--set-clocks-vddc/-oscv
I missed that Cool
Topic: aticonfig syntax/input data? - page 2. (Read 7430 times)
or just use glakkeclock
That looks interesting too. I wonder if he'll add a --set-vddc--set-clocks-vddc/-oscv
You will have to either:
a: Flash the bios on your cards with RBE to remove the memory limit
b: Use the latest 11.7 preview drivers to bypass bios overclocking limits
c: Maybe use ATIOverdrive
a: I understand that after you determine the best values to use, you should just flash the bios with them. I need to look at what that process involves.a: Flash the bios on your cards with RBE to remove the memory limit
b: Use the latest 11.7 preview drivers to bypass bios overclocking limits
c: Maybe use ATIOverdrive
b: lost me there
c: I remember seeing something about ATIOverdrive. I'll look into that.
Thanks
or just use glakkeclock
That looks interesting too. I wonder if he'll add a --set-vddcThank you as well
or just use glakkeclock
You will have to either:
a: Flash the bios on your cards with RBE to remove the memory limit
b: Use the latest 11.7 preview drivers to bypass bios overclocking limits
c: Maybe use ATIOverdrive
a: Flash the bios on your cards with RBE to remove the memory limit
b: Use the latest 11.7 preview drivers to bypass bios overclocking limits
c: Maybe use ATIOverdrive
I guess I need someone to hold my hand for this.
I've been trying to figure out how to overclock my 5770s with absolutely no luck and a lot of FRUSTRATION!
Thanks to Inaba's help, I can now start my miners.
poclbm$ ./poclbm.py --server=http://:@us.eclipsemc.com:8337 --worksize=128 -v -f 8 --device=1
But I want to tune them for maximum output.
Currently I have
poclbm$ aticonfig --odgc --adapter=all
Adapter 0 - ATI Radeon HD 5700 Series
Core (MHz) Memory (MHz)
Current Clocks : 900 1200
Current Peak : 900 1200
Configurable Peak Range : [500-1080] [1200-1450]
GPU load : 99%
Adapter 1 - ATI Radeon HD 5700 Series
Core (MHz) Memory (MHz)
Current Clocks : 900 1200
Current Peak : 900 1200
Configurable Peak Range : [500-1080] [1200-1450]
GPU load : 59%
I've found posts that suggest running the memory at 300 and the GPU at 1000, plus or minus.
Also seen where a guy raises the voltage just slighty as part of the setup.
I believe aticonfig can do all but adjust the voltage but when I try to use it, I get an error.
poclbm$ aticonfig --od-enable
ATI Overdrive(TM) enabled
poclbm$ aticonfig --odsc=900,300
ERROR - Set clocks failed for Default Adapter - ATI Radeon HD 5700 Series
Please check that input values were valid
Doesn't seem to matter if I use --adapter=0 (or 1)
Here's one card when not mining (just for reference)
poclbm$ aticonfig --odgc --adapter=1
Adapter 1 - ATI Radeon HD 5700 Series
Core (MHz) Memory (MHz)
Current Clocks : 157 300
Current Peak : 900 1200
Configurable Peak Range : [500-1080] [1200-1450]
GPU load : 0%
I even tried setting the rig up with windows so I could use the oh-so-easy graphical overclocking tools available. I finally managed to get guiminer to recognize one of the cards but it wouldn't mine.
Yes, I'm that stupid.
Someone please tell me what I'm doing wrong this time.
I've been trying to figure out how to overclock my 5770s with absolutely no luck and a lot of FRUSTRATION!
Thanks to Inaba's help, I can now start my miners.
poclbm$ ./poclbm.py --server=http://
But I want to tune them for maximum output.
Currently I have
poclbm$ aticonfig --odgc --adapter=all
Adapter 0 - ATI Radeon HD 5700 Series
Core (MHz) Memory (MHz)
Current Clocks : 900 1200
Current Peak : 900 1200
Configurable Peak Range : [500-1080] [1200-1450]
GPU load : 99%
Adapter 1 - ATI Radeon HD 5700 Series
Core (MHz) Memory (MHz)
Current Clocks : 900 1200
Current Peak : 900 1200
Configurable Peak Range : [500-1080] [1200-1450]
GPU load : 59%
I've found posts that suggest running the memory at 300 and the GPU at 1000, plus or minus.
Also seen where a guy raises the voltage just slighty as part of the setup.
I believe aticonfig can do all but adjust the voltage but when I try to use it, I get an error.
poclbm$ aticonfig --od-enable
ATI Overdrive(TM) enabled
poclbm$ aticonfig --odsc=900,300
ERROR - Set clocks failed for Default Adapter - ATI Radeon HD 5700 Series
Please check that input values were valid
Doesn't seem to matter if I use --adapter=0 (or 1)
Here's one card when not mining (just for reference)
poclbm$ aticonfig --odgc --adapter=1
Adapter 1 - ATI Radeon HD 5700 Series
Core (MHz) Memory (MHz)
Current Clocks : 157 300
Current Peak : 900 1200
Configurable Peak Range : [500-1080] [1200-1450]
GPU load : 0%
I even tried setting the rig up with windows so I could use the oh-so-easy graphical overclocking tools available. I finally managed to get guiminer to recognize one of the cards but it wouldn't mine.
Yes, I'm that stupid.
Someone please tell me what I'm doing wrong this time.
Jump to: