Topic: BANKSYCOIN (SOON TO BE ARTSYCOIN) - ORIGINAL OFFICIAL THREAD - page 41. (Read 75801 times)
Hey banksycoin, any plans to reduce the total number of coins? If you reduced it to a lot less so that there was a definate PoW period, I suspect a lot of the big pools would jump onboard. Scrypt is coming back, no matter the people that moan on here about it. You still have many scrypt miners
UPDATE: BSY/BTC market now open on coins-e.com https://www.coins-e.com/exchange/BSY_BTC/ and we are now listed for voting on usecryptos so start trading and get your votes in guys https://www.usecryptos.com/voting 
Just seen my 50,000 karma coins hit my wallet. Cheers guys :-)
Seems your karma works great for you :-)Today a good karma will come to many of us :-)
Remember to back up your wallets and keep your coins safe!
Just seen my 50,000 karma coins hit my wallet. Cheers guys :-)
Mine too, many thanks
Just seen my 50,000 karma coins hit my wallet. Cheers guys :-)
UPDATE: Hello people
We have brought the date forward for the "good karma" giveaway. All claims will now be distributed on Thursday the 24th of July! (TOMORROW) We will start the giveaway at 10 am (UK time).
We will be announcing a new and exciting project tomorrow evening
We have brought the date forward for the "good karma" giveaway. All claims will now be distributed on Thursday the 24th of July! (TOMORROW) We will start the giveaway at 10 am (UK time).
We will be announcing a new and exciting project tomorrow evening
Thanks for that, fingers crossed that I got the "Good Karma"
nice move, looking forward to the top up and more stakes
UPDATE: Hello people
We have brought the date forward for the "good karma" giveaway. All claims will now be distributed on Thursday the 24th of July! (TOMORROW) We will start the giveaway at 10 am (UK time).
We will be announcing a new and exciting project tomorrow evening
We have brought the date forward for the "good karma" giveaway. All claims will now be distributed on Thursday the 24th of July! (TOMORROW) We will start the giveaway at 10 am (UK time).
We will be announcing a new and exciting project tomorrow evening
Thanks for that, fingers crossed that I got the "Good Karma"
UPDATE: Hello people
We have brought the date forward for the "good karma" giveaway. All claims will now be distributed on Thursday the 24th of July! (TOMORROW) We will start the giveaway at 10 am (UK time).
We will be announcing a new and exciting project tomorrow evening
We have brought the date forward for the "good karma" giveaway. All claims will now be distributed on Thursday the 24th of July! (TOMORROW) We will start the giveaway at 10 am (UK time).
We will be announcing a new and exciting project tomorrow evening
i hold banksy i add the wallet to my pos-coin server 
very nice for solo mining my last block i get 17.01 BSY whats the 0.01 ?
Sometimes blocks will give you a little bit extra.very nice for solo mining my last block i get 17.01 BSY whats the 0.01 ?
When you send coins, then you have to pay a fee, so because they gave you that little bit extra in that block, then, when you send a transaction, then the fee is already covered in that block you mined. Not all blocks have that, so just think of it as a freebie
I have not come across any coin that I have mined, where they do not do this with some blocks.
i hold banksy i add the wallet to my pos-coin server
very nice for solo mining my last block i get 17.01 BSY whats the 0.01 ?
very nice for solo mining my last block i get 17.01 BSY whats the 0.01 ?
I disabled the pool for now. So many blocks Hope diff retarget and block times change in the near future. I like banksycoin and the giveaways But for now it should be easy to solomine.
Hope diff retarget and block times change in the near future. I like banksycoin and the giveaways But for now it should be easy to solomine.would be nice if someone did a solo mine guide so everyone can do this, I've never solo mined a coin cause the diff was always too high ....
I know this will not sound too useful, but what I did, was go to the mining section here and read up on things,
Most of the guides are based on one coin, but it is fairly easy to take those same settings and apply that to other scrypt coins too.
Here for example
https://bitcointalksearch.org/topic/a-how-to-guide-for-solo-mining-521563
This link below will help give you an idea what your graphics card might be capable of.
https://litecoin.info/Mining_hardware_comparison
I have plenty of good hardware, 4x 270x saphs and a 8 core CPU ... but that guide teaches me very little and it's written by someone who clearly has been guilty of ripping people off.... (check the trust on the OP ... -4
) My questions would be:
What are RPC details ?
where do I get RPC details ?
The Ip Address is the local to my machine or outbound to another?
Do I need to make allowances in my router for this connection ?
Do I need to make allowances in my firewall for this connection ?
Do I need to take special steps in security to protect the machine in question ?
.....And I am sure I can come up with a bunch more questions once I start trying to set it up, that if we want the public to start using crypto currency regularly we should cover ... being the dunce here I am pretty sure I can pose the right ones so average joe can setup and start mining ... coins are not just for the 1337
You should ask those sorts of questions here, as you would get more help there.
https://bitcointalk.org/index.php?board=160.0
Wouldn't worry so much about the OP having -4 trust, you were just reading some tips and the reason he got -4 was because his account had got hacked some point after and whoever hacked it, posted some dodgy links.
But having 4 x 270s will give you a nice hashrate, and you might have two in each PC or 4 in one PC, or 1 in each PC, I do not know, but if you do, then these need to be set up a certain way when using Cgminer etc, so the mining forum is best to answer those questions. Different card models need different settings to get them performing optimally.
I solo mine sometimes, not so much now with a single R9-280x, gives me around 720 KH/s and I use Cgminer v 3.72.
Ok after a long talk with a good friend this is where we are at getting solo mining set up ... I ask here because it's the coin I am trying to solo mine and I cannot be the only person here solo mining .... here is what we are working with and it's failing out for some reason we cannot fathom ... Ol'mate is a old hand at mining ... so a little advice can go a long way to helping us here
My CG bat file is as follows
c:\cg\cgminer.exe --scrypt -o http://10.1.1.2:9999 -u loginname -p loginpass
My Banksy Conf file is as follows
rpcuser=loginname
rpcpassword=loginpass
rpcallowip=10.1.1.2
rpcport=9999
daemon=1
server=1
listen=1
where have we gone wrong ?
Latest 1.3 wallet?
yes james I have the 1.3v
error returned is
[2014-07-22 21:36:23] Started cgminer 3.7.0
[2014-07-22 21:36:23] Started cgminer 3.7.0
[2014-07-22 21:36:24] Probing for an alive pool
[2014-07-22 21:36:28] Pool 0 slow/down or URL or credentials invalid
but as you can see from the above the details are correct .... everything has been copy and pasted here
make sure the conf file is called Banksycoin.conf
Here are some of my lines.
rpcconnect=127.0.0.1
rpcport=36274
server=1
daemon=1
listen=1
addnode=66.85.133.206:36274
addnode=82.139.116.38:36274
and my bat file
cgminer.exe --scrypt -u ******* -p ******* -o http://127.0.0.1:36274 --gpu-platform 0 -d 0 -w 256 -v 1 -I 13 -g 2 -l 1 --shaders 2048 --thread-concurrency 8912
That bat file setup is for a R9 280x so a R9 270 will differ...there should be lots of examples in the forum of what people have set up.
Wow!
Have you seen what happend @ https://coinedup.com/OrderBook
Someone bought mine 10k BSY coins for 0.00002098BTC per 1 BSY...
I was trying to move the market UP but perhaps that price was WAY to low!!!
Have you seen what happend @ https://coinedup.com/OrderBook
Someone bought mine 10k BSY coins for 0.00002098BTC per 1 BSY...
I was trying to move the market UP
but perhaps that price was WAY to low!!!
Ok after a long talk with a good friend this is where we are at getting solo mining set up ... I ask here because it's the coin I am trying to solo mine and I cannot be the only person here solo mining .... here is what we are working with and it's failing out for some reason we cannot fathom ... Ol'mate is a old hand at mining ... so a little advice can go a long way to helping us here
My CG bat file is as follows
c:\cg\cgminer.exe --scrypt -o http://10.1.1.2:9999 -u loginname -p loginpass
My Banksy Conf file is as follows
rpcuser=loginname
rpcpassword=loginpass
rpcallowip=10.1.1.2
rpcport=9999
daemon=1
server=1
listen=1
where have we gone wrong ?
Latest 1.3 wallet?
yes james I have the 1.3v
error returned is
[2014-07-22 21:36:23] Started cgminer 3.7.0
[2014-07-22 21:36:23] Started cgminer 3.7.0
[2014-07-22 21:36:24] Probing for an alive pool
[2014-07-22 21:36:28] Pool 0 slow/down or URL or credentials invalid
but as you can see from the above the details are correct .... everything has been copy and pasted here
rpcuser=loginname
rpcpassword=loginpass
rpcallowip=10.1.1.2
rpcport=9999
daemon=1
server=1
listen=1
Why are you using 10.1.1.2 as the IP? Are you mining through a different machine than the wallet is on? If not - then use 127.0.0.1
If that still doesn't work, I would try a higher rpcport - it's possible that your machine won't allow the one your using for some reason. I always use 14212 unless it's specified which one to use in the OP. Also, depending on your setup, you may have to make an exception for the port in your firewall.
Good luck!
because that is the IP address of this machine connection between the modem and the PC ... the IPv4 address
I am mining to the wallet on the same machine ..
I just tried a different bunch of ports ... and your suggestion of a diff IP
Ok after a long talk with a good friend this is where we are at getting solo mining set up ... I ask here because it's the coin I am trying to solo mine and I cannot be the only person here solo mining .... here is what we are working with and it's failing out for some reason we cannot fathom ... Ol'mate is a old hand at mining ... so a little advice can go a long way to helping us here
My CG bat file is as follows
c:\cg\cgminer.exe --scrypt -o http://10.1.1.2:9999 -u loginname -p loginpass
My Banksy Conf file is as follows
rpcuser=loginname
rpcpassword=loginpass
rpcallowip=10.1.1.2
rpcport=9999
daemon=1
server=1
listen=1
where have we gone wrong ?
Latest 1.3 wallet?
yes james I have the 1.3v
error returned is
[2014-07-22 21:36:23] Started cgminer 3.7.0
[2014-07-22 21:36:23] Started cgminer 3.7.0
[2014-07-22 21:36:24] Probing for an alive pool
[2014-07-22 21:36:28] Pool 0 slow/down or URL or credentials invalid
but as you can see from the above the details are correct .... everything has been copy and pasted here
rpcuser=loginname
rpcpassword=loginpass
rpcallowip=10.1.1.2
rpcport=9999
daemon=1
server=1
listen=1
Why are you using 10.1.1.2 as the IP? Are you mining through a different machine than the wallet is on? If not - then use 127.0.0.1
If that still doesn't work, I would try a higher rpcport - it's possible that your machine won't allow the one your using for some reason. I always use 14212 unless it's specified which one to use in the OP. Also, depending on your setup, you may have to make an exception for the port in your firewall.
Good luck!
because that is the IP address of this machine connection between the modem and the PC ... the IPv4 address
I am mining to the wallet on the same machine ..
I just tried a different bunch of ports ... and your suggestion of a diff IP
Ok after a long talk with a good friend this is where we are at getting solo mining set up ... I ask here because it's the coin I am trying to solo mine and I cannot be the only person here solo mining .... here is what we are working with and it's failing out for some reason we cannot fathom ... Ol'mate is a old hand at mining ... so a little advice can go a long way to helping us here
My CG bat file is as follows
c:\cg\cgminer.exe --scrypt -o http://10.1.1.2:9999 -u loginname -p loginpass
My Banksy Conf file is as follows
rpcuser=loginname
rpcpassword=loginpass
rpcallowip=10.1.1.2
rpcport=9999
daemon=1
server=1
listen=1
where have we gone wrong ?
Latest 1.3 wallet?
yes james I have the 1.3v
error returned is
[2014-07-22 21:36:23] Started cgminer 3.7.0
[2014-07-22 21:36:23] Started cgminer 3.7.0
[2014-07-22 21:36:24] Probing for an alive pool
[2014-07-22 21:36:28] Pool 0 slow/down or URL or credentials invalid
but as you can see from the above the details are correct .... everything has been copy and pasted here
rpcuser=loginname
rpcpassword=loginpass
rpcallowip=10.1.1.2
rpcport=9999
daemon=1
server=1
listen=1
Why are you using 10.1.1.2 as the IP? Are you mining through a different machine than the wallet is on? If not - then use 127.0.0.1
If that still doesn't work, I would try a higher rpcport - it's possible that your machine won't allow the one your using for some reason. I always use 14212 unless it's specified which one to use in the OP. Also, depending on your setup, you may have to make an exception for the port in your firewall.
Good luck!
I disabled the pool for now. So many blocks Hope diff retarget and block times change in the near future. I like banksycoin and the giveaways But for now it should be easy to solomine.
Hope diff retarget and block times change in the near future. I like banksycoin and the giveaways But for now it should be easy to solomine.would be nice if someone did a solo mine guide so everyone can do this, I've never solo mined a coin cause the diff was always too high ....
I know this will not sound too useful, but what I did, was go to the mining section here and read up on things,
Most of the guides are based on one coin, but it is fairly easy to take those same settings and apply that to other scrypt coins too.
Here for example
https://bitcointalksearch.org/topic/a-how-to-guide-for-solo-mining-521563
This link below will help give you an idea what your graphics card might be capable of.
https://litecoin.info/Mining_hardware_comparison
I have plenty of good hardware, 4x 270x saphs and a 8 core CPU ... but that guide teaches me very little and it's written by someone who clearly has been guilty of ripping people off.... (check the trust on the OP ... -4
) My questions would be:
What are RPC details ?
where do I get RPC details ?
The Ip Address is the local to my machine or outbound to another?
Do I need to make allowances in my router for this connection ?
Do I need to make allowances in my firewall for this connection ?
Do I need to take special steps in security to protect the machine in question ?
.....And I am sure I can come up with a bunch more questions once I start trying to set it up, that if we want the public to start using crypto currency regularly we should cover ... being the dunce here I am pretty sure I can pose the right ones so average joe can setup and start mining ... coins are not just for the 1337
You should ask those sorts of questions here, as you would get more help there.
https://bitcointalk.org/index.php?board=160.0
Wouldn't worry so much about the OP having -4 trust, you were just reading some tips and the reason he got -4 was because his account had got hacked some point after and whoever hacked it, posted some dodgy links.
But having 4 x 270s will give you a nice hashrate, and you might have two in each PC or 4 in one PC, or 1 in each PC, I do not know, but if you do, then these need to be set up a certain way when using Cgminer etc, so the mining forum is best to answer those questions. Different card models need different settings to get them performing optimally.
I solo mine sometimes, not so much now with a single R9-280x, gives me around 720 KH/s and I use Cgminer v 3.72.
Ok after a long talk with a good friend this is where we are at getting solo mining set up ... I ask here because it's the coin I am trying to solo mine and I cannot be the only person here solo mining .... here is what we are working with and it's failing out for some reason we cannot fathom ... Ol'mate is a old hand at mining ... so a little advice can go a long way to helping us here
My CG bat file is as follows
c:\cg\cgminer.exe --scrypt -o http://10.1.1.2:9999 -u loginname -p loginpass
My Banksy Conf file is as follows
rpcuser=loginname
rpcpassword=loginpass
rpcallowip=10.1.1.2
rpcport=9999
daemon=1
server=1
listen=1
where have we gone wrong ?
Latest 1.3 wallet?
yes james I have the 1.3v
error returned is
[2014-07-22 21:36:23] Started cgminer 3.7.0
[2014-07-22 21:36:23] Started cgminer 3.7.0
[2014-07-22 21:36:24] Probing for an alive pool
[2014-07-22 21:36:28] Pool 0 slow/down or URL or credentials invalid
but as you can see from the above the details are correct .... everything has been copy and pasted here
Latest 1.3 wallet?
I disabled the pool for now. So many blocks Hope diff retarget and block times change in the near future. I like banksycoin and the giveaways But for now it should be easy to solomine.
Hope diff retarget and block times change in the near future. I like banksycoin and the giveaways But for now it should be easy to solomine.would be nice if someone did a solo mine guide so everyone can do this, I've never solo mined a coin cause the diff was always too high ....
I know this will not sound too useful, but what I did, was go to the mining section here and read up on things,
Most of the guides are based on one coin, but it is fairly easy to take those same settings and apply that to other scrypt coins too.
Here for example
https://bitcointalksearch.org/topic/a-how-to-guide-for-solo-mining-521563
This link below will help give you an idea what your graphics card might be capable of.
https://litecoin.info/Mining_hardware_comparison
I have plenty of good hardware, 4x 270x saphs and a 8 core CPU ... but that guide teaches me very little and it's written by someone who clearly has been guilty of ripping people off.... (check the trust on the OP ... -4
) My questions would be:
What are RPC details ?
where do I get RPC details ?
The Ip Address is the local to my machine or outbound to another?
Do I need to make allowances in my router for this connection ?
Do I need to make allowances in my firewall for this connection ?
Do I need to take special steps in security to protect the machine in question ?
.....And I am sure I can come up with a bunch more questions once I start trying to set it up, that if we want the public to start using crypto currency regularly we should cover ... being the dunce here I am pretty sure I can pose the right ones so average joe can setup and start mining ... coins are not just for the 1337
You should ask those sorts of questions here, as you would get more help there.
https://bitcointalk.org/index.php?board=160.0
Wouldn't worry so much about the OP having -4 trust, you were just reading some tips and the reason he got -4 was because his account had got hacked some point after and whoever hacked it, posted some dodgy links.
But having 4 x 270s will give you a nice hashrate, and you might have two in each PC or 4 in one PC, or 1 in each PC, I do not know, but if you do, then these need to be set up a certain way when using Cgminer etc, so the mining forum is best to answer those questions. Different card models need different settings to get them performing optimally.
I solo mine sometimes, not so much now with a single R9-280x, gives me around 720 KH/s and I use Cgminer v 3.72.
Ok after a long talk with a good friend this is where we are at getting solo mining set up ... I ask here because it's the coin I am trying to solo mine and I cannot be the only person here solo mining .... here is what we are working with and it's failing out for some reason we cannot fathom ... Ol'mate is a old hand at mining ... so a little advice can go a long way to helping us here
My CG bat file is as follows
c:\cg\cgminer.exe --scrypt -o http://10.1.1.2:9999 -u loginname -p loginpass
My Banksy Conf file is as follows
rpcuser=loginname
rpcpassword=loginpass
rpcallow=10.1.1.2
rpcport=9999
daemon=1
server=1
listen=1
where have we gone wrong ?
Hi guys,
sorry for the late reply. Just so you all know we will be making some adjustments with the block/mining issues highlighted by the community. My partner who deals with this area of the code is currently in hospital having a (minor) operation, so unfortunately this delays us slightly. We hope to have everything finished in a few days. Please stay tuned for updates. Really sorry for any inconvenience.
sorry for the late reply. Just so you all know we will be making some adjustments with the block/mining issues highlighted by the community. My partner who deals with this area of the code is currently in hospital having a (minor) operation, so unfortunately this delays us slightly. We hope to have everything finished in a few days. Please stay tuned for updates. Really sorry for any inconvenience.
I disabled the pool for now. So many blocks Hope diff retarget and block times change in the near future. I like banksycoin and the giveaways But for now it should be easy to solomine.
Hope diff retarget and block times change in the near future. I like banksycoin and the giveaways But for now it should be easy to solomine.would be nice if someone did a solo mine guide so everyone can do this, I've never solo mined a coin cause the diff was always too high ....
I know this will not sound too useful, but what I did, was go to the mining section here and read up on things,
Most of the guides are based on one coin, but it is fairly easy to take those same settings and apply that to other scrypt coins too.
Here for example
https://bitcointalksearch.org/topic/a-how-to-guide-for-solo-mining-521563
This link below will help give you an idea what your graphics card might be capable of.
https://litecoin.info/Mining_hardware_comparison
I have plenty of good hardware, 4x 270x saphs and a 8 core CPU ... but that guide teaches me very little and it's written by someone who clearly has been guilty of ripping people off.... (check the trust on the OP ... -4
) My questions would be:
What are RPC details ?
where do I get RPC details ?
The Ip Address is the local to my machine or outbound to another?
Do I need to make allowances in my router for this connection ?
Do I need to make allowances in my firewall for this connection ?
Do I need to take special steps in security to protect the machine in question ?
.....And I am sure I can come up with a bunch more questions once I start trying to set it up, that if we want the public to start using crypto currency regularly we should cover ... being the dunce here I am pretty sure I can pose the right ones so average joe can setup and start mining ... coins are not just for the 1337
You should ask those sorts of questions here, as you would get more help there.
https://bitcointalk.org/index.php?board=160.0
Wouldn't worry so much about the OP having -4 trust, you were just reading some tips and the reason he got -4 was because his account had got hacked some point after and whoever hacked it, posted some dodgy links.
But having 4 x 270s will give you a nice hashrate, and you might have two in each PC or 4 in one PC, or 1 in each PC, I do not know, but if you do, then these need to be set up a certain way when using Cgminer etc, so the mining forum is best to answer those questions. Different card models need different settings to get them performing optimally.
I solo mine sometimes, not so much now with a single R9-280x, gives me around 720 KH/s and I use Cgminer v 3.72.
Jump to: