Topic: Baikal X10 ⚡OVERCLOCK⚡ Claim reward 0.2 BTC for TUTORIAL HOW TO :)⚡⚡⚡⚡ - page 16. (Read 22768 times)
January 24, 2018, 05:32:47 AM
pi zero can also be overclocked
January 24, 2018, 04:58:39 AM
I can overclock to 1Ghz with no evidence, please give me all your money 
January 24, 2018, 02:26:59 AM
NOW !!! Pay 0.2 BTC for working tutorial how to OVERCLOCK Baikal x10
from 300MHz to 400 Mhz [/size]
from 300MHz to 400 Mhz [/size]
Can you show the screen with overclocked system?
January 23, 2018, 04:12:02 PM
I have successfuly overclocked the miner to 400mhz, however the controller's firmware has a fixed hashrate so overclocking makes 0 difference.
January 23, 2018, 03:08:49 PM
After getting access to a X10 I was able to verify that it will NOT work. The baikal-options setting is being completely ignored in this software. I also tried to discover which algos are the ones that are working but hidden. It's not included in this compile of sgminer either. I tried every one it could possibly be to no avail.
I'm still working on it. It'll just take a little longer than expected.
I'm still working on it. It'll just take a little longer than expected.
January 23, 2018, 09:07:56 AM
I have a X10, i look with console and script are located to :/opt/scripta/etc/ for conf and /opt/scripta/bin/sgminer for exe
sgminer version is :5-6-2-1(or l)
So if someone know variable of this version to overclock, you can post here
Up: probably special version because we use "baikal-fan" :"100" ;
Up2:
sgminer version is :5-6-2-1(or l)
So if someone know variable of this version to overclock, you can post here
Up: probably special version because we use "baikal-fan" :"100" ;
Up2:
Code:
sgminer 5.6.2-l
Usage: /opt/scripta/bin/sgminer [-kDdElLLmpPQqUsTouvOchnV]
Options for both config file and command line:
--algorithm|--kernel|-k Set mining algorithm and most common defaults, default: scrypt
--api-allow Allow API access only to the given list of [G:]IP[/Prefix] addresses[/subnets]
--api-description Description placed in the API status header, default: sgminer version
--api-groups API one letter groups G:cmd:cmd[,P:cmd:*...] defining the cmds a groups can use
--api-listen Enable API, default: disabled
--api-mcast Enable API Multicast listener, default: disabled
--api-mcast-addr API Multicast listen address
--api-mcast-code Code expected in the API Multicast message, don't use '-'
--api-mcast-des Description appended to the API Multicast reply, default: ''
--api-mcast-port API Multicast listen port (default: 4028)
--api-network Allow API (if enabled) to listen on/for any address, default: only 127.0.0.1
--api-port Port number of miner API (default: 4028)
--balance Change multipool strategy from failover to even share balance
--blake-compact Set SPH_COMPACT_BLAKE64 for Xn derived algorithms (Can give better hashrate for some GPUs)
--compact Use compact display without per device statistics
--debug|-D Enable debug output
--debug-log Enable debug logging when stderr is redirected to file
--default-profile Set Default Profile
--description Pool description
--device|-d Select device to use, one value, range and/or comma separated (e.g. 0-2,4) default: all
--disable-rejecting Automatically disable pools that continually reject shares
--expiry|-E Upper bound on how many seconds after getting work we consider a share from it stale (default: 28)
--event-on Select event type to perform task on
--event-runcmd Command to perform on event
--event-reboot Reboot the system on event
--event-reboot-delay Delay in seconds to wait before rebooting
--event-quit Quit sgminer on event
--event-quit-message Quit message when quitting sgminer on event
--failover-only Don't leak work to backup pools when primary pool is lagging
--failover-switch-delay Delay in seconds before switching back to a failed pool (default: 60)
--fix-protocol Do not redirect to a different getwork protocol (eg. stratum)
--incognito Do not display user name in status window
--hotplug Seconds between hotplug checks (0 means never check)
--more-notices Shows work restart and new block notices, hidden by default
--load-balance Change multipool strategy from failover to quota based balance
--log|-l Interval in seconds between log output (default: 5)
--log-file|-L Log stderr to file
--log-show-date|-L Show date on every log line
--lowmem Minimise caching of shares for low memory applications
--monitor|-m Use custom pipe cmd for output messages
--name|--pool-name Name of pool
--net-delay Impose small delays in networking to not overload slow routers
--nfactor Override default scrypt N-factor parameter.
--no-client-reconnect Disable 'client.reconnect' stratum functionality
--no-restart Do not attempt to restart GPUs that hang
--no-submit-stale Don't submit shares if they are detected as stale
--no-extranonce|--pool-no-extranonce Disable 'extranonce' stratum subscribe for pool
--pass|--pool-pass|-p Password for bitcoin JSON-RPC server
--per-device-stats Force verbose mode and output per-device statistics
--pool-algorithm|--pool-kernel|--pool-algo Set algorithm for pool
--pool-backup Mark this pool as a backup for simple connect strategy
--extranonce|--pool-extranonce Enable 'extranonce' stratum subscribe for pool
--priority|--pool-priority Pool priority
--profile-algorithm|--profile-kernel Set algorithm for profile
--protocol-dump|-P Verbose dump of protocol-level activities
--queue|-Q Minimum number of work items to have queued (0+) (default: 1)
--quiet|-q Disable logging output, display status and errors
--quota|--pool-quota|-U quota;URL combination for server with load-balance strategy quotas
--real-quiet Disable all output
--remove-disabled Remove disabled devices entirely, as if they didn't exist
--rotate Change multipool strategy from failover to regularly rotate at N minutes (default: 0)
--round-robin Change multipool strategy from failover to round robin on failure
--scan-time|-s Upper bound on time spent scanning current work, in seconds (default: 60)
--sched-start Set a time of day in HH:MM to start mining (a once off without a stop time)
--sched-stop Set a time of day in HH:MM to stop mining (will quit without a start time)
--sharelog Append share log to file
--shares Quit after mining N shares (default: unlimited)
--socks-proxy Set socks4 proxy (host:port)
--show-coindiff Show coin difficulty rather than hash value of a share
--state|--pool-state Specify pool state at startup (default: enabled)
--keepalive|--pool-keepalive Specify pool if keepalived method is used (default: false)
--switcher-mode Algorithm/gpu settings switcher mode.
--syslog Use system log for output messages (default: standard error)
--tcp-keepalive TCP keepalive packet idle time (default: 30)
--text-only|-T Disable ncurses formatted screen output
--url|--pool-url|-o URL for bitcoin JSON-RPC server
--usb USB device selection
--user|--pool-user|-u Username for bitcoin JSON-RPC server
--verbose|-v Log verbose output to stderr as well as status output
--vote Optional vote value for decred blocks (default: 0)
--watchpool-refresh Interval in seconds to refresh pool status (default: 30)
--userpass|--pool-userpass|-O Username:Password pair for bitcoin JSON-RPC server
--worktime Display extra work time debug information
--difficulty-multiplier (deprecated) Difficulty multiplier for jobs received from stratum pools
--baikal-options Set baikal options clock:recover temp:cutoff temp
--baikal-fan Set baikal fan speed(percent)
--enable-nicehashsma Use extra wide display without toggling
Options for command line only:
--config|-c Load a JSON-format configuration file
See example.conf for an example configuration.
--default-config Specify the filename of the default config file
Loaded at start and used when saving without a name.
--remote-config-retry Number of times to retry downloading remote config file. Default: 3 (default: 3)
--remote-config-wait Time in seconds to wait between download retries of remote config files. Default: 10secs (default: 10)
--remote-config-usecache Use cached copy of the remote config file when download fails. Default: No
--help|-h Print this message
--ndevs|-n Display all USB devices and exit
--version|-V Display version and exit
Usage: /opt/scripta/bin/sgminer [-kDdElLLmpPQqUsTouvOchnV]
Options for both config file and command line:
--algorithm|--kernel|-k
--api-allow
--api-description
--api-groups
--api-listen Enable API, default: disabled
--api-mcast Enable API Multicast listener, default: disabled
--api-mcast-addr
--api-mcast-code
--api-mcast-des
--api-mcast-port
--api-network Allow API (if enabled) to listen on/for any address, default: only 127.0.0.1
--api-port
--balance Change multipool strategy from failover to even share balance
--blake-compact Set SPH_COMPACT_BLAKE64 for Xn derived algorithms (Can give better hashrate for some GPUs)
--compact Use compact display without per device statistics
--debug|-D Enable debug output
--debug-log Enable debug logging when stderr is redirected to file
--default-profile
--description
--device|-d
--disable-rejecting Automatically disable pools that continually reject shares
--expiry|-E
--event-on
--event-runcmd
--event-reboot
--event-reboot-delay
--event-quit
--event-quit-message
--failover-only Don't leak work to backup pools when primary pool is lagging
--failover-switch-delay
--fix-protocol Do not redirect to a different getwork protocol (eg. stratum)
--incognito Do not display user name in status window
--hotplug
--more-notices Shows work restart and new block notices, hidden by default
--load-balance Change multipool strategy from failover to quota based balance
--log|-l
--log-file|-L
--log-show-date|-L Show date on every log line
--lowmem Minimise caching of shares for low memory applications
--monitor|-m
--name|--pool-name
--net-delay Impose small delays in networking to not overload slow routers
--nfactor
--no-client-reconnect Disable 'client.reconnect' stratum functionality
--no-restart Do not attempt to restart GPUs that hang
--no-submit-stale Don't submit shares if they are detected as stale
--no-extranonce|--pool-no-extranonce Disable 'extranonce' stratum subscribe for pool
--pass|--pool-pass|-p
--per-device-stats Force verbose mode and output per-device statistics
--pool-algorithm|--pool-kernel|--pool-algo
--pool-backup Mark this pool as a backup for simple connect strategy
--extranonce|--pool-extranonce
--priority|--pool-priority
--profile-algorithm|--profile-kernel
--protocol-dump|-P Verbose dump of protocol-level activities
--queue|-Q
--quiet|-q Disable logging output, display status and errors
--quota|--pool-quota|-U
--real-quiet Disable all output
--remove-disabled Remove disabled devices entirely, as if they didn't exist
--rotate
--round-robin Change multipool strategy from failover to round robin on failure
--scan-time|-s
--sched-start
--sched-stop
--sharelog
--shares
--socks-proxy
--show-coindiff Show coin difficulty rather than hash value of a share
--state|--pool-state
--keepalive|--pool-keepalive
--switcher-mode
--syslog Use system log for output messages (default: standard error)
--tcp-keepalive
--text-only|-T Disable ncurses formatted screen output
--url|--pool-url|-o
--usb
--user|--pool-user|-u
--verbose|-v Log verbose output to stderr as well as status output
--vote
--watchpool-refresh
--userpass|--pool-userpass|-O
--worktime Display extra work time debug information
--difficulty-multiplier
--baikal-options
--baikal-fan
--enable-nicehashsma Use extra wide display without toggling
Options for command line only:
--config|-c
See example.conf for an example configuration.
--default-config
Loaded at start and used when saving without a name.
--remote-config-retry
--remote-config-wait
--remote-config-usecache Use cached copy of the remote config file when download fails. Default: No
--help|-h Print this message
--ndevs|-n Display all USB devices and exit
--version|-V Display version and exit
January 23, 2018, 08:24:48 AM
percy_tc has an x10 and is going to allow me to test on his. Once I get confirmation of success I'll let you guys know.
January 23, 2018, 07:15:39 AM
After you guys have found it, could you also have a look at the giant B?
January 23, 2018, 06:41:25 AM
I figured out how to change the clock rate... Anyone care to give me access to their miner to test?
And, looking at the code, I think it'll be possible to get these things to multi-mine too.
Can you share what you found (or give a hint)? I can poke around myself on a live system and report back. And, looking at the code, I think it'll be possible to get these things to multi-mine too.
It would not be possible to give you access to my system, sorry. However, I do think we can work together to solve this.
January 23, 2018, 01:45:05 AM
I figured out how to change the clock rate... Anyone care to give me access to their miner to test?
And, looking at the code, I think it'll be possible to get these things to multi-mine too.
And, looking at the code, I think it'll be possible to get these things to multi-mine too.
watching you senseless
January 23, 2018, 01:03:37 AM
I figured out how to change the clock rate... Anyone care to give me access to their miner to test?
And, looking at the code, I think it'll be possible to get these things to multi-mine too.
And, looking at the code, I think it'll be possible to get these things to multi-mine too.
January 22, 2018, 08:37:56 PM
I just downloaded the X10 firmware for another project. I'll take a look and see what I can find out. If someone would like to give me access to one so I can snoop around a live system I'd appreciate it. I can teamviewer into a PC and then ssh to the miner from there.
Probably not possible..
0.2 BTC from me as well, but for someone who could modify the A3 firmware to mine Blake2s instead of Blake2b, To mine Verge.
Probably not possible..
January 22, 2018, 07:32:28 PM
0.2 BTC from me as well, but for someone who could modify the A3 firmware to mine Blake2s instead of Blake2b, To mine Verge.
January 22, 2018, 06:07:00 PM
watching
January 22, 2018, 05:44:25 PM
NOW !!! Pay 0.2 BTC for working tutorial how to OVERCLOCK Baikal x10
from 300MHz to 400 Mhz [/size]
from 300MHz to 400 Mhz [/size]
January 22, 2018, 05:29:20 PM
Guys please help how to ⚡OVERCLOCK⚡
how to ⚡OVERCLOCK⚡ 
January 20, 2018, 10:27:50 AM
Baikals pictures show them running at 400 somthing, so I think it’s no harm..unless you mine with x11 maybe.
Would like to try it, but 0.1 btc is too steep when I haven’t got many miners..
Would like to try it, but 0.1 btc is too steep when I haven’t got many miners..
January 20, 2018, 08:47:14 AM
Hi guys ,
Pay 0.1 BTC for working tutorial how to OVERCLOCK Baikal x10
from 300MHz to 400 Mhz
How to claim 0.1 ? Must show me video on PM
ESCROW
Pay 0.1 BTC for working tutorial how to OVERCLOCK Baikal x10
from 300MHz to 400 Mhz
How to claim 0.1 ? Must show me video on PM
ESCROW
January 20, 2018, 06:25:05 AM
Hi guys ,
Pay 0.2 BTC for working tutorial how to OVERCLOCK Baikal x10
from 300MHz to 400 Mhz
How to claim 0.2 ? Must show me video on PM
ESCROW
Pay 0.2 BTC for working tutorial how to OVERCLOCK Baikal x10
from 300MHz to 400 Mhz
How to claim 0.2 ? Must show me video on PM
ESCROW
Jump to: