1 to ubi0
[ 1.730004] UBI: scanning is finished
[ 1.741813] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.748895] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.755639] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.762342] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.769200] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.775169] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.782301] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 347537888
[ 1.791245] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.800460] UBI: background thread "ubi_bgt0d" started, PID 1084
[ 1.800466] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.804429] ALSA device list:
[ 1.804434] No soundcards found.
[ 1.821237] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[ 1.938001] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.943929] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.953063] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 1.962946] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 1.967985] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 6DB0ADD6-21CD-4224-902F-9EE5F976D1A6, small LPT model
[ 1.990111] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.025814] devtmpfs: mounted
[ 2.029058] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[ 3.189135] random: dd urandom read with 1 bits of entropy available
[ 3.797270]
[ 3.797270] bcm54xx_config_init
[ 4.407270]
[ 4.407270] bcm54xx_config_init
[ 8.408096] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 8.414196] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 25.769801] In axi fpga driver!
[ 25.772950] request_mem_region OK!
[ 25.776360] AXI fpga dev virtual address is 0xdf9fe000
[ 25.781444] *base_vir_addr = 0xc51e
[ 25.796870] In fpga mem driver!
[ 25.799996] request_mem_region OK!
[ 25.803507] fpga mem virtual address is 0xe2000000
[ 26.577292]
[ 26.577292] bcm54xx_config_init
[ 27.207283]
[ 27.207283] bcm54xx_config_init
[ 31.208114] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 31.214220] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 449.676738] random: nonblocking pool is initialized
log_level = 4
This is XILINX board. Totalram: 507486208
Detect 512MB control board of XILINX
mmap axi_fpga_addr = 0xb6fa9000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5da2000
forceFreq=-1 forceFlag=0
min work minertest[0]:912
DETECT HW version=0000c51e
miner ID : 814484896600881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x00
Check chain[6] PIC fw version=0x00
Check chain[7] PIC fw version=0x00
read pic freq and badcore num...
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[5]
chain[5]: [0:0] [0:0] [0:0] [0:0] [0:0] [0:0] [0:0] [0:0]
chain[5] has no freq in PIC! Will use default freq=500 and jump over...
Check chain[5] PIC fw version=0x00
read pic freq and badcore num...
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[6]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[6]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[6]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[6]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[6]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[6]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[6]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[6]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[6]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[6]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[6]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[6]
chain[6]: [0:0] [0:0] [0:0] [0:0] [0:0] [0:0] [0:0] [0:0]
chain[6] has no freq in PIC! Will use default freq=500 and jump over...
Check chain[6] PIC fw version=0x00
read pic freq and badcore num...
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[7]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[7]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[7]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[7]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[7]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[7]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[7]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[7]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[7]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[7]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[7]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[7]
chain[7]: [0:0] [0:0] [0:0] [0:0] [0:0] [0:0] [0:0] [0:0]
chain[7] has no freq in PIC! Will use default freq=500 and jump over...
Check chain[7] PIC fw version=0x00
get PIC voltage=0 on chain[5], value=940
get PIC voltage=0 on chain[6], value=940
get PIC voltage=0 on chain[7], value=940
chain[5] temp offset record: 0,0,0,0,0,0,0,0
chain[5] temp chip I2C addr=0x98
chain[6] temp offset record: 0,0,0,0,0,0,0,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 0,0,0,0,0,0,0,0
chain[7] temp chip I2C addr=0x98
total_exist_chain_num = 3
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 3, total chain num = 3
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 3646 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Wed Dec 5 15:12:44 CST 2018 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 814484896600881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[4] speed=5880
get fan[5] speed=5400
get fan[4] speed=5880
get fan[5] speed=5400
Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[5]
chain[5]: [0:0] [0:0] [0:0] [0:0] [0:0] [0:0] [0:0] [0:0]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[5]
Check chain[5] PIC fw version=0x00
chain[5] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Do you advise me to flash the correct hex file through a PICKIT3 on all three boards? Unfortunately, however, I don't have a healthy board to download it from, can you share it with me?
