Bitcoin Forum>Other>Off-topic
Pages:
Author

Topic: BFL "EasyMiner" Released. Reviews? (Read 21494 times)

Epoch
legendary
Activity: 922
Merit: 1003
BFL "EasyMiner" Released. Reviews?
June 02, 2012, 12:39:46 AM
#112
Quote from: bitcoindaddy on June 01, 2012, 10:16:19 PM
Quote from: Epoch on June 01, 2012, 08:55:30 PM
EasyMiner needs the Microsoft .NET runtime in order to run; works with .NET 2.0, but might as well install the latest (.NET 4.0) and you should be good to go.

It loads fine, but doesn't recognize the BFL or the drivers aren't right. The BFL never shows up in the list.

Sounds like you are missing the FTDI driver for the virtual COM port, and you don't have driver auto-download enabled in your Win7 installation.

Note that this driver is NOT packaged with Windows, but is downloaded automatically by Windows Update as soon as the device is detected. The problem is that, by default, new Windows installs do not have this feature enabled.

Unplug your Single, enable the driver auto-download feature in Windows, reboot, and plug the Single back in. Windows should then detect it and download the driver automatically from the Windows Update server.
bitcoindaddy
hero member
Activity: 481
Merit: 500
Re: BFL "EasyMiner" Released. Reviews?
June 01, 2012, 10:16:19 PM
#111
Quote from: Epoch on June 01, 2012, 08:55:30 PM
EasyMiner needs the Microsoft .NET runtime in order to run; works with .NET 2.0, but might as well install the latest (.NET 4.0) and you should be good to go.


It loads fine, but doesn't recognize the BFL or the drivers aren't right. The BFL never shows up in the list.
rjk
sr. member
Activity: 448
Merit: 250
1ngldh
Re: BFL "EasyMiner" Released. Reviews?
June 01, 2012, 08:59:35 PM
#110
Wonder if it would be possible to port to Mono and/or run in Wine.
Epoch
legendary
Activity: 922
Merit: 1003
Re: BFL "EasyMiner" Released. Reviews?
June 01, 2012, 08:55:30 PM
#109
Quote from: bitcoindaddy on June 01, 2012, 07:56:16 PM
Has anyone got EasyMiner to work on Windows 7 64-bit?  I've tried everything I can think of.
EasyMiner needs the Microsoft .NET runtime in order to run; works with .NET 2.0, but might as well install the latest (.NET 4.0) and you should be good to go.
bitcoindaddy
hero member
Activity: 481
Merit: 500
Re: BFL "EasyMiner" Released. Reviews?
June 01, 2012, 07:56:16 PM
#108
Has anyone got EasyMiner to work on Windows 7 64-bit?  I've tried everything I can think of.
Is the "Load VCP" option supposed to be checked? Very annoying not to have a Linux version when most of the serious miners are using Linux.
yjacket
full member
Activity: 202
Merit: 100
Re: BFL "EasyMiner" Released. Reviews?
May 25, 2012, 04:25:35 PM
#107
Quote from: BFL-Engineer on May 25, 2012, 03:46:24 AM
Quote from: yjacket on May 25, 2012, 01:21:01 AM
I've also got the problem with the mining options being greyed out.

BFL: Do you have any guess as what the issue is? I have Windows 7 Home Premium.

Mining feature is still not present in Easyminer. We'll finilize it as soon as our schedule permits us
to do so.


Regards,
BF Labs Inc.

Ah ok, glad that it's not just me then.
BFL-Engineer
full member
Activity: 227
Merit: 100
Re: BFL "EasyMiner" Released. Reviews?
May 25, 2012, 03:46:24 AM
#106
Quote from: yjacket on May 25, 2012, 01:21:01 AM
I've also got the problem with the mining options being greyed out.

BFL: Do you have any guess as what the issue is? I have Windows 7 Home Premium.

Mining feature is still not present in Easyminer. We'll finilize it as soon as our schedule permits us
to do so.


Regards,
BF Labs Inc.
yjacket
full member
Activity: 202
Merit: 100
Re: BFL "EasyMiner" Released. Reviews?
May 25, 2012, 01:21:01 AM
#105
I've also got the problem with the mining options being greyed out.

BFL: Do you have any guess as what the issue is? I have Windows 7 Home Premium.
Phraust
full member
Activity: 206
Merit: 100
Mostly Harmless...
Re: BFL "EasyMiner" Released. Reviews?
May 24, 2012, 03:55:26 PM
#104
Well, I've reflashed the two "bad" singles down to 800, and they are keeping up for now (about 15 minutes in) at 800 mhps. Sad
lightbox
full member
Activity: 212
Merit: 100
Re: BFL "EasyMiner" Released. Reviews?
May 24, 2012, 12:22:56 PM
#103
Quote from: lightbox on May 24, 2012, 12:00:36 PM
Quote from: rjk on May 24, 2012, 11:40:07 AM
Quote from: lightbox on May 24, 2012, 11:37:50 AM
Quote from: Inaba on May 24, 2012, 11:30:36 AM
You probably need to install the FTDI driver if it's a fresh install.

Nope it installed automatically when i plugged in the BFL Single.

Right click Com3->Properties->Driver
Driver Provider: FTDI
Driver Date: 4/10/2012
Driver Version: 2.8.24.0

Actually that reminds me - .Net is an optional feature in Vista that might need to be turned on. If you get Windows Updates and install .Net 4.0 Client Profile, it is backward compatible with apps compiled for .Net 2.0.

Downloading and installing.. taking forever.... will report back when it finishes.

Grr, installed, rebooted, computer wont even get to BIOS or GRUB now... Sad gah! i gotta go do  "real work" now, have to attempt again tomorrow. thanks for all your help so far.
lightbox
full member
Activity: 212
Merit: 100
Re: BFL "EasyMiner" Released. Reviews?
May 24, 2012, 12:00:36 PM
#102
Quote from: rjk on May 24, 2012, 11:40:07 AM
Quote from: lightbox on May 24, 2012, 11:37:50 AM
Quote from: Inaba on May 24, 2012, 11:30:36 AM
You probably need to install the FTDI driver if it's a fresh install.

Nope it installed automatically when i plugged in the BFL Single.

Right click Com3->Properties->Driver
Driver Provider: FTDI
Driver Date: 4/10/2012
Driver Version: 2.8.24.0

Actually that reminds me - .Net is an optional feature in Vista that might need to be turned on. If you get Windows Updates and install .Net 4.0 Client Profile, it is backward compatible with apps compiled for .Net 2.0.

Downloading and installing.. taking forever.... will report back when it finishes.
rjk
sr. member
Activity: 448
Merit: 250
1ngldh
Re: BFL "EasyMiner" Released. Reviews?
May 24, 2012, 11:40:07 AM
#101
Quote from: lightbox on May 24, 2012, 11:37:50 AM
Quote from: Inaba on May 24, 2012, 11:30:36 AM
You probably need to install the FTDI driver if it's a fresh install.

Nope it installed automatically when i plugged in the BFL Single.

Right click Com3->Properties->Driver
Driver Provider: FTDI
Driver Date: 4/10/2012
Driver Version: 2.8.24.0

Actually that reminds me - .Net is an optional feature in Vista that might need to be turned on. If you get Windows Updates and install .Net 4.0 Client Profile, it is backward compatible with apps compiled for .Net 2.0.
lightbox
full member
Activity: 212
Merit: 100
Re: BFL "EasyMiner" Released. Reviews?
May 24, 2012, 11:37:50 AM
#100
Quote from: Inaba on May 24, 2012, 11:30:36 AM
You probably need to install the FTDI driver if it's a fresh install.

Nope it installed automatically when i plugged in the BFL Single.

Right click Com3->Properties->Driver
Driver Provider: FTDI
Driver Date: 4/10/2012
Driver Version: 2.8.24.0
Inaba
legendary
Activity: 1260
Merit: 1000
Re: BFL "EasyMiner" Released. Reviews?
May 24, 2012, 11:30:36 AM
#99
You probably need to install the FTDI driver if it's a fresh install.
rjk
sr. member
Activity: 448
Merit: 250
1ngldh
Re: BFL "EasyMiner" Released. Reviews?
May 24, 2012, 11:24:43 AM
#98
Quote from: lightbox on May 24, 2012, 11:22:49 AM
No its a fresh install -- i shrunk my linux partition, and setup a dualboot with the dell-provided windows vista CD, let it do all its windows updates, downloaded chrome, downloaded easyminer.
If it's just a throwaway install that you will never use again, might as well go with Win7 30 day trial install.
lightbox
full member
Activity: 212
Merit: 100
Re: BFL "EasyMiner" Released. Reviews?
May 24, 2012, 11:22:49 AM
#97
Quote from: BFL-Engineer on May 24, 2012, 11:16:22 AM
Quote from: lightbox on May 24, 2012, 11:13:52 AM
Quote from: BFL-Engineer on May 24, 2012, 11:11:01 AM
Quote from: lightbox on May 24, 2012, 11:08:23 AM
Quote from: BFL-Engineer on May 24, 2012, 10:35:16 AM
Quote from: lightbox on May 24, 2012, 10:29:17 AM
Hi, I have my BFL's up and running but wanted to flash them.. the only windows machine I have here is running VISTA (my normal mining is all on Linux), so i grabbed the EasyMiner_V_1.1_Beta to see if I could flash one with the higher firmware, but cant get it to run.... my device manager shows the one BFL Single i plugged in properly on COM3 (well COM3 appeared when i plug it in), but when I open EasyMiner, (the only option available is "administrative mode") and click "Proceed", I get the windows dialog "BitFORCE-Miner has stopped working  A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"

Any idea how to fix this?

James


Hello James,

One possibility is that windows is denying access to COM port. This can be resolved if you right-click on Easyminer
and click on 'Run as administrator'. Please run this test and let us know how it goes. Of course, I must add that
Windows Vista is probably the worst operating system ever developed since the Big Bang.

Regards,
BF Labs Inc.

Nope still the same problem, I've tried the various compatibility modes as well, still no luck.  Also, tried it on a windowsXP VM i had here (VirtualBox) and get the samet thing!

No arguments from my side about window (especially vista) sucking, so that begs the question, where's the linux based firmware updater?? Smiley I don't want to use your easyminer software to mine, i just want to flash the singles then put them back on my Linux machines.

James


Is there any other COM devices or virtual COM devices connected to your computer?



Regards,
BF Labs Inc.

Nope, only the one listed in Device Manager

->Ports (COM & LPT)
  -> USB Serial Port (COM3)





I must say that this is very strange. Easyminer is compiled under XP with .NET version 2.0. It's the first instance of
such failure. We will investigate the issue and come back with some response. Has this computer ever been infected with
virus or trojans before?


Regards,
BF Labs Inc.

No its a fresh install -- i shrunk my linux partition, and setup a dualboot with the dell-provided windows vista CD, let it do all its windows updates, downloaded chrome, downloaded easyminer.
BFL-Engineer
full member
Activity: 227
Merit: 100
Re: BFL "EasyMiner" Released. Reviews?
May 24, 2012, 11:16:22 AM
#96
Quote from: lightbox on May 24, 2012, 11:13:52 AM
Quote from: BFL-Engineer on May 24, 2012, 11:11:01 AM
Quote from: lightbox on May 24, 2012, 11:08:23 AM
Quote from: BFL-Engineer on May 24, 2012, 10:35:16 AM
Quote from: lightbox on May 24, 2012, 10:29:17 AM
Hi, I have my BFL's up and running but wanted to flash them.. the only windows machine I have here is running VISTA (my normal mining is all on Linux), so i grabbed the EasyMiner_V_1.1_Beta to see if I could flash one with the higher firmware, but cant get it to run.... my device manager shows the one BFL Single i plugged in properly on COM3 (well COM3 appeared when i plug it in), but when I open EasyMiner, (the only option available is "administrative mode") and click "Proceed", I get the windows dialog "BitFORCE-Miner has stopped working  A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"

Any idea how to fix this?

James


Hello James,

One possibility is that windows is denying access to COM port. This can be resolved if you right-click on Easyminer
and click on 'Run as administrator'. Please run this test and let us know how it goes. Of course, I must add that
Windows Vista is probably the worst operating system ever developed since the Big Bang.

Regards,
BF Labs Inc.

Nope still the same problem, I've tried the various compatibility modes as well, still no luck.  Also, tried it on a windowsXP VM i had here (VirtualBox) and get the samet thing!

No arguments from my side about window (especially vista) sucking, so that begs the question, where's the linux based firmware updater?? Smiley I don't want to use your easyminer software to mine, i just want to flash the singles then put them back on my Linux machines.

James


Is there any other COM devices or virtual COM devices connected to your computer?



Regards,
BF Labs Inc.

Nope, only the one listed in Device Manager

->Ports (COM & LPT)
  -> USB Serial Port (COM3)





I must say that this is very strange. Easyminer is compiled under XP with .NET version 2.0. It's the first instance of
such failure. We will investigate the issue and come back with some response. Has this computer ever been infected with
virus or trojans before?


Regards,
BF Labs Inc.
lightbox
full member
Activity: 212
Merit: 100
Re: BFL "EasyMiner" Released. Reviews?
May 24, 2012, 11:13:52 AM
#95
Quote from: BFL-Engineer on May 24, 2012, 11:11:01 AM
Quote from: lightbox on May 24, 2012, 11:08:23 AM
Quote from: BFL-Engineer on May 24, 2012, 10:35:16 AM
Quote from: lightbox on May 24, 2012, 10:29:17 AM
Hi, I have my BFL's up and running but wanted to flash them.. the only windows machine I have here is running VISTA (my normal mining is all on Linux), so i grabbed the EasyMiner_V_1.1_Beta to see if I could flash one with the higher firmware, but cant get it to run.... my device manager shows the one BFL Single i plugged in properly on COM3 (well COM3 appeared when i plug it in), but when I open EasyMiner, (the only option available is "administrative mode") and click "Proceed", I get the windows dialog "BitFORCE-Miner has stopped working  A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"

Any idea how to fix this?

James


Hello James,

One possibility is that windows is denying access to COM port. This can be resolved if you right-click on Easyminer
and click on 'Run as administrator'. Please run this test and let us know how it goes. Of course, I must add that
Windows Vista is probably the worst operating system ever developed since the Big Bang.

Regards,
BF Labs Inc.

Nope still the same problem, I've tried the various compatibility modes as well, still no luck.  Also, tried it on a windowsXP VM i had here (VirtualBox) and get the samet thing!

No arguments from my side about window (especially vista) sucking, so that begs the question, where's the linux based firmware updater?? Smiley I don't want to use your easyminer software to mine, i just want to flash the singles then put them back on my Linux machines.

James


Is there any other COM devices or virtual COM devices connected to your computer?



Regards,
BF Labs Inc.

Nope, only the one listed in Device Manager

->Ports (COM & LPT)
  -> USB Serial Port (COM3)


BFL-Engineer
full member
Activity: 227
Merit: 100
Re: BFL "EasyMiner" Released. Reviews?
May 24, 2012, 11:11:01 AM
#94
Quote from: lightbox on May 24, 2012, 11:08:23 AM
Quote from: BFL-Engineer on May 24, 2012, 10:35:16 AM
Quote from: lightbox on May 24, 2012, 10:29:17 AM
Hi, I have my BFL's up and running but wanted to flash them.. the only windows machine I have here is running VISTA (my normal mining is all on Linux), so i grabbed the EasyMiner_V_1.1_Beta to see if I could flash one with the higher firmware, but cant get it to run.... my device manager shows the one BFL Single i plugged in properly on COM3 (well COM3 appeared when i plug it in), but when I open EasyMiner, (the only option available is "administrative mode") and click "Proceed", I get the windows dialog "BitFORCE-Miner has stopped working  A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"

Any idea how to fix this?

James


Hello James,

One possibility is that windows is denying access to COM port. This can be resolved if you right-click on Easyminer
and click on 'Run as administrator'. Please run this test and let us know how it goes. Of course, I must add that
Windows Vista is probably the worst operating system ever developed since the Big Bang.

Regards,
BF Labs Inc.

Nope still the same problem, I've tried the various compatibility modes as well, still no luck.  Also, tried it on a windowsXP VM i had here (VirtualBox) and get the samet thing!

No arguments from my side about window (especially vista) sucking, so that begs the question, where's the linux based firmware updater?? Smiley I don't want to use your easyminer software to mine, i just want to flash the singles then put them back on my Linux machines.

James


Is there any other COM devices or virtual COM devices connected to your computer?



Regards,
BF Labs Inc.
lightbox
full member
Activity: 212
Merit: 100
Re: BFL "EasyMiner" Released. Reviews?
May 24, 2012, 11:08:23 AM
#93
Quote from: BFL-Engineer on May 24, 2012, 10:35:16 AM
Quote from: lightbox on May 24, 2012, 10:29:17 AM
Hi, I have my BFL's up and running but wanted to flash them.. the only windows machine I have here is running VISTA (my normal mining is all on Linux), so i grabbed the EasyMiner_V_1.1_Beta to see if I could flash one with the higher firmware, but cant get it to run.... my device manager shows the one BFL Single i plugged in properly on COM3 (well COM3 appeared when i plug it in), but when I open EasyMiner, (the only option available is "administrative mode") and click "Proceed", I get the windows dialog "BitFORCE-Miner has stopped working  A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"

Any idea how to fix this?

James


Hello James,

One possibility is that windows is denying access to COM port. This can be resolved if you right-click on Easyminer
and click on 'Run as administrator'. Please run this test and let us know how it goes. Of course, I must add that
Windows Vista is probably the worst operating system ever developed since the Big Bang.

Regards,
BF Labs Inc.

Nope still the same problem, I've tried the various compatibility modes as well, still no luck.  Also, tried it on a windowsXP VM i had here (VirtualBox) and get the samet thing!

No arguments from my side about window (especially vista) sucking, so that begs the question, where's the linux based firmware updater?? Smiley I don't want to use your easyminer software to mine, i just want to flash the singles then put them back on my Linux machines.

James
Pages:
Bitcoin Forum>Other>Off-topic
Jump to: