how do you combine your inputs in wallet? couldnt find the option to, so i just sent everything to myself. hope that worked. staked two inputs of 1k for 4 days and nothing. now combined to 2000
That might be the best solution
It isn't really worth to lose coin age if you have such high inputs, any inputs that are higher than 50 coins are fine for staking, once you go below 20-30 it gets really hard to stake.
Can you be more precise? You say 50 coins is "fine" meaning how often will they stake? Below 20-30, can you clarify what you mean by really hard to stake?
So I have inputs of 14-20 with 5000-10000 confirmations, meaning 20-40days without staking, when I get to the 40-50 input sizes, I see mostly between 100 and 4000 (so less than 17 days or about), above 60 input size, most coins are below 1000 with the unluckiest being still under 2000 (so from 4 to 8 days). I have inputs of 160 with 2k confirmations so it doesn't really matter how big it is after input size of 100.
Before the big reward increase, the staking was much easier, I got stakes almost every hour, at least 20 stakes in a day but then all of you started staking and it went down to like 5-10 stakes a day (even tho my balance did triple) so you can think of staking being "harder" by 6-12x than it was before but the reward increased 10x so basically nothing changed
Hi All,
I am having trouble doing an initial sync of the wallet.
I seem to have only 1 active connection to the B3-Coin network.
I am running B3-Coin version v2.0.0.2-B3 of the wallet.
What is the best way to get the sync started?
Should I create a .conf file with all the nodes in and place it in %appdata% ? If so, what should the filename be?
TIA.
It is a pain in the ass but.....if you add all the nodes individually in the console window you will be fine. I tried many variations on what the .conf file name should be and got no where. A good list of nodes is here
https://chainz.cryptoid.info/b3/#!network.
Open you wallet, click on help then debug window then console. Then in the bottom text box add each node using "addnode %ipaddress% add" one by one still you start getting connections. Once you have over 5 connections you should be good and it will find more peers on it's own.
If there was a way I would just post my peers.dat file here but I don't see a way of doing that.
That's not how you do it
on windows you go to %appdata/b3coin-V2 and add the nodes to b3coin.conf or in linux you go to $home/.B3-CoinV2 and do the same thing with b3coin.conf.
this should be inside that file
addnode=1.52.120.109
addnode=101.180.235.103
addnode=104.220.28.170
addnode=104.34.104.18
addnode=105.184.168.49
addnode=105.246.68.1
addnode=107.174.128.179
addnode=109.230.238.224
addnode=110.77.234.244
addnode=118.158.49.220
addnode=13.59.36.136
addnode=134.255.218.108
addnode=134.255.218.112
addnode=134.255.220.137
addnode=134.255.220.84
addnode=134.255.227.59
addnode=134.255.232.126
addnode=134.255.232.132
addnode=139.99.104.120
addnode=14.2.10.40
addnode=142.129.154.205
addnode=146.71.76.215
addnode=148.251.8.18
addnode=151.229.167.107
addnode=151.27.218.231
addnode=151.28.239.231
addnode=160.19.49.41
addnode=165.255.211.52
addnode=165.255.85.41
addnode=172.97.43.55
addnode=173.174.151.40
addnode=173.175.66.134
addnode=173.20.175.10
addnode=173.212.216.102
addnode=173.246.19.78
addnode=175.142.241.245
addnode=176.63.17.81
addnode=18.220.39.214
addnode=180.190.169.109
addnode=180.190.169.26
addnode=180.244.1.161
addnode=180.44.73.234
addnode=183.181.14.119
addnode=185.165.168.137
addnode=185.219.80.79
addnode=186.217.0.42
addnode=187.75.153.252
addnode=188.68.52.172
addnode=189.100.26.3
addnode=189.115.98.83
addnode=189.54.114.205
addnode=195.154.166.32
addnode=198.187.28.10
addnode=198.187.28.11
addnode=198.187.28.18
addnode=198.187.28.19
addnode=2.247.245.94
addnode=2.247.247.68
addnode=201.95.0.63
addnode=213.114.79.106
addnode=213.67.162.99
addnode=217.22.138.190
addnode=23.254.202.65
addnode=24.193.152.58
addnode=24.228.65.193
addnode=31.201.42.35
addnode=31.214.149.227
addnode=35.176.44.217
addnode=36.68.185.188
addnode=36.68.233.43
addnode=36.71.188.90
addnode=41.114.78.140
addnode=41.13.124.137
addnode=41.13.124.56
addnode=41.13.80.184
addnode=42.112.155.76
addnode=45.114.118.89
addnode=45.32.87.32
addnode=45.50.229.64
addnode=45.76.128.141
addnode=45.76.128.179
addnode=45.76.175.198
addnode=45.76.179.236
addnode=45.76.2.76
addnode=45.76.29.245
addnode=45.77.77.169
addnode=46.166.142.214
addnode=47.89.177.160
addnode=47.90.251.237
addnode=5.175.19.63
addnode=5.9.69.5
addnode=51.254.119.94
addnode=51.254.212.75
addnode=51.6.157.55
addnode=54.233.74.105
addnode=58.13.38.102
addnode=60.104.54.79
addnode=60.97.54.221
addnode=67.5.99.135
addnode=68.184.194.245
addnode=68.34.68.48
addnode=68.69.205.1
addnode=69.126.110.61
addnode=69.200.241.87
addnode=70.173.168.129
addnode=70.180.68.185
addnode=70.67.201.0
addnode=73.170.248.145
addnode=75.129.188.55
addnode=75.130.162.248
addnode=76.169.57.92
addnode=79.114.239.58
addnode=80.130.160.123
addnode=81.247.6.95
addnode=82.130.101.187
addnode=83.33.159.234
addnode=84.119.48.173
addnode=84.197.154.118
addnode=84.24.159.206
addnode=84.77.201.99
addnode=85.167.123.147
addnode=85.214.193.235
addnode=87.123.143.7
addnode=87.123.7.159
addnode=88.200.52.228
addnode=89.38.150.215
addnode=89.64.10.153
addnode=91.49.27.226
addnode=92.109.229.128
addnode=92.255.199.98
addnode=93.203.89.173
addnode=94.195.252.33
addnode=95.10.37.192
addnode=95.133.120.128
addnode=95.133.41.174
addnode=95.222.27.226
addnode=98.180.124.103
addnode=99.230.0.255
addnode=99.7.213.151
I've contacted cryptopia support and here is their answer:
