- Pool option #cksuggest to use CKPool-compatible mining.suggest_difficulty stratum extension.
Could you please explain how to use this command? I do not see it in the readme and it does not appear to be a command line option. Thank you!
Topic: BFGMiner 5.5.0: CPU/GPU/FPGA/ASIC mining software, GBT+Stratum, RPC, Linux/Win64 - page 32. (Read 834507 times)
October 27, 2015, 02:46:42 PM
Could you please explain how to use this command? I do not see it in the readme and it does not appear to be a command line option. Thank you!
October 26, 2015, 01:11:35 PM
Upgrade to version 5.4.0 complete, successfully able to adjust compac frequency on the command line via the --set compac:clock command, thanks for the update!
October 26, 2015, 11:40:44 AM
Can I change the voltage of Gridseed orbs and Zeus Blizzards(Gaw Fury) using the new BFGMiner or do I have to actually go in and put new resistors in them?
October 25, 2015, 05:19:38 AM
--set antminer@\\.\COM10:voltage=xNNNN or --set antminer@/dev/ttyUSB1:voltage=xNNNN
Another option is to program the CP2102 chip so they have unique serial numbers; this method would avoid problems with the device showing up on different tty/COM locations after reboot/hotplug.
./cp210x-program -w -F eeprom-content.AntU3-custom.hex --set-product-string='Antminer U3' --set-serial-number=myveryown0001
Then you can use --set antminer@myveryown0001:voltage=xNNNN
Another option is to program the CP2102 chip so they have unique serial numbers; this method would avoid problems with the device showing up on different tty/COM locations after reboot/hotplug.
./cp210x-program -w -F eeprom-content.AntU3-custom.hex --set-product-string='Antminer U3' --set-serial-number=myveryown0001
Then you can use --set antminer@myveryown0001:voltage=xNNNN
Thanks Luke.
I chose the first option as it is safer. I did a quick test and it looks like the separate settings on a single BFGMiner process work fine.
However I am still confused why BFGMiner only successfully applies the settings to AMU 0a and AMU 1a. Applying the settings to the rest of the AMUs give "Unknown option" as if the rest of the AMUs have not been detected, but they have actually already been doing the hashing. Please have a look on the relevant messages on the debug log below.
This behaviour happens also on the previous BFGMiner versions which I have already reported on your issue log
Code:
[2015-10-25 10:03:16] Timers: Using clock_gettime(CLOCK_MONOTONIC)
[2015-10-25 10:03:16] Global quota greatest common denominator set to 1
[2015-10-25 10:03:16] Global quota greatest common denominator set to 1
[2015-10-25 10:03:16] Global quota greatest common denominator set to 1
[2015-10-25 10:03:16] setrlimit: Soft fd limit not being changed from 1024 (FD_SETSIZE=1024; hard limit=4096)
[2015-10-25 10:03:16] Started bfgminer 5.4.0-a5fbaee
[2015-10-25 10:03:16] Loaded configuration file /etc/bfgminer/bfgminer.conf
[2015-10-25 10:03:16] lowlevel_scan: Found vcom device at dev_t:000000000000bc01 (path=/dev/ttyUSB1, vid=0000, pid=0000, manuf=Silicon Labs, prod=CP2102 USB to UART Bridge Controller, serial=0001)
[2015-10-25 10:03:16] lowlevel_scan: Found vcom device at dev_t:000000000000bc00 (path=/dev/ttyUSB0, vid=0000, pid=0000, manuf=Silicon Labs, prod=CP2102 USB to UART Bridge Controller, serial=0001)
[2015-10-25 10:03:16] AMU: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:chip=BM1382
[2015-10-25 10:03:16] AMU: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:chip=BM1382
[2015-10-25 10:03:16] AMU: Applying rule antminer@/dev/ttyUSB0:chip=BM1382: Unknown option: chip
[2015-10-25 10:03:16] AMU: Applying rule antminer@/dev/ttyUSB1:chip=BM1382: Unknown option: chip
[2015-10-25 10:03:16] AMU: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:voltage=x820
[2015-10-25 10:03:16] AMU: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:voltage=x830
[2015-10-25 10:03:16] AMU: Applying rule antminer@/dev/ttyUSB0:voltage=x820: Unknown option: voltage
[2015-10-25 10:03:16] AMU: Applying rule antminer@/dev/ttyUSB1:voltage=x830: Unknown option: voltage
[2015-10-25 10:03:16] AMU: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:clock=x0782
[2015-10-25 10:03:16] AMU: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:clock=x0882
[2015-10-25 10:03:16] AMU: Applying rule antminer@/dev/ttyUSB0:clock=x0782: Unknown option: clock
[2015-10-25 10:03:16] AMU: Applying rule antminer@/dev/ttyUSB1:clock=x0882: Unknown option: clock
[2015-10-25 10:03:16] AMU: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:timing=0.0166
[2015-10-25 10:03:16] AMU: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:timing=0.0154
[2015-10-25 10:03:16] (null): Init: mode=value read_timeout_ms=70 limit=0ms Hs=1.660000e-11
[2015-10-25 10:03:16] (null): Init: mode=value read_timeout_ms=65 limit=0ms Hs=1.540000e-11
[2015-10-25 10:03:16] AMU: Applied rule antminer@/dev/ttyUSB0:timing=0.0166
[2015-10-25 10:03:16] AMU: Applied rule antminer@/dev/ttyUSB1:timing=0.0154
[2015-10-25 10:03:16] antminer: Attempting to open /dev/ttyUSB0
[2015-10-25 10:03:16] antminer: Attempting to open /dev/ttyUSB1
[2015-10-25 10:03:16] Acquired exclusive advisory lock on /dev/ttyUSB0
[2015-10-25 10:03:16] Acquired exclusive advisory lock on /dev/ttyUSB1
[2015-10-25 10:03:16] antminer: Test succeeded at /dev/ttyUSB1: got 000187a2
[2015-10-25 10:03:16] /dev/ttyUSB1: Init: mode=value read_timeout_ms=75 limit=0ms Hs=1.540000e-11
[2015-10-25 10:03:16] antminer: Test succeeded at /dev/ttyUSB0: got 000187a2
[2015-10-25 10:03:16] /dev/ttyUSB0: Init: mode=value read_timeout_ms=75 limit=0ms Hs=1.660000e-11
[2015-10-25 10:03:16] Acquired exclusive advisory lock on /dev/ttyUSB1
[2015-10-25 10:03:16] antminer: Work division not specified - autodetecting
[2015-10-25 10:03:16] Acquired exclusive advisory lock on /dev/ttyUSB0
[2015-10-25 10:03:16] antminer: Work division not specified - autodetecting
[2015-10-25 10:03:16] antminer: Work division autodetection got 417c0f36 (=4)
[2015-10-25 10:03:16] Found AMU 0 at /dev/ttyUSB1
[2015-10-25 10:03:16] AMU 0: Init: baud=115200 work_division=0 fpga_count=0
[2015-10-25 10:03:16] antminer: Work division autodetection got 417c0f36 (=4)
[2015-10-25 10:03:16] Found AMU 1 at /dev/ttyUSB0
[2015-10-25 10:03:16] AMU 1: Init: baud=115200 work_division=0 fpga_count=0
[2015-10-25 10:03:16] Probing for an alive pool
.
.
[2015-10-25 10:03:18] Acquired exclusive advisory lock on /dev/ttyUSB0
[2015-10-25 10:03:18] Acquired exclusive advisory lock on /dev/ttyUSB1
[2015-10-25 10:03:18] AMU 1: Opened /dev/ttyUSB0
[2015-10-25 10:03:18] AMU 0: Opened /dev/ttyUSB1
[2015-10-25 10:03:18] AMU 1a: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:chip=BM1382
[2015-10-25 10:03:18] AMU 0a: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:chip=BM1382
[2015-10-25 10:03:18] AMU 1a: Applied rule antminer@/dev/ttyUSB0:chip=BM1382
[2015-10-25 10:03:18] AMU 0a: Applied rule antminer@/dev/ttyUSB1:chip=BM1382
[2015-10-25 10:03:18] AMU 1a: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:voltage=x820
[2015-10-25 10:03:18] AMU 0a: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:voltage=x830
[2015-10-25 10:03:18] AMU 1a: Set voltage: aab820dc
[2015-10-25 10:03:18] AMU 0a: Set voltage: aab830d2
[2015-10-25 10:03:18] AMU 1a: Set voltage: OK
[2015-10-25 10:03:18] AMU 0a: Set voltage: OK
[2015-10-25 10:03:18] AMU 1a: Applied rule antminer@/dev/ttyUSB0:voltage=x820
[2015-10-25 10:03:18] AMU 0a: Applied rule antminer@/dev/ttyUSB1:voltage=x830
[2015-10-25 10:03:18] AMU 1a: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:clock=x0782
[2015-10-25 10:03:18] AMU 0a: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:clock=x0882
[2015-10-25 10:03:18] AMU 1a: Set clock: 82078211
[2015-10-25 10:03:18] AMU 0a: Set clock: 8208821c
[2015-10-25 10:03:18] AMU 1a: Set clock: OK
[2015-10-25 10:03:18] AMU 0a: Set clock: OK
.
.
[2015-10-25 10:03:19] AMU 1a: Applied rule antminer@/dev/ttyUSB0:clock=x0782
[2015-10-25 10:03:19] AMU 1a: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:timing=0.0166
[2015-10-25 10:03:19] AMU 1: Init: mode=value read_timeout_ms=70 limit=0ms Hs=1.660000e-11
[2015-10-25 10:03:19] AMU 1a: Applied rule antminer@/dev/ttyUSB0:timing=0.0166
[2015-10-25 10:03:19] Popping ping in miner thread
[2015-10-25 10:03:19] AMU 1a: Popping work from get queue to get work
[2015-10-25 10:03:19] AMU 1a: Got work 28 from get queue to get work for thread 4
[2015-10-25 10:03:19] AMU 1a: Popping work from get queue to get work
[2015-10-25 10:03:19] AMU 1a: Got work 30 from get queue to get work for thread 4
[2015-10-25 10:03:19] Selecting pool 0 for work
[2015-10-25 10:03:19] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f170000000000000000d761fc9c1feee8471858bce06127aa8f889a5a3bba1c3cdd8ebabb324e6fb60c562c9ac718120f1400000000
[2015-10-25 10:03:19] Work job_id 1445763783 268221 nonce2 0000000b
[2015-10-25 10:03:19] Generated stratum work
[2015-10-25 10:03:19] Pushing work 49 from pool 0 to hash queue
[2015-10-25 10:03:19] Selecting pool 0 for work
[2015-10-25 10:03:19] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f1700000000000000002954de775ae95c729bd8b02639ddb03e5371fdc6631d832a478c5db21cee6171562c9ac718120f1400000000
[2015-10-25 10:03:19] Work job_id 1445763783 268221 nonce2 0000000c
[2015-10-25 10:03:19] Generated stratum work
[2015-10-25 10:03:19] Pushing work 51 from pool 0 to hash queue
[2015-10-25 10:03:19] AMU 0a: Applied rule antminer@/dev/ttyUSB1:clock=x0882
[2015-10-25 10:03:19] AMU 0a: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:timing=0.0154
[2015-10-25 10:03:19] AMU 0: Init: mode=value read_timeout_ms=65 limit=0ms Hs=1.540000e-11
[2015-10-25 10:03:19] AMU 0a: Applied rule antminer@/dev/ttyUSB1:timing=0.0154
[2015-10-25 10:03:19] Popping ping in miner thread
[2015-10-25 10:03:19] AMU 0a: Popping work from get queue to get work
[2015-10-25 10:03:19] Selecting pool 0 for work
[2015-10-25 10:03:19] AMU 0a: Got work 32 from get queue to get work for thread 0
[2015-10-25 10:03:19] AMU 0a: Popping work from get queue to get work
[2015-10-25 10:03:19] AMU 0a: Got work 34 from get queue to get work for thread 0
[2015-10-25 10:03:19] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f17000000000000000042a0e0015675d28ec8706965b1d48839ee55d90035f43c16a44014b5baca6102562c9ac718120f1400000000
[2015-10-25 10:03:19] Work job_id 1445763783 268221 nonce2 0000000d
[2015-10-25 10:03:19] Generated stratum work
[2015-10-25 10:03:19] Pushing work 54 from pool 0 to hash queue
[2015-10-25 10:03:19] Selecting pool 0 for work
[2015-10-25 10:03:19] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f170000000000000000a3a4cbf1fd1cd771258ea559d71819adf543590ad030214b9ceb6bc42d8f2432562c9ac718120f1400000000
[2015-10-25 10:03:19] Work job_id 1445763783 268221 nonce2 0000000e
[2015-10-25 10:03:19] Generated stratum work
[2015-10-25 10:03:19] Pushing work 56 from pool 0 to hash queue
[2015-10-25 10:03:19] AMU 1: No data in 0.070 seconds
[2015-10-25 10:03:19] AMU 1 no nonce = 0xfde05485 hashes (0.070705s)
[2015-10-25 10:03:19] [thread 4: 1064834337 hashes, 1783498.1 khash/sec]
[2015-10-25 10:03:19] [thread 5: 1064834337 hashes, 1782274.2 khash/sec]
[2015-10-25 10:03:19] [thread 6: 1064834337 hashes, 1781290.4 khash/sec]
[2015-10-25 10:03:19] [thread 7: 1064834337 hashes, 1780343.3 khash/sec]
[2015-10-25 10:03:19] AMU 1a: Popping work from get queue to get work
[2015-10-25 10:03:19] AMU 1a: Got work 36 from get queue to get work for thread 4
[2015-10-25 10:03:19] Selecting pool 0 for work
[2015-10-25 10:03:19] AMU 0: No data in 0.065 seconds
[2015-10-25 10:03:19] AMU 0 no nonce = 0xfe082a93 hashes (0.065634s)
[2015-10-25 10:03:19] [thread 0: 1065487012 hashes, 1773119.5 khash/sec]
[2015-10-25 10:03:19] [thread 1: 1065487012 hashes, 1772161.0 khash/sec]
[2015-10-25 10:03:19] [thread 2: 1065487012 hashes, 1771215.4 khash/sec]
[2015-10-25 10:03:19] [thread 3: 1065487012 hashes, 1769917.8 khash/sec]
[2015-10-25 10:03:19] AMU 0a: Popping work from get queue to get work
[2015-10-25 10:03:19] AMU 0a: Got work 38 from get queue to get work for thread 0
.
.
[2015-10-25 10:03:20] Pushing work 248 from pool 0 to hash queue
[2015-10-25 10:03:20] AMU 0b: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:chip=BM1382
[2015-10-25 10:03:20] AMU 0b: Applying rule antminer@/dev/ttyUSB1:chip=BM1382: Unknown option: chip
[2015-10-25 10:03:20] AMU 0b: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:voltage=x830
[2015-10-25 10:03:20] AMU 0b: Applying rule antminer@/dev/ttyUSB1:voltage=x830: Unknown option: voltage
[2015-10-25 10:03:20] AMU 0b: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:clock=x0882
[2015-10-25 10:03:20] AMU 0b: Applying rule antminer@/dev/ttyUSB1:clock=x0882: Unknown option: clock
[2015-10-25 10:03:20] AMU 0b: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:timing=0.0154
[2015-10-25 10:03:20] AMU 0: Init: mode=value read_timeout_ms=65 limit=0ms Hs=1.540000e-11
[2015-10-25 10:03:20] AMU 0b: Applied rule antminer@/dev/ttyUSB1:timing=0.0154
[2015-10-25 10:03:20] AMU 0c: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:chip=BM1382
[2015-10-25 10:03:20] AMU 0c: Applying rule antminer@/dev/ttyUSB1:chip=BM1382: Unknown option: chip
[2015-10-25 10:03:20] Proof: 000000000ec78112c82dd0f9865a86a2bfdba31b231ce410826e5e07107979d0
Target: 000000000080000000ffffffffffffffffffffffffffffffffffffffffffffff
TrgVal? no (false positive; hash > target)
[2015-10-25 10:03:20] AMU 0b nonce = 0x9e9b662d = 0x7a6d98b8 hashes (0.042419s; 0.020651ns/hash)
[2015-10-25 10:03:20] AMU 0a: Popping work from get queue to get work
[2015-10-25 10:03:20] AMU 0a: Got work 215 from get queue to get work for thread 0
[2015-10-25 10:03:20] Selecting pool 0 for work
[2015-10-25 10:03:20] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f1700000000000000005f03657abd63c441d2d88668e21ab4d5bd625604cf0d73137c25c8ca9aee5366562c9ac918120f1400000000
[2015-10-25 10:03:20] Work job_id 1445763783 268221 nonce2 00000045
[2015-10-25 10:03:20] Generated stratum work
[2015-10-25 10:03:20] Pushing work 252 from pool 0 to hash queue
[2015-10-25 10:03:20] AMU 0c: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:voltage=x830
[2015-10-25 10:03:20] AMU 0c: Applying rule antminer@/dev/ttyUSB1:voltage=x830: Unknown option: voltage
[2015-10-25 10:03:20] AMU 0c: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:clock=x0882
[2015-10-25 10:03:20] AMU 0c: Applying rule antminer@/dev/ttyUSB1:clock=x0882: Unknown option: clock
[2015-10-25 10:03:20] AMU 0c: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:timing=0.0154
[2015-10-25 10:03:20] AMU 0: Init: mode=value read_timeout_ms=65 limit=0ms Hs=1.540000e-11
[2015-10-25 10:03:20] AMU 0c: Applied rule antminer@/dev/ttyUSB1:timing=0.0154
[2015-10-25 10:03:20] AMU 0d: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:chip=BM1382
[2015-10-25 10:03:20] AMU 0d: Applying rule antminer@/dev/ttyUSB1:chip=BM1382: Unknown option: chip
[2015-10-25 10:03:20] AMU 0d: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:voltage=x830
[2015-10-25 10:03:20] AMU 0d: Applying rule antminer@/dev/ttyUSB1:voltage=x830: Unknown option: voltage
[2015-10-25 10:03:20] AMU 0d: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:clock=x0882
[2015-10-25 10:03:20] AMU 0d: Applying rule antminer@/dev/ttyUSB1:clock=x0882: Unknown option: clock
[2015-10-25 10:03:20] AMU 0d: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB1:timing=0.0154
[2015-10-25 10:03:20] AMU 0: Init: mode=value read_timeout_ms=65 limit=0ms Hs=1.540000e-11
[2015-10-25 10:03:20] AMU 0d: Applied rule antminer@/dev/ttyUSB1:timing=0.0154
[2015-10-25 10:03:20] AMU 1b: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:chip=BM1382
[2015-10-25 10:03:20] AMU 1b: Applying rule antminer@/dev/ttyUSB0:chip=BM1382: Unknown option: chip
[2015-10-25 10:03:20] AMU 1b: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:voltage=x820
[2015-10-25 10:03:20] AMU 1b: Applying rule antminer@/dev/ttyUSB0:voltage=x820: Unknown option: voltage
[2015-10-25 10:03:20] AMU 1b: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:clock=x0782
[2015-10-25 10:03:20] AMU 1b: Applying rule antminer@/dev/ttyUSB0:clock=x0782: Unknown option: clock
[2015-10-25 10:03:20] AMU 1b: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:timing=0.0166
[2015-10-25 10:03:20] AMU 1: Init: mode=value read_timeout_ms=70 limit=0ms Hs=1.660000e-11
[2015-10-25 10:03:20] AMU 1: No data in 0.070 seconds
[2015-10-25 10:03:20] AMU 1 no nonce = 0xffffffff hashes (0.073224s)
[2015-10-25 10:03:20] AMU 1a: Popping work from get queue to get work
[2015-10-25 10:03:20] AMU 1a: Got work 218 from get queue to get work for thread 4
[2015-10-25 10:03:20] AMU 1b: Applied rule antminer@/dev/ttyUSB0:timing=0.0166
[2015-10-25 10:03:20] AMU 1c: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:chip=BM1382
[2015-10-25 10:03:20] AMU 1c: Applying rule antminer@/dev/ttyUSB0:chip=BM1382: Unknown option: chip
[2015-10-25 10:03:20] AMU 1c: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:voltage=x820
[2015-10-25 10:03:20] AMU 1c: Applying rule antminer@/dev/ttyUSB0:voltage=x820: Unknown option: voltage
[2015-10-25 10:03:20] AMU 1c: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:clock=x0782
[2015-10-25 10:03:20] AMU 1c: Applying rule antminer@/dev/ttyUSB0:clock=x0782: Unknown option: clock
[2015-10-25 10:03:20] AMU 1c: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:timing=0.0166
[2015-10-25 10:03:20] AMU 1: Init: mode=value read_timeout_ms=70 limit=0ms Hs=1.660000e-11
[2015-10-25 10:03:20] AMU 1c: Applied rule antminer@/dev/ttyUSB0:timing=0.0166
[2015-10-25 10:03:20] AMU 1d: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:chip=BM1382
[2015-10-25 10:03:20] AMU 1d: Applying rule antminer@/dev/ttyUSB0:chip=BM1382: Unknown option: chip
[2015-10-25 10:03:20] AMU 1d: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:voltage=x820
[2015-10-25 10:03:20] Proof: 00000000ce067bbb184e2ae94392ff077c30b1bd5183578c79f0c32b1e9fedc4
Target: 000000000080000000ffffffffffffffffffffffffffffffffffffffffffffff
TrgVal? no (false positive; hash > target)
[2015-10-25 10:03:20] AMU 1d: Applying rule antminer@/dev/ttyUSB0:voltage=x820: Unknown option: voltage
[2015-10-25 10:03:20] Selecting pool 0 for work
[2015-10-25 10:03:20] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f170000000000000000f770d4dd440bfab53cf9bec6615aa75a2ac43c7d93f55a1f4ab4acb7a5f07e50562c9ac918120f1400000000
[2015-10-25 10:03:20] Work job_id 1445763783 268221 nonce2 00000046
[2015-10-25 10:03:20] Generated stratum work
[2015-10-25 10:03:20] Pushing work 256 from pool 0 to hash queue
[2015-10-25 10:03:20] AMU 1d: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:clock=x0782
[2015-10-25 10:03:20] AMU 1d: Applying rule antminer@/dev/ttyUSB0:clock=x0782: Unknown option: clock
[2015-10-25 10:03:20] AMU 1d: cgpu_set_defaults: Matched with set default: antminer@/dev/ttyUSB0:timing=0.0166
[2015-10-25 10:03:20] AMU 1: Init: mode=value read_timeout_ms=70 limit=0ms Hs=1.660000e-11
[2015-10-25 10:03:20] AMU 1d: Applied rule antminer@/dev/ttyUSB0:timing=0.0166
[2015-10-25 10:03:20] Proof: 00000000e72af197a0311e702b1800e40c05a65248b99a27c5a37b70c29cb154
Target: 000000000080000000ffffffffffffffffffffffffffffffffffffffffffffff
TrgVal? no (false positive; hash > target)
[2015-10-25 10:03:20] AMU 0c nonce = 0x4db7f099 = 0x36dfc268 hashes (0.022755s; 0.024716ns/hash)
[2015-10-25 10:03:20] AMU 0a: Popping work from get queue to get work
[2015-10-25 10:03:20] Selecting pool 0 for work
[2015-10-25 10:03:20] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f17000000000000000025d37b380cbb1cb3cf11a92bc9b491359a0113cdc9b8786a2a75233c7d22f666562c9ac918120f1400000000
[2015-10-25 10:03:20] Work job_id 1445763783 268221 nonce2 00000047
[2015-10-25 10:03:20] Generated stratum work
[2015-10-25 10:03:20] Pushing work 260 from pool 0 to hash queue
[2015-10-25 10:03:20] AMU 0a: Got work 222 from get queue to get work for thread 0
[2015-10-25 10:03:20] Proof: 00000000f10556f4b434e52f8a790cdbb62f7592b4afb937be6e429287b0e3d0
Target: 000000000080000000ffffffffffffffffffffffffffffffffffffffffffffff
TrgVal? no (false positive; hash > target)
[2015-10-25 10:03:20] AMU 0b nonce = 0xa4b21840 = 0x92c86104 hashes (0.049522s; 0.020109ns/hash)
[2015-10-25 10:03:20] AMU 0a: Popping work from get queue to get work
[2015-10-25 10:03:20] AMU 0a: Got work 226 from get queue to get work for thread 0
[2015-10-25 10:03:20] Selecting pool 0 for work
[2015-10-25 10:03:20] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f1700000000000000007ba4356ce4cac0eebb053e6b178c2fc11699b1b76e16f7a5523cb911149c8d52562c9ac918120f1400000000
[2015-10-25 10:03:20] Work job_id 1445763783 268221 nonce2 00000048
[2015-10-25 10:03:20] Generated stratum work
[2015-10-25 10:03:20] Pushing work 264 from pool 0 to hash queue
[2015-10-25 10:03:20] AMU 1: No data in 0.070 seconds
[2015-10-25 10:03:20] AMU 1 no nonce = 0xffffffff hashes (0.074678s)
[2015-10-25 10:03:20] AMU 1a: Popping work from get queue to get work
[2015-10-25 10:03:20] Selecting pool 0 for work
[2015-10-25 10:03:20] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f170000000000000000fe82944fb6314a5ab72e478e213534f2a657ccebe0d450094551b27ccbb27257562c9ac918120f1400000000
[2015-10-25 10:03:20] Work job_id 1445763783 268221 nonce2 00000049
[2015-10-25 10:03:20] Generated stratum work
[2015-10-25 10:03:20] Pushing work 267 from pool 0 to hash queue
[2015-10-25 10:03:20] AMU 1a: Got work 229 from get queue to get work for thread 4
[2015-10-25 10:03:21] Proof: 00000000dd1124883494930ef7322c8fc79cb1203ef481e797b1dfd9ad86e945
Target: 000000000080000000ffffffffffffffffffffffffffffffffffffffffffffff
TrgVal? no (false positive; hash > target)
[2015-10-25 10:03:21] AMU 0d nonce = 0xd58b01fe = 0x562c07fc hashes (0.031866s; 0.022041ns/hash)
[2015-10-25 10:03:21] [thread 0: 2794483981 hashes, 12931554.2 khash/sec]
[2015-10-25 10:03:21] [thread 1: 2794483975 hashes, 12974061.0 khash/sec]
[2015-10-25 10:03:21] [thread 2: 2794483975 hashes, 12991613.2 khash/sec]
[2015-10-25 10:03:21] [thread 3: 2794483975 hashes, 12993123.3 khash/sec]
[2015-10-25 10:03:21] AMU 0a: Popping work from get queue to get work
[2015-10-25 10:03:21] AMU 0a: Got work 233 from get queue to get work for thread 0
[2015-10-25 10:03:21] Selecting pool 0 for work
[2015-10-25 10:03:21] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f17000000000000000087047955c6516d8b6e4b04eddf86f77b9b96a1a3b3832d8e39743f141e8b315a562c9ac918120f1400000000
[2015-10-25 10:03:21] Work job_id 1445763783 268221 nonce2 0000004a
[2015-10-25 10:03:21] Generated stratum work
[2015-10-25 10:03:21] Pushing work 271 from pool 0 to hash queue
[2015-10-25 10:03:21] Proof: 00000000d0b236547a13cb1446b070e50aeb3d091a49ac856b01ebee52de8124
Target: 000000000080000000ffffffffffffffffffffffffffffffffffffffffffffff
TrgVal? no (false positive; hash > target)
[2015-10-25 10:03:21] AMU 0d nonce = 0xe624c5fb = 0x989317f0 hashes (0.051139s; 0.019977ns/hash)
[2015-10-25 10:03:21] AMU 0a: Popping work from get queue to get work
[2015-10-25 10:03:21] AMU 0a: Got work 238 from get queue to get work for thread 0
[2015-10-25 10:03:21] Selecting pool 0 for work
[2015-10-25 10:03:21] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f1700000000000000007e191cd6335fae4dfbe30830a29739a6c36ce4e710825b989df85158d94efb3c562c9ac918120f1400000000
[2015-10-25 10:03:21] Work job_id 1445763783 268221 nonce2 0000004b
[2015-10-25 10:03:21] Generated stratum work
[2015-10-25 10:03:21] Pushing work 275 from pool 0 to hash queue
[2015-10-25 10:03:21] AMU 1: No data in 0.072 seconds
[2015-10-25 10:03:21] AMU 1 no nonce = 0xffffffff hashes (0.075469s)
[2015-10-25 10:03:21] [thread 4: 3221225475 hashes, 14397501.5 khash/sec]
[2015-10-25 10:03:21] [thread 5: 3221225469 hashes, 14396986.7 khash/sec]
[2015-10-25 10:03:21] [thread 6: 3221225469 hashes, 14396793.7 khash/sec]
[2015-10-25 10:03:21] [thread 7: 3221225469 hashes, 14396665.0 khash/sec]
[2015-10-25 10:03:21] AMU 1a: Popping work from get queue to get work
[2015-10-25 10:03:21] Selecting pool 0 for work
[2015-10-25 10:03:21] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f170000000000000000c3ed4a0e9100594e15baca1e8f6148ad6a01c4fef35a8fc580fa6171e18ed655562c9ac918120f1400000000
[2015-10-25 10:03:21] AMU 1a: Got work 240 from get queue to get work for thread 4
[2015-10-25 10:03:21] Work job_id 1445763783 268221 nonce2 0000004c
[2015-10-25 10:03:21] Generated stratum work
[2015-10-25 10:03:21] Pushing work 278 from pool 0 to hash queue
[2015-10-25 10:03:21] Proof: 000000005ecde78e4a0e5a4402ae12a134332c2f042ec93398f79f7dedc1591c
Target: 000000000080000000ffffffffffffffffffffffffffffffffffffffffffffff
TrgVal? no (false positive; hash > target)
[2015-10-25 10:03:21] AMU 1a nonce = 0x1d3bb57d = 0x74eed5f8 hashes (0.045042s; 0.022959ns/hash)
[2015-10-25 10:03:21] AMU 1a: Popping work from get queue to get work
[2015-10-25 10:03:21] AMU 1a: Got work 244 from get queue to get work for thread 4
[2015-10-25 10:03:21] Selecting pool 0 for work
[2015-10-25 10:03:21] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f17000000000000000013ad0555fa0c5118312c79fe26b4fb813dc2ed1a6f3c31b0e164b9eb4465bab3562c9ac918120f1400000000
[2015-10-25 10:03:21] Work job_id 1445763783 268221 nonce2 0000004d
[2015-10-25 10:03:21] Generated stratum work
[2015-10-25 10:03:21] Pushing work 282 from pool 0 to hash queue
[2015-10-25 10:03:21] Proof: 000000002455a96296ffad1a3ad96f08e337b08024f1f01b3d92ddaf685e06bf
Target: 000000000080000000ffffffffffffffffffffffffffffffffffffffffffffff
TrgVal? no (false positive; hash > target)
[2015-10-25 10:03:21] AMU 1d nonce = 0xc1221739 = 0x04885ce8 hashes (0.008261s; 0.108632ns/hash)
[2015-10-25 10:03:21] AMU 1a: Popping work from get queue to get work
[2015-10-25 10:03:21] Selecting pool 0 for work
[2015-10-25 10:03:21] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f170000000000000000435cee43db1dbec8943b49b3e8a0508fb99465513aa9a78bf17210a54febc351562c9ac918120f1400000000
[2015-10-25 10:03:21] Work job_id 1445763783 268221 nonce2 0000004e
[2015-10-25 10:03:21] Generated stratum work
[2015-10-25 10:03:21] Pushing work 286 from pool 0 to hash queue
[2015-10-25 10:03:21] AMU 1a: Got work 248 from get queue to get work for thread 4
[2015-10-25 10:03:21] AMU 0: No data in 0.065 seconds
[2015-10-25 10:03:21] AMU 0 no nonce = 0xffffffff hashes (0.066456s)
[2015-10-25 10:03:21] AMU 0a: Popping work from get queue to get work
[2015-10-25 10:03:21] AMU 0a: Got work 252 from get queue to get work for thread 0
[2015-10-25 10:03:21] Selecting pool 0 for work
[2015-10-25 10:03:21] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f170000000000000000f861e36c3d65a0e737a82b7473eb6ab69deea01c688b6f40eb2560c193472217562c9ac918120f1400000000
[2015-10-25 10:03:21] Work job_id 1445763783 268221 nonce2 0000004f
[2015-10-25 10:03:21] Generated stratum work
[2015-10-25 10:03:21] Pushing work 289 from pool 0 to hash queue
[2015-10-25 10:03:21] Proof: 00000000102051ff343fdbda6e052b8b7f34f781d7b5a289d4ba21d854f434c2
Target: 000000000080000000ffffffffffffffffffffffffffffffffffffffffffffff
TrgVal? no (false positive; hash > target)
[2015-10-25 10:03:21] AMU 0d nonce = 0xd44f2222 = 0x513c888c hashes (0.030387s; 0.022295ns/hash)
[2015-10-25 10:03:21] AMU 0a: Popping work from get queue to get work
[2015-10-25 10:03:21] Selecting pool 0 for work
[2015-10-25 10:03:21] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f170000000000000000c1c900961fcf80dcca04234ba7e14597a5a41022d5797cc2bd002910fd31d7e0562c9ac918120f1400000000
[2015-10-25 10:03:21] Work job_id 1445763783 268221 nonce2 00000050
[2015-10-25 10:03:21] Generated stratum work
[2015-10-25 10:03:21] Pushing work 293 from pool 0 to hash queue
[2015-10-25 10:03:21] AMU 0a: Got work 256 from get queue to get work for thread 0
[2015-10-25 10:03:21] Proof: 00000000770972370ff57612b632cd79b2f3473d35a0e59ce4a16c4dcd987f77
Target: 000000000080000000ffffffffffffffffffffffffffffffffffffffffffffff
TrgVal? no (false positive; hash > target)
[2015-10-25 10:03:21] AMU 1d nonce = 0xe8715a19 = 0xa1c56868 hashes (0.059761s; 0.022018ns/hash)
[2015-10-25 10:03:21] AMU 1a: Popping work from get queue to get work
[2015-10-25 10:03:21] Selecting pool 0 for work
[2015-10-25 10:03:21] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f170000000000000000b3af42624ea2f4d596d5703b6323ae16174a1728474bb1c16270fbcf93e3e87e562c9ac918120f1400000000
[2015-10-25 10:03:21] Work job_id 1445763783 268221 nonce2 00000051
[2015-10-25 10:03:21] Generated stratum work
[2015-10-25 10:03:21] Pushing work 297 from pool 0 to hash queue
[2015-10-25 10:03:21] AMU 1a: Got work 260 from get queue to get work for thread 4
[2015-10-25 10:03:21] Proof: 00000000dfd7f09242013360e0b86a16a9a298734988fcfaf0272b3e8566c1c0
Target: 000000000080000000ffffffffffffffffffffffffffffffffffffffffffffff
TrgVal? no (false positive; hash > target)
[2015-10-25 10:03:21] Proof: 00000000c020277efdf0ff3140676068144dd64ac08d9f4c6b1ce52d9c43b853
Target: 000000000080000000ffffffffffffffffffffffffffffffffffffffffffffff
TrgVal? no (false positive; hash > target)
[2015-10-25 10:03:21] AMU 0c nonce = 0x5b1186ed = 0x6c461bb8 hashes (0.038258s; 0.021060ns/hash)
[2015-10-25 10:03:21] AMU 0a: Popping work from get queue to get work
[2015-10-25 10:03:21] AMU 0a: Got work 264 from get queue to get work for thread 0
[2015-10-25 10:03:21] Selecting pool 0 for work
[2015-10-25 10:03:21] AMU 1b nonce = 0x87ec203e = 0x1fb080fc hashes (0.017147s; 0.032251ns/hash)
[2015-10-25 10:03:21] AMU 1a: Popping work from get queue to get work
[2015-10-25 10:03:21] AMU 1a: Got work 267 from get queue to get work for thread 4
[2015-10-25 10:03:21] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f17000000000000000017082c9422c6d4ed492ad06ab3cc81f873f0db8b87f75053170b55a52f9ac91c562c9ac918120f1400000000
[2015-10-25 10:03:21] Work job_id 1445763783 268221 nonce2 00000052
[2015-10-25 10:03:21] Generated stratum work
[2015-10-25 10:03:21] Pushing work 303 from pool 0 to hash queue
[2015-10-25 10:03:21] Selecting pool 0 for work
[2015-10-25 10:03:21] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f17000000000000000038947ee630ce2b8735c70ea66f5ac0623e984f46b0e5ad570997c1ebcfbd83ce562c9ac918120f1400000000
[2015-10-25 10:03:21] Work job_id 1445763783 268221 nonce2 00000053
[2015-10-25 10:03:21] Generated stratum work
[2015-10-25 10:03:21] Pushing work 305 from pool 0 to hash queue
[2015-10-25 10:03:21] AMU 0: No data in 0.065 seconds
[2015-10-25 10:03:21] AMU 0 no nonce = 0xffffffff hashes (0.066485s)
[2015-10-25 10:03:21] [thread 0: 3582291726 hashes, 14141924.9 khash/sec]
[2015-10-25 10:03:21] [thread 1: 3582291723 hashes, 14141310.8 khash/sec]
[2015-10-25 10:03:21] [thread 2: 3582291723 hashes, 14141478.3 khash/sec]
[2015-10-25 10:03:21] [thread 3: 3582291723 hashes, 14141869.1 khash/sec]
[2015-10-25 10:03:21] AMU 0a: Popping work from get queue to get work
[2015-10-25 10:03:21] AMU 0a: Got work 271 from get queue to get work for thread 0
[2015-10-25 10:03:21] Selecting pool 0 for work
[2015-10-25 10:03:21] Generated stratum header 000000036643340b65d5f75d19183aa5ed4ac1a7704ff8440cf82f170000000000000000af2e4defa0ffa72bebe77955b2bc797e91505a6e618ba432165bda894d0b7550562c9ac918120f1400000000
[2015-10-25 10:03:21] Work job_id 1445763783 268221 nonce2 00000054
[2015-10-25 10:03:21] Generated stratum work
[2015-10-25 10:03:21] Pushing work 308 from pool 0 to hash queue
[2015-10-25 10:03:21] AMU 1: No data in 0.070 seconds
[2015-10-25 10:03:21] AMU 1 no nonce = 0xffffffff hashes (0.074872s)
[2015-10-25 10:03:21] [thread 4: 2394638099 hashes, 11630836.3 khash/sec]
[2015-10-25 10:03:21] [thread 5: 2394638096 hashes, 11630666.9 khash/sec]
[2015-10-25 10:03:21] [thread 6: 2394638096 hashes, 11615378.3 khash/sec]
[2015-10-25 10:03:21] [thread 7: 2394638096 hashes, 11613969.9 khash/sec]
[2015-10-25 10:03:21] AMU 1a: Popping work from get queue to get work
[2015-10-25 10:03:21] AMU 1a: Got work 275 from get queue to get work for thread 4
[2015-10-25 10:03:21] Selecting pool 0 for work
.
.
[2015-10-25 10:07:02] Summary of per device statistics:
[2015-10-25 10:07:02] AMU0 | 30s:55.95 avg:55.99 u:56.33 Gh/s | A:7 R:0+0(none) HW:0/none
[2015-10-25 10:07:02] AMU0a | 30s:13.99 avg:14.00 u:13.68 Gh/s | A:1 R:0+0(none) HW:0/none
[2015-10-25 10:07:02] AMU0b | 30s:13.99 avg:14.03 u:14.62 Gh/s | A:2 R:0+0(none) HW:0/none
[2015-10-25 10:07:02] AMU0c | 30s:13.99 avg:14.03 u:13.97 Gh/s | A:3 R:0+0(none) HW:0/none
[2015-10-25 10:07:02] AMU0d | 30s:13.99 avg:14.03 u:14.16 Gh/s | A:1 R:0+0(none) HW:0/none
[2015-10-25 10:07:02] AMU1 | 30s:52.12 avg:51.97 u:50.48 Gh/s | A:7 R:0+0(none) HW:0/none
[2015-10-25 10:07:02] AMU1a | 30s:13.03 avg:12.99 u:12.78 Gh/s | A:3 R:0+0(none) HW:0/none
[2015-10-25 10:07:02] AMU1b | 30s:13.03 avg:13.03 u:13.47 Gh/s | A:0 R:0+0(none) HW:0/none
[2015-10-25 10:07:02] AMU1c | 30s:13.03 avg:13.03 u:12.12 Gh/s | A:1 R:0+0(none) HW:0/none
[2015-10-25 10:07:02] AMU1d | 30s:13.03 avg:13.03 u:12.21 Gh/s | A:3 R:0+0(none) HW:0/none
[2015-10-25 10:07:02]
Shutdown signal received.
October 25, 2015, 03:41:57 AM
BTW, anyone want to go and update README with all these tips I've been dropping on the forum thread(s)? :p
October 25, 2015, 03:39:32 AM
--set bfl:voltage= should work. You really don't want to set it on all devices though - they can be very different in what is sane there - so just use bfl.
This is actually what I would like to be able to do on my 2 AntMiner U3' as each of them does not behave the same on a single setting of frequency and voltage. How would I be able to set different frequency and voltage settings for each miner on a single BFGMiner process?
I know that the workaround for this is to have 2 separate BFGMiner processes to manage the 2 miners individually.
Another option is to program the CP2102 chip so they have unique serial numbers; this method would avoid problems with the device showing up on different tty/COM locations after reboot/hotplug.
./cp210x-program -w -F eeprom-content.AntU3-custom.hex --set-product-string='Antminer U3' --set-serial-number=myveryown0001
Then you can use --set antminer@myveryown0001:voltage=xNNNN
October 25, 2015, 01:56:44 AM
--set bfl:voltage= should work. You really don't want to set it on all devices though - they can be very different in what is sane there - so just use bfl.
This is actually what I would like to be able to do on my 2 AntMiner U3' as each of them does not behave the same on a single setting of frequency and voltage. How would I be able to set different frequency and voltage settings for each miner on a single BFGMiner process?
I know that the workaround for this is to have 2 separate BFGMiner processes to manage the 2 miners individually.
October 24, 2015, 07:31:39 PM
Is there a way to put the voltage in the bfgminer.conf file now that bfgminer supports changing voltages? And if so what format? I set the cutoff temp like this "set-device" : [ "all:temp-cutoff=78"] and wonder if something similar for voltage?
--set bfl:voltage= October 24, 2015, 05:21:07 PM
Is there a way to put the voltage in the bfgminer.conf file now that bfgminer supports changing voltages? And if so what format? I set the cutoff temp like this "set-device" : [ "all:temp-cutoff=78"] and wonder if something similar for voltage?
Also, they go down in voltage well but going up in voltage the program, I won't say locks up but, can't get out of the Manage devices screen untill I force it to quit and even then it doesn't release it for about a minute or so.
Again, great feature!
Also, they go down in voltage well but going up in voltage the program, I won't say locks up but, can't get out of the Manage devices screen untill I force it to quit and even then it doesn't release it for about a minute or so.
Again, great feature!
October 24, 2015, 02:23:01 AM
cairnsmore, compac, erupter, and icarus are all tied in with antminer, so you won't be able to skip them.
Thanks Luke. That is not quite important though. I just want reduce the size of BFGMiner package to the minimum that is possible.
October 23, 2015, 05:19:07 PM
I just compiled BFGMiner 5.4.0 and it works fine managing my 2 AntMiner U3'.
However, I actually only want to have antminer driver for connecting to stratum server. I tried to disable all drivers but icarus using the configure option below.
Code:
CONFIGURE_ARGS += --disable-other-drivers
CONFIGURE_ARGS += --enable-icarus
But as we can see above, other drivers are still being included. How do I actually disable all drivers but only the ones for Antminer U3?
October 23, 2015, 03:49:20 PM
I understand newest version is 5.4 has bug been fixed as you report toptek?
will it hurt adding --enable-gridseed in addtion no it won't . I don't because it is on by default im not saying don't, if you feel better doing it, then do it
. it may even help thu i have yet to see were it does . for sure add it if your having issue with any grindseed miner ..
You already mention --enable-broad-udevrules just few post above, I'm wondering, will it hurt adding --enable-gridseed in addtion?
I understand luke mentions about a bug and I quess I'll wait alse!
IM gettting 5.2 as the biuld to but then up a few post luke said that's a bug so we wait i guess .
so i need to learn cross comping or use it on my PC as zip file and go that route and compile to my PI that way.
I understand luke mentions about a bug and I quess I'll wait alse!
I built bfgminer from source today on a Raspberry Pi and the version returned from the resulting binary is 5.2 instead of 5.3:
This was a completely clean checkout and the usual configure, make, make install pattern:
Is this just a cosmetic problem with the version number, or is 5.3 not really on the git trunk?
Code:
./bfgminer --version
bfgminer 5.2.0-9-g484db74
This was a completely clean checkout and the usual configure, make, make install pattern:
Code:
git clone https://github.com/luke-jr/bfgminer.git
cd bfgminer/
./autogen.sh
./configure --enable-scrypt --enable-broad-udevrules
make
sudo make install
sudo ldconfig
Is this just a cosmetic problem with the version number, or is 5.3 not really on the git trunk?
IM gettting 5.2 as the biuld to but then up a few post luke said that's a bug so we wait i guess .
so i need to learn cross comping or use it on my PC as zip file and go that route and compile to my PI that way.
will it hurt adding --enable-gridseed in addtion no it won't . I don't because it is on by default im not saying don't, if you feel better doing it, then do it
. it may even help thu i have yet to see were it does . for sure add it if your having issue with any grindseed miner .. October 23, 2015, 12:18:54 PM
I just compiled BFGMiner 5.4.0 and it works fine managing my 2 AntMiner U3'.
However, I actually only want to have antminer driver for connecting to stratum server. I tried to disable all drivers but icarus using the configure option below.
Code:
CONFIGURE_ARGS += --disable-other-drivers
CONFIGURE_ARGS += --enable-icarus
But as we can see above, other drivers are still being included. How do I actually disable all drivers but only the ones for Antminer U3?
October 23, 2015, 12:10:11 PM
- bitforce: Enable changing voltage from the Manage TUI
Thank you for this it works great with my monarchs! I've got two of them that go over 920ghs and this will come in handy in the summer.
October 23, 2015, 11:03:22 AM
The KnCMiner Jupiter instructions in README.ASIC might work on the S5 (but change --enable-knc to --enable-bitmain)
October 23, 2015, 10:52:54 AM
Luke
question does this mean i can compile it on a PI then tar it then put it on the S5 then run it .
BFGMiner must be compiled for and run on the embedded controller
I want to use BFG on my S5 right now i don't care how i do it .
Smit1237 said he would put one to gather for us in a image , till then do it like above . i know what the command line is, if so .other wise, I'm lost till i learn more .
question does this mean i can compile it on a PI then tar it then put it on the S5 then run it .
BFGMiner must be compiled for and run on the embedded controller
I want to use BFG on my S5 right now i don't care how i do it .
Smit1237 said he would put one to gather for us in a image , till then do it like above . i know what the command line is, if so .other wise, I'm lost till i learn more
. October 23, 2015, 10:07:37 AM
Im on nice hash right now with my amd card and isuing those driver but using sgminer inside that folder is a runme.bat that does its all for you all you have to do is edit the sgminer-profitswitch.conf and put you BTC adress in place of the ones in there . then run the runme.bat, i did try to mine script with my amd and bfg 5.4 it just won't cut it any more .
GPU 0: 75.0C 2799RPM | 7.074M/7.211Mh/s | R: 0.0% HW:0 WU:0.081/m xI: 64
GPU 0: 76.0C 2780RPM | 7.472M/7.477Mh/s | R: 0.0% HW:0 WU:0.110/m xI: 64
got a little more out of it kept about the same temps
you also may have to change one or two setting in the sgminer-profitswitch.conf for the fan and heat . my amd card did the same it wouldn't hash using BFG and script only .
I not even OC right i can polly get that up to 8.1 MH and stay around 75 to 76 C with water cooling even higher .
to me 76 C is to hot , I m not going to water cool it no need to . i don't plan to GPU mine unless it starts paying big time which might happen sense the EU declared Bitcoins to be a form of cash .
The amd driver version 15.10 Beta which is the CC version with the drivers version 15.201.1151.1005-151012a-295347E-ATI ? .
GL for now that's about as far as I'll take my Video card .
GPU 0: 75.0C 2799RPM | 7.074M/7.211Mh/s | R: 0.0% HW:0 WU:0.081/m xI: 64
GPU 0: 76.0C 2780RPM | 7.472M/7.477Mh/s | R: 0.0% HW:0 WU:0.110/m xI: 64
got a little more out of it kept about the same temps
you also may have to change one or two setting in the sgminer-profitswitch.conf for the fan and heat
. my amd card did the same it wouldn't hash using BFG and script only .I not even OC right i can polly get that up to 8.1 MH and stay around 75 to 76 C with water cooling even higher .
to me 76 C is to hot , I m not going to water cool it no need to . i don't plan to GPU mine unless it starts paying big time which might happen sense the EU declared Bitcoins to be a form of cash
.The amd driver version 15.10 Beta which is the CC version with the drivers version 15.201.1151.1005-151012a-295347E-ATI ? .
GL for now that's about as far as I'll take my Video card .
October 23, 2015, 09:21:43 AM
October 22, 2015, 11:21:44 PM
NEW VERSION 5.4.0, OCTOBER 23 2015
Human readable changelog:
Full changelog:
Human readable changelog:
- RPC: Ability to change pool management strategy.
- Pool option #cksuggest to use CKPool-compatible mining.suggest_difficulty stratum extension.
- alchemist: New scrypt ASIC driver, written and maintained by jstefanop (requires custom FPGA reprogramming).
- antminer, avalon, compac, hashfast, and jingtian: Support for setting clock frequency from the TUI's device management interface.
- antminer & compac: Support for setting clock by frequency MHz.
- bitforce: Ability to change voltages from RPC and TUI.
- bitmain: New driver for Bitmain Antminer S-series units (up to S5).
Full changelog:
- AUTHORS: Move jstefanop to current maintainers
- Disable alchemist by default, add Travis build, and document configure option in README
- alchemist: New scrypt ASIC driver
- hashfast: Support setting clock speed from TUI Manage
- avalon: Support setting clock speed from TUI Manage
- antminer: Support setting clock speed from TUI Manage (hidden for non-BM1382/4 devices)
- jingtian: Allow changing clock speed from TUI
- Debuglog for retrodiff being disabled
- Disable retrodiff when it was not explicitly enabled, and the pool doesn't seem to like it
- Bugfix: Only adjust work_difficulty on retrodiff submissions, so we can still detect them on rejection
- (Re-)enable retrodiff by default for stratum pools, since some servers implement mining.set_difficulty wrong in this way
- New pool option "retrodiff"
- If a share passes difficulty check for the updated pool target, record that target for correct accounting of diff_stale.
- DevAPI: Remove unused temporary variable from driver iteration
- README.ASIC: Expand Antminer S5 section to S1-S5 for completeness, since in theory they should work
- bitmain: Make reg_data optional for S4 and S5, calculating it from clock
- Document Bitmain Antminer S5 support
- bitmain: Remove poll_prio_threshold and just ensure we poll at a regular interval to avoid nonce buffer overruns
- bitmain: Remove dead per-device constants
- bitmain: Only have one set of actual maximums
- bitmain: Migrate BITMAIN_MAX_NONCE_NUM to runtime packet_max_nonce
- bitmain: Migrate BITMAIN_MAX_WORK_QUEUE_NUM/bitmain_work_poll_prio to runtime poll_prio_threshold
- bitmain: Migrate BITMAIN_MAX_WORK_NUM to runtime packet_max_work
- bitmain: Dummy model parameter
- bitmain: Remove baud/flush, as the fake VCOM kernel driver ignores (and complains about) both
- bitmain: Poll after queuing work, once enough is queued
- bitmain: Sleep a little between polling
- bitmain: Flush queues for work restarts
- bitmain: Queue multiple works at a time
- bitmain: Remove more dead code
- bitmain: Prune old work eventually
- Bugfix: bitmain: Properly count work-search failures as HW errors
- bitmain: Refactor to work with minerloop_queue (leaks work memory)
- bitmain: Avoid busy-looping on network devices
- bitmain: Support for talking to a device over the network
- bitmain: Use the hottest reading for device temperature
- Bugfix: bitmain: Actually use baud setting
- bitmain: Remove more dead code
- bitmain: Handle stale results normally
- bitmain: Simplify num2bit
- bitmain: Initial set-device based configuration
- bitmain: Use lowl-vcom abstractions
- Update copyrights
- Bugfix: bitmain: Type-safe printf-format usage
- Travis: Test bitmain-only build
- Build bitmain driver
- bitmain: Hardcode configuration for now
- bitmain: Rework nonce_diff handling
- bitmain: Update headers
- bitmain: Deal with unused variable warnings sanely
- bitmain: Explicitly de-const device_path for freeing
- Bugfix: bitmain: Correct type of cgpu->temp reference
- Bugfix: bitmain: Use uint8_t consistently for binary data
- Bugfix: bitmain: Clear opt_bitmain_dev string properly
- bitmain: Remove non-existent bitmain_detect parameter
- bitmain: Cleanup unnecessary code
- bitmain: Use uthash to find queued work
- bitmain: Implement inc_dev_status within record_temp_fan
- bitmain: Remove non-applicable limits
- bitmain: Remove obsolete get_statline_before function
- bitmain: Move g_miner_version to bitmain_info struct
- bitmain: Remove direct USB code
- bitmain: Update driver registration
- bitmain: Update symbol names
- bitmain: Remove dead code
- bitmain: Replace custom hexdump with normal bin2hex
- bitmain: Get network difficulty from first work task
- bitmain: No-op htole8
- bitmain: Simulate cgminer work_block somewhat
- bitmain: Update bin2hex usage for malloc-free version
- bitmain: Copy low-level code from Bitmain cgminer usbutils
- Copy working driver-bitmain.c from Bitmain's cgminer at commit 4ecf89341657ea7efecdf588586ca3f068ab17ab
- Add api_add_percent to miner.h
- Bugfix: DevAPI: Update includes from uthash to utlist and support older versions of uthash
- Bugfix: RPC: Need to include utlist.h for config file list
- Bugfix: antminer: Avoid NULL dereference for non-BM1382/4 devices
- README.ASIC: Update documentation for BM1382/4 clock calculation support
- antminer: Support for setting BM1382/4 clock by frequency MHz
- Bugfix: Keep JSON from getaccountaddress around long enough for debug messages
- Bugfix: Run gen-version.sh from source directory
- Fix to enable building into directory out of source tree
- Bugfix: Clean up JSON from getaccountaddress
- Bugfix: Do not use hash tables for driver lists, since they require unique keys
- Pool option #cksuggest to use CKPool-compatible mining.suggest_difficulty
- RPC: Add "Rotate Period" to config
- RPC: Extend setconfig to change strategy
- Allow setting strategy by name
- bitforce: Enable changing voltage from the Manage TUI
- avalonmm: Use proc_set_device_tui_wrapper instead of avalonmm_tui_wrapper
- DevAPI: Add generic proc_set_device_tui_wrapper
- bitforce: Add "voltage" setting to send V?X commands
- Bugfix: compac: Set dname so assignments match
- README.RPC: Add missing setconfig|stratum-port documentation
- README.RPC: Add missing setconfig|http-port documentation
- Bugfix: lowl-vcom: Check for tcgetattr/tcsetattr/tcflush failure
- configure: List compac driver in output
- Travis: Workaround Travis bug
- configure: Use AC_PROG_SED to find sed
October 22, 2015, 12:46:00 PM
Using 5.3.0 to run a couple gekko compac sticks and no matter what value I input for --set compac:clock= the sticks hash as if they were set to 225 (x0882), so at about 11GH/s each. Any idea why the sticks are not taking the frequency setting?
Found this bug. Will fix in 5.4.Workaround: Use --set cbm:clock=x0783 instead.
I forgot to set the "compac" name on the driver... :|
Wonderful, thank you! Now I have to dig up my usb tester and start dialing these sticks up.
edit - I have been unable to produce successful results with the revised cbm command, my sticks still hash at default frequency.
Does it work any better if you use RPC's pgaset?
bfgminer-rpc 'pgaset|cbm0,clock,x0783'
Cross posting to follow up.
Note --set cbm:clock=xNNNN will also work; you just need to abbreviate it "cbm" and can't spell out "compac".
(That's what is being fixed in 5.4 - being able to spell it out)
(That's what is being fixed in 5.4 - being able to spell it out)
I was unable to get --set cbm:clock=xNNNN to work. I believe you said you used it on the pre-production stick that was sent to you, but I cannot duplicate your success on the production stick.
Can anyone else with a prod unit confirm/deny a problem?
I can't imagine what would be different.. :|
Ahh, could be. I was thinking the leading 0 issue was with the RPC command, I do not recall if I used a leading 0 on the --set as well. I will confirm tomorrow.
As an aside, the RPC way of adjusting frequency is pretty darn cool since you can do it while they are running. Couple that with the adjustable voltage, also while running, and you've got real time feedback from a very customizable piece of hardware!
You were right, I must have been using the leading 0 in my command line because without it --set cbm:clock worked perfectly. But like I said above, I still think the RPC way to do it is cool and useful.
Jump to: