BFL Jally Not Mining - page 2. | Bitcointalksearch.org

tacoman71

sr. member

Activity: 320

Merit: 250

Quote from: vm1990 on November 03, 2013, 03:18:53 PM

sounds like it is over heating... which country are you based in. if its the UK id have a look at it if your willing to ship it and pay for shipping both ways.

it sounds like the heatsink just isnt sat on the chips correctly (is a pretty common fault) so only part of the chip is connecting with the heatsink
so as the chip heats up the system slows down the speed until its cool enough and over time it works out it cant mine without over heating so just sits there idle

I live in Texas. So I just open it up and take out the heatsink and put it back in place? Does opening it up invalidate the warranty?

EDIT: I tried reseating the heatsink but it still spikes at 48 degrees.

vm1990

legendary

Activity: 1540

Merit: 1002

sounds like it is over heating... which country are you based in. if its the UK id have a look at it if your willing to ship it and pay for shipping both ways.

it sounds like the heatsink just isnt sat on the chips correctly (is a pretty common fault) so only part of the chip is connecting with the heatsink
so as the chip heats up the system slows down the speed until its cool enough and over time it works out it cant mine without over heating so just sits there idle

tacoman71

sr. member

Activity: 320

Merit: 250

Quote from: vm1990 on November 03, 2013, 12:11:04 PM

sounds like theres something wrong with the actual device. probably the heatsink isnt sitting on the chips and there over heating. 3 options
1.take it apart and re sit the heatsink.
2.send back to BFL
3.find someone local or off here to fix it

or sell it

are you using windows or mac?
could always do remote desktop and see if i can find the problem for you

I have a PC running Windows 8.1. I already tried contacting BFL yesterday but there's no response yet. Probably because it's the weekend.

Quote from: Inaba on November 02, 2013, 10:10:41 PM

Is it overheating?

It starts inching up to 37^oC then goes down. At this point I'm still getting shares. Then it goes to 42^oC and down to 38^oC. Then it goes back up to 44^oC. After this, it stops getting accepted shares.

vm1990

legendary

Activity: 1540

Merit: 1002

sounds like theres something wrong with the actual device. probably the heatsink isnt sitting on the chips and there over heating. 3 options
1.take it apart and re sit the heatsink.
2.send back to BFL
3.find someone local or off here to fix it

or sell it

are you using windows or mac?
could always do remote desktop and see if i can find the problem for you

Inaba

legendary

Activity: 1260

Merit: 1000

Is it overheating?

tacoman71

sr. member

Activity: 320

Merit: 250

Quote from: vm1990 on November 02, 2013, 06:13:21 PM

Quote from: tacoman71 on November 02, 2013, 05:35:28 PM

When I try running the windows troubleshooter, it says USB Serial Converter is an older USB device and might not work with USB 3.0

hmmm this is a strange one when you plug it in and it mines does it get accepted shares?
have you tried a standard usb 2 port
is the fan inside the miner working (should be able to hear it easily)

It only gets accepted shares for about a minute, then stops. But the fan is definitely fine. Unfortunately, I don't have a computer with a USB 2.0 port. I tried running bfgminer in ubuntu on Vmware Workstation while limiting USB compatibility within the OS to USB 2.0. Still only produces shares for a minute.

vm1990

legendary

Activity: 1540

Merit: 1002

Quote from: tacoman71 on November 02, 2013, 05:35:28 PM

When I try running the windows troubleshooter, it says USB Serial Converter is an older USB device and might not work with USB 3.0

hmmm this is a strange one when you plug it in and it mines does it get accepted shares?
have you tried a standard usb 2 port
is the fan inside the miner working (should be able to hear it easily)

tacoman71

sr. member

Activity: 320

Merit: 250

When I try running the windows troubleshooter, it says USB Serial Converter is an older USB device and might not work with USB 3.0

tacoman71

sr. member

Activity: 320

Merit: 250

Whenever I unplug the power and plug it back in after 10 seconds, it mines like normal for about a minute. Then it just stops. When I let it cool down for 10 minutes, it still only mines normally for a minute. I tried reinstalling the drivers, nothing. Instead of plugging it into a power strip I plugged it into the wall directly, still nothing. And for some reason, bfgminer reports abnormally high hash rates like 50 GH/s even when I'm not hashing.

vm1990

legendary

Activity: 1540

Merit: 1002

if the above dosnt work try reinstalling the drivers

what does it show up as in device manager?

Inaba

legendary

Activity: 1260

Merit: 1000

That's a very strange error. Have you tried powering off and letting the Jalapeno cool for a bit before repowering it? I've also seen bad power do weird things to it, maybe a bad PSU source? The Jalapeno power bricks are pretty reliable though for the most part.

tacoman71

sr. member

Activity: 320

Merit: 250

Has anyone else had this issue?

tacoman71

sr. member

Activity: 320

Merit: 250

tried btcguild pool and cgminer. Still not hashing. Sometimes it shows this https://www.dropbox.com/s/253lcn9rqcdrq1h/Capture.PNG And apparently i have a 40% hardware error rate and 100% of my nonces are invalid. Did I get a defect?

vm1990

legendary

Activity: 1540

Merit: 1002

use cgminer much better software

reactor

sr. member

Activity: 420

Merit: 250

Quote from: Inaba on November 02, 2013, 11:52:32 AM

Try a different pool and see if you get the same response. That looks like a potential pool error.

Yeah, BTCGuild has been good to my Little Single so far. Hashing away since about ten minutes after USPS dropped it off yesterday.

Inaba

legendary

Activity: 1260

Merit: 1000

Try a different pool and see if you get the same response. That looks like a potential pool error.

tacoman71

sr. member

Activity: 320

Merit: 250

I just got my jally a few days ago. I tried hooking it up to bfgminer, but for some reason, it's not hashing. Sometimes, it will hash for a few seconds, then it will just stop. I tried running it on easyminer, but it wont work. Will someone help me? Here's what bfgminer looks like https://www.dropbox.com/s/253lcn9rqcdrq1h/Capture.PNG

Topic: BFL Jally Not Mining - page 2. (Read 2648 times)