Topic: Armory DB massages, what do they mean?Armory stops DB - page 2. (Read 2754 times)

http://pastebin.com/shAPsajH
it is in scanning transaction mode now.

But no connection with bitindJparsonnode,because in one of the last advices I should

When I opened now Armory it was still in the offlinemode
because before opening armory and mark the box it is still in the offline mode

Armory is now running offline,as the task-Manager indicates.Can I shut down now Armory and start again  in online mode?

Do I have to do the commandpromt again,the way ,you,archow 101 told me,before I start Armory online?


Sorry for the many questions,but goatpig ticked me off (quite righly),because I was doing things I do not understand.

Hit enter. There should be some output on the console. Leave it open and wait for a message about "enable zero-conf tracking". Then start Armory normally while the console is still open.

Thanks for the Help my trouble makes. I did what you recommended .It looks like this in the CommandPropmt
With the above Line do I have to do something  now or just start Armory?
is the sign    before ArmoryDH.exe.. right?

Next question:Do  I have to start Armory on-or offline???
Which way?

The cd means change directory. It tells the command prompt to go to that folder.

Instead of doing the cd command, open up the file explorer and go to wherever you have armory installed. Then click on an empty spot in the file explorer and hold Shift then right click. Choose the option "Open a command window here". Then type the second command with ArmoryDB.

When I type in
cd C:\Program Files (x86)\Armory\

ArmoryDB.exe --thread-count=1

the command prompt line shows me always C:\Users\Thomas> and when I execute these command,it says ...file cannot be found...

becasuse the command line starts with C:\Users\Thomas>
and not empty or at least C:

What does the cd before C:\Program Files(86).... mean?
or how can I give the laptop the right way,where armory and Armory DB.exe ist installed.

sorry,but pastebin is temporarily unanvailable



logging in C:\Users\Thomas\AppData\Roaming/Armory/dbLog.txt
-INFO  - 1481295391: (..\main.cpp:23) Running on 4 threads
-INFO  - 1481295391: (..\main.cpp:24) Ram usage level: 4
-INFO  - 1481295391: (..\BlockUtils.cpp:1338) blkfile dir: C:\Users\Thomas\AppData\Roaming/Bitcoin/blocks
-INFO  - 1481295391: (..\BlockUtils.cpp:1339) lmdb dir: C:\Users\Thomas\AppData\Roaming/Armory/databases
-INFO  - 1481295391: (..\lmdb_wrapper.cpp:388) Opening databases...
-INFO  - 1481295392: (..\BlockUtils.cpp:1521) Executing: doInitialSyncOnLoad
-INFO  - 1481295392: (..\DatabaseBuilder.cpp:169) Reading headers from db
-INFO  - 1481295392: (..\BitcoinP2P.cpp:783) Connected to Bitcoin node
-INFO  - 1481295401: (..\DatabaseBuilder.cpp:208) Found 442240 headers in db
-INFO  - 1481295406: (..\DatabaseBuilder.cpp:51) updating HEADERS db
-INFO  - 1481295407: (..\DatabaseBuilder.cpp:477) Found next block after skipping 366155bytes
-INFO  - 1481295409: (..\DatabaseBuilder.cpp:268) parsed block file #704
-DEBUG - 1481295420: (..\Blockchain.cpp:242) Organizing chain
-INFO  - 1481295421: (..\DatabaseBuilder.cpp:56) updated HEADERS db in 15.507s
-INFO  - 1481295421: (..\BlockUtils.cpp:1636) Enabling zero-conf tracking


  File "json\decoder.pyc", line 384, in raw_decode
ValueError: No JSON object could be decoded
2016-12-09 16:04 (ERROR) -- SDM.pyc:791 - ValueError in bkgd req top blk
Traceback (most recent call last):
  File "SDM.pyc", line 765, in __backgroundRequestTopBlock
  File "bitcoinrpc_jsonrpc\authproxy.pyc", line 105, in __call__
  File "json\__init__.pyc", line 351, in loads
  File "json\decoder.pyc", line 366, in decode
  File "json\decoder.pyc", line 384, in raw_decode
ValueError: No JSON object could be decoded
2016-12-09 16:04 (ERROR) -- SDM.pyc:791 - ValueError in bkgd req top blk
Traceback (most recent call last):
  File "SDM.pyc", line 765, in __backgroundRequestTopBlock
  File "bitcoinrpc_jsonrpc\authproxy.pyc", line 105, in __call__
  File "json\__init__.pyc", line 351, in loads
  File "json\decoder.pyc", line 366, in decode
  File "json\decoder.pyc", line 384, in raw_decode
ValueError: No JSON object could be decoded
2016-12-09 16:04 (ERROR) -- SDM.pyc:791 - ValueError in bkgd req top blk
Traceback (most recent call last):
  File "SDM.pyc", line 765, in __backgroundRequestTopBlock
  File "bitcoinrpc_jsonrpc\authproxy.pyc", line 105, in __call__
  File "json\__init__.pyc", line 351, in loads
  File "json\decoder.pyc", line 366, in decode
  File "json\decoder.pyc", line 384, in raw_decode
ValueError: No JSON object could be decoded
2016-12-09 16:04 (ERROR) -- SDM.pyc:791 - ValueError in bkgd req top blk
Traceback (most recent call last):
  File "SDM.pyc", line 765, in __backgroundRequestTopBlock
  File "bitcoinrpc_jsonrpc\authproxy.pyc", line 105, in __call__
  File "json\__init__.pyc", line 351, in loads
  File "json\decoder.pyc", line 366, in decode
  File "json\decoder.pyc", line 384, in raw_decode
ValueError: No JSON object could be decoded
2016-12-09 16:04 (ERROR) -- SDM.pyc:791 - ValueError in bkgd req top blk
Traceback (most recent call last):
  File "SDM.pyc", line 765, in __backgroundRequestTopBlock
  File "bitcoinrpc_jsonrpc\authproxy.pyc", line 105, in __call__
  File "json\__init__.pyc", line 351, in loads
  File "json\decoder.pyc", line 366, in decode
  File "json\decoder.pyc", line 384, in raw_decode
ValueError: No JSON object could be decoded
2016-12-09 16:04 (ERROR) -- SDM.pyc:791 - ValueError in bkgd req top blk
Traceback (most recent call last):
  File "SDM.pyc", line 765, in __backgroundRequestTopBlock
  File "bitcoinrpc_jsonrpc\authproxy.pyc", line 105, in __call__
  File "json\__init__.pyc", line 351, in loads
  File "json\decoder.pyc", line 366, in decode
  File "json\decoder.pyc", line 384, in raw_decode
ValueError: No JSON object could be decoded
2016-12-09 16:04 (ERROR) -- SDM.pyc:791 - ValueError in bkgd req top blk
Traceback (most recent call last):
  File "SDM.pyc", line 765, in __backgroundRequestTopBlock
  File "bitcoinrpc_jsonrpc\authproxy.pyc", line 105, in __call__
  File "json\__init__.pyc", line 351, in loads
  File "json\decoder.pyc", line 366, in decode
  File "json\decoder.pyc", line 384, in raw_decode
ValueError: No JSON object could be decoded
2016-12-09 16:04 (ERROR) -- SDM.pyc:791 - ValueError in bkgd req top blk
Traceback (most recent call last):
  File "SDM.pyc", line 765, in __backgroundRequestTopBlock
  File "bitcoinrpc_jsonrpc\authproxy.pyc", line 105, in __call__
  File "json\__init__.pyc", line 351, in loads
  File "json\decoder.pyc", line 366, in decode
  File "json\decoder.pyc", line 384, in raw_decode
ValueError: No JSON object could be decoded


you said some posts before:

Next, start BitcoinQt, let it catch up

Does that mean,if this is done, I can shut down BitcoinQt because Armory in online will shutdown BircoinQt and run bicoind in the backgrund?
   
 

how do I open the command propmt
Do I have to type the exact text you wrote


https://photos-3.dropbox.com/t/2/AAC2enlu4OSypNPfRQ_lmdKhrviRbRsJPMnVWjLHWz7Xwg/12/263707393/png/32x32/1/_/1/2/Screenshot%202016-12-09%2016.15.33.png/EKql4fYBGLAEIAIoAg/vOacslrIUzJASDgWpUpeiDgn7alDMXHKFnvmyw-ze08?size_mode=5

Looks like your last block data file is damaged.

First, shutdown Armory. Make sure ArmoryDB.exe is not running. If it is, terminate the process.

Next, open the command prompt, type in these commands:


Last, start ArmoryQt. Then, post log files again.

Now Armory is in sannning  in Trancaction Hystery mode.I think I have to wait now for sometime
Build Database bar is completely green


http://pastebin.com/Q8B6kbWj

http://pastebin.com/HgyY3vGE

As the notification ArmoryQt does not work again appeared,Ijust ignored it und went on executing our advices ,goatpig

Thanks goatpig,
as I have armory not in the offline mode in the armory folder.
So ,how to start Armory in oflline mode?

Your database and blockchain data look fine so far.

Start ArmoryQt in offline mode, in Files -> Settings, turn off auto bitcoind management (the first checkbox), then shut it down.

Next, start BitcoinQt, let it catch up. Then start ArmoryQt in online mode.

After the admonishment from goatpig  (thanks for you patience with me-I am 71 old-) Iwould us an extreme option  and I should not have used things I am not nerx familiar with
I dit the following.
From December 07, 2016, 03:03:36 PM )I startet lightest version of facory rest and run Armory untis abur 10 PM,was tired and wenr to bed.
The next day I run Armory from 8 AP to 16 PM but nothing happend at the building databases Armorx-Display nor on the Scanninh Tanasaction History.
I let Armory run up to today ,nor progress
Here some logs:
http://pastebin.com/AB9rzaQ7



Log file opened at 1481182087: C:\Users\Thomas\AppData\Roaming\Armory\armorycpplog.txt
Log file opened at 1481212719: C:\Users\Thomas\AppData\Roaming\Armory\armorycpplog.txt  armory ccplog

http://pastebin.com/b1K1Y77Y Armorylog

The beginning of the file (Armoylog) I got o cut some datas because data overflow for pastebin
Again thanks to goatpig as archow101 as well and my greatest appreciation for yor patience with me als old man

Now I am still running Armory and waiting for a miracle

well,I got your message.
But I was so happy,Armory started to build databases
anyway I hope the factory reset will work.
Thanks for your advice.

That's the most extreme option...

You should refrain from trying to fix a problem you do not understand. If run into a roadblock, the best thing to do is to post your log files here and wait for a response.

Somehow I managed to get a watch-only copy installed in Armory.I have no offline option of armory at my laptop-programms.
While building databases  I got suddenly the notification (this happened already sometimes before) ArmoryQt does not work.
So I decided to make a factory reset (the lighest option) and now I am waiting for the result
I will report .


Edit:what is the reason for Armory does not work?
How to fix it?

Either let it finish scanning, or import the wallet in offline mode, then restart in online mode.

please cross all your fingers for me,that the download of a new chipset was the only trouble my laptop made

I did what goatpig advised and here is the new log

http://pastebin.com/i42V9wZd

How can I import a watch-only copy,because armory always says: Armory is in the middle of scanning ....cannot import an account.

Thank you for your help,but now my laptop dos not run properly.
I had already contact with the DELL-Support.
It might ber possible the laptop has to be send to the factory and get repaired.
Will report to you

Thank you for your help,but now my laptop dos not run properly.
I had already contact with the DELL-Support.
It might ber possible the laptop has to be send to the factory and get repaired.
Will report to you

Too many log files. Delete armorylog.txt, armorycpplog.txt and dbLog.txt. Then run Armory again, then post the new logs.


Build is done, run ArmoryQt, it will start scanning.