Topic: Antminer S9 one hashboard stop appearing in STATUS - page 2. (Read 3070 times)
Sad to hear that... Specially since I was not able to install the machine until last week because some personal issues. The machine is out of warranty but never used except for these 48 hours I mentioned
The hashing board is dead, and there really arent any parts serviceable by someone not adept at board level repair.
The only solution is to send your board out for repair. It is normal to have blades randomly die on older s9s.
The only solution is to send your board out for repair. It is normal to have blades randomly die on older s9s.
I have the same exact problem.... 
, I Even swapped the cables from the psu to the hashboards around just to rule out the cables, and for a brief moment the hash board in middle's(The one not working) light alone was on, then back to the two outer hash boards working with the light of each one and the one in the middle off, I have mined for 48 hours total the first 5 of whick I was mining at an avg 14TH and after in an avg of 8.5TH. Of course that bitmain will take an eternity to answer... so I was wondering if any computer technician could see anything like a loose cable and just attach it back, or is the miner such a weird device that a normal computer person wouldt understand. I am out of warranty and prefer to mine at 2/3 capacity than not to mine at all.
Thanks Bros
https://postimg.org/image/638d5l4sn/
https://postimg.org/image/rcvzgfst3/
, I Even swapped the cables from the psu to the hashboards around just to rule out the cables, and for a brief moment the hash board in middle's(The one not working) light alone was on, then back to the two outer hash boards working with the light of each one and the one in the middle off, I have mined for 48 hours total the first 5 of whick I was mining at an avg 14TH and after in an avg of 8.5TH. Of course that bitmain will take an eternity to answer... so I was wondering if any computer technician could see anything like a loose cable and just attach it back, or is the miner such a weird device that a normal computer person wouldt understand. I am out of warranty and prefer to mine at 2/3 capacity than not to mine at all. Thanks Bros
https://postimg.org/image/638d5l4sn/
https://postimg.org/image/rcvzgfst3/
Hi, i have this same problem with s9 13.5
a hashboard disappeared from the panel, now only working with two hashboards.
I have already done firmware update several times, already tested the hashboard in other connectors and the cable of the controller card also and nothing to work,
I noticed that when the equipment is turned on, the red light on the hashboard lights, but then it goes out and does not come back on again
If anyone has any solutions thank you for the attention. Thank you very much, good luck to all.
look img panel.
https://i.imgur.com/DXlMUib.png
https://i.imgur.com/DXlMUib.png
***
After 1 day off the machine and restart again and the hashboard show in panel as the image shows, but the temperature is marking 0.
Any solution
please
All thanks
https://i.imgur.com/wCW6rAV.png
kernel log
(Moderator note: This post was edited by frodocooper to use code tags.)
a hashboard disappeared from the panel, now only working with two hashboards.
I have already done firmware update several times, already tested the hashboard in other connectors and the cable of the controller card also and nothing to work,
I noticed that when the equipment is turned on, the red light on the hashboard lights, but then it goes out and does not come back on again
If anyone has any solutions thank you for the attention. Thank you very much, good luck to all.
look img panel.
https://i.imgur.com/DXlMUib.png
https://i.imgur.com/DXlMUib.png
***
After 1 day off the machine and restart again and the hashboard show in panel as the image shows, but the temperature is marking 0.
Any solution
pleaseAll thanks
https://i.imgur.com/wCW6rAV.png
kernel log
Code:
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600
Chain:5 max freq=600
Chain:5 min freq=600
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600
Chain:6 max freq=600
Chain:6 min freq=600
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600
Chain:7 max freq=600
Chain:7 min freq=600
max freq = 600
set baud=1
Chain[J6] PIC temp offset=62,-4,0,0,0,0,0,0
Chain[J6] chip[244] use PIC middle temp offset=-4 typeID=55
New offset Chain[5] chip[244] local:36 remote:38 offset:29
Chain[J6] chip[244] get middle temp offset=29 typeID=55
Chain[J7] PIC temp offset=62,-4,0,0,0,0,0,0
Chain[J7] chip[244] use PIC middle temp offset=-4 typeID=55
New offset Chain[6] chip[244] local:28 remote:30 offset:28
Chain[J7] chip[244] get middle temp offset=28 typeID=55
Chain[J8] PIC temp offset=62,-5,0,0,0,0,0,0
Chain[J8] chip[244] use PIC middle temp offset=-5 typeID=55
New offset Chain[7] chip[244] local:34 remote:36 offset:29
Chain[J8] chip[244] get middle temp offset=29 typeID=55
Chain[J6] set working voltage=930 [23]
Chain[J7] set working voltage=930 [23]
Chain[J8] set working voltage=930 [23]
setStartTimePoint total_tv_start_sys=60 total_tv_end_sys=61
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=75.0100 Asic[02]=66.4710 Asic[03]=68.3160 Asic[04]=72.4940 Asic[05]=70.1450 Asic[06]=66.2020 Asic[07]=68.2830 Asic[08]=70.0780
Asic[09]=69.8090 Asic[10]=70.3460 Asic[11]=68.6020 Asic[12]=65.0950 Asic[13]=70.9840 Asic[14]=71.7720 Asic[15]=68.8530 Asic[16]=73.5000
Asic[17]=70.3800 Asic[18]=70.8830 Asic[19]=72.7290 Asic[20]=66.9740 Asic[21]=68.7360 Asic[22]=64.9440 Asic[23]=61.6050 Asic[24]=62.5450
Asic[25]=60.3810 Asic[26]=62.2770 Asic[27]=68.5010 Asic[28]=64.8770 Asic[29]=63.6350 Asic[30]=67.4440 Asic[31]=68.0810 Asic[32]=66.7390
Asic[33]=66.2860 Asic[34]=67.7960 Asic[35]=72.8290 Asic[36]=64.3400 Asic[37]=68.1650 Asic[38]=66.5550 Asic[39]=67.4100 Asic[40]=73.5340
Asic[41]=68.2490 Asic[42]=71.0170 Asic[43]=71.3870 Asic[44]=70.8160 Asic[45]=66.5710 Asic[46]=68.9710 Asic[47]=66.4200 Asic[48]=70.2290
Asic[49]=76.7220 Asic[50]=70.8660 Asic[51]=68.6180 Asic[52]=72.9470 Asic[53]=71.3530 Asic[54]=64.4410 Asic[55]=63.6190 Asic[56]=69.0550
Asic[57]=68.0650 Asic[58]=71.3190 Asic[59]=71.4540 Asic[60]=69.7760 Asic[61]=70.5310 Asic[62]=64.8770 Asic[63]=71.2360
get RT hashrate from Chain[6]: (asic index start from 1-63)
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=71.9400 Asic[02]=70.3800 Asic[03]=73.7520 Asic[04]=69.9100 Asic[05]=75.0100 Asic[06]=75.4470 Asic[07]=67.8130 Asic[08]=69.2890
Asic[09]=66.5710 Asic[10]=63.0480 Asic[11]=68.2320 Asic[12]=73.0310 Asic[13]=62.5950 Asic[14]=75.3120 Asic[15]=71.5380 Asic[16]=69.2890
Asic[17]=66.7060 Asic[18]=64.3400 Asic[19]=73.9200 Asic[20]=70.8830 Asic[21]=74.5570 Asic[22]=70.3130 Asic[23]=64.2060 Asic[24]=66.9570
Asic[25]=67.1920 Asic[26]=65.7160 Asic[27]=68.4670 Asic[28]=64.4910 Asic[29]=70.0440 Asic[30]=69.1220 Asic[31]=70.1620 Asic[32]=68.3330
Asic[33]=70.6320 Asic[34]=67.2260 Asic[35]=76.0670 Asic[36]=68.4840 Asic[37]=63.5520 Asic[38]=73.6010 Asic[39]=64.5080 Asic[40]=68.0480
Asic[41]=70.5480 Asic[42]=67.0240 Asic[43]=70.3800 Asic[44]=74.7420 Asic[45]=70.9670 Asic[46]=59.5420 Asic[47]=72.2590 Asic[48]=63.4840
Asic[49]=70.1620 Asic[50]=66.6890 Asic[51]=66.3530 Asic[52]=70.4470 Asic[53]=69.4570 Asic[54]=72.2760 Asic[55]=71.3190 Asic[56]=72.5110
Asic[57]=64.5080 Asic[58]=70.7830 Asic[59]=69.2060 Asic[60]=64.2730 Asic[61]=70.4130 Asic[62]=67.0080 Asic[63]=73.0310
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Asic[57]=348.613000
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=29
Chain[5] Chip[62] local Temp=69
Chain[5] Chip[62] middle Temp=82
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=28
read failed, old value: Chain[6] Chip[62] local Temp=0
read failed on Chain[6] Chip[62] middle Temp old value:0
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=29
Chain[7] Chip[62] local Temp=66
Chain[7] Chip[62] middle Temp=78
Done read temp on Chain[7]
set FAN speed according to: temp_highest=82 temp_top1[PWM_T]=82 temp_top1[TEMP_POS_LOCAL]=69 temp_change=0 fix_fan_steps=0
FAN PWM: 84
read_temp_func Done!
CRC error counter=0
(Moderator note: This post was edited by frodocooper to use code tags.)
Thanks For The fast replay.
I will try to repair it although i dont know if it is worth doing so or just leave it with the two boards hashing.
Thanks once again people.
I will try to repair it although i dont know if it is worth doing so or just leave it with the two boards hashing.
Thanks once again people.
As said before - you have a hash board that is failing/has failed. It is not uncommon for a bad board to run for a bit and then drop out.
New UPDATE 26/9/2017
I tried and flashed the new bitmain firmware and all of a sudden the third hashboard appeard in the miners status and for a couple of hours it worked perfect.
The hashrate came back to 12.5ths.
BUT two hours later the hashboard desappeared again
Does anyone know what is happening?
Plz help.
I tried and flashed the new bitmain firmware and all of a sudden the third hashboard appeard in the miners status and for a couple of hours it worked perfect.
The hashrate came back to 12.5ths.
BUT two hours later the hashboard desappeared again
Does anyone know what is happening?
Plz help.
A firmware flash only affects the controller. You have a bad hash board. These are string design and it only takes one failure point to kill an entire board. If you purchased it new from bitmain in May you are still under warranty. You can put a ticket in and ship it to the los angeles depot for repair.
Time for a warranty repair with Bitmain and if there is no warranty time left then it's time for a repair with Bitmainwarranty (different company than Bitmain).
See their repair guide for more https://shop.bitmain.com/workOrderGuide.htm
You must carefully follow their instructions in the repair guide for the shipment and everything
See their repair guide for more https://shop.bitmain.com/workOrderGuide.htm
You must carefully follow their instructions in the repair guide for the shipment and everything
Quote from: Bitmain
...
b. For the miner, if your miner is:
S9: Shipped before October 1, 2016, please ship the defective part
Shipped after October 1, 2016, please ship the whole machine
b. For the miner, if your miner is:
S9: Shipped before October 1, 2016, please ship the defective part
Shipped after October 1, 2016, please ship the whole machine
Hi everyone.
i am having trouble with my S9 12.5TH/s.
I bought the miner on May 2017 and put it mining in a server room with no dust and room temperature from 19 to 23 Celsius max.
The miner had chip temps around 69min-82max and fans around 2000min-3200max rpms.
I use the APW3 of Bitmain`s PSU.
Yesterday i noticed that one of the hashboards does not appear in the STATUS window(NO XXXXXXXX`s NO --------------`s just not appearing.it only shows 2 blades).
The miner hashes at 2/3 of the total power and consumes the 2/3 of the maximum voltage.
I also touched with my finger the top end of the circuit boards of the 3 blades and one of them is DEAD cold. The other 2 are just a liiiiiiitle bit worm(i believe this means no current passes through the one board?).
Also there is a red light in every hashboard and on the COLD hashboard is NOT light.
Is there a way to fix it or do i need to sent it to bitmain?
I mean if flashing new firmware, change cables, hard reset(if there is such a thing), check control board etc is going to help.
Please any tips are welcome.
Please note that i don`t have other antminer in hand. it is the only one.
Thank you in advance and sorry for my English as they are not my primary language.
UPDATE:
1) I left onboard only the one blade that does not had the red light on and connected 3 6pin power cables from the other 2 blades which they were working and switched ON. NOTHING happened. NO hashing.
2) I used different 18pin signal cable from the controller in case that was the problem and switched it ON. Still NO hashing.
I believe updating the new firmware wont do nothing?
Plz help.
Thank you
i am having trouble with my S9 12.5TH/s.
I bought the miner on May 2017 and put it mining in a server room with no dust and room temperature from 19 to 23 Celsius max.
The miner had chip temps around 69min-82max and fans around 2000min-3200max rpms.
I use the APW3 of Bitmain`s PSU.
Yesterday i noticed that one of the hashboards does not appear in the STATUS window(NO XXXXXXXX`s NO --------------`s just not appearing.it only shows 2 blades).
The miner hashes at 2/3 of the total power and consumes the 2/3 of the maximum voltage.
I also touched with my finger the top end of the circuit boards of the 3 blades and one of them is DEAD cold. The other 2 are just a liiiiiiitle bit worm(i believe this means no current passes through the one board?).
Also there is a red light in every hashboard and on the COLD hashboard is NOT light.
Is there a way to fix it or do i need to sent it to bitmain?
I mean if flashing new firmware, change cables, hard reset(if there is such a thing), check control board etc is going to help.
Please any tips are welcome.
Please note that i don`t have other antminer in hand. it is the only one.
Thank you in advance and sorry for my English as they are not my primary language.
UPDATE:
1) I left onboard only the one blade that does not had the red light on and connected 3 6pin power cables from the other 2 blades which they were working and switched ON. NOTHING happened. NO hashing.
2) I used different 18pin signal cable from the controller in case that was the problem and switched it ON. Still NO hashing.
I believe updating the new firmware wont do nothing?
Plz help.
Thank you
Jump to: