- Read through the entire ban message you've screenshotted carefully. Follow the (rather simple) instructions in it.
- Have you installed anything dodgy or even a bit suspect recently? Hell, have you ran any executables on your PC recently? If so, your PC may be compromised and changing your passwords (Bitcointalk or otherwise) on that PC is (probably) useless.
- Have you reused your previous password on other websites? Is your password just a few words (with maybe a few numbers added at the end or start, some random capitalization and maybe a few replaced letters)? Is your password short (less than 8 characters)? If you answered to any of these with "yes" (especially the first one), there's a possibility the attacker might've just managed to guess it.
- Have you recently been redirected to a Bitcointalk login screen (or at least what looks like it) via a link in a Bitcointalk PM you've received? If so, someone might've phished you out of your Bitcointalk password.
Topic: Badly need your help your guys. - page 2. (Read 400 times)
User LogitechMouse encountered the similar issue back in September, which was also about this Phoenix Mining stuffs in this thread.
Your best shot is signing a message from your staked address in here.
I saw the post you're referring to from one of the scraped post from LoyceV's Search Tool, but I am not sure if I should refer it in here as it contains the direct download link from Github. It's basically the changelog of the software, if that was indeed what you're referring to.
Your best shot is signing a message from your staked address in here.
I saw the post you're referring to from one of the scraped post from LoyceV's Search Tool, but I am not sure if I should refer it in here as it contains the direct download link from Github. It's basically the changelog of the software, if that was indeed what you're referring to.
Big thanks for this! Yes, it's the same case that happened to me a while ago. The unauthorized post that Logitechmouse did (https://archive.fo/8Xb0A) is identical to what I remember on the post I deleted. I already sent an email to the email address provided at the ban noticed. I hope I will get an update.
I can provide a signed message in ETH. The address I always used when asking loan for DarkStar. I hope it will consider as enough and strong proof.
Are you sure your account has been banned?
There is no record in modlog. Maybe, you have been banned temporarily?
Most probably, some one hacked your account and made that post.
Click here to see your IP logs in the past 30 days.
Do you see any strange IP address there?
There is no record in modlog. Maybe, you have been banned temporarily?
Most probably, some one hacked your account and made that post.
Click here to see your IP logs in the past 30 days.
Do you see any strange IP address there?
Yes, I'm 100% sure that everything is fine at my end. Referring to the post of @isaac_clark22 looks like a sort of program can breach anyone's account. I don't know how's that possible. Thanks for the response!
User LogitechMouse encountered the similar issue back in September, which was also about this Phoenix Mining stuffs in this thread.
Your best shot is signing a message from your staked address in here.
Credits to LoyceV
I saw the post you're referring to from one of the scraped post from LoyceV's Search Tool, but I am not going to directly refer it in here as it contains the direct download link from Github. It's basically the changelog of the software, if this was indeed what you're referring to.
Your best shot is signing a message from your staked address in here.
Credits to LoyceV
I saw the post you're referring to from one of the scraped post from LoyceV's Search Tool, but I am not going to directly refer it in here as it contains the direct download link from Github. It's basically the changelog of the software, if this was indeed what you're referring to.
Quote
The new version is finally ready. You can download PhoenixMiner 5.8c from here:
-
-
Changes in version 5.8c :
Full LHR disable mode -lhrdis 1 - yes (default), 0 - no
Added lock core clock
Fixed an issue causing crashing with some RTX 3060/3080/3090 cards
Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will
provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused
Increased the maximum supported DAG epoch to 600 (i.e. until about Sep 2023)
Implemented full hardware control for AMD RX6900/6800/6700 cards under Linux. Note that with these cards under Linux you need to specify relative core voltage: e.g. -
cclock -50 will set the core voltage to be 50 mV under the default value
Added ROCr kernels for Vega, Radeon VII and Navi cards. With these kernels you will be able to run these cards with Linux drivers 20.45 and later but the performance will
be lower than with the older PAL drivers and kernels. We recommend using AMD Linux driver 20.30 for all cards except RX6900/6800/6700
Fixed an issue causing crashing with some RX6900/6800/6700 cards under Linux (there is no need to run these cards with -clkernel 0 anymore)
Added support for AMD Windows drivers up to 21.8.1. Note that Radeon VII cards will not work with drivers 21.6.1 or higher - you need to use older drivers for proper
operation of these cards
Added support for AMD Linux drivers up to 21.20 (use older drivers for Vega or Radeon VII cards as they will not work with 21.20). Note that the latest 21.30 drivers are
not supported (and the initial testing shows that even the older Polars cards are not working properly with them, so avoid 21.30 for now)
Numerous other fixes and small improvements
Please let us know if you have any problems or questions related to PhoenixMiner 5.8c
-
-
Changes in version 5.8c :
Full LHR disable mode -lhrdis
Added lock core clock
Fixed an issue causing crashing with some RTX 3060/3080/3090 cards
Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will
provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused
Increased the maximum supported DAG epoch to 600 (i.e. until about Sep 2023)
Implemented full hardware control for AMD RX6900/6800/6700 cards under Linux. Note that with these cards under Linux you need to specify relative core voltage: e.g. -
cclock -50 will set the core voltage to be 50 mV under the default value
Added ROCr kernels for Vega, Radeon VII and Navi cards. With these kernels you will be able to run these cards with Linux drivers 20.45 and later but the performance will
be lower than with the older PAL drivers and kernels. We recommend using AMD Linux driver 20.30 for all cards except RX6900/6800/6700
Fixed an issue causing crashing with some RX6900/6800/6700 cards under Linux (there is no need to run these cards with -clkernel 0 anymore)
Added support for AMD Windows drivers up to 21.8.1. Note that Radeon VII cards will not work with drivers 21.6.1 or higher - you need to use older drivers for proper
operation of these cards
Added support for AMD Linux drivers up to 21.20 (use older drivers for Vega or Radeon VII cards as they will not work with 21.20). Note that the latest 21.30 drivers are
not supported (and the initial testing shows that even the older Polars cards are not working properly with them, so avoid 21.30 for now)
Numerous other fixes and small improvements
Please let us know if you have any problems or questions related to PhoenixMiner 5.8c
My main forum account is chaser15 and still shocked at what happened in my account just now. It got banned. Here's the story:
- I logged in at the forum
- Do my usual habit of posting. My first post for this day: https://bitcointalksearch.org/topic/m.58407216
- After posting, I've noticed that my signature (I'm part of the Stake signature campaign) is empty. Thinking it's just a bug I check my Profile Settings and to my surprise, my signature space is really empty.
- I immediately copy the signature at the Stake Campaign and update my profile.
- After that, I checked my Post History, and to my surprise, I have a post there that I didn't do! The thread is here: https://bitcointalksearch.org/topic/phoenixminer-62c-fastest-ethereumethash-miner-with-lowest-devfee-winlinux-2647654
There's also a merited post by me that I didn't do (check the archive page). After I checked the unauthorized post, I immediately archived the page at the archive.is website but unfortunately, while the archive is ongoing, I immediately deleted the unauthorized post thinking the page was already a snapshot. Now I don't have the copy of that unauthorized post but it's all about an update.
I changed my password immediately but after confirming, boom my account got banned. Is changing the password not allowed for now?
https://i.postimg.cc/J4PJhLHz/banchaser.png
- Is someone talented and skilled here can able to know the deleted post so that I can show the post I'm referring to?
- Is there a chance of unbanning accounts these days? I can provide all the information and proof needed to verify that I'm the original owner.
I don't understand how someone is able to know my password. As a forum Legendary rank and long-time internet geek, I'm not new to this security so I got shocked at what happened.
Many and big Thanks to those who will share their thoughts, views, opinions, etc. about this.
- I logged in at the forum
- Do my usual habit of posting. My first post for this day: https://bitcointalksearch.org/topic/m.58407216
- After posting, I've noticed that my signature (I'm part of the Stake signature campaign) is empty. Thinking it's just a bug I check my Profile Settings and to my surprise, my signature space is really empty.
- I immediately copy the signature at the Stake Campaign and update my profile.
- After that, I checked my Post History, and to my surprise, I have a post there that I didn't do! The thread is here: https://bitcointalksearch.org/topic/phoenixminer-62c-fastest-ethereumethash-miner-with-lowest-devfee-winlinux-2647654
There's also a merited post by me that I didn't do (check the archive page). After I checked the unauthorized post, I immediately archived the page at the archive.is website but unfortunately, while the archive is ongoing, I immediately deleted the unauthorized post thinking the page was already a snapshot. Now I don't have the copy of that unauthorized post but it's all about an update.
I changed my password immediately but after confirming, boom my account got banned. Is changing the password not allowed for now?
https://i.postimg.cc/J4PJhLHz/banchaser.png
- Is someone talented and skilled here can able to know the deleted post so that I can show the post I'm referring to?
- Is there a chance of unbanning accounts these days? I can provide all the information and proof needed to verify that I'm the original owner.
I don't understand how someone is able to know my password. As a forum Legendary rank and long-time internet geek, I'm not new to this security so I got shocked at what happened.
Many and big Thanks to those who will share their thoughts, views, opinions, etc. about this.
Jump to: