These machines run through a process that tests each board to determine its safest frequency. There are times when you have to wait 40 minutes or longer before it starts hashing. Have some patience.
The reason everything is blank is because bmminer is running. There are no stats to display when the miner is not running, nor can the status page query the version info if it is not running.
Topic: Antminer S9 - No data in Miner Status page - page 3. (Read 1846 times)
Just received a batch of four S9s today and am having the same difficulties as described above. One thing to note, my 'miner status' page finally came to life after waiting about 10 minutes. I have D3s and L3s and am accustomed to them quickly displaying the stats.
I'm having the same issue. Just got this machine 2 days ago.
Reset everything to defaults and got it to work for a sec. then it stopped when I put my name in instead of 'antminer'
Miner Status page does not fill out, Hardware Version and BMiner Version are blank.
Using 240v, Bitman APW 3++ or whatever its called (the official one for the s9)
Temps are good. It sounds like the fans spin up and down in cycles a lot.
Any clues would be helpful.
Reset everything to defaults and got it to work for a sec. then it stopped when I put my name in instead of 'antminer'
Miner Status page does not fill out, Hardware Version and BMiner Version are blank.
Using 240v, Bitman APW 3++ or whatever its called (the official one for the s9)
Temps are good. It sounds like the fans spin up and down in cycles a lot.
Any clues would be helpful.
Thank you for your reply Seven_Little_Guys,
Were you able to solve it? I'm also using the APW 3++ PSU. I got my S9 one week ago, they're probably from the same batch.
Best regards,
Paulo
Try to power off and reset your antminer maybe its just glitch or bug .. and try again.. If its not working
The other way that i know is firmware corrupted and reflashing firmware would be the solution..But i don't think is it allow to reflash your antminer since its still under warranty..
Better to contact the support from bitmain and ask if it can't avoid your warranty while flashing and ask to guide you.. .
Also check this guide for trouble shooting do this first to know if what problem of your hardware.
https://support.bitmain.com/hc/en-us/articles/220872007-Possible-problems-for-Antminer-Troubleshooting-for-S7-S9-L3-
The other way that i know is firmware corrupted and reflashing firmware would be the solution..But i don't think is it allow to reflash your antminer since its still under warranty..
Better to contact the support from bitmain and ask if it can't avoid your warranty while flashing and ask to guide you.. .
Also check this guide for trouble shooting do this first to know if what problem of your hardware.
https://support.bitmain.com/hc/en-us/articles/220872007-Possible-problems-for-Antminer-Troubleshooting-for-S7-S9-L3-
Thank you for your reply Bitmax,
in your opinion, which S9 firmware should I install? There are a lot of options in the Bitmain website and I'm not sure what is the proper one for my device (it's a 14 THs, shipping 11-20 Dec).
https://imgur.com/a/19hr9
https://shop.bitmain.com/support.htm?pid=00720161126080548570Q2tDBXAH065D
I'm having the same issue. Just got this machine 2 days ago.
Reset everything to defaults and got it to work for a sec. then it stopped when I put my name in instead of 'antminer'
Miner Status page does not fill out, Hardware Version and BMiner Version are blank.
Using 240v, Bitman APW 3++ or whatever its called (the official one for the s9)
Temps are good. It sounds like the fans spin up and down in cycles a lot.
Any clues would be helpful.
Reset everything to defaults and got it to work for a sec. then it stopped when I put my name in instead of 'antminer'
Miner Status page does not fill out, Hardware Version and BMiner Version are blank.
Using 240v, Bitman APW 3++ or whatever its called (the official one for the s9)
Temps are good. It sounds like the fans spin up and down in cycles a lot.
Any clues would be helpful.
Try to power off and reset your antminer maybe its just glitch or bug .. and try again.. If its not working
The other way that i know is firmware corrupted and reflashing firmware would be the solution..But i don't think is it allow to reflash your antminer since its still under warranty..
Better to contact the support from bitmain and ask if it can't avoid your warranty while flashing and ask to guide you.. .
Also check this guide for trouble shooting do this first to know if what problem of your hardware.
https://support.bitmain.com/hc/en-us/articles/220872007-Possible-problems-for-Antminer-Troubleshooting-for-S7-S9-L3-
The other way that i know is firmware corrupted and reflashing firmware would be the solution..But i don't think is it allow to reflash your antminer since its still under warranty..
Better to contact the support from bitmain and ask if it can't avoid your warranty while flashing and ask to guide you.. .
Also check this guide for trouble shooting do this first to know if what problem of your hardware.
https://support.bitmain.com/hc/en-us/articles/220872007-Possible-problems-for-Antminer-Troubleshooting-for-S7-S9-L3-
Hi,
I recently recieved my Antminer S9-14TH/s Shipping: 11-20 Dec. I spent the entire day trying to connect it to antpool but the Miner Status page appears blank. In the System page, there doesn't appear information regarding Hardware Version nor BMminer Version. I'm posting print screens bellow. What could be causing this and how can I solve it?
Best regards,
Paulo
https://imgur.com/a/1nnt1
I recently recieved my Antminer S9-14TH/s Shipping: 11-20 Dec. I spent the entire day trying to connect it to antpool but the Miner Status page appears blank. In the System page, there doesn't appear information regarding Hardware Version nor BMminer Version. I'm posting print screens bellow. What could be causing this and how can I solve it?
Best regards,
Paulo
https://imgur.com/a/1nnt1
Jump to: