[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 540.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Rodrigo8 on September 23, 2017, 12:08:21 PM

Quote from: patrike on September 10, 2017, 05:19:43 AM

Quote from: Rodrigo8 on September 09, 2017, 01:10:41 PM

Hi, I bought the Enterprise version.
I've used it with different miners with no problems. Only mining with autoswitch that could not make it work in any way.

My doubt is:
I use the NHML (Nicehash Mining Legacy). I installed the AM agent and tried to connect the miner, also ip, however unsuccessfully. How to make AM just see Nicehash mining?

I'm currently using AM just as a monitoring my rigs of which are managed by NHML 1.8.1.3

Thanks

I assume you are using External Miner concept in Awesome Miner to connect to the mining software started by the Nicehash mining software. In order for this to work, the mining software must have API enabled and you need to know on which port the Nicehash software uses for this. Once you found this information in the Nicehash software, it should simply be to connect to the IP and port from Awesome Miner.

I have the API but it's from the website (it's just one API for all miners together) , local software do not have one, how can I insert this API in the AM software so that I can monitor my rigs?

Awesome Miner can connect to the API's of the mining software (Claymore miner, Ccminer, ...) that is running on your mining rigs. Awesome Miner is not connecting to any website for this.

If you use the Managed Miner concept in Awesome Miner, all this will work out of the box. If you want to use the Nicehash application to launch mining software and only monitor from Awesome Miner with an External Miner, you do need to make sure that the Nicehash software enables the API (and which port) on the mining software for Awesome Miner to connect.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: insaniak on September 24, 2017, 01:51:03 AM

Quote from: puwaha on September 24, 2017, 01:19:27 AM

Quote from: insaniak on September 23, 2017, 09:09:56 PM

My rig keeps crashing when doing autoprofit mining. I was previously mining etherium just fine. What could be the problem?

If you have your rig tuned to do Eth, then start it as a profit miner... when it changes to a different algorithm, the GPU settings could be wrong. Your over/underclocks for Eth could be the wrong settings for a different more stressful algorithm. Also, if you have your rig running on the edge of what your PSU can handle... you may be running into an issue with the PSU not being able to deliver enough power for a stressful algo based on your previous tuning for Eth. How many, and what kind of GPUs are you running? What PSU are you running?

I am using 8x GTX 1070 with 1600 Watt EVGA plat PSU. I have restored the settings in msi and they are default with not OC. Not sure what the issue is I did notice that my CPU usage is very high around 70-80% when i was mining eth it was 30-40%

Can you try to click the Diagnostics button to see if you get any additional information? Like what mining software is being selected, which algorithm and then the output from the mining software. It could be that your GPU/drivers/system isn't compatible with this mining software, and then it can be unselected from the profit switcher. The first step is however to use Diagnostics to figure out more details.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: ordimans on September 24, 2017, 08:22:23 AM

@dev :

About Nicehash pool, if i switch to the pool by AM, the worker name is not take by Nicehash stats....
Bug, no in the feature, or problem from nicehash Huh

For example :

IF i put worker name S9_1 in AM, no worker name in stats.

If i use antminer webpage, it's OK.

Have an idea ?

Quote from: thiec on September 22, 2017, 07:28:37 PM

I use minera 0.8.0 to run my miner. Could i also use AM to monitor and manage also remote control it?

No success with Minera and S9 for me. I prefer AM Cheesy

I know that some characters cannot be used when setting worker names on the Antminers over the management interface. Even if these may work directly in the web for the Antminer, it may not work as expected from external applications like Awesome Miner.

I can't recall how the support for is for _ (underscore), but as a first try you could try to change from "S9_1" to just "S91" or similar.

ordimans

full member

Activity: 162

Merit: 100

@dev :

About Nicehash pool, if i switch to the pool by AM, the worker name is not take by Nicehash stats....
Bug, no in the feature, or problem from nicehash Huh

For example :

IF i put worker name S9_1 in AM, no worker name in stats.

If i use antminer webpage, it's OK.

Have an idea ?

Quote from: thiec on September 22, 2017, 07:28:37 PM

I use minera 0.8.0 to run my miner. Could i also use AM to monitor and manage also remote control it?

No success with Minera and S9 for me. I prefer AM Cheesy

insaniak

full member

Activity: 137

Merit: 100

Quote from: puwaha on September 24, 2017, 01:19:27 AM

Quote from: insaniak on September 23, 2017, 09:09:56 PM

My rig keeps crashing when doing autoprofit mining. I was previously mining etherium just fine. What could be the problem?

If you have your rig tuned to do Eth, then start it as a profit miner... when it changes to a different algorithm, the GPU settings could be wrong. Your over/underclocks for Eth could be the wrong settings for a different more stressful algorithm. Also, if you have your rig running on the edge of what your PSU can handle... you may be running into an issue with the PSU not being able to deliver enough power for a stressful algo based on your previous tuning for Eth. How many, and what kind of GPUs are you running? What PSU are you running?

I am using 8x GTX 1070 with 1600 Watt EVGA plat PSU. I have restored the settings in msi and they are default with not OC. Not sure what the issue is I did notice that my CPU usage is very high around 70-80% when i was mining eth it was 30-40%

puwaha

sr. member

Activity: 700

Merit: 294

Quote from: thiec on September 22, 2017, 07:28:37 PM

I use minera 0.8.0 to run my miner. Could i also use AM to monitor and manage also remote control it?

I'm not sure why you would want to. Awesome Miner would replace the need for minera. AM will download and control the mining software on your rig, giving you the aggregated stats and more. What kind of rigs do you have? If they are ASICs, then you just setup the ASICs as External Miners in AM, and AM can monitor and control them.

puwaha

sr. member

Activity: 700

Merit: 294

Quote from: insaniak on September 23, 2017, 09:09:56 PM

My rig keeps crashing when doing autoprofit mining. I was previously mining etherium just fine. What could be the problem?

If you have your rig tuned to do Eth, then start it as a profit miner... when it changes to a different algorithm, the GPU settings could be wrong. Your over/underclocks for Eth could be the wrong settings for a different more stressful algorithm. Also, if you have your rig running on the edge of what your PSU can handle... you may be running into an issue with the PSU not being able to deliver enough power for a stressful algo based on your previous tuning for Eth. How many, and what kind of GPUs are you running? What PSU are you running?

puwaha

sr. member

Activity: 700

Merit: 294

Quote from: insaniak on September 22, 2017, 01:49:37 PM

Thank you I'll give that a shot. Also is there a way I could have one rig mine at mph and another on zpool? I want to try and compare them.

Yes, go to the Managed Profit Miner settings for each rig, and click on the Override global profit switching pool settings and set one rig on only MPH, and another rig on just zpool.

insaniak

full member

Activity: 137

Merit: 100

My rig keeps crashing when doing autoprofit mining. I was previously mining etherium just fine. What could be the problem?

Rodrigo8

newbie

Activity: 52

Merit: 0

Quote from: patrike on September 10, 2017, 05:19:43 AM

Quote from: Rodrigo8 on September 09, 2017, 01:10:41 PM

Hi, I bought the Enterprise version.
I've used it with different miners with no problems. Only mining with autoswitch that could not make it work in any way.

My doubt is:
I use the NHML (Nicehash Mining Legacy). I installed the AM agent and tried to connect the miner, also ip, however unsuccessfully. How to make AM just see Nicehash mining?

I'm currently using AM just as a monitoring my rigs of which are managed by NHML 1.8.1.3

Thanks

I assume you are using External Miner concept in Awesome Miner to connect to the mining software started by the Nicehash mining software. In order for this to work, the mining software must have API enabled and you need to know on which port the Nicehash software uses for this. Once you found this information in the Nicehash software, it should simply be to connect to the IP and port from Awesome Miner.

I have the API but it's from the website (it's just one API for all miners together) , local software do not have one, how can I insert this API in the AM software so that I can monitor my rigs?

VicePrez

newbie

Activity: 7

Merit: 0

Feature request:

Add dual mining revenue under Coins and Online services for secondary coins.

Example:

https://imgur.com/nsYfJdG

thiec

hero member

Activity: 854

Merit: 502

I use minera 0.8.0 to run my miner. Could i also use AM to monitor and manage also remote control it?

The Cryptophilanthropist

full member

Activity: 231

Merit: 101

Quote from: hurrikane on September 22, 2017, 05:23:20 PM

Quote from: The Cryptophilanthropist on September 22, 2017, 05:10:24 PM

Quote from: The Cryptophilanthropist on September 22, 2017, 09:56:06 AM

Looking for a way to auto restart miners when accepted submissions is longer than 8 minutes.

This need is due to a problem with some of the yiimp pools I mine on, the miners don't drop, they hash

but no submit, if restarted all is ok. Also seems related to a particular coin or it's algo possibly.

Can anyone tell me how to do this if it is a feature? Thanks (running Enterprise Edition)

Apologies for quoting my own post, hoping someone can help.

You can go into:

Options => Rules => Accept Progress (first rule) => Edit

Under "Actions" click "Add"
"Miner Command"
"Restart miner"

Ta Da

I don't know how well this will work across the board for all algo's, but this is how I restart my rigs (reboot) when a card flakes out.

Thanks I'll try that....no wonder I missed how to do it, it was simple, LOL

hurrikane

newbie

Activity: 6

Merit: 0

Quote from: The Cryptophilanthropist on September 22, 2017, 05:10:24 PM

Quote from: The Cryptophilanthropist on September 22, 2017, 09:56:06 AM

Looking for a way to auto restart miners when accepted submissions is longer than 8 minutes.

This need is due to a problem with some of the yiimp pools I mine on, the miners don't drop, they hash

but no submit, if restarted all is ok. Also seems related to a particular coin or it's algo possibly.

Can anyone tell me how to do this if it is a feature? Thanks (running Enterprise Edition)

Apologies for quoting my own post, hoping someone can help.

You can go into:

Options => Rules => Accept Progress (first rule) => Edit

Under "Actions" click "Add"
"Miner Command"
"Restart miner"

Ta Da

I don't know how well this will work across the board for all algo's, but this is how I restart my rigs (reboot) when a card flakes out.

The Cryptophilanthropist

full member

Activity: 231

Merit: 101

Quote from: The Cryptophilanthropist on September 22, 2017, 09:56:06 AM

Looking for a way to auto restart miners when accepted submissions is longer than 8 minutes.

This need is due to a problem with some of the yiimp pools I mine on, the miners don't drop, they hash

but no submit, if restarted all is ok. Also seems related to a particular coin or it's algo possibly.

Can anyone tell me how to do this if it is a feature? Thanks (running Enterprise Edition)

Apologies for quoting my own post, hoping someone can help.

The Cryptophilanthropist

full member

Activity: 231

Merit: 101

Quote from: insaniak on September 22, 2017, 04:22:54 PM

Quote from: The Cryptophilanthropist on September 22, 2017, 03:52:11 PM

Quote from: insaniak on September 22, 2017, 03:20:55 PM

Quote from: The Cryptophilanthropist on September 22, 2017, 03:15:20 PM

Quote from: insaniak on September 22, 2017, 02:55:07 PM

Quote from: The Cryptophilanthropist on September 22, 2017, 02:42:40 PM

Quote from: insaniak on September 22, 2017, 02:13:55 PM

Quote from: tf2addict on September 22, 2017, 02:11:41 PM

Quote from: insaniak on September 22, 2017, 01:49:37 PM

Quote from: puwaha on September 22, 2017, 12:05:53 AM

Quote from: insaniak on September 21, 2017, 02:41:38 AM

Thank you for the detailed reply.

I do not mind having it convert to BTC or ETH as I can always sell that later. Now based of what youve said it seems easier to use zpool or mph to do this. I also tried using MPH and I still have coins sitting there not being credited from auto exchange.Is there a way I can have payouts automatically sent to my bittrex account and sold without having to transfer them manually? Ive used bittrex autosell feature before and it seems pretty great. Also what do you think th emost profitable way is? As of right now I got Zpool working great and it is switching for me and everything which is nice. All in all i just want to make sure im getting the most profiablility as I can out of this.

Yes, you just set your auto payout threshold to some number that you are comfortable with, and put in your Bittrex wallet address for that coin. You do have to do it on all the coins that you will be mining. Then on Bittrex setup the auto sell feature for those coins that you want it to convert directly to BTC.

I did say "some number you are comfortable with" because you are going to lose a little bit in the fee that MPH charges. I'm ok with 1%, so if the transaction fee on MPH is 0.01, with a minimum of 1.0 to process... then I set the auto payout threshold to 1.01. That way as soon as I've mined 1.01 of that coin, I'll get 1.0 sent immediately to Bittrex, which immediately sells it. I do this to make sure I get the coins to Bittrex as fast as possible so that the coin is still "hot" on the exchange. If you wait until you have a large number of coins, the coin my not be hot anymore and you wont get as much profit.

As I've said before, if you let MPH do the auto convert to BTC, they wait until you and everyone else has accumulated enough coins to make it worth MPH's while... by then the coin is probably not "hot" anymore and you are selling on the dips.

Thank you I'll give that a shot. Also is there a way I could have one rig mine at mph and another on zpool? I want to try and compare them.

Sure, why couldn't you? I wish I had two identical rigs to run such comparisons, it's impossible to otherwise.

How would I do that?

What is your mining rig? GPU's? How many?

I have 2 Rigs GTX 1070s (X8) AND 2 Rigs RX 580 8G (x7)

You can specify in your batch file which GPU's you want to use with -d 0,1,2 ...etc that would mine at one pool you choose with gpu 0,1 and 2 , then make another batch file with other pool and use -d 3,4,5 ...etc or however you want it

That's it just use -d (device) in the command line batch file

Is there a way I could do it with a completely seperate rig so say Rig 1 is Zpool and Rig 2 is MPH. As it stands right now I have under profit switching zpool selected and MPH and then under each miner I did override profit settings with MPH for one and zpool for the other, but they both mine the same pool.

I don't use profit switching feature I create templates, you could do the same and just apply the template to the miners you want to use on a given template.

This would go under the environment section correct? Could you provide an example of what you have as a template? Im not sure how id set it up.

SENT YOU PM, I CAN HELP YOU FROM THERE

insaniak

full member

Activity: 137

Merit: 100

Quote from: The Cryptophilanthropist on September 22, 2017, 03:52:11 PM

Quote from: insaniak on September 22, 2017, 03:20:55 PM

Quote from: The Cryptophilanthropist on September 22, 2017, 03:15:20 PM

Quote from: insaniak on September 22, 2017, 02:55:07 PM

Quote from: The Cryptophilanthropist on September 22, 2017, 02:42:40 PM

Quote from: insaniak on September 22, 2017, 02:13:55 PM

Quote from: tf2addict on September 22, 2017, 02:11:41 PM

Quote from: insaniak on September 22, 2017, 01:49:37 PM

Quote from: puwaha on September 22, 2017, 12:05:53 AM

Quote from: insaniak on September 21, 2017, 02:41:38 AM

Thank you for the detailed reply.

I do not mind having it convert to BTC or ETH as I can always sell that later. Now based of what youve said it seems easier to use zpool or mph to do this. I also tried using MPH and I still have coins sitting there not being credited from auto exchange.Is there a way I can have payouts automatically sent to my bittrex account and sold without having to transfer them manually? Ive used bittrex autosell feature before and it seems pretty great. Also what do you think th emost profitable way is? As of right now I got Zpool working great and it is switching for me and everything which is nice. All in all i just want to make sure im getting the most profiablility as I can out of this.

Yes, you just set your auto payout threshold to some number that you are comfortable with, and put in your Bittrex wallet address for that coin. You do have to do it on all the coins that you will be mining. Then on Bittrex setup the auto sell feature for those coins that you want it to convert directly to BTC.

I did say "some number you are comfortable with" because you are going to lose a little bit in the fee that MPH charges. I'm ok with 1%, so if the transaction fee on MPH is 0.01, with a minimum of 1.0 to process... then I set the auto payout threshold to 1.01. That way as soon as I've mined 1.01 of that coin, I'll get 1.0 sent immediately to Bittrex, which immediately sells it. I do this to make sure I get the coins to Bittrex as fast as possible so that the coin is still "hot" on the exchange. If you wait until you have a large number of coins, the coin my not be hot anymore and you wont get as much profit.

As I've said before, if you let MPH do the auto convert to BTC, they wait until you and everyone else has accumulated enough coins to make it worth MPH's while... by then the coin is probably not "hot" anymore and you are selling on the dips.

Thank you I'll give that a shot. Also is there a way I could have one rig mine at mph and another on zpool? I want to try and compare them.

Sure, why couldn't you? I wish I had two identical rigs to run such comparisons, it's impossible to otherwise.

How would I do that?

What is your mining rig? GPU's? How many?

I have 2 Rigs GTX 1070s (X8) AND 2 Rigs RX 580 8G (x7)

You can specify in your batch file which GPU's you want to use with -d 0,1,2 ...etc that would mine at one pool you choose with gpu 0,1 and 2 , then make another batch file with other pool and use -d 3,4,5 ...etc or however you want it

That's it just use -d (device) in the command line batch file

Is there a way I could do it with a completely seperate rig so say Rig 1 is Zpool and Rig 2 is MPH. As it stands right now I have under profit switching zpool selected and MPH and then under each miner I did override profit settings with MPH for one and zpool for the other, but they both mine the same pool.

I don't use profit switching feature I create templates, you could do the same and just apply the template to the miners you want to use on a given template.

This would go under the environment section correct? Could you provide an example of what you have as a template? Im not sure how id set it up.

The Cryptophilanthropist

full member

Activity: 231

Merit: 101

Quote from: insaniak on September 22, 2017, 03:20:55 PM

Quote from: The Cryptophilanthropist on September 22, 2017, 03:15:20 PM

Quote from: insaniak on September 22, 2017, 02:55:07 PM

Quote from: The Cryptophilanthropist on September 22, 2017, 02:42:40 PM

Quote from: insaniak on September 22, 2017, 02:13:55 PM

Quote from: tf2addict on September 22, 2017, 02:11:41 PM

Quote from: insaniak on September 22, 2017, 01:49:37 PM

Quote from: puwaha on September 22, 2017, 12:05:53 AM

Quote from: insaniak on September 21, 2017, 02:41:38 AM

Thank you for the detailed reply.

I do not mind having it convert to BTC or ETH as I can always sell that later. Now based of what youve said it seems easier to use zpool or mph to do this. I also tried using MPH and I still have coins sitting there not being credited from auto exchange.Is there a way I can have payouts automatically sent to my bittrex account and sold without having to transfer them manually? Ive used bittrex autosell feature before and it seems pretty great. Also what do you think th emost profitable way is? As of right now I got Zpool working great and it is switching for me and everything which is nice. All in all i just want to make sure im getting the most profiablility as I can out of this.

Yes, you just set your auto payout threshold to some number that you are comfortable with, and put in your Bittrex wallet address for that coin. You do have to do it on all the coins that you will be mining. Then on Bittrex setup the auto sell feature for those coins that you want it to convert directly to BTC.

I did say "some number you are comfortable with" because you are going to lose a little bit in the fee that MPH charges. I'm ok with 1%, so if the transaction fee on MPH is 0.01, with a minimum of 1.0 to process... then I set the auto payout threshold to 1.01. That way as soon as I've mined 1.01 of that coin, I'll get 1.0 sent immediately to Bittrex, which immediately sells it. I do this to make sure I get the coins to Bittrex as fast as possible so that the coin is still "hot" on the exchange. If you wait until you have a large number of coins, the coin my not be hot anymore and you wont get as much profit.

As I've said before, if you let MPH do the auto convert to BTC, they wait until you and everyone else has accumulated enough coins to make it worth MPH's while... by then the coin is probably not "hot" anymore and you are selling on the dips.

Thank you I'll give that a shot. Also is there a way I could have one rig mine at mph and another on zpool? I want to try and compare them.

Sure, why couldn't you? I wish I had two identical rigs to run such comparisons, it's impossible to otherwise.

How would I do that?

What is your mining rig? GPU's? How many?

I have 2 Rigs GTX 1070s (X8) AND 2 Rigs RX 580 8G (x7)

You can specify in your batch file which GPU's you want to use with -d 0,1,2 ...etc that would mine at one pool you choose with gpu 0,1 and 2 , then make another batch file with other pool and use -d 3,4,5 ...etc or however you want it

That's it just use -d (device) in the command line batch file

Is there a way I could do it with a completely seperate rig so say Rig 1 is Zpool and Rig 2 is MPH. As it stands right now I have under profit switching zpool selected and MPH and then under each miner I did override profit settings with MPH for one and zpool for the other, but they both mine the same pool.

I don't use profit switching feature I create templates, you could do the same and just apply the template to the miners you want to use on a given template.

insaniak

full member

Activity: 137

Merit: 100

Quote from: The Cryptophilanthropist on September 22, 2017, 03:15:20 PM

Quote from: insaniak on September 22, 2017, 02:55:07 PM

Quote from: The Cryptophilanthropist on September 22, 2017, 02:42:40 PM

Quote from: insaniak on September 22, 2017, 02:13:55 PM

Quote from: tf2addict on September 22, 2017, 02:11:41 PM

Quote from: insaniak on September 22, 2017, 01:49:37 PM

Quote from: puwaha on September 22, 2017, 12:05:53 AM

Quote from: insaniak on September 21, 2017, 02:41:38 AM

Thank you for the detailed reply.

I do not mind having it convert to BTC or ETH as I can always sell that later. Now based of what youve said it seems easier to use zpool or mph to do this. I also tried using MPH and I still have coins sitting there not being credited from auto exchange.Is there a way I can have payouts automatically sent to my bittrex account and sold without having to transfer them manually? Ive used bittrex autosell feature before and it seems pretty great. Also what do you think th emost profitable way is? As of right now I got Zpool working great and it is switching for me and everything which is nice. All in all i just want to make sure im getting the most profiablility as I can out of this.

Yes, you just set your auto payout threshold to some number that you are comfortable with, and put in your Bittrex wallet address for that coin. You do have to do it on all the coins that you will be mining. Then on Bittrex setup the auto sell feature for those coins that you want it to convert directly to BTC.

I did say "some number you are comfortable with" because you are going to lose a little bit in the fee that MPH charges. I'm ok with 1%, so if the transaction fee on MPH is 0.01, with a minimum of 1.0 to process... then I set the auto payout threshold to 1.01. That way as soon as I've mined 1.01 of that coin, I'll get 1.0 sent immediately to Bittrex, which immediately sells it. I do this to make sure I get the coins to Bittrex as fast as possible so that the coin is still "hot" on the exchange. If you wait until you have a large number of coins, the coin my not be hot anymore and you wont get as much profit.

As I've said before, if you let MPH do the auto convert to BTC, they wait until you and everyone else has accumulated enough coins to make it worth MPH's while... by then the coin is probably not "hot" anymore and you are selling on the dips.

Thank you I'll give that a shot. Also is there a way I could have one rig mine at mph and another on zpool? I want to try and compare them.

Sure, why couldn't you? I wish I had two identical rigs to run such comparisons, it's impossible to otherwise.

How would I do that?

What is your mining rig? GPU's? How many?

I have 2 Rigs GTX 1070s (X8) AND 2 Rigs RX 580 8G (x7)

You can specify in your batch file which GPU's you want to use with -d 0,1,2 ...etc that would mine at one pool you choose with gpu 0,1 and 2 , then make another batch file with other pool and use -d 3,4,5 ...etc or however you want it

That's it just use -d (device) in the command line batch file

Is there a way I could do it with a completely seperate rig so say Rig 1 is Zpool and Rig 2 is MPH. As it stands right now I have under profit switching zpool selected and MPH and then under each miner I did override profit settings with MPH for one and zpool for the other, but they both mine the same pool.

The Cryptophilanthropist

full member

Activity: 231

Merit: 101

Quote from: insaniak on September 22, 2017, 02:55:07 PM

Quote from: The Cryptophilanthropist on September 22, 2017, 02:42:40 PM

Quote from: insaniak on September 22, 2017, 02:13:55 PM

Quote from: tf2addict on September 22, 2017, 02:11:41 PM

Quote from: insaniak on September 22, 2017, 01:49:37 PM

Quote from: puwaha on September 22, 2017, 12:05:53 AM

Quote from: insaniak on September 21, 2017, 02:41:38 AM

Thank you for the detailed reply.

I do not mind having it convert to BTC or ETH as I can always sell that later. Now based of what youve said it seems easier to use zpool or mph to do this. I also tried using MPH and I still have coins sitting there not being credited from auto exchange.Is there a way I can have payouts automatically sent to my bittrex account and sold without having to transfer them manually? Ive used bittrex autosell feature before and it seems pretty great. Also what do you think th emost profitable way is? As of right now I got Zpool working great and it is switching for me and everything which is nice. All in all i just want to make sure im getting the most profiablility as I can out of this.

Yes, you just set your auto payout threshold to some number that you are comfortable with, and put in your Bittrex wallet address for that coin. You do have to do it on all the coins that you will be mining. Then on Bittrex setup the auto sell feature for those coins that you want it to convert directly to BTC.

I did say "some number you are comfortable with" because you are going to lose a little bit in the fee that MPH charges. I'm ok with 1%, so if the transaction fee on MPH is 0.01, with a minimum of 1.0 to process... then I set the auto payout threshold to 1.01. That way as soon as I've mined 1.01 of that coin, I'll get 1.0 sent immediately to Bittrex, which immediately sells it. I do this to make sure I get the coins to Bittrex as fast as possible so that the coin is still "hot" on the exchange. If you wait until you have a large number of coins, the coin my not be hot anymore and you wont get as much profit.

As I've said before, if you let MPH do the auto convert to BTC, they wait until you and everyone else has accumulated enough coins to make it worth MPH's while... by then the coin is probably not "hot" anymore and you are selling on the dips.

Thank you I'll give that a shot. Also is there a way I could have one rig mine at mph and another on zpool? I want to try and compare them.

Sure, why couldn't you? I wish I had two identical rigs to run such comparisons, it's impossible to otherwise.

How would I do that?

What is your mining rig? GPU's? How many?

I have 2 Rigs GTX 1070s (X8) AND 2 Rigs RX 580 8G (x7)

You can specify in your batch file which GPU's you want to use with -d 0,1,2 ...etc that would mine at one pool you choose with gpu 0,1 and 2 , then make another batch file with other pool and use -d 3,4,5 ...etc or however you want it

That's it just use -d (device) in the command line batch file

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 540. (Read 703512 times)