Pages:
Author

Topic: [Batch 4 Pre-Order!] FutureBit Moonlander 2 Official Order Thread - page 9. (Read 62915 times)

legendary
Activity: 2182
Merit: 1401
I just pre-ordered several of these from both NA vendors and managed to get my hands on some Batch 1's as well.

Assuming you have proper hubs that provide sufficient power, anyone know how many you can connect to 1 Windows 10 System?

Same question, how many to a RPI?

Thanks.

I test about 20-30 at a time using eyeboot's huge hub as my test setup. Both Windows and Pi handle them all fine.
hero member
Activity: 952
Merit: 508
I just pre-ordered several of these from both NA vendors and managed to get my hands on some Batch 1's as well.

Assuming you have proper hubs that provide sufficient power, anyone know how many you can connect to 1 Windows 10 System?

Same question, how many to a RPI?

Thanks.
legendary
Activity: 1894
Merit: 1087


I would like to order 10 to Australia

I tried to order batch one when you opened the orders for that batch
but after 3 or 4 messages, which you replied to, I never got a payment
address, so I gave up

Are you still handling Oceania yourself?

how do I order

bittawmart.com is AUS/NZ
jr. member
Activity: 57
Merit: 10


I would like to order 10 to Australia

I tried to order batch one when you opened the orders for that batch
but after 3 or 4 messages, which you replied to, I never got a payment
address, so I gave up

Are you still handling Oceania yourself?

how do I order
legendary
Activity: 1894
Merit: 1087
Quick update for you guys.

Batch 1 Stock has been sold out everywhere (including the in stock units distributors received separate from the pre-orders). Batch 2 Pre-orders are near sold out and will probably be officially closing it out this weekend.

Its also been brought to my attention that some of you are trying to get refunds from pre-orders due to LTC's recent price rise. Please keep in mind that all pre-orders are final. I don't do pre-orders because I want to collect all your LTC and profit. All my distributors, and especially myself operate on very slim margins, I don't have enough cash on hand to finance additional batches that require large sums of upfront cash for parts and ASIC purchases, hence the pre-order. 

All pre-order crypto funds are cashed out DAILY by my distributors to fund this endeavor, so there are absolutely no refunds, and are not even possible even if i wanted too since the bulk of those funds are in supply chain's banks already. Im sure most of you guys that sold your LTC in the 100's are not going to exchanges and asking for a refund, just like you wouldn't expect us to start asking more money for your pre-order if LTC price goes down  Tongue

PLEASE do not place a pre-order if your not comfortable with this, and wait until batch 2 in stock units to arrive (which will cost significantly more than pre-order units).

On the flip side a BIG THANKS to everyone that placed a Batch 2 pre-order and will allow an additional wave of moonlanders to spread around the world and decentralize LTC's blockchain!

well said, thank you for making this all possible jstefanop
newbie
Activity: 16
Merit: 0
Received mine today from Eyeboot. It's been a few hours and both are working okay on Win 10 at 756 Mhz.
sr. member
Activity: 307
Merit: 250
Just received my package from AsicPuppy.
Great hardware, love it.

Work out of the box. Install driver, BFGminer and voila !
Run between 3-3.5MH/s at stock settings with nice blinking leds.

Tested with Win 7









legendary
Activity: 2182
Merit: 1401
Quick update for you guys.

Batch 1 Stock has been sold out everywhere (including the in stock units distributors received separate from the pre-orders). Batch 2 Pre-orders are near sold out and will probably be officially closing it out this weekend.

Its also been brought to my attention that some of you are trying to get refunds from pre-orders due to LTC's recent price rise. Please keep in mind that all pre-orders are final. I don't do pre-orders because I want to collect all your LTC and profit. All my distributors, and especially myself operate on very slim margins, I don't have enough cash on hand to finance additional batches that require large sums of upfront cash for parts and ASIC purchases, hence the pre-order. 

All pre-order crypto funds are cashed out DAILY by my distributors to fund this endeavor, so there are absolutely no refunds, and are not even possible even if i wanted too since the bulk of those funds are in supply chain's banks already. Im sure most of you guys that sold your LTC in the 100's are not going to exchanges and asking for a refund, just like you wouldn't expect us to start asking more money for your pre-order if LTC price goes down  Tongue

PLEASE do not place a pre-order if your not comfortable with this, and wait until batch 2 in stock units to arrive (which will cost significantly more than pre-order units).

On the flip side a BIG THANKS to everyone that placed a Batch 2 pre-order and will allow an additional wave of moonlanders to spread around the world and decentralize LTC's blockchain!
legendary
Activity: 1894
Merit: 1087
pre-orders will close within the next week, so if you still want to pick one up at pre-order price I would order soon.

Order soon guys Wink
legendary
Activity: 2182
Merit: 1401
pre-orders will close within the next week, so if you still want to pick one up at pre-order price I would order soon.
member
Activity: 69
Merit: 10
Just another Canadian Cryptocurrency enthusiast!
Mine will be here at the end of January!
I originally had one, but I have secured the orders for 3 more! 4 miners, incoming!
I honestly can't wait. Great work, developers! Keep it up!
member
Activity: 161
Merit: 12
Used the bittawm web site.  4 ordered.  Nice.  Easy.  Done. 
legendary
Activity: 1894
Merit: 1087
Same here - ordered from bitshopper.de

i'm glad their aren't a lot of people trying to buy these in bulk and resell them for a profit - i think the guys have put in a tremendous amount of work to get this launched and open up mining, for a low price, to the masses.

Yep, my distributors and I have lots of checks in place and have put alot of effort to keep these as affordable as possible and put in the hands of as many new people getting into mining as possible!

God bless jstefanop for bringing this together.

Appreciate it mate!
sr. member
Activity: 307
Merit: 250
Community appreciate all your efforts to build something cool and useful for the mass.
Got my tracking number today from AsicPuppy, lost order but no worries, all good now.  Cool
legendary
Activity: 2182
Merit: 1401
Same here - ordered from bitshopper.de

i'm glad their aren't a lot of people trying to buy these in bulk and resell them for a profit - i think the guys have put in a tremendous amount of work to get this launched and open up mining, for a low price, to the masses.

Yep, my distributors and I have lots of checks in place and have put alot of effort to keep these as affordable as possible and put in the hands of as many new people getting into mining as possible!
full member
Activity: 492
Merit: 103
Wow, I came here from the charlie's twitter. Is it possible to deliver to Russia? A party of more than one piece will not cause problems on the border?
member
Activity: 83
Merit: 10
Am i a millionaire yet?
Same here - ordered from bitshopper.de

i'm glad their aren't a lot of people trying to buy these in bulk and resell them for a profit - i think the guys have put in a tremendous amount of work to get this launched and open up mining, for a low price, to the masses.
newbie
Activity: 24
Merit: 0
received my first moonlander today, from the first Bitshopper pre-order.
What a tiny cute little machine!! i dont even care if it doesnt make money , to have one is amazing.
legendary
Activity: 2506
Merit: 1714
Electrical engineer. Mining since 2014.
I managed to order one from CrazyGuy (ASICPuppy.net store).  Smiley

He said he has in stock Moonlander 2 miners at the moment.

I'm excited to see and test it then when it arrives!
member
Activity: 69
Merit: 10
Just another Canadian Cryptocurrency enthusiast!
Proud to say I just ordered 2 units to test out! Seems to be an amazing miner for its size!
Can't wait for January now!
Pages:
Jump to: