Topic: Baikal Mini Cube (Read 3644 times)
Hey, I am having this same Miner: 111 Connection Refused issue on my Giant x10... has anyone had any luck? When I find the solution I will follow up here.
Hi guys / gals
I need some assistance.
I've just got my very 1st Baikal Mini Cube.
Powered it up ...all seemed good.
Set the pools to mine to my account.
Boom Miner is down.
I've tried the obvious turn it off and on ....no good
I've tried pressing the reset button "Miner 111 connection refused"
When it 1st powers on I see a red/blue/orange light
At the moment the red light is on / the blue light is flashing / orange light is off.
On my miner screen all there is, is this -----> Miner loading - Pi 7m 41s - Temp 51°C - Load 1.64
I need some assistance.
I've just got my very 1st Baikal Mini Cube.
Powered it up ...all seemed good.
Set the pools to mine to my account.
Boom Miner is down.
I've tried the obvious turn it off and on ....no good
I've tried pressing the reset button "Miner 111 connection refused"
When it 1st powers on I see a red/blue/orange light
At the moment the red light is on / the blue light is flashing / orange light is off.
On my miner screen all there is, is this -----> Miner loading - Pi 7m 41s - Temp 51°C - Load 1.64
I am baikal X10, but it has become the same situation.
When turning on the power and turning it on a bit, the red lamp lights up, the blue light blinks, the green lights go out, and it becomes Minerdown.
Even if softreset is done, it will be "Miner: 111 connection refused".
How did everyone get out of this situation?
Having exactly the same issue with my new Baikal X10 miners. No solution either so far. Could anyone give helpful advice here?
Thanks!
Hi guys / gals
I need some assistance.
I've just got my very 1st Baikal Mini Cube.
Powered it up ...all seemed good.
Set the pools to mine to my account.
Boom Miner is down.
I've tried the obvious turn it off and on ....no good
I've tried pressing the reset button "Miner 111 connection refused"
When it 1st powers on I see a red/blue/orange light
At the moment the red light is on / the blue light is flashing / orange light is off.
On my miner screen all there is, is this -----> Miner loading - Pi 7m 41s - Temp 51°C - Load 1.64
I need some assistance.
I've just got my very 1st Baikal Mini Cube.
Powered it up ...all seemed good.
Set the pools to mine to my account.
Boom Miner is down.
I've tried the obvious turn it off and on ....no good
I've tried pressing the reset button "Miner 111 connection refused"
When it 1st powers on I see a red/blue/orange light
At the moment the red light is on / the blue light is flashing / orange light is off.
On my miner screen all there is, is this -----> Miner loading - Pi 7m 41s - Temp 51°C - Load 1.64
I am baikal X10, but it has become the same situation.
When turning on the power and turning it on a bit, the red lamp lights up, the blue light blinks, the green lights go out, and it becomes Minerdown.
Even if softreset is done, it will be "Miner: 111 connection refused".
How did everyone get out of this situation?
Hi! did you manage to activate the wireless mode?
BTW, it seems likely that with the appropriate changes made in that file you could also enable and configure the wifi and use the miner wirelessly.
Hi guys / gals
I need some assistance.
I've just got my very 1st Baikal Mini Cube.
Powered it up ...all seemed good.
Set the pools to mine to my account.
Boom Miner is down.
I've tried the obvious turn it off and on ....no good
I've tried pressing the reset button "Miner 111 connection refused"
When it 1st powers on I see a red/blue/orange light
At the moment the red light is on / the blue light is flashing / orange light is off.
On my miner screen all there is, is this -----> Miner loading - Pi 7m 41s - Temp 51°C - Load 1.64
I need some assistance.
I've just got my very 1st Baikal Mini Cube.
Powered it up ...all seemed good.
Set the pools to mine to my account.
Boom Miner is down.
I've tried the obvious turn it off and on ....no good
I've tried pressing the reset button "Miner 111 connection refused"
When it 1st powers on I see a red/blue/orange light
At the moment the red light is on / the blue light is flashing / orange light is off.
On my miner screen all there is, is this -----> Miner loading - Pi 7m 41s - Temp 51°C - Load 1.64
I had the same failure on receipt of a used a2000. It was the Cumcast network cable i connected. I swapped out to a CenturyLink network cable and the A2k booted right up and started mining!
Some else had posted the cable problem too. So that is where I started and ENDED! Thank you so much for pointing out the trivialty!
Having the same issue. I'll try your approach
Edit1: It didn't work. I'm now reflashing the disk img. and setting dhcp with 8.8.8.8. as dns. Lets see how it goes.
Edit2: Reflashing the orange pi image https://drive.google.com/drive/folders/0B1GBwN5-i39VRzNQS28tWlpsTVk works, but whenever I modify the mining pools (or erase them) the issue comes back. Left IP to DHCP
Edit3:Reflashed the card again, rebooted again.
Edit 4 SOLVED:
After reflashing the card, I found out that the issue came from the settings in the Pool settings. Password has to be left to X. I am testing now with the https://www2.coinmine.pl/dash/ pool and its working.
i have a spare baikal pi if you want for $50 in btc
Edit1: It didn't work. I'm now reflashing the disk img. and setting dhcp with 8.8.8.8. as dns. Lets see how it goes.
Edit2: Reflashing the orange pi image https://drive.google.com/drive/folders/0B1GBwN5-i39VRzNQS28tWlpsTVk works, but whenever I modify the mining pools (or erase them) the issue comes back. Left IP to DHCP
Edit3:Reflashed the card again, rebooted again.
Edit 4 SOLVED:
After reflashing the card, I found out that the issue came from the settings in the Pool settings. Password has to be left to X. I am testing now with the https://www2.coinmine.pl/dash/ pool and its working.
Ok so it turns out my PI was not booting up....no idea why.
Here's what I did that resolved the issue.
I powered off
Connected the miner to my pc via usb
Moved the jumper from L to H and powered on
The lights went like Christmas lights but the pc did not detect the miner.
I then powered off and reset the jumper ....powered on ...working?
I dont know what or why but it worked so I just wanted to post an update in case it helps anyone else
Here's what I did that resolved the issue.
I powered off
Connected the miner to my pc via usb
Moved the jumper from L to H and powered on
The lights went like Christmas lights but the pc did not detect the miner.
I then powered off and reset the jumper ....powered on ...working?
I dont know what or why but it worked so I just wanted to post an update in case it helps anyone else
i have a spare baikal pi if you want for $50 in btc
Having the same issue. I'll try your approach
i have a spare baikal pi if you want for $50 in btc
Ok so it turns out my PI was not booting up....no idea why.
Here's what I did that resolved the issue.
I powered off
Connected the miner to my pc via usb
Moved the jumper from L to H and powered on
The lights went like Christmas lights but the pc did not detect the miner.
I then powered off and reset the jumper ....powered on ...working?
I dont know what or why but it worked so I just wanted to post an update in case it helps anyone else
Here's what I did that resolved the issue.
I powered off
Connected the miner to my pc via usb
Moved the jumper from L to H and powered on
The lights went like Christmas lights but the pc did not detect the miner.
I then powered off and reset the jumper ....powered on ...working?
I dont know what or why but it worked so I just wanted to post an update in case it helps anyone else
i have a spare baikal pi if you want for $50 in btc
Is anyone else mining on nicehash?
I have two cubes mining there and they seem to be pulling in about $120/week right now...
I have two cubes mining there and they seem to be pulling in about $120/week right now...
Thats seems great in compare with Dash calculator result:
Which is better with another calculator:
However they are making good profit
hmm not sure what is up with cryptocompare in your screen shot there but that seems like a crazy low estimate on their part
The lowest payment Ive had from Nicehash over the last three weeks is $110.. they have only been running for three weeks haha
i shall count my blessings while they last(hoping the ibelink hype was just that..hype)
Is anyone else mining on nicehash?
I have two cubes mining there and they seem to be pulling in about $120/week right now...
I have two cubes mining there and they seem to be pulling in about $120/week right now...
Thats seems great in compare with Dash calculator result:
Which is better with another calculator:
However they are making good profit
Is anyone else mining on nicehash?
I have two cubes mining there and they seem to be pulling in about $120/week right now...
I have two cubes mining there and they seem to be pulling in about $120/week right now...
To set up static IP on your cube do the following.
SSH into the miner with user/pass: baikal/baikal
The command below opens a text editor for the file you want to modify:
sudo nano /etc/network/interfaces
Add some lines like what I have in the code box below (modified accordingly for your network). I added these below the line that starts with "source-directory" and above the lines that all start with the # symbol.
Hit ctrl+x to exit the editor
It will ask you if you want to save, hit y to save
It will ask you for the file name but it will default to the one you are already editing so just hit the enter key to confirm the default
At this point you can run "sudo nano /etc/network/interfaces" again to confirm the file now contains your changes if you want, but if you did everything correctly you don't need to. Restart the miner with the power switch and it will come up on the new static IP.
BTW, it seems likely that with the appropriate changes made in that file you could also enable and configure the wifi and use the miner wirelessly.
SSH into the miner with user/pass: baikal/baikal
The command below opens a text editor for the file you want to modify:
sudo nano /etc/network/interfaces
Add some lines like what I have in the code box below (modified accordingly for your network). I added these below the line that starts with "source-directory" and above the lines that all start with the # symbol.
Code:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.0.100
netmask 255.255.255.0
gateway 192.168.0.1
dns-nameservers 8.8.4.4 8.8.8.8
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.0.100
netmask 255.255.255.0
gateway 192.168.0.1
dns-nameservers 8.8.4.4 8.8.8.8
Hit ctrl+x to exit the editor
It will ask you if you want to save, hit y to save
It will ask you for the file name but it will default to the one you are already editing so just hit the enter key to confirm the default
At this point you can run "sudo nano /etc/network/interfaces" again to confirm the file now contains your changes if you want, but if you did everything correctly you don't need to. Restart the miner with the power switch and it will come up on the new static IP.
BTW, it seems likely that with the appropriate changes made in that file you could also enable and configure the wifi and use the miner wirelessly.
I tried to make cube to have static IP, but it seems that it's not stable after that, simple says connection refused. Other Baikals like mini, or Giant do not have that problem, all of them have static IP's, but cube seems that do not like static ip. On DHCP , cube is running with no problems at all. Any suggestion to fix this erro "connection refused with static IP" on CUBE?
What are you guys mining with your cube?
Yeah....,and what is the say best 3 pools that payout in whatever?
I"m just mining to P2Pool. Got a Rasberry PI on order so I can run my own P2Pool as there isnt one in my country.
I changed a non working cube from the 3G modem to a broadband router, and now it is working... can anybody explain it? I need to connect it through the 3G modem...
Sorry for the late reply, I just noticed your post. You have to configure your default router DNS to 8.8.8.8, that's what I did to get it working. You can start by entering 192.168.1.1 or 192.168.0.1 depending on the router you're using.. Hope it works for you!What are you guys mining with your cube?
Yeah....,and what is the say best 3 pools that payout in whatever?
I"m just mining to P2Pool. Got a Rasberry PI on order so I can run my own P2Pool as there isnt one in my country.
And I guess you are mining Dash?
Yup, mining dash, i looked at multipools etc but for x11 they were mining dash anyway but had fees. Bought a PI, set up P2Pool and now fees and earnings are all mine.
I am mining MUE at https://pool.weminemue.com becaue Whattomine tells me it's $12.88/day DASH being $10.53. Also since it's quark and not X11 (but it will change to X11 in the future sometime it uses less power.
I have 1 Cube (300mh/s) and one mini (150mh/s)
According to th stats on the pool the cube is using sgminer/5.5.2-b but the mini is using sgminer/4.9.4.
Is there any way I can upgrade my mini to sgminer/5.5.2-b? It would be nice if I could just go into the console of the mini and just do wget or somekind of upgrape script. I'm a bit scared of flashing firmware on the mini because I have read of so many people having trouble getting the USB drivers in Windows to see the mini properly. It's rather difficult to understand any of he suport pages on the Baikal site because they seem to be in Chinglish
If anyone can point me at an easy way to update the mini I would appreciate it immensely.
I guess since the mini works I shouldn't mess with it.
I have 1 Cube (300mh/s) and one mini (150mh/s)
According to th stats on the pool the cube is using sgminer/5.5.2-b but the mini is using sgminer/4.9.4.
Is there any way I can upgrade my mini to sgminer/5.5.2-b? It would be nice if I could just go into the console of the mini and just do wget or somekind of upgrape script. I'm a bit scared of flashing firmware on the mini because I have read of so many people having trouble getting the USB drivers in Windows to see the mini properly. It's rather difficult to understand any of he suport pages on the Baikal site because they seem to be in Chinglish
If anyone can point me at an easy way to update the mini I would appreciate it immensely.
I guess since the mini works I shouldn't mess with it.
I changed a non working cube from the 3G modem to a broadband router, and now it is working... can anybody explain it? I need to connect it through the 3G modem...
Hi guys / gals
I need some assistance.
I've just got my very 1st Baikal Mini Cube.
Powered it up ...all seemed good.
Set the pools to mine to my account.
Boom Miner is down.
I've tried the obvious turn it off and on ....no good
I've tried pressing the reset button "Miner 111 connection refused"
When it 1st powers on I see a red/blue/orange light
At the moment the red light is on / the blue light is flashing / orange light is off.
On my miner screen all there is, is this -----> Miner loading - Pi 7m 41s - Temp 51°C - Load 1.64
I need some assistance.
I've just got my very 1st Baikal Mini Cube.
Powered it up ...all seemed good.
Set the pools to mine to my account.
Boom Miner is down.
I've tried the obvious turn it off and on ....no good
I've tried pressing the reset button "Miner 111 connection refused"
When it 1st powers on I see a red/blue/orange light
At the moment the red light is on / the blue light is flashing / orange light is off.
On my miner screen all there is, is this -----> Miner loading - Pi 7m 41s - Temp 51°C - Load 1.64
I'm having the same issue you were having. I tried your fix. No change so far though.
I don't understand what you mean. It's connected to a D-Link DIR-860L router.
I am using an LTE modem and the cube does not boot either (blue light flashing). What dou you mean by "changing the DNS to 8.8.8.8"?
What are you guys mining with your cube?
Yeah....,and what is the say best 3 pools that payout in whatever?
I"m just mining to P2Pool. Got a Rasberry PI on order so I can run my own P2Pool as there isnt one in my country.
And I guess you are mining Dash?
What are you guys mining with your cube?
Yeah....,and what is the say best 3 pools that payout in whatever?
I"m just mining to P2Pool. Got a Rasberry PI on order so I can run my own P2Pool as there isnt one in my country.
What are you guys mining with your cube?
Yeah....,and what is the say best 3 pools that payout in whatever?
Jump to: