Baikal Giant X10 - page 51. | Bitcointalksearch.org

crytotronik

member

Activity: 147

Merit: 10

Quote from: bitcoinexplorer on February 14, 2018, 09:41:55 AM

Quote from: crytotronik on February 14, 2018, 09:03:37 AM

Quote from: bitcoinexplorer on February 14, 2018, 08:35:34 AM

Quote from: crytotronik on February 14, 2018, 07:21:04 AM

I was on Starpool the last 24 hours. I'm pretty happy with the outcome of 0.3 LTC. My miner had shares for all algos but X11. This is my password line:

c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5

I tried also single coin mining with nice profit on ALQO. I collected LIZ, LPA, ARGO and CURVE....lets see if I can sell them for a nice price.

All in all Starpool did a nice job for me.

Wow... are you sure its 0.3 LTC per X10 for 24 hours?

0.29364095 LTC to be more precise

Yes really! 24 hours on starpool. I will stay for some more days...

BTW: I have a lot of algo switches. Mining on skein also (dont forget the "=0.5" for skein). At the moment its on qubit.

Ok trying

stratum+tcp://all.starpool.biz
and in password c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5

But question is in X10 setting what algo do i choose because we must choose a algo!

Advise please, thank you.

You have to create a line (entry for a pool) for each Algo.

Like this:

stratum+tcp://skein.starpool.biz:4933
stratum+tcp://myr-gr.starpool.biz:5433
stratum+tcp://qubit.starpool.biz:4733
stratum+tcp://quark.starpool.biz:4033

Password for all lines:

c=YOUR_PAYOUT_COIN,quark=1,qubit=1,myr-gr=1,skein=0.5

Payout in Litecoin (lower transaction fees) would be:

c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5

if you want to include power consumption also, change the numbers a bit to prefer myr-gr and skein.

c=LTC,quark=1,qubit=1,myr-gr=1.1,skein=0.6

Found out and researched by myself, without any guarantee Wink

donifars

newbie

Activity: 3

Merit: 0

Quote from: fuaimo3 on February 14, 2018, 09:40:04 AM

Quote from: donifars on February 14, 2018, 07:26:33 AM

Starpool.

Need your advise. My hashrate dropped down from 50 to around 10GH/s. What might cause such a decrease?

Thanks

I spoke to the dev already you should see your hash rates fixed.

Thanks a lot. The hash rate went up again, may I ask you how was it fixed?

bitcoinexplorer

sr. member

Activity: 420

Merit: 255

Quote from: crytotronik on February 14, 2018, 09:03:37 AM

Quote from: bitcoinexplorer on February 14, 2018, 08:35:34 AM

Quote from: crytotronik on February 14, 2018, 07:21:04 AM

I was on Starpool the last 24 hours. I'm pretty happy with the outcome of 0.3 LTC. My miner had shares for all algos but X11. This is my password line:

c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5

I tried also single coin mining with nice profit on ALQO. I collected LIZ, LPA, ARGO and CURVE....lets see if I can sell them for a nice price.

All in all Starpool did a nice job for me.

Wow... are you sure its 0.3 LTC per X10 for 24 hours?

0.29364095 LTC to be more precise

Yes really! 24 hours on starpool. I will stay for some more days...

BTW: I have a lot of algo switches. Mining on skein also (dont forget the "=0.5" for skein). At the moment its on qubit.

Ok trying

stratum+tcp://all.starpool.biz
and in password c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5

But question is in X10 setting what algo do i choose because we must choose a algo!

Advise please, thank you.

fuaimo3

newbie

Activity: 46

Merit: 0

Quote from: donifars on February 14, 2018, 07:26:33 AM

Starpool.

Need your advise. My hashrate dropped down from 50 to around 10GH/s. What might cause such a decrease?

Thanks

I spoke to the dev already you should see your hash rates fixed.

bitcoinexplorer

sr. member

Activity: 420

Merit: 255

Quote from: crytotronik on February 14, 2018, 09:03:37 AM

Quote from: bitcoinexplorer on February 14, 2018, 08:35:34 AM

Quote from: crytotronik on February 14, 2018, 07:21:04 AM

I was on Starpool the last 24 hours. I'm pretty happy with the outcome of 0.3 LTC. My miner had shares for all algos but X11. This is my password line:

c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5

I tried also single coin mining with nice profit on ALQO. I collected LIZ, LPA, ARGO and CURVE....lets see if I can sell them for a nice price.

All in all Starpool did a nice job for me.

Wow... are you sure its 0.3 LTC per X10 for 24 hours?

0.29364095 LTC to be more precise

Yes really! 24 hours on starpool. I will stay for some more days...

BTW: I have a lot of algo switches. Mining on skein also (dont forget the "=0.5" for skein). At the moment its on qubit.

Thanks for your response,

please advise what port to use, i do understand that in c value i will use c=BTC,quark,qubit,myr-gr

stratum+tcp://.starpool.biz:

crytotronik

member

Activity: 147

Merit: 10

Quote from: bitcoinexplorer on February 14, 2018, 08:35:34 AM

Quote from: crytotronik on February 14, 2018, 07:21:04 AM

I was on Starpool the last 24 hours. I'm pretty happy with the outcome of 0.3 LTC. My miner had shares for all algos but X11. This is my password line:

c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5

I tried also single coin mining with nice profit on ALQO. I collected LIZ, LPA, ARGO and CURVE....lets see if I can sell them for a nice price.

All in all Starpool did a nice job for me.

Wow... are you sure its 0.3 LTC per X10 for 24 hours?

0.29364095 LTC to be more precise

Yes really! 24 hours on starpool. I will stay for some more days...

BTW: I have a lot of algo switches. Mining on skein also (dont forget the "=0.5" for skein). At the moment its on qubit.

bitcoinexplorer

sr. member

Activity: 420

Merit: 255

Quote from: crytotronik on February 14, 2018, 07:21:04 AM

I was on Starpool the last 24 hours. I'm pretty happy with the outcome of 0.3 LTC. My miner had shares for all algos but X11. This is my password line:

c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5

I tried also single coin mining with nice profit on ALQO. I collected LIZ, LPA, ARGO and CURVE....lets see if I can sell them for a nice price.

All in all Starpool did a nice job for me.

Wow... are you sure its 0.3 LTC per X10 for 24 hours?

donifars

newbie

Activity: 3

Merit: 0

Starpool.

Need your advise. My hashrate dropped down from 50 to around 10GH/s. What might cause such a decrease?

Thanks

crytotronik

member

Activity: 147

Merit: 10

I was on Starpool the last 24 hours. I'm pretty happy with the outcome of 0.3 LTC. My miner had shares for all algos but X11. This is my password line:

c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5

I tried also single coin mining with nice profit on ALQO. I collected LIZ, LPA, ARGO and CURVE....lets see if I can sell them for a nice price.

All in all Starpool did a nice job for me.

ufwiederguegs

newbie

Activity: 3

Merit: 0

Quote from: PhilippeD on February 12, 2018, 12:18:10 PM

Hi,
Sell my Giant X10
4500 €
Work very well, no problem with it
I live in France
Send me MP if you want my phone number to call me

I would be interested in your X10.

please send me a message

regards, Thomas

Gongolo

full member

Activity: 374

Merit: 101

Quote from: chup on February 14, 2018, 04:14:59 AM

Quote from: Gongolo on February 13, 2018, 06:41:13 PM

Sometimes, I also try to solo mine some new coins, when difficulty is low: unfortunately, I wasn't able to mine directly my own wallet using X10, so I had to install a little pool.

Linux or Windows? ^^^^^^^^^^^

Currently, the working one is linux (ubuntu).
I also installed a windows server, but it shows wrong hashrate values and offers less algos, so I am not using it.

chup

sr. member

Activity: 736

Merit: 262

Me, Myself & I

Quote from: Gongolo on February 13, 2018, 06:41:13 PM

Sometimes, I also try to solo mine some new coins, when difficulty is low: unfortunately, I wasn't able to mine directly my own wallet using X10, so I had to install a little pool.

Linux or Windows? ^^^^^^^^^^^

dmanukr

jr. member

Activity: 75

Merit: 1

Quote from: ismurdegus on February 09, 2018, 06:22:20 AM

Quote from: DVD_GR on February 09, 2018, 06:19:41 AM

If the device's asics are fpga's and programmed differently at B it will just never work...

On the control board there is a micro usb connector. I am sure is used to flash the controller onboard.

If we had the possibility to extract the firmware from a Giant B and flash it on an X10 board, I am sure will work

You would think they would use it for that.. but no, you have to take the Pi off the controller, remove the sd card and flash. The usb is evidently not used. It's just built into the Pi, as is a network adapter complete with antenna

dmanukr

jr. member

Activity: 75

Merit: 1

I'm looking for an x10 hash board, even if it doesnt work. Anyone?

fuaimo3

newbie

Activity: 46

Merit: 0

Well today it went back up for me. Nice hash does the same I guess sometimes it's better to do Nice hash sometimes better to mine direct. I saw Nice hash was high the last few days, as soon as the pool got less hash I started making more today. I show my 50 dollar payment from yesterday but has since doubled today. To each their own. I am putting 18 more miners on star pool tonight for a week to see how it averages out. SS from today's earnings although I only got 50 (25 per machine) yesterday. I haven't been bullshitting at all I just fluctuates for me a lot one day bam and one day 25 each idk.

https://imgur.com/a/05yOP

dmanukr

jr. member

Activity: 75

Merit: 1

Quote from: Gongolo on February 13, 2018, 06:41:13 PM

Quote from: fuaimo3 on February 13, 2018, 09:40:46 AM

Well I said it fluctuates, I only made 25 per machine yesterday. Guessing it all depends on how alt coins are doing. But so far the current 8 hour is looking better. Does anyone know a better pool?

I wasn't even making 20 a day on MPH and nice hash always has issues and pays about the same or less for me.

You shared a good opportunity, so thank you: forum is here to help each other.
Unfortunately, I earned 0.00207349 BTC after 24 hours, less than expected, but not so bad.
Personally, I prefer mining coin directly, without autoexchange, but LTC payouts are really a good option.

I am not a Nicehash fan, however it's currently a decent choice: it's paying 0.0030-0.0040 per day per X10 unit, payments are daily, no fees when you move from Nicehash internal wallet to Coinbase.

I tried also ahashpool.com, IMHO it was better some months ago, I stopped mining there when earning dropped.
It does autoexchange, payouts every day, but when your balance reach 0.01 BTC.

Sometimes, I also try to solo mine some new coins, when difficulty is low: unfortunately, I wasn't able to mine directly my own wallet using X10, so I had to install a little pool.

If you use (like me) awesome miner to manage your units, Nicehash and Ahashpool are supported.
Also Zpool is supported, but I didn't try to point my X10 there up to now.

Nicehash is my go to set it and leave it option. Double your .002 worst case

Gongolo

full member

Activity: 374

Merit: 101

Quote from: fuaimo3 on February 13, 2018, 09:40:46 AM

Well I said it fluctuates, I only made 25 per machine yesterday. Guessing it all depends on how alt coins are doing. But so far the current 8 hour is looking better. Does anyone know a better pool?

I wasn't even making 20 a day on MPH and nice hash always has issues and pays about the same or less for me.

You shared a good opportunity, so thank you: forum is here to help each other.
Unfortunately, I earned 0.00207349 BTC after 24 hours, less than expected, but not so bad.
Personally, I prefer mining coin directly, without autoexchange, but LTC payouts are really a good option.

I am not a Nicehash fan, however it's currently a decent choice: it's paying 0.0030-0.0040 per day per X10 unit, payments are daily, no fees when you move from Nicehash internal wallet to Coinbase.

I tried also ahashpool.com, IMHO it was better some months ago, I stopped mining there when earning dropped.
It does autoexchange, payouts every day, but when your balance reach 0.01 BTC.

Sometimes, I also try to solo mine some new coins, when difficulty is low: unfortunately, I wasn't able to mine directly my own wallet using X10, so I had to install a little pool.

If you use (like me) awesome miner to manage your units, Nicehash and Ahashpool are supported.
Also Zpool is supported, but I didn't try to point my X10 there up to now.

fuaimo3

newbie

Activity: 46

Merit: 0

Well I said it fluctuates, I only made 25 per machine yesterday. Guessing it all depends on how alt coins are doing. But so far the current 8 hour is looking better. Does anyone know a better pool?

I wasn't even making 20 a day on MPH and nice hash always has issues and pays about the same or less for me.

jb7032

full member

Activity: 182

Merit: 100

Im up to $6.75 for the last 8 hours. Still hoping to see this magical $50/day. Not sure how much longer I will ride this out.

chup

sr. member

Activity: 736

Merit: 262

Me, Myself & I

Quote from: fuaimo3 on February 12, 2018, 06:19:27 PM

Does someone know how to incorporate skien? Make it only hash if it's a certain profit like .08? I believe this will increase profits but i'm not good at setting up difficulty on these pools.

I believe You should put 0.5 for skein in password string because hashrate is half of other algos. If You would like to cover power difference between algos, it will take more to calculate algo multipliers, but it is also changing with change of unit profitability.

Topic: Baikal Giant X10 - page 51. (Read 132903 times)