ETH
$750, 1 x 3080 = 240w, 100 mhs
$850, 2 x 3060ti = 270w, 124 mhs
I think they are pretty even, i guess in the end is going to be what you prefer.
Topic: Any news about nvidia 3060ti hash rates? - page 6. (Read 5712 times)
I got my new 3060 ti today. It´s a Gigabyte Aorus.
I have 58 Mhash @ 120 W with +800 memclock and 50 % TDP.
I have a powermeter at the wall, my 2070 showed 108 w where the power from the wall was 137. now the 3060 shows 120 w and power from wall is 175. so it´s 12w more, but in real it´s nearly 40w more
So the wattage display shown from the new 3060 is like the AMD cards are....it´s totally random and unreal numbers. (or my pc suddenly needs more power while hashing...)
I think I switch to a 3070 as my gaming performance is the same than the 2070S. and I wanted to be a little faster....hashing must be the same 3060 = 3070
I have 58 Mhash @ 120 W with +800 memclock and 50 % TDP.
I have a powermeter at the wall, my 2070 showed 108 w where the power from the wall was 137. now the 3060 shows 120 w and power from wall is 175. so it´s 12w more, but in real it´s nearly 40w more
So the wattage display shown from the new 3060 is like the AMD cards are....it´s totally random and unreal numbers. (or my pc suddenly needs more power while hashing...)
I think I switch to a 3070 as my gaming performance is the same than the 2070S. and I wanted to be a little faster....hashing must be the same 3060 = 3070
@mado18
Set fixed low voltage with custom curve at afterburner.
Its left of core clock.
Set fixed low voltage with custom curve at afterburner.
Its left of core clock.
Thanks!
So no overheating ram issues with gddr6 (non-x) ?
So far no-one is getting throttling or least no-one reported it here.
my aorus 3060ti is steady at
60.85 using 119 watts
CARD---------------------------Clocks----------------Hash--------------Watts--------------Temp/fan
Gigabyte RTX 3060 Ti 8GB___1485/7976______60.85 MH/s______119 W__________49°C/ 65%
@mado18
Set fixed low voltage with custom curve at afterburner.
Its left of core clock.
Set fixed low voltage with custom curve at afterburner.
Its left of core clock.
So no overheating ram issues with gddr6 (non-x) ?
Nope sir , OC & 60c in 20c room
So no overheating ram issues with gddr6 (non-x) ?
You have to either lower power limit or underclock.
You can also bump memclock a bit ... 8000 is OK
You can also bump memclock a bit ... 8000 is OK
Thanks a lot, I've set the PL to 55% and MC to 8000 and I'm getting 130w and 60.5.
You have to either lower power limit or underclock.
You can also bump memclock a bit ... 8000 is OK
You can also bump memclock a bit ... 8000 is OK
I have a MSI Gaming Trio X and I've set core clock to -502 (give me 1500) and memory clock to +1100 (gives me 7900) in AfterBurner. In phoenix I have the following -retrydelay 1 -ftime 55 -tt 60 -tstop 70 -tstart 65 -fanmin 30 -Rmode 1 and I get 60 Mh. Still, it shows me 216.7 W in phoenix and everybody is saying roughly 120. What am I missing?
PhoenixMiner
1675W - 731.7 MH/s
FAN 85 85 85 85 85 85 85 85 85 85 85 85
CORE -500 -500 -500 -500 -500 -500 -500 -500 -500 -500 -500 -500
MEM 2550 2550 2100 2700 2600 2150 2350 2150 2150 2450 2350 2500
PL 125 125 125 125 125 125 125 125 125 125 125 125
The same setting wilt lolminer:
1673W - 723.3 MH/s
1675W - 731.7 MH/s
FAN 85 85 85 85 85 85 85 85 85 85 85 85
CORE -500 -500 -500 -500 -500 -500 -500 -500 -500 -500 -500 -500
MEM 2550 2550 2100 2700 2600 2150 2350 2150 2150 2450 2350 2500
PL 125 125 125 125 125 125 125 125 125 125 125 125
The same setting wilt lolminer:
1673W - 723.3 MH/s
Not bad considering PhoenixMiner is between 2-3% inflated the hash rate:
731,7 - 2% = 717,07 vs 723.3Mhs
PhoenixMiner
1675W - 731.7 MH/s
FAN 85 85 85 85 85 85 85 85 85 85 85 85
CORE -500 -500 -500 -500 -500 -500 -500 -500 -500 -500 -500 -500
MEM 2550 2550 2100 2700 2600 2150 2350 2150 2150 2450 2350 2500
PL 125 125 125 125 125 125 125 125 125 125 125 125
The same setting wilt lolminer:
1673W - 723.3 MH/s
1675W - 731.7 MH/s
FAN 85 85 85 85 85 85 85 85 85 85 85 85
CORE -500 -500 -500 -500 -500 -500 -500 -500 -500 -500 -500 -500
MEM 2550 2550 2100 2700 2600 2150 2350 2150 2150 2450 2350 2500
PL 125 125 125 125 125 125 125 125 125 125 125 125
The same setting wilt lolminer:
1673W - 723.3 MH/s
can i post my msi ventis 2 oc rtx 3070 results while i'm waiting my Post to bring me new 3060ti? 
3070 is really good! 63.5 mhs @ 125watt. Win, msi afterburner and its Curve Editor. Rocks! 1155/8250@743mv.
Old good claymore. 1 mistaken solution overnight. Number of sent good shares is good enough comparing to vegas and TRM running simultaneously.
Well. I gave nbminer a try. And it uses 119watt instead of claymore's 125 with the same speed. cool! 3070 is really good! 63.5 mhs @ 125watt. Win, msi afterburner and its Curve Editor. Rocks! 1155/8250@743mv.
Old good claymore. 1 mistaken solution overnight. Number of sent good shares is good enough comparing to vegas and TRM running simultaneously.
can i post my msi ventis 2 oc rtx 3070 results while i'm waiting my Post to bring me new 3060ti?
3070 is really good! 63.5 mhs @ 125watt. Win, msi afterburner and its Curve Editor. Rocks! 1155/8250@743mv.
Old good claymore. 1 mistaken solution overnight. Number of sent good shares is good enough comparing to vegas and TRM running simultaneously.
3070 is really good! 63.5 mhs @ 125watt. Win, msi afterburner and its Curve Editor. Rocks! 1155/8250@743mv.
Old good claymore. 1 mistaken solution overnight. Number of sent good shares is good enough comparing to vegas and TRM running simultaneously.
724.9 MH/s - 1674W - 12 pcs Zotac 3060Ti
Stable - No invalid shares for 17 hours so far.
FAN 85 85 85 85 85 85 85 85 85 85 85 85
CORE -500 -500 -500 -500 -500 -500 -500 -500 -500 -500 -500 -500
MEM 2200 2200 2100 2200 2200 2200 2200 2150 2150 2200 2150 2200
PL 125 125 125 125 125 125 125 125 125 125 125 125
Stable - No invalid shares for 17 hours so far.
Code:
phoenixminer-ver. 5.3b v.PM 5.3b - ETH, HiveOS Version: 0.6-180@201208, Kernel Version: 5.0.21-hiveos, NVIDIA Driver Version: 455.45.01.
Critical temperature: 80, Critical Action: Stop Miner, AutoFan ON, Target Core TEMP: 60, Target MEM TEMP: 80, Min fan speed: 25, Max fan speed: 100, Reboot on errors ON
FAN 85 85 85 85 85 85 85 85 85 85 85 85
CORE -500 -500 -500 -500 -500 -500 -500 -500 -500 -500 -500 -500
MEM 2200 2200 2100 2200 2200 2200 2200 2150 2150 2200 2150 2200
PL 125 125 125 125 125 125 125 125 125 125 125 125
okay I ran my single aorus overnight on smos
it did 61.28 set to
core +10
ram +2525
watts 120
it did 3414 good shares and 3 rejects.
724.9 MH/s - 1674W - 12 pcs Zotac 3060Ti
Stable - No invalid shares for 17 hours so far.
FAN 85 85 85 85 85 85 85 85 85 85 85 85
CORE -500 -500 -500 -500 -500 -500 -500 -500 -500 -500 -500 -500
MEM 2200 2200 2100 2200 2200 2200 2200 2150 2150 2200 2150 2200
PL 125 125 125 125 125 125 125 125 125 125 125 125
Stable - No invalid shares for 17 hours so far.
Code:
phoenixminer-ver. 5.3b v.PM 5.3b - ETH, HiveOS Version: 0.6-180@201208, Kernel Version: 5.0.21-hiveos, NVIDIA Driver Version: 455.45.01.
Critical temperature: 80, Critical Action: Stop Miner, AutoFan ON, Target Core TEMP: 60, Target MEM TEMP: 80, Min fan speed: 25, Max fan speed: 100, Reboot on errors ON
FAN 85 85 85 85 85 85 85 85 85 85 85 85
CORE -500 -500 -500 -500 -500 -500 -500 -500 -500 -500 -500 -500
MEM 2200 2200 2100 2200 2200 2200 2200 2150 2150 2200 2150 2200
PL 125 125 125 125 125 125 125 125 125 125 125 125
I would suggest that you manually set your fan speeds a little high to keep the memory cool since mem temps aren't monitored with 30 series.
and that is bad, is a grave mistake, as long as you know the memory temperature, you can do something about it thus minimizing the risk of a future lost gpu, when memory starts failing then is too late.
Thomas Edison and his 800 hour light bulb strikes again.
BTW the ones in his office and home Lasted 50+ years.
I would suggest that you manually set your fan speeds a little high to keep the memory cool since mem temps aren't monitored with 30 series.
and that is bad, is a grave mistake, as long as you know the memory temperature, you can do something about it thus minimizing the risk of a future lost gpu, when memory starts failing then is too late.
thanks for info
I have settled at this for smos
core+10 gives me 1425 reading seems stable
ram +2600 gives me 8100 reading seems stable
watts 125
hash 61.32mh
29 shares no rejects
I will run this for an hour or 2 may try 120 watts next
I have settled at this for smos
core+10 gives me 1425 reading seems stable
ram +2600 gives me 8100 reading seems stable
watts 125
hash 61.32mh
29 shares no rejects
I will run this for an hour or 2 may try 120 watts next
I would suggest that you manually set your fan speeds a little high to keep the memory cool since mem temps aren't monitored with 30 series.
Yeah did that. 75%
thanks for info
I have settled at this for smos
core+10 gives me 1425 reading seems stable
ram +2600 gives me 8100 reading seems stable
watts 125
hash 61.32mh
29 shares no rejects
I will run this for an hour or 2 may try 120 watts next
I have settled at this for smos
core+10 gives me 1425 reading seems stable
ram +2600 gives me 8100 reading seems stable
watts 125
hash 61.32mh
29 shares no rejects
I will run this for an hour or 2 may try 120 watts next
I would suggest that you manually set your fan speeds a little high to keep the memory cool since mem temps aren't monitored with 30 series.
Jump to: