Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 254. (Read 703547 times)

Awesome Miner Version 5.7.9 ( Development preview of 5.8 )

This release includes updated mining software version and a few corrections and adjustments based on recent feedback. JCE GPU miner is also added.

Next week you can expect the new Mining History feature to be included in the development release. The idea is to show what you have been mining (software, pools, coins, algorithms) for the selected period of time. In the example below only a single miner is selected, but you will be able to select any number of miners to see what they all have been mining in total.



The plan is also to add a list of the selected miners to be able to sort them by revenue, profit, mining time and so on in order to find low performing miners for the selected period of time.

On the remote mining rig where you run MSI Afterburner Remote Server, port 82 should be listening. It's fine that no IP is listed as it indicates that it will listen on any IP address.

Some troubleshooting suggestions:
1) Verify that MSI Afterburner Remote Server itself is responding on port 82. On your mining rig where it's running, use a web browser and navigate to http://localhost:82/macm
If you get a password dialog, the service is running fine.

2) You can also review the Awesome Miner Remote Agent log file. If you search for "GPU clocking" you will find the communication related to MSI Afterburner Remote Server - and you might be able to see if there are any errors here.

@nordmann666
Cant PM newbies so ill post it here

Not sure if you use remote miners, or local (same machine AM is installed on). All my miners are remote.  shouldnt matter much either way.

You need to navigate to the AM folder that the mining software is located in. If auto downloaded it should be
C:\Users\#YOUR_USER#\AppData\Roaming\AwesomeMinerService

Then locate the config.txt file and update it as needed.

Now in AM go to manage miner properties>command line> in the code box "Parameters to mining software" need to add
-c config.txt

Thats assuming you keep the config.txt file the same name as it is.  I create several for testing and just change the names as you will see in my screen shot its -c config944.txt

This rig in mining CN_Haven average about 1150 per gpu RX570 8gb

can you please tell me how to manage the config.txt that jce used within awesome miner? PN would be nice
THX

Please make a choice for ProgPow too. Thank.

And I can make myself so that there would be a choice or there was no choice in different miners on my own?

The next release of Awesome Miner will use the new download URL's for ProgPow. You can manually enter it in the Options dialog, Managed Software section, as a workaround for the moment.

I will also make sure the GPU selection dialog be made available for T-rex and take a look at the progpow miner device selection as well.

Hi Patrike,

you have this nice new feature:
The Check Statistics trigger can compare the hashrate of a miner with a percent value of the hashrate in the profit profile.

Can you extend that value to over 100%? This can be great in case you just update the mining software without new benchmarks and the new hashrate is much higher. So you can add a rule for example to highlight a miner when it hashes with 110%+.

https://www.dropbox.com/s/o7zey08mnfpzxtt/Captura%20de%20pantalla%202018-11-15%20a%20las%2011.27.37.png?dl=0
@PATRIKE, sorry to insist on a topic, but it is very important that you implement that you can choose the Exchange for each currency, you could only with Coinscalculator I know, but something is something.

I show you the image of BTX, which gets the price of Cryptopia that has the best price, but then in cryptopia the BTX wallet is not active, so I have to sell it in another exchange, but of course, the price is different, the auto profit is not adequate. Nor can I remove Cryptopia from the exchanges I use in CC because in other currencies it is correct.

This is another example, so there are many, it is necessary that we can choose the exchange to take the price of each currency that enters by Coinscalculator, it is one of its great advantages that we are not using.

https://www.dropbox.com/s/cipov9s887i2ht0/Captura%20de%20pantalla%202018-11-15%20a%20las%2015.29.18.png?dl=0
that's right? I have looked at the ports on the computer where AM is installed, and I see that port 82 has no assigned ip, I do not see that it has any activity. Is it correct? Is it normal for me not to have Rig change my OC?

I discovered several problems:



The link is not correct, please correct


The second problem:
After the above manipulations, I cannot select certain GPUs in the miner’s settings, how can I cure this?

This problem is only for the miner T-Rex. other miners can choose a GPU. This problem appeared after I launched the Progpow miner.

I tried to add a ProgPow miner on another PC and then in the T-rex miner, I could not select a GPU. This problem in t-Rex appears every time you try to add a new miner to ProgPow manually.
I do not understand how these different miners and algorithms are connected, but this is a fact.
How to be now? How to restore the choice of GPU in the miner T-rex?

progPow miner: --cuda-devices 0 --cuda-devices 2 - in order to choose GPU 0 and 2
Please fix it.

ProgPow correct link: https://github.com/BitcoinInterestOfficial/BitcoinInterest/releases/download/2.1/progpowminer-cuda-windows-0.16_final.zip

ok, I come to tell you an error that has been repeated after many versions,

Well, when you select several miners who are mining a specific currency and you want to change the pool in bulk this fails and you have no other option than to change the minaro one by one or apply a template en masse.

with the miner in question is with TeamRedMiner, I have not seen what happens with another for now

this only happens with the AMD miners, with the nvidia changes without problem.

thanks a good program and I never regret having bought it.

thank you

I have a problem and see if I can explain it and understand it.

I do not know why but I have a couple of rigs that some of the new miners did not add or have been added badly, especially when referring to Progpow. If I go to the RIG User / nameuser / Appdata / roaming / awesome I see that there is a folder for each of the miners that Awesome adds to their program, but the Progpow Nvidia Miner does not appear.

Comparing with other rigs, these miners do appear in the default folder of Awesome in Roaming.

These rigs that fail, if they have marked the miner, and I have even raised the miner as personalized or manual, but they do not work for me, they always give me the same mistake.

I do not know if deleting the profile of RIG2 in awesome and doing it again would be useful. Delete the remote in the Rig2 and all the folders and others. But I've already tried that and it has not worked for me either. A few days ago everything worked, I do not think they are the last drivers dated yesterday. a few days ago they worked perfectly.

The error they give me is the following

Initialize diagnostics (20)
Starting Diagnostics. Awesome Miner Remote Agent version: 5.7.8
OS: Microsoft Windows 10 Enterprise 64-bit
nVidia driver version: 416.94
Microsoft VC++ 2013 runtime installed: Yes
Microsoft VC++ 2015 runtime installed: Yes
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: ProgPowNvidiaMiner, Auto Download: False, EnginePath: progpowminer-cuda-windows_0.15.0_1\progpowminer-cuda-windows\progpowminer-cuda.exe, Subtype: Disabled, CustomExecutable:
Set clocking start profile: 52, 85 100--300 (when stopping, the following will be used: -1, type: Single, Use: False)
Properties: (WindowMode: ConsoleFormat, EngineType: ProgPowNvidiaMiner, IsProfitMiner: True)
====================================================================================================
C:\Users\truco\AppData\Local\AwesomeMinerService\UploadedSoftware\progpowminer-cuda-windows_0.15.0_1\progpowminer-cuda-windows\progpowminer-cuda.exe  -U -P stratum+tcp://trucobit:[email protected]:9166 --api-port 4028
====================================================================================================
>   m  19:28:12|main    |  progpowminer version 0.15.0.dev0
>   m  19:28:12|main    |  Build: windows / release +git. 08eb5d0
Mining Engine Process started, PID: 8380
>  cu  19:28:12|main    |  Using grid size 1024 , block size 512
> Error: clGetPlatformIDs

====================================================================================================
Unexpected exit of mining software. Possible cause: Incorrect configuration or crashing software
Diagnostics completed




-----------------
TEngo 6 nvidia rigs, I have all updated today to the latest version of driver 416.94, just before updating Progpow worked on all rigs, but after updating, some computers work and others do not. I do not quite understand.

I do not understand either because in the RIG2 and RIG1, even if the miner is marked, it is loaded in the rig, I have had to upload them as a personalized miner.

Please ask for a url to update the miner from custom in AM. Sometimes the computer is a little crazy.

Hello, Patrike
I want to ask you to add more deep options for profit statistics.
There are many situations when the profit value displayed in pool API is too high to be the truth (even for 24H average) and the miner switches to that pool and loose the time for mining nothing. I believe it is very simple to detect such high volatility situations reported by pool (not the real coins) and prevent switching miner to that pool.
To make Awesome Miner software the best of the best it will be perfect to add more deep statistics collection for a long time periods:
- collect absolutely all pool statistics for the selected algos every time during profit values requests: TTF, Block found log, current, esimate and average profit values (all together)
- give users full control how to display these info on the graph
- add more deep rules where user can write his own formulas using many different statistics values and make miner to ban the pool for some time
- volatility value display for each pool algo (based on awesome miner collected statistics)
- ban high volatility pool algos till the volatility becomes normal or other user defined changes will happen

High volatility coins and algos are the biggest problem when using BTC for payout. You will never have that profit, because the waiting time before exchange is too long for high volatility algo. So, the only way to control it is to ban unstable profit pool algos.

I use JCE GPU version with auto download works great.  Have to add the software thats it

Please, help. I now have mine problem in profit: not displayed and there is no choice of GPU

I discovered several problems:



The link is not correct, please correct


The second problem:
After the above manipulations, I cannot select certain GPUs in the miner’s settings, how can I cure this?
https://image.ibb.co/d6Rc9f/2018-11-15-13-24-19.png

This problem is only for the miner T-Rex. other miners can choose a GPU. This problem appeared after I launched the Progpow miner.

I tried to add a ProgPow miner on another PC and then in the T-rex miner, I could not select a GPU. This problem in t-Rex appears every time you try to add a new miner to ProgPow manually.
I do not understand how these different miners and algorithms are connected, but this is a fact.
How to be now? How to restore the choice of GPU in the miner T-rex?

progPow miner: --cuda-devices 0 --cuda-devices 2 - in order to choose GPU 0 and 2
Please fix it.

ProgPow correct link: https://github.com/BitcoinInterestOfficial/BitcoinInterest/releases/download/2.1/progpowminer-cuda-windows-0.16_final.zip