Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 346. (Read 703146 times)

Thanks the inquiry was totally for point 2. Thanks for accepting it on to do list.

It is doing same algo  same pool but keeps restarting at each interval

Yes, you can manually add a coin. Please go to the Options dialog, Coins&Profit section and add a User defined coin.

Please share additional details on this. Is the mining software crashing and Awesome Miner restart it? Or is it the profit switcher that makes a pool change (the pool can change even if the algorithm is the same), then right click on the miner and select View Details to get more insight about the recent changes to the profit switcher.

ConfigData.xml is located in this folder:
%appdata%\AwesomeMiner\

If you re-install your system, you can backup and later on restore this file to get all your Awesome Miner settings.

If you have a clean system and never started Awesome Miner, the folder above doesn't exist as it's being created the first time you launch Awesome Miner. You can either create the folder above manually and put the file there, or start Awesome Miner once and close it, and it will have created both the folder and a new ConfigData.xml that you can replace.

I've not used this mining software myself. It might be that it has API compatible to one of the existing software, but not the same benchmarking flags. Do you get the same issue no matter if you benchmark a single GPU or if you select to benchmark all combined?

Haven't used this for a bit and trying again.  I notice at least with Zergpool, it is restarting the miner after the time interval.  So even if it stays on the same algo, it still stops and restarts the miner.

So i upgraded my rig, and reinstalled awesome miner, it said to reinstall your config, to restore ConfigData.xml . I went to the location of your website, and the file is not there. Then I ran a search on the whole entire drive for it, and it simply does not exist. So , I can only conclude that these are old instructions. What I did is backup my entire Roaming folder until I hear back.

Thanks.

Vegas

@patrike

In coin section, can we add new coin by ourself?

1) You need to enter the API URL for a Block Explorer to get balance for a coin. In this case, go to Options dialog, Balance section and add a new entry where you specify this URL:
https://chainz.cryptoid.info/cann/api.dws

2) The small coins images are actually not updated with the custom image right now. I will take a note of this and make sure it's getting implemented later on.

Version 5.0.3 (Development preview of 5.1)

- GPU mining
--- Improved CcMiner API processing for differents units of reporting for GPU clock, memory clock and power usage
--- SRBMiner configuration page to override config.txt via a Profit profile
- Configuration
--- Included predefined profit profile for Intel CPU mining
--- Managed Hosts can be disabled, resulting in all related Managed Miners being disabled will be ignored by the rules and no remote connection will be made
--- The list of Managed Hosts in the Options dialog has been improved to include the number of related Managed Miners and a button to find hosts without miners
--- Added variable [MinerWorker] for the password field of pools, to include the 'Add to worker name' part of a miner in the password field
--- The Bulk Edit feature for miners in the Options dialog are accessible directly from the miner list
--- Profit profile can be configured to be excluded from the global setting to ignore pools with no accepted shares
--- Changed predefined Bytecoin algorithm to Cryptonight
--- Improved detection of Managed Hosts duplicates
- Features and integration
--- New source for exchange rates for display currencies (fiat currencies) as the current exchange rate provider will terminate their services June 1st 2018
--- Added a number of new block explorers for wallet balance
- User interface
--- Dashboard improved to display up to 8 top coins and algorithms for the active miners. Sorting is by number of active miners
--- Display the income as coins per day via the Customize Progress Field feature (see web site for usage example)
--- Display the current pool name in the miner list when using user defined mining software with API compatibility with known mining software
--- Default sort order for Online Services tab is on the Profit column and if sorted on another column, the Profit column is always used for secondary sort order
--- Benchmark results can be copied to clipboard
--- Added additional coin images
--- Automatically select the new miner added via the wizard, to make it easier to find
--- Improved display of small coin values in Coins&Profit section of Options dialog
--- The bottom panel of the main window can be made smaller
- Rules and API
--- Added Awesome Miner API for removing Managed Miners and Managed Hosts
--- Added software type and hashrate value per device for /api/miners
- Mining software
--- SRBMiner 1.5.3 with additional Cryptonight algorithms
--- DSTM ZCash miner 0.6.1
--- CpuMiner-Opt 3.8.8.1
- Corrections
--- Correction to Innosilicon A6 hash rate unit
--- Correction to display of name of custom Online Services where multiple custom services uses the same algorithm
--- Correction to Wait Action in rules, for scenarios with longer wait times
--- Correction to benchmark to include the 'Additional command line' configured per algorithm in the profit profile
--- Correction to network scan to allow including IP addresses ending with 255
--- Correction to profit factors for a few predefined pools
--- Minor corrections

(Items in blue are new since the previous development release)

To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates

Direct download links:
http://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
http://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

What about the balance and the drop down icons ?

Are you running 5.0.2 both for Awesome Miner and the Remote Agent, so the version is the same?

I would like to get an understanding how Awesome Miner starts the DSTM miner and what the profit switching decision looked like before that. Could you send me your Awesome Miner log file (toolbar: Tools -> Log File) via mail and let me know the exact time of the issue? Thanks

Are you running Awesome Miner version 5.0? If it still doesn't work, can you select the Antminer and send me an API-report (toolbar: Tools -> API Report) via e-mail? Thanks!

1) Thanks for your suggestions on this. It's an interesting concept. I assume the main reason is that you want this to not have to define the same actions in many rules. Where you also thinking that if the other rule to execute is selected to run only on specific miners, it will be applied for those specific miners when executed? So the first rule might perform action on Miner#1 and then execute another rule that might be specified to execute only on "Miner#2 and Miner#3" - or should it be configurable that the other rule also should execute on the original Miner#1?

2) Antminers only allows the #xnsub to be specified as part of the default pools (toolbar: Tools -> Antminer -> Default Pools). It's being ignored by the Antminer when you send it via Change/Add Pool operations.

If you set c=LTC on an Online Service, it will override the setting "c=BTC" you have on the Profit switching page - so the result will be c=LTC. The setting about "c=BTC" is to have a good default value unless you specify something yourself.

Good point. My thinking around this was that for people with less experience in mining would find it easier if it says "Bitcoin address", even if it for some pools can be configured to be LTC or another coin. "Wallet address" is a more correct description as you point out, but it might also confuse some users about what they should put in this field as it doesn't say "Bitcoin address" like some of the other fields. I appreciate your feedback on this and I will see if I can find a good description for everyone.

It's possible to follow all the GPU clocking commands that Awesome Miner send to MSI Afterburner if you search for "Executing GPU clocking command" in the Remote Agent log file. You can that verify exactly which commands that are being sent and when. Please get back to me if you find any issues.

In general, if Awesome Miner restarts a crashed mining process, it will apply the Start-clocking profile again.

Thanks for your suggestion, I see your point here. Your request has been noted.

The same mistake. If it goes to pool through the auto switch fails, if I choose the pool manually it does not fail. It is a mistake that sometimes arises, the other day in Rig1, now it happens to me in Rig2, a while ago it was going well .... It also has failed me in RIG4.

I have reviewed everything, if something was wrong, the pool would not work when I choose it, it is only in the auto switch and it happens alternately.

It is illogical that for miningpoolhub on lyra2z or Lyra2re2 I get DSTM error. And if I choose THE SAME group but manually, it does not fail.

Ver  5.0.2