is anyone using the 20130810 klovias software?
Where I can read about this FW? 
Topic: Avalon batch [3] countdown! - page 2. (Read 56642 times)
is anyone using the 20130810 klovias software?
customs are just doing their job... stupid avalon team could have print an invoice in dollars instead of sending
the invoice in an "unknown" "local" currency!
are they out of printers
the invoice in an "unknown" "local" currency!
are they out of printers
--avalon-auto is my other setting. i am running tests at 375. at 350 I get 83.x gh/s tops. I am going to try hooking up a portable A/C and maybe a box fan when I get home.
Pay close attention to your HW Error rate. At a certain point overclocking only produces more errors, not more hashes!
i have my 3 module doing ~82ghash/sec 73-85F room temperature on a 850w Seasonic Gold Modular P/S.
I am curious to know your frequency and how hot your sensors are reading in that environment.
Thanks!
[fan1] => 2640
[fan2] => 0
[fan3] => 2640
[temp1] => 31
[temp2] => 71
[temp3] => 56
[temp_max] => 71
hashing 82.5 gh/s I want to OC it more...who has experience with OC it past 85gh/s?
I am considering a box fan OR using my Portable AC 10000 BTU Unit OR lowering temp in my apartment to 73F 24/7
Hi greaterninja,
It is great to be able to compare. Did you enable either --avalon-auto or --avalon-fans on this configuration?
Regarding your overclocking questions, the unit is basically new. I would let it run at this rate for another few days, before pushing it past 85gh/s. The extra cooling will definitely be needed if you have a sensor at 71.
I work with hardware and have previous experience pushing other types of gear really hard. This is my first BTC miner, figured I would treat it like the rest of my equipment.
Thanks for the numbers!
--avalon-auto is my other setting. i am running tests at 375. at 350 I get 83.x gh/s tops. I am going to try hooking up a portable A/C and maybe a box fan when I get home.
i have my 3 module doing ~82ghash/sec 73-85F room temperature on a 850w Seasonic Gold Modular P/S.
I am curious to know your frequency and how hot your sensors are reading in that environment.
Thanks!
[fan1] => 2640
[fan2] => 0
[fan3] => 2640
[temp1] => 31
[temp2] => 71
[temp3] => 56
[temp_max] => 71
hashing 82.5 gh/s I want to OC it more...who has experience with OC it past 85gh/s?
I am considering a box fan OR using my Portable AC 10000 BTU Unit OR lowering temp in my apartment to 73F 24/7
Hi greaterninja,
It is great to be able to compare. Did you enable either --avalon-auto or --avalon-fans on this configuration?
Regarding your overclocking questions, the unit is basically new. I would let it run at this rate for another few days, before pushing it past 85gh/s. The extra cooling will definitely be needed if you have a sensor at 71.
I work with hardware and have previous experience pushing other types of gear really hard. This is my first BTC miner, figured I would treat it like the rest of my equipment.
Thanks for the numbers!
Received 4 mod Avalon today... nicely packed, but 9db antenna is missing... have to find replacement! Came with 101.24BTC invoice and they read BTC symbol = $, so that saved quite lot!
They stated all batches after the first come with NO accessories or power cords.
So no antenna is normal.
Received 4 mod Avalon today... nicely packed, but 9db antenna is missing... have to find replacement! Came with 101.24BTC invoice and they read BTC symbol = $, so that saved quite lot!
Whoaaa... now it´s hashing! Took some time figure out everything, but basicly quite easy! i have my 3 module doing ~82ghash/sec 73-85F room temperature on a 850w Seasonic Gold Modular P/S.
I am curious to know your frequency and how hot your sensors are reading in that environment.
Thanks!
[fan1] => 2640
[fan2] => 0
[fan3] => 2640
[temp1] => 31
[temp2] => 71
[temp3] => 56
[temp_max] => 71
hashing 82.5 gh/s I want to OC it more...who has experience with OC it past 85gh/s?
I am considering a box fan OR using my Portable AC 10000 BTU Unit OR lowering temp in my apartment to 73F 24/7
Received 4 mod Avalon today... nicely packed, but 9db antenna is missing... have to find replacement! Came with 101.24BTC invoice and they read BTC symbol = $, so that saved quite lot!
i have my 3 module doing ~82ghash/sec 73-85F room temperature on a 850w Seasonic Gold Modular P/S.
I am curious to know your frequency and how hot your sensors are reading in that environment.
Thanks!
i have my 3 module doing ~82ghash/sec 73-85F room temperature on a 850w Seasonic Gold Modular P/S.
My question is what is the most one of you guys have pushed your Batch #2 or #3 to?
My question is what is the most one of you guys have pushed your Batch #2 or #3 to?
My Avalon is stuck in spanish customs.. they tell hand writing invoice is not enough :@
I opened ticket in Avalon store but they didn't answer after 24h... Anyway I can contact faster with them?
I don't want to get stuck 1 week in stupid customs...
I opened ticket in Avalon store but they didn't answer after 24h... Anyway I can contact faster with them?
I don't want to get stuck 1 week in stupid customs...
From my own experience... don't expect a happy end
Mas por aqui: https://bitcointalksearch.org/topic/m.2705021
OMG, why they work so bad? I'm sorry for you my friend
48h waiting for answering my ticket... and still no response.... great work Avalon...
The room is at 64 degrees with plenty of fresh air.
The hottest sensor in the Avalon is reading at 63-64, the others are at 50 and 25. My understanding from reading the Avalon users thread is that 70 degrees on a batch 3, is the old 50 degrees on batch 1 and 2 due to the new sensor.
I turned down the overclocking a bit and going to let these burn in for the next couple of days. It is easy to get excited and turn it up.
The hottest sensor in the Avalon is reading at 63-64, the others are at 50 and 25. My understanding from reading the Avalon users thread is that 70 degrees on a batch 3, is the old 50 degrees on batch 1 and 2 due to the new sensor.
I turned down the overclocking a bit and going to let these burn in for the next couple of days. It is easy to get excited and turn it up.
The unit is running happily at 79 gigahashes on the pool. It was slowly overclocked to 347 Mhz over the past 5 hours, both unit and temperatures have been stable. Calculations at this speed show ROI will be met.
what ambient temperature is in the place you are?
If anyone wants to buy a part of a 4 module with me, then let me know. I will sell 50% of the 4 module (2 modules) for 82 btc. I will host the Avalon provided we split the wattage cost which is about ~1kw-~1.2kw/hour. The deal is through someone I bought part of an Avalon with already and he is willing to sell the whole unit to me. So essentially earnings will be 50/50 and power bill will be 50/50. I can even give transparency on the mining account too. Max OC is predicted to be 109GH/S so .5 of 109 = 54.66GH/S To be conservative lets say its 105GH/S.
**actually i can do a better deal than 82btc, but I prefer 82 btc
**actually i can do a better deal than 82btc, but I prefer 82 btc
Happy to report my 3 module order #90XX arrived.
The unit is running happily at 79 gigahashes on the pool. It was slowly overclocked to 347 Mhz over the past 5 hours, both unit and temperatures have been stable. Calculations at this speed show ROI will be met.
Would be cool to add an extra module. Anyone know if/when upgrade modules will be available?
Happy hashing to all
Akhentek
The unit is running happily at 79 gigahashes on the pool. It was slowly overclocked to 347 Mhz over the past 5 hours, both unit and temperatures have been stable. Calculations at this speed show ROI will be met.
Would be cool to add an extra module. Anyone know if/when upgrade modules will be available?
Happy hashing to all
Akhentek
My Avalon is stuck in spanish customs.. they tell hand writing invoice is not enough :@
I opened ticket in Avalon store but they didn't answer after 24h... Anyway I can contact faster with them?
I don't want to get stuck 1 week in stupid customs...
I opened ticket in Avalon store but they didn't answer after 24h... Anyway I can contact faster with them?
I don't want to get stuck 1 week in stupid customs...
From my own experience... don't expect a happy end
Mas por aqui: https://bitcointalksearch.org/topic/m.2705021
My Avalon is stuck in spanish customs.. they tell hand writing invoice is not enough :@
I opened ticket in Avalon store but they didn't answer after 24h... Anyway I can contact faster with them?
I don't want to get stuck 1 week in stupid customs...
I opened ticket in Avalon store but they didn't answer after 24h... Anyway I can contact faster with them?
I don't want to get stuck 1 week in stupid customs...
Did anyone at all received a 4 module without PSU unit yet?
I did, and I can't seem to get the damn thing to power up. I've tried two brand new PSU. AX 850 and an OCZ 1250. Both of them wont even power the fans. I don't understand why, I have my buddy helping me, we have even opened up my batch 2 to compare PSU. I can connect into the server but i can not get her to power up.
Has anyone had the same problem?
I figured it out, i had 4xPCIe (6+2pin) cables plugged into the all 4 of the slots on the PDU. I needed to plug in 2xPCIe (6+2pin) and 2xCPU (4+4pin) into the 4 slots. Now she is purring like a sexy little kitten.
Jump to: