Best Dogecoin pool - page 3. | Bitcointalksearch.org

TenaciousC

hero member

Activity: 608

Merit: 500

Quote from: zneww on January 29, 2014, 05:27:39 PM

Code:

dogesled.com:22550 or 80

P2Pool mining if you are consistent and want to make real doge and not have admins steal your coins and or get ddos'd! Join up

We're waiting.

+1 P2P FTW!

Just pick a low latency pool from the link here under and you are set

http://p2pool.jir.dk/dogecoin/

Masterpulha

newbie

Activity: 3

Merit: 0

Hi, this is my 1st post .. i tried many pools, got massive rip at Megamultipool .. stay away from them!!

Finaly got my miners stable, working rock solid
I have newbie setup, using my old 5850 toxic and my current one gigabite 7870 oc

this what i got so far:

http://i.imgur.com/EYqLK4n.png

Now im using https://dogehouse.org so far all good

AtlantisPlatform

member

Activity: 98

Merit: 10

Quote from: smariner on February 01, 2014, 11:15:01 AM

I need a sanity check, I'm using megamultipool.com as a pool. I've got a R9 290 and it running at 765.0Kh/s however after 12 hours I've received:

DOGE estimates
Block: 6.89760376
Fees: 0.06937178
Payout: 6.86780657

SO, is the payout in this case ONLY 6.867 Dogecoins?

Which is ONLY 0.001460 USD * 6.867 = 0.01 USD over 12 hours

This seems EXTREMELY LOW compared to the the average USD that is on http://www.coinwarz.com/ for Dogecoins.

Any thoughts or is my math off?

Thank you in advance!

That is because pool operators skim and steal a percent of your coins off the top. Doge is the only coin where you only get 50-60% of coinwarz estimates. Most all doge pool operators are scamming people, but the people are to dumb to realize it.

vertoe

hero member

Activity: 518

Merit: 505

Free DOGE!

Dogecoin fun: http://q30.qhor.net:9555/

smariner

newbie

Activity: 7

Merit: 0

THANK YOU SO MUCH for pointing this out... Here I was thinking that it just wasn't worth it to mine, getting like USD 0.01 PER DAY for the last 3 days. Glad you pointed me in the right direction. My rig is now humming along and looking forward to tweaking it further!

Thanks!

QNX

newbie

Activity: 58

Merit: 0

check the video card frequency settings and other cgminer options, all you work is hardware errors, youre mining nothing, and this is not a pools fault

(5s):700.2K (avg):756.0Kh/s | A:48 R:32 HW:17310 WU:2.7/m

you should have no HW at all, so tweak tweak tweak

smariner

newbie

Activity: 7

Merit: 0

cgminer version 3.7.2 - Started: [2014-02-01 16:57:41]
--------------------------------------------------------------------------------
(5s):700.2K (avg):756.0Kh/s | A:48 R:32 HW:17310 WU:2.7/m
ST: 2 SS: 0 NB: 25 LW: 167 GF: 0 RF: 0
Connected to pool.dogepool.net diff 16 with stratum as user XXXXXXXXXXX
Block: 5b7122be... Diff:1.26K Started: [17:22:01] Best share: 463
--------------------------------------------------------------------------------
[P]ool management [G]PU management ettings [D]isplay options [Q]uit
GPU 0: 77.0C 2637RPM | 755.5K/758.1Kh/s | A:48 R:32 HW:17355 WU:2.7/m I:20

As you can see the WU is really low, only 2.7/m vs close to 700.0/m is what it should be around, correct? Huh

??

I just dropped it to I:17 and it's going up(20.3/m) but still nowhere near the 700.0/m it should be. Suggestions???

Thanks again!

QNX

newbie

Activity: 58

Merit: 0

show the miner screenshot after 10 minutes of running

smariner

newbie

Activity: 7

Merit: 0

Alright, I set it to -I 19 -g 1 -w 512 and I'm getting: 755.2 Kh/s and the WU is 5.3/m. Is this low/high or about right for this setting?

So far after 3 hours I have gotten on dogepool.net: 1.43321785 Dodge and for this current block I'm getting:

DOGE Estimates
Block   2.01645427
Fees   0
Donation   0
Payout   2.01645427

This still seems really low, 3.4 Dodge PER 3 HOURS? Or roughly 1 Dodge per hour??? That's not good at all as over 24 hours it would be worth 0.024 USD???

Thoughts?

ltcifc

sr. member

Activity: 344

Merit: 250

Definitely something is wrong.

ocminer

legendary

Activity: 2688

Merit: 1240

Quote from: smariner on February 01, 2014, 05:46:57 PM

Here's my results on dogepool.net after about 30 minutes(at 750Kh/s):

Round Shares Submitted shares since last found block (ie. round shares)
Est. Shares   2583756 (done: 91.58%)
Pool Valid   2366300
Your Valid   4
Pool Invalid   61892
Your Invalid   1

DOGE Estimates
Block   0.16904027
Fees   0
Donation   0
Payout   0.16904027

So is that Block size for dogecoins in blocks of 50 or are they SINGLE dogecoins?

Sorry so many questions, just want to be sure my math is correct.

Something must be wrong if you have only 4 valid shares in 30 minutes.

What does cgminer says under the A: column ? How many accepted shares do you see there.

Also I dont understand your question, the Block Size can't be estimated, since it is something between 1 and 1.000.000 but the stats are based on the last block we found. So with 4 valid shares, you would get 0.169 DOGE if the next block would have the same amount of the last block.

ManeBjorn

legendary

Activity: 1288

Merit: 1004

I would let it run for at least an hour then the stats will be more level it will be easier to tell then.

Quote from: smariner on February 01, 2014, 05:46:57 PM

Here's my results on dogepool.net after about 30 minutes(at 750Kh/s):

Round Shares Submitted shares since last found block (ie. round shares)
Est. Shares   2583756 (done: 91.58%)
Pool Valid   2366300
Your Valid   4
Pool Invalid   61892
Your Invalid   1

DOGE Estimates
Block   0.16904027
Fees   0
Donation   0
Payout   0.16904027

So is that Block size for dogecoins in blocks of 50 or are they SINGLE dogecoins?

Sorry so many questions, just want to be sure my math is correct.

smariner

newbie

Activity: 7

Merit: 0

Here's my results on dogepool.net after about 30 minutes(at 750Kh/s):

Round Shares Submitted shares since last found block (ie. round shares)
Est. Shares   2583756 (done: 91.58%)
Pool Valid   2366300
Your Valid   4
Pool Invalid   61892
Your Invalid   1

DOGE Estimates
Block   0.16904027
Fees   0
Donation   0
Payout   0.16904027

So is that Block size for dogecoins in blocks of 50 or are they SINGLE dogecoins?

Sorry so many questions, just want to be sure my math is correct.

ManeBjorn

legendary

Activity: 1288

Merit: 1004

Sometimes a lower I instead of max seems to give fewer errors or rejects and even can increase the WU a bit.
I actually have my card I set to 14 on the HD 8500 and an I of 15 on my R7 250 which gives me 115 kh/s. On my R7 250 higher I resulted in only 90kh/s.

Quote from: smariner on February 01, 2014, 05:33:25 PM

I'm wondering if I have a incorrect setting in my config file then, for my SAPPHIRE R9 290 Tri-X I'm using:

cgminer --scrypt -o stratum+tcp://pool.dogepool.net:4444 -u XXX -p XXX -I 20

Is it that the intensity=20 should be changed or should I be using different options??? Again, I'm getting 756.7Kh/s, which is pretty good for this card. Thoughts?

Thank you in advance!

smariner

newbie

Activity: 7

Merit: 0

I'm wondering if I have a incorrect setting in my config file then, for my SAPPHIRE R9 290 Tri-X I'm using:

cgminer --scrypt -o stratum+tcp://pool.dogepool.net:4444 -u XXX -p XXX -I 20

Is it that the intensity=20 should be changed or should I be using different options??? Again, I'm getting 756.7Kh/s, which is pretty good for this card. Thoughts?

Thank you in advance!

ManeBjorn

legendary

Activity: 1288

Merit: 1004

smariner

newbie

Activity: 7

Merit: 0

I've been running on dogepool.net for about 20 minutes and have 2 blocks accepted. I'm getting 756.7Kh/s average. However the site says I'm only getting 5Kh/s(from the dashboard). Any suggestions on how to speed this up or is the dashboard incorrect. Seems a bit slow. Here's the cgminer output:

cgminer version 3.7.2 - Started: [2014-02-01 16:57:41]
--------------------------------------------------------------------------------
(5s):700.2K (avg):756.0Kh/s | A:48 R:32 HW:17310 WU:2.7/m
ST: 2 SS: 0 NB: 25 LW: 167 GF: 0 RF: 0
Connected to pool.dogepool.net diff 16 with stratum as user XXXXXXXXXXX
Block: 5b7122be... Diff:1.26K Started: [17:22:01] Best share: 463
--------------------------------------------------------------------------------
[P]ool management [G]PU management ettings [D]isplay options [Q]uit
GPU 0: 77.0C 2637RPM | 755.5K/758.1Kh/s | A:48 R:32 HW:17355 WU:2.7/m I:20
--------------------------------------------------------------------------------

[2014-02-01 17:12:58] Stratum from pool 0 detected new block
[2014-02-01 17:13:37] Pool 0 difficulty changed to 16
[2014-02-01 17:13:37] Accepted 8d891853 Diff 463/32 GPU 0
[2014-02-01 17:13:39] Accepted 0ca0e9db Diff 20/16 GPU 0
[2014-02-01 17:13:44] Stratum from pool 0 detected new block
[2014-02-01 17:14:55] Stratum from pool 0 detected new block
[2014-02-01 17:15:00] Stratum from pool 0 detected new block
[2014-02-01 17:16:55] Stratum from pool 0 detected new block
[2014-02-01 17:19:35] Stratum from pool 0 detected new block
[2014-02-01 17:19:55] Stratum from pool 0 detected new block
[2014-02-01 17:21:00] Stratum from pool 0 detected new block
[2014-02-01 17:21:05] Stratum from pool 0 detected new block
[2014-02-01 17:22:01] Stratum from pool 0 detected new block

ocminer

legendary

Activity: 2688

Merit: 1240

thats waaaayyy too low

try https://www.dogepool.net for 24h and tell the difference

smariner

newbie

Activity: 7

Merit: 0

I need a sanity check, I'm using megamultipool.com as a pool. I've got a R9 290 and it running at 765.0Kh/s however after 12 hours I've received:

DOGE estimates
Block: 6.89760376
Fees: 0.06937178
Payout: 6.86780657

SO, is the payout in this case ONLY 6.867 Dogecoins?

Which is ONLY 0.001460 USD * 6.867 = 0.01 USD over 12 hours

This seems EXTREMELY LOW compared to the the average USD that is on http://www.coinwarz.com/ for Dogecoins.

Any thoughts or is my math off?

Thank you in advance!

Coinpooler

newbie

Activity: 42

Merit: 0

Doge Coinpooler

Now operating at 0% fee! Cheesy

Topic: Best Dogecoin pool - page 3. (Read 94530 times)