Hey there,
Just a heads up you posted in the wrong section of the forum. This section is for Bitcoin only. Your Gpu mining question belongs in Altcoin mining
Specifically here is a thread with a lot of knowledgeable people, some of whom I remember talking about them. Search through the thread and if you don't see what you need post your question again.
Reported to Mods, they will move this post
EDIT: I also found this thread for the B250
Topic: Asus B250 Mining Expert 19 slot board - Struggling with cards and Simpleminer OS (Read 145 times)
April 17, 2018, 02:25:08 AM
April 17, 2018, 02:14:16 AM
Good Day.
I want to know if anyone has experience with the Asus B250 Mining Expert 19 slot board? Recently got this board for x6 new RX570's, and running simpleminer OS for the rig. The first two gpu's (GPU0 and GPU1) get stuck at core and mem clocks of 300mhz each, the rest are where they should be. As i understand it , they are supposed to ,out-of-the-box and without rom flashing, be able to mine 24mh/s after overclocking. So two of the cards refuse to run at more than 300/mhz core and mem clock, and the other 4 will jump to 24mh/s and then reduce down to 8 or less mh/s. I have a another 6 RX570's running perfectly on a Biostar board and using simpleminer OS.
This Asus B250 Mining Expert board has tons of BIOS features and settings and im wondering if it isnt maybe that that is the reason why those 570's arent running stable?
I have g4 encoding enabled, intel virtualization disabled, pci slots on gen2 etc. Any help would be much appreciated.
Kind Regards
I want to know if anyone has experience with the Asus B250 Mining Expert 19 slot board? Recently got this board for x6 new RX570's, and running simpleminer OS for the rig. The first two gpu's (GPU0 and GPU1) get stuck at core and mem clocks of 300mhz each, the rest are where they should be. As i understand it , they are supposed to ,out-of-the-box and without rom flashing, be able to mine 24mh/s after overclocking. So two of the cards refuse to run at more than 300/mhz core and mem clock, and the other 4 will jump to 24mh/s and then reduce down to 8 or less mh/s. I have a another 6 RX570's running perfectly on a Biostar board and using simpleminer OS.
This Asus B250 Mining Expert board has tons of BIOS features and settings and im wondering if it isnt maybe that that is the reason why those 570's arent running stable?
I have g4 encoding enabled, intel virtualization disabled, pci slots on gen2 etc. Any help would be much appreciated.
Kind Regards
Jump to: