Thanks for those suggestions.
Another data point. It just rebooted and this time I immediatly copied the log file. I believe it rebooted due to a spurious temperture signal. TMAX was 89C and yet on reboot it was back to the normal 75C. I've been keeping the web viewer open and looking at temps and what not whenever I think about it and the temps are steady. The unit is located in the basement and there is no external heat source. Also it just running stock firmware 21102801_4ec6bb0_ea6647e.
So far it rebooted 3 time since yesterday, 12/30/21 @ 14:35, 12/31/21 @ 6:16 and 12:27
I'll give that FMS tool a try! and report back!
Happy New Year!!!
Topic: Avalon 1246 acting strange HELP - page 2. (Read 527 times)
If that fan is automatically adjusted to a different speed without temp changes then you can try this one below
Install FMS tool and go to diagnostic and put this command below
[{"command":"ascset","parameter":"0,fan-spd,100"}]
Fan speed will be fixed to 100% you can change it depending on your ASIC temp status.
You can download the FMS tool from this link https://download.canaan-creative.com/fms/
Download the latest one and let see if it will fix your issue.
Install FMS tool and go to diagnostic and put this command below
[{"command":"ascset","parameter":"0,fan-spd,100"}]
Fan speed will be fixed to 100% you can change it depending on your ASIC temp status.
You can download the FMS tool from this link https://download.canaan-creative.com/fms/
Download the latest one and let see if it will fix your issue.
New to mining and just got my 1246 up and running on the 28th. It hash rate is 86TH/s on "High Performance" mode and 72TH/s on "Normal Mode" it's making money so good 
But it's fans are cycling from about 2200rpm to 2800rpm about every 20sec. Also it has "rebooted" twice for no appeant reason. It's running cool enough I believe, high is 75C on H0 and H1 and 73C on H2.
Is this normal?
Thanks
But it's fans are cycling from about 2200rpm to 2800rpm about every 20sec. Also it has "rebooted" twice for no appeant reason. It's running cool enough I believe, high is 75C on H0 and H1 and 73C on H2.
Is this normal?
Thanks
did it reboot twice
in an hour
in a day
in a week
in an hour is an issue
in a day not so much
in a week no worries
not sure why the fans are pluseing every 20 sec
i think there is a way to set a fixed speed say 50%
there was a thread that mentioned it
New to mining and just got my 1246 up and running on the 28th. It hash rate is 86TH/s on "High Performance" mode and 72TH/s on "Normal Mode" it's making money so good
But it's fans are cycling from about 2200rpm to 2800rpm about every 20sec. Also it has "rebooted" twice for no appeant reason. It's running cool enough I believe, high is 75C on H0 and H1 and 73C on H2.
Is this normal?
Thanks
But it's fans are cycling from about 2200rpm to 2800rpm about every 20sec. Also it has "rebooted" twice for no appeant reason. It's running cool enough I believe, high is 75C on H0 and H1 and 73C on H2.
Is this normal?
Thanks
Jump to: